Mep Shark 281 Ccs nakup rabljenega (117)

Stanje: rabljeno, največja višina reza: 280 mm, MEP Shark 280 with micro-spray device chip drawer Blade dimensions: 2950 x 27 x 0.9 mm Maximum cutting capacity: 280 mm Maximum vice opening: 280 mm Vice height: 130 mm 2 cutting speeds Swiveling cut from 0° to 60° automatic lowering manual vice clamping Pedpswza T Tjfx Aaferc coolant pump Voltage: 380 V Width: 900 mm Depth: 1900 mm total height in raised position: 1900 mm Weight: approx. 650 kg

Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: • New centralized control console on an articulated arm for easy operation from any working position. • Low-voltage operating panel: – Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal. – Display for: * Diagnostics (user language messages) Prsdpfx Ascgbq Isafsc * Alarms (alarm cause descriptions) * Input/output status * Cut count * Time used for each cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position. • IP55 manual cycle lever (24 V). • Complete range of special cutting cycles. • Capability for defining further special cycles for specific applications. • New-generation, highly efficient, low-energy hydraulic control unit. • Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing. • Dual blade speed (36/72 m/min) with control. • Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min. • Bow stroke programmable directly from control panel to adapt to the material. • Clamping device laterally adjustable left and right, with quick-release vice. • Manual blade tension control with electronic converter and on-screen display. • Base frame with pull-out coolant tray. • Electric coolant pump for blade cooling and lubrication. • Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil. • Chip removal brush. • Machine suitable for pallet truck transportation. • Length stop for repetitive cuts. • Material support arm with roller, suitable for mounting loading table. • Bimetallic bandsaw blade for solid and profile materials. • Tools and user manual included in user’s language. For further technical data, please refer to the attached PDF document.

Stanje: novo, Cutting diameter: 350 mm Saw blade length: 4640 x 34 x 1.1 mm Cutting width: 350 mm Control: NC 5.0 Band speed: 15 - 100 m/min Cutting range at 0 degrees, round: 350 mm Cutting range at 0 degrees, square: 350 x 350 mm Table height: 860 mm Total power requirement: 4 kW Machine weight approx. 2.8 t Shark 350 NC 5.0, automatic hydraulic band saw in double-column design for 0° cuts up to maximum 350x350 mm. Standard equipment includes: - Driven chip conveyor, can be installed on either side of the machine - Clamping pressure regulation for the vices Podpfx Aaswu Hhdsfsrc - Feeder with vertical rollers for lateral material support - Numerically controlled band saw, can also be operated semi-automatically, featuring the new MEP 50 control system, developed by MEP specifically for automatic machines, Windows "CE" based - "Clean Cut" cycle: the feeder pushes the workpiece back to avoid scoring at the cut surface when the blade rises again at the end of the cut - Fieldbus communication system with dual microprocessor and serial connection - User interface with 7” touchscreen and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters Scope of supply: - Shark 350 NC/CNC HS comes as standard with swarf conveyor - Bi-metal saw band, tool kit - Mounting adapter for infeed roller conveyor - Material chute for removal of short offcuts - Forklift/pallet truck access Machine available from stock, subject to prior sale

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Prsdpfstt Nd Rox Aafec Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Leto izdelave: 2003, Stanje: rabljeno, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg Prodpfx Aora Rrljafec

Stanje: dober (rabljeno), Leto izdelave: 2002, Avtomatska tračna žaga MEP Model: Shark 320 AXI Leto: 2002 Predpfew Na T Ujx Aafoc Kapaciteta okroglo: 260 mm Kapaciteta pri 45 / 60 stopinjah: 230 mm / 150 mm Kapaciteta kvadratno: 320 x 220 mm Hitrost: 40 - 80 m/min

Stanje: novo, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Prodpfx Aechhdisafjc Weight: 1,240 kg Cutting speed: 15 - 100 m/min, steplessly adjustable Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: — Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: — Description Fully automatic hydraulic bandsaw Mitre cuts up to 60° to the left possible Saw blade length: 3650x27x0.9 mm Single stroke: 600 mm (programmable up to 10m) Simple touchscreen operation Saw arm made from spheroidal graphite iron – robust and stable Space requirement: 3.4 m² Footprint: 1900 mm wide x 1800 mm deep For further technical data, please refer to the attached PDF document.

Stanje: zelo dobro (rabljeno), obratovalne ure: 1.170 h, MEP automatische Bandsäge Modell: Shark 310 AX Kapazität rund: 230 mm Kapazität rechteckig: 310 x 220 mm Bandabmessung: 2850 x 27 x 0,9 mm Pjdpfxew Hy Hke Aaforc Betriebsstunden: 1170 Sehr guter Zustand

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: Podschhfuspfx Aaforc SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: novo, MEP SHARK 350 NC HS 5.0 Fully Automatic Double-Column Metal Bandsaw Article number: MEP SHARK 350 NC HS 5.0 Motor power: 4.0 kW Table opening: 355 mm Blade dimensions: 4640 x 34 x 1.1 mm Weight: 2,800 kg Speed: 15 – 115 m/min, stepless Cutting capacity 0°: 350 / 350 x 350 mm Cutting capacity 45° right: Cutting capacity 45° left: Cutting capacity 60° right: Cutting capacity 60° left: Description: Automatic hydraulic bandsaw in double-column design for 0° cuts in solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Prsdpoi Hmcdjfx Aafec Numerically controlled bandsaw, which can also be operated in semi-automatic mode, with the new MEP 50 CNC controller, specially developed by MEP for automatic machines, based on Windows-2 "CE" technology. Standard features include: - Powered swarf conveyor, installable on the right or left side of the machine - Vise clamping pressure regulation - Feeder with vertical rollers for lateral material support - Clamping pressure regulation - Storage for 100 programs - Machine available with 34 mm or 41 mm blade—no extra charge

Stanje: novo, MEP SHARK 382-1 SXI EVO Metal Bandsaw Hydraulic Semi-Automatic. MEP Authorized Dealer – please send us your inquiry Motor power: 1.5 / 1.8 kW Jaw opening: 385 mm Prodpog Hzxijfx Aafec Blade dimensions: 3770 x 27 x 0.9 mm Weight: 695 kg Blade speed: 40/80 m/min Cutting capacity at 0°: 300 / 250x250 / 380x250 mm Cutting capacity at 45° right: 260 / 250x250 / 300x200 mm Cutting capacity at 45° left: 240 / 210x210 / 280x160 mm Cutting capacity at 60° right: 180 / 170x170 / 200x170 mm Cutting capacity at 60° left: Description Electro-hydraulic, semi-automatic bandsaw, featuring both manual and semi-automatic-dynamic operation, suitable for cutting from 45° right to 60° left. Key features: - Pivoting control panel on vertical support column - 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts - Two blade speeds (40/80 m/min)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 2.950 mm, skupna višina: 27 mm, hitrost rezanja: 72 mm/min, Razpon rezanja okroglega jekla pri 45°: 230 mm, največja višina reza: 250 mm, Polavtomatska tračna žaga MEP SHARK 282 SXI Evo Moč motorja: 1,5/1,8 kW Dimenzije traku: 2950x27x0,9 mm Pedpfx Aajw Tau Hjferc Hitrost: 36/72 m/min Rezna površina 0°: 250 / 220x220 / 280x220 mm Rezna površina 45° desno: 230 / 200x200 / 220x200 mm Rezna površina 45° levo: 200 / 170x170 / 200x140 mm Rezna površina 60° desno: 120 / 80x80 / 140x80 mm Stroj je opremljen z valjčnimi stezami: Vhodna stran: 1,5 m Izhodna stran: 3 m z elektronskim prislonom PS3000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih Predpfexdr Rtox Aafsc - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.150 h, Funkcionalnost: popolnoma funkcionalen, MEP TIGER 372 CNC LR 4.0 Metal Circular Saw + CB4001 Magazine High-performance CNC automatic metal circular saw with microprocessor control for cutting from 45° right to 60° left. Manufacturer: MEP Model: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, lightly used Operating hours: 2128 h Cutting time: 1738 h Machine with microprocessor control and two CNC-controlled axes, allowing up to 300 cutting programs on the same material or material in the CB4001 loading magazine, each with its own quantity and length. Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Variable speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Prodpfjxnpggsx Aafjc Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Original documentation – 4 x saw blades

Stanje: dober (rabljeno), Leto izdelave: 2018, Sägeblattdurchmesser 350 x 32 mm Schnittbereich bei 90 Grad: rund 115 mm Schnittbereich bei 90 Grad: vierkant 100 mm Schnittbereich bei 90 Grad: flach 130 x 80 mm Schnittbereich bei 45 Grad: rund 100 mm links Schnittbereich bei 45 Grad: rund 75.0 mm rechts Geschwindigkeit 30 + 60 U/min. Sägeblattabmessungen 350 x 32 mm Maschinengewicht ca. 220 kg laut Vor-Abgeber selten im Einsatz gewesen Prodpfxsxn Anws Aafjc Neupreis ca. 5.000 Euro Sonderpreis auf Anfrage Ausstattung: - elektro-motorische Kaltkreissäge - robuste Gusseisen-Struktur - Getriebe mit Bronzerad und geschliffener/gehärteter - Stahlschnecke in Spezialölbad - manuelle Materialklemmung - Gehrungsverstellung (links + rechts) - elektrische Kühlmittelpumpe zur Kühlung . und Schmierung des Sägeblattes - 1x Sägeblatt Sonderzubehör inklusive : - Unterschrank mit Tür ( Stahluntergestell )

Stanje: dober (rabljeno), Hladna krožna žaga, krožna žaga za kov, kotna žaga, krožna žaga, žagalna naprava, kovinska žaga -Proizvajalec: MEP, hladna krožna žaga za kov tip TRL 300, nagibna na obe strani -Motor: tip C 112 M -Moč: 2,2 / 3,0 kW -Hitrost: 720 / 1450 obr/min -Krožna žaga: Ø 315 mm -Območje reza pri 90 stopinjah plosko: 110 x 70 mm -Območje reza pri 45 stopinjah: 100 mm -Dodatki: vklj. 2 krožna rezila, glejte slike -Mere: 1230/630/V1800 mm -Teža: 273 kg Podjxlzytspfx Aafsrc

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Prodpsfg Rlbsfx Aafjc Saw blade speeds: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.5 kW Machine weight approx. 0.41 t Space requirement approx. 0.8 x 1.0 x 1.85 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head. - New system with vertically guided head sliding on linear guides with ball recirculating rails in the front. - Double gearbox for high transmission power - 4 speeds: 15 / 30 / 45 / 90 rpm - Vice opening: 190 mm - Stroke movement of the saw head programmable directly from the control panel to adjust for cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 350x32x2.5 for solid and profile material - Vice with counterhold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical cuts - Material support arm, also suitable for connection to roller conveyor / loading side - Turntable with additional central axis

Leto izdelave: 1995, Stanje: rabljeno, Maks. premer žaginega lista: 400 mm Pnevmatske vpenjalne naprave za material Psdpfxjxf Hb Ne Aaforc

Leto izdelave: 1998, Stanje: dober (rabljeno), številka stroja/vozila: 080024-38 U, Offer 23332 Technical Specifications: - Saw blade dimensions: 250 x 2 x 40 mm - Saw blade spindle speed: 52 rpm - Cutting capacity at 90° round: 80 mm flat: 95 x 60 mm - Mitre adjustable up to: 45° - Material vice - Drive: 400 V / 0.5 kW - Space requirement approx.: W 650 x H 1500 x D 750 mm Prjdpfxep Ebn Ss Aafec - Weight approx.: 100 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.750 h, Funkcionalnost: popolnoma funkcionalen, MEP Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw Year of manufacture: 2019 Condition: used, very good, tested and cleaned Operating hours: 1750h Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Infinitely variable cutting speed: 15 to 150 rpm Prsdpfx Aasxnpf Aefoc Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Documentation – 2 m infeed roller conveyor – Machine lamp – Chip conveyor – Coolant system

Stanje: novo, Model designation: PH 261-1 HB Predpfx Aael H Dydofsc

Stanje: novo, Saw blade diameter 350 mm Cutting range at 90 degrees: round 115 mm Cutting range at 90 degrees: square 95 mm Cutting range at 90 degrees: rectangular 180 x 95 mm Working height 925 mm Saw blade speeds 15+30+45+90 rpm Total power requirement 1.8/2.5 kW Prsdpefgpdlefx Aafoc Machine weight approx. 0.38 t Space requirement approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Leto izdelave: 2001, Stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: rpm - Cutting capacity - at 90° round: 90 mm - or square: 80 mm - Pneumatic vices - Automatic material feed with position control - Single stroke up to approx. 1000 mm - Multiple stroke - Swiveling operator panel with CNC control MEP Proded Aai Tspfx Aafjc - Motorized dust extraction + mobile chip extraction - Drive: 400 V / 1.1 kW - Required space: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Stanje: novo, Model designation Pedpfol H Dyljx Aaforc PH 262 HB

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Psdpjfg Rlcofx Aaferc Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.