Mchale F 550 nakup rabljenega (35.642)

Stanje: rabljeno, Lippert lead-on, lagging, and belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Data: Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): Speed is adapted to the main conveyor via gear ratio Drive: Timing belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options: Supports Side guides (one-sided or double-sided) Please note: A suitable sprocket must be installed on the output shaft for the timing belt drive. Therefore, a different return roller may be required. Please contact us for further information. Defective belts are replaced before delivery. Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Ksdpfx Ajmqty Ujdkodi Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good used condition and fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery but are optionally available on request. Belt curves are commonly used in intralogistics for in-plant transport of piece goods and are essential components of modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive system across the full belt width, they are suitable for long operating times. Tapered rollers and a specially engineered belt guidance system ensure the highest possible running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius, NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Curve angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Kedpfx Ask Aa Ukodkedi Belt: double-layer, green, smooth, type KT36 Year of construction: 2001 Special features / Accessories: Side guides on both sides included Optionally available: - Support legs - Single or double side guide Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, please get in touch with us. Contact us by phone or email—we are happy to assist you with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 20°-750-550 IR1300 RA1479 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Supports are not included in the delivery scope, but are optionally available upon request. Belt curves are frequently used in intralogistics for in-plant transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating periods pose no problem. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. The photos show the conveyor system still installed at a logistics center. Technical data: Model designation: Belt Curve Conveyor TS 1600-105 Conveying length, middle radius (NL): 640 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support stands and side guides available optionally on both sides Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW geared motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double ply, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Optionally available: Supports Side guide, single-sided and double-sided Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailored, professional advice, feel free to contact us. Simply get in touch with us via phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist partner for Intralogistics Kdodpfxok Abcgj Adksi

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good used condition and fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery but are optionally available on request. Belt curves are commonly used in intralogistics for in-plant transport of piece goods and are essential components of modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive system across the full belt width, they are suitable for long operating times. Tapered rollers and a specially engineered belt guidance system ensure the highest possible running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius, NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Curve angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Kodpsk Abuiefx Adkedi Belt: double-layer, green, smooth, type KT36 Year of construction: 2001 Special features / Accessories: Side guides on both sides included Optionally available: - Support legs - Single or double side guide Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, please get in touch with us. Contact us by phone or email—we are happy to assist you with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Lippert lead-on, lagging, and belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Data: Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): Speed is adapted to the main conveyor via gear ratio Kdsdpfx Aomqty Rodkei Drive: Timing belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options: Supports Side guides (one-sided or double-sided) Please note: A suitable sprocket must be installed on the output shaft for the timing belt drive. Therefore, a different return roller may be required. Please contact us for further information. Defective belts are replaced before delivery. Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for internal transport of unit loads and are indispensable in modern distribution centers. Kdedpfxek Abcro Adkoi Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum smoothness and quiet operation. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 4820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 1000 mm Curve angle: 180° degrees Support legs: optionally available Conveying speed (v m/s): infinitely variable up and down with frequency inverter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layered, green, smooth, KT36 (wear as per pictures) Year of construction: 2001 Special features/accessories: Side guides included on both sides Optionally available: Support legs Net price plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Support stands are not included in the scope of delivery but are available as an option upon request. Belt curve conveyors are frequently used in intralogistics for the internal transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating times are easily achievable. Tapered rollers and a specially designed belt guiding system ensure maximum smoothness in operation. The shown images of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 3,900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees Support feet: optionally available Conveying speed (v m/s): adjustable both up and down via frequency inverter Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double ply, green, smooth Year of construction: 2001 Special features / Accessories: Side guides on both sides included Optionally available: - Support stands - Side guide, either single-sided or double-sided All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Kedpfsk Aa T Rjx Adkodi Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve conveyor is in good (used) condition and fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the delivery scope but are optionally available upon request. Belt curves are commonly used in intralogistics for the internal transport of unit loads and are indispensable components in modern distribution centers. Transnorm belt curves excel in terms of performance and reliability. Thanks to the low-tension drive system across the entire belt width, long operating times are not an issue. Tapered drums and a specially developed belt guiding system ensure the smoothest possible operation. The images shown were taken in the still-installed state of the conveyor system at a logistics center. Technical Data: Model Designation: Belt Curve Conveyor TS 1600-105 Kdsdpfok Aba Tjx Adkei Conveying Length (middle radius, NL): 680 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Installation Height (BH): 210 mm Inner Radius (IR): 600 mm Curve Angle: 45° Support Legs: optionally available Conveying Speed (v m/s): 0.03–1.05 m/s Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz V380-500, kW 0.11/0.55/S1 Belt: double-layered, green, smooth, KT36 (see photos for wear) Year of Manufacture: 2001 Optional Accessories: Supports Side guides, single- or double-sided Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For customized, professional advice, please contact us directly. Reach out by phone or email—we are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2000, Transnorm Belt Curve Conveyor Right GKF 70°-730-550 IR600 RA1936 The Transnorm belt curve is fully functional. It is equipped with a SEW-branded gear motor. Support legs are not included with delivery; these are available optionally on request. Belt curves are widely used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves deliver impressive performance and reliability. The low-tension drive across the entire belt width allows for prolonged operation. Tapered drums and a specially developed belt guidance system ensure maximum running smoothness. Technical Data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inside radius (IR): 600 mm Conveying angle: 70° Support legs: optionally available Conveying speed (v m/s): infinitely adjustable from 0.032 to 1.17 m/s with frequency inverter Drive: SEW gear motor Electrical data: 50Hz, 380–500V, 0.55 kW / S1 Year of manufacture: 2000 Scope of delivery: Without support legs Optionally available: Support legs Side guides (single-sided or double-sided) All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional consultation, please do not hesitate to contact us. Kdodek Ablpopfx Adkoi Contact us by phone or email. We would be pleased to assist you in the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1390 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of supply but are optionally available on request. Belt curve conveyors are frequently used in intralogistics for in-house transportation of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating times present no issue. Tapered rollers and a specially developed belt guidance system ensure maximum smoothness and quiet operation. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying Length (Centerline Radius, NL): 766 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Height (BH): 210 mm Inner Radius (IR): 700 mm Conveying Angle: 45° Support legs: optionally available Conveying Speed (V m/s): 0.03–1.05 m/s Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz, 380-500V, 0.11 / 0.55 kW, S1 Belt: double-layer, green, smooth Year of Manufacture: 2001 Optionally available: Support stands Side guides, single or double-sided All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For tailored, expert advice, please do not hesitate to contact us. Reach out to us by phone or email. We look forward to assisting you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Kdjdek Aa T Hepfx Adksi Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 8.083 h, nosilnost: 5.000 kg, dvižna višina: 4.500 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 3.040 mm, kapaciteta baterije: 930 Ah, napetost baterije: 80 V, Certificirano po DGUV do: 01/2027, dolžina vilic: 1.200 mm, Tip prednje pnevmatike: polne pnevmatike (črne), tip zadnje pnevmatike: polne pnevmatike (črne), Oprema: UVV varnostni pregled, bočni pomik, kabina, osvetlitev, vilice za palete, ✅Machine Data ►Type: 4-wheel forklift ►Manufacturer: Jungheinrich ►Model: EFG 550 ►Year of manufacture: 2014 Kdsdpfx Aeycb Nqjdkei ►Operating hours: 8,083 h ►Condition: Used machine, refurbished ✅Performance & Equipment ►Lifting capacity: 5,000 kg ►Lifting height: 4,500 mm ►Mast type: Duplex ►Drive: Electric, 80 V ►Battery: 930 Ah, year of manufacture 2017 ►Charger: included in scope of delivery ►Overall height: 3,040 mm ►Forks: FEM 4A ►Tyres: Superelastic ►Hydraulics: 4 functions ►Cab: Full cab with heating ►Attachment: Fork positioner with sideshift ✅Financing: Available on attractive terms. ✅Delivery & Service ►Transport with own truck possible (costs depending on distance) ►Over 100 machines immediately available (forklifts, pallet trucks, work platforms, telehandlers) ►Large rental fleet for short- & long-term rental ►Service: Repairs, maintenance & safety inspections (UVV) by our qualified and trained service technicians. ✅Your benefits at a glance ►Freshly serviced & inspected – including up-to-date UVV inspection. ►Full transparency. All documents available in paper form & digitally upon purchase. ►Start work immediately. Ready for use and available for delivery straight away. ►Multiple service technicians – we can be on site quickly. ►Direct contacts and genuine experts for your individual needs. ☎️ Contact us now. We are happy to offer personal advice. Location: Kassel – Nationwide delivery available.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 3.941 h, nosilnost: 5.000 kg, dvižna višina: 5.170 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.530 mm, Oprema: bočni pomik, kabina, osvetlitev, vlečna vilica, Viličar Jungheinrich DFG 550, letnik 2010, 3941 delovnih ur, dizelski motor, serijska številka FN410363, naprava za nastavitev vilic, bočni pomik, teleskopske vilice, nosilnost 5000 kg, razsvetljava po standardu StVZO, Blue-Dot zadaj, trojni dvižni steber (triplex), višina dviga 5170 mm, gradbena višina 2530 mm, prosti dvig 1500 mm, dolžina vilic 1200 mm – 2250 mm. Kdedpfxsyngp Hs Adksi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna širina: 635 mm, skupna višina: 145 mm, skupna dolžina: 2.080 mm, Številka artikla: 1000003710 Proizvajalec: OVERBECK Letnik izdelave: neznan Skupne mere: 2.080 x 635 x 145 mm (DxŠxV) Širina stranic: 635 mm Višina stranic: 135 mm Kdodpoqur Tysfx Adkei Dolžina transporterja: pribl. 1.800 mm Širina transporterja: 550 mm Kot ovinka (stopinj): 90° Notranji polmer ovinka: 900 mm Zunanji polmer ovinka: 1.535 mm Tip valjev: Jeklo / plastični premaz / koničen Valjev na os: 1 kos Dolžina valja: 550 mm Razmak valjev, notranji: 75 mm Razmak valjev, zunanji: 130 mm Premer valja: zunanji: 85 mm, notranji: 50 mm Pogonski način: gravitacija Stanje: Rabljeno / popolnoma delujoče Funkcijski preizkus: OK

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. Holp MultiGrip Bucket / MG.022.055 / MS01 / 550 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,400.00 net / €2,856.00 gross - Suitable for excavators up to: 2.2 tons - Own weight approx.: 80 kg - Capacity SAE: 53 liters - Cutting width: 550 mm - Maximum opening: 530 mm - The bucket is made entirely of HARDOX steel. - The MultiGrip combines the functions of a trenching bucket and a grapple in one single attachment. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grapple rotation lines are required for operation - Robust sidewall mountings - Secure grabbing and transporting - Sturdy shafts connect the two fingers (creating a 3-point grip for small items) - Significantly lighter than a grapple - Up to 30% more earth can be moved per cycle compared to a regular bucket - Reduced damage from falling material The MultiGrip is suitable for all digging and gripping tasks. It is ideal for stone relocation, earth backfilling, as well as handling wood and brush, and noticeably faster than a grapple. It can grip and sort all types of materials—even soil or grass—with ease. Thanks to its unique design, the MultiGrip bucket offers optimal penetration and handles bulky material very well. We have many other Holp products in stock and ready for immediate delivery! Feel free to contact us at / . On request, we will be happy to provide you with a financing offer. We are official Holp sales and service partner. We are official OilQuick sales and service partner. We are official Weber MT sales and service partner. We are official Magni telehandler sales and service partner. We are official DMS sales and service partner. We are official Seppi M. sales and service partner. We are official Westtech sales and service partner. We are official JCB construction machinery sales and service partner. We are official Mercedes-Benz sales and service partner. We are official Iveco sales and service partner. With over 800 used vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers. We supply you with the complete Holp range! Subject to errors and prior sale! = Further information = Kdedoyl Hdlepfx Adksi New: Yes Intended use: Construction Unladen weight: 80 kg Please contact Marius Herden for further information.

Stanje: skoraj kot novo (rabljeno), Formatna krožna žaga Format4 kappa 550 CNC Voziček 320 cm, Maks. žagin list 550 mm Nagib in dvig/spust žage motorizirano nastavljiva, Desni paralelni prislon motorizirano nastavljiv do 1599 mm, Prislon na vozičku nastavljiv motorizirano – vpišete mero in se samodejno nastavi Kodeylxbcepfx Adkedi Prislon nastavljiv pod kotom Podrezovalna enota 3-osno električno nastavljiva s parkirno funkcijo Glavni motor 7,35 kW, 3 hitrosti rezanja Rabljena naprava, stanje kot nova.

Stanje: rabljeno, dvižna višina: 36.000 mm, Leto izdelave: 2023, Pogon: kolo Serijska številka: 783802 Kdodpetr H Tvjfx Adkoi Stanje sprednjih pnevmatik: 100 Stanje zadnjih pnevmatik: 100 Transportne dimenzije (D x Š x V): 9,99x2,55x3,9 Za dodatne informacije kontaktirajte PFEIFER GROUP.

Stanje: zelo dobro (rabljeno), Formatna žaga Felder kappa 550, format 4 Voziček 320 cm, Nagib in dvig/spust žaginega lista motorizirano nastavljiva, Vodilna letev na desni strani motorizirano nastavljiva do 1600 mm, Glavni motor 7,35 kW, Kdodpfex Swzvox Adkji Maksimalni premer lista 500 mm Rabljeni stroj, v zelo dobrem stanju.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Na voljo je kontinuirana tračna peskalna naprava Rösler. Nazivna moč: 72kW, količina polnjenja abraziva: 1500kg, zmogljivost peskanja: 600kg/min, peskalna kolesa: 4, tip peskalnega kolesa: H28HM, skupne dimenzije naprave D/Š/V: pribl. 12400mm/3800mm/2300mm, maks. teža posamezne komponente: 6000kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Kdedpsyi E Epsfx Adkoi

Stanje: generalkompletno obnovljen (rabljeno), Gilotina za zamrznjene mesne bloke Ruhle S prečno rezilom in navpičnimi rezili Pogon preko motorja in reduktorja Kompaktni stroj z minimalno tlorisno površino Izpust v tote bin posodo Kedpfoyvrurex Adksdi Varnostno zaklenjeno stikalo za tote bin posodo Varnostno zaklenjeno sprednje pokrivalo V odličnem delovnem stanju

Stanje: rabljeno, Leto izdelave: 1998, Kotlovnica za sekance Mawera FU 550 RIA, moč 550 kW, letnik 1998, vključuje polž za doziranje z zaščito pred povratnim plamenom, vključno s transportnim polžem za gorivo, vključeno praznjenje bunkerja z nihajnim polžem, vključno z odstranjevanjem pepela, vključno z odprašenjem z dimnim ventilatorjem, vključno s krmiljenjem, vključno z dvigom povratka, celoten transportni sistem za gorivo / dovajanje je bil popolnoma prenovljen leta 2010. Napravo je treba demontirati lastnoročno. Napravo je mogoče v enem kosu ročno odpeljati na prosto. Kdedpfjvgcwmjx Adkei

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.835 h, nosilnost: 2.500 kg, dvižna višina: 5.500 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.450 mm, Linde H25D-02 Triplo 550 prosti dvig / bočni pomik / 4. funkcija VW Diesel 2014 Ksdpfx Adeyknkqjksdi Neprekinjena zaloga, glejte spletno stran. Cene iz Nulanda. Van de Wert Trading B.V. ima različno zalogo strojev, tovornjakov, prikolic in dodatne opreme. Vse naše dobave so po trgovinskih cenah v stanju AS-IS brez jamstev. (glejte naše splošne pogoje) Za ogled in/ali testno vožnjo se lahko dogovorite brez obveznosti. Pokličite vnaprej, saj nismo stalno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, TECHNICAL DETAILS Travel X-axis: 750 mm Travel Z-axis: 800 mm Travel Y-axis: 850 mm Magazine Capacity: 120 tools Spindle Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Kjdpfoxywtljx Adkedi Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse (X-, Y-, Z-axis): 60,000 mm/min Cutting Feed (X-, Y-, Z-axis): 0.001–30 mm/min Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Performance Data Positioning Accuracy (X-, Y-, Z-axis): ±0.003 mm Repeatability (X-, Y-, Z-axis): ±0.0015 mm Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Space Requirement: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Motor (15 min rated output): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Run Time: 12,976 h Control On Time: 112,997 h

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 13.600 h, nosilnost: 2.500 kg, dvižna višina: 5.500 mm, vrsta goriva: plin, tip droga: triplex, gradbena višina: 2.500 mm, Linde H25T-02 Triplo 550 Freelift / Stranski pomik / Nastavljive vilice LPG 2013 Stalna zaloga, glejte našo spletno stran. Cene so franko Nuland. Kodpfx Adex Hlhgekodi Van de Wert Trading B.V. ima spremenljivo zalogo strojev, tovornjakov, prikolic in dodatkov. Vse naše dobave so po trgovinskih cenah v stanju AS-IS brez jamstev. (glejte naše splošne pogoje) Za ogled in/ali testno vožnjo nas lahko neobvezujoče pokličete za termin. Prosim pokličite vnaprej, ker nismo ves čas prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: rabljeno, prevoženi kilometri: 280.425 km, moč: 177 kW (240,65 KM), prva registracija: 06/2015, vrsta goriva: dizel, lastna masa: 7.600 kg, največja dovoljena obremenitev: 4.400 kg, skupna masa: 12.000 kg, konfiguracija osi: 4x2, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, prostornina tovornega prostora: 35 m³, dolžina tovornega prostora: 6.421 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.250 mm, Oprema: ABS, dvižna zadnja plošča, hladilna enota, klimatska naprava, nadzor oprijema, računalnik na krovu, tempomat, zapora diferenciala, Renault D 240 mit Carrier Kühlung - Tiefkühlkoffer - Abmessungen (LxBxH innen): 6,40 x 2,47 x 2,25 m - Kühlaggregat: CS 550 - Stromanschluss - Motorbremse - Ladebordwand - Portaltüren - Automatikgetriebe - FRC 2027 - Tempomat - Nutzlast: 4.390 kg - Bereifung: 245/70R19,5 Sehr guter Zustand! Netto! Exportpreis! Yourtrucks Gruppe Die Yourtrucks Gruppe pflegt weltweite Geschäftsbeziehungen. Der An- und Verkauf erfolgt grenzübergreifend, daher sehen Sie in unseren Anzeigen grundsätzlich den Exportpreis – unabhängig vom Nutzungsort. Die Yourtrucks GmbH erstellt die Inhalte dieser Website mit größtmöglicher Sorgfalt und aktualisiert sie regelmäßig. Diese Informationen dienen als unverbindliche, allgemeine Hinweise und ersetzen keine individuelle Fachberatung bei der Kaufentscheidung. Maßgeblich sind ausschließlich die im Kaufvertrag vereinbarten Regelungen. Änderungen, Irrtümer, Schreibfehler und Zwischenverkauf vorbehalten. Es gelten ausschließlich unsere Allgemeinen Geschäftsbedingungen. Sprachen - We speak English - On parle francais Kjdpsxlq Slefx Adkedi - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 2.164 h, nosilnost: 4.990 kg, dvižna višina: 5.500 mm, prosto dvigovanje: 1.796 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.565 mm, širina nosilnega okvirja vilic: 1.260 mm, dolžina vilic: 1.600 mm, lastna masa: 8.109 kg, skupna dolžina: 2.812 mm, vrsta pogona: Elektro, gradbena širina: 1.450 mm, Electric 4-wheel forklift Load centre: 500 mm Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Kdjdpfx Adjxya Tnjksi Technical condition: very good Front tyre type: Non-marking Front tyre size: 355/50-15 Front tyre condition: 80 - 100% Rear tyre type: Non-marking Rear tyre size: 21x8-9 Rear tyre condition: 80 - 100% Battery voltage: 80 V Battery capacity: 930 Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2016 Battery condition: 60 - 80% Description: Safety inspection and UVV test newly performed Sideshift, 3rd valve, 4th valve, rear work light, front work light, load backrest, full free lift, safety light, safety pilot, non-marking tyres, interior mirror, joystick, single pedal operation, 1-pedal control, joystick (Solo-Pilot), comfort seat, hydraulic steering, panoramic rear-view mirror, multi-color display, beacon, FloorSport rear and front, rear warning signal