Masterwood Project 415 nakup rabljenega (34)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 12.666 h, moč: 12 kW (16,32 KM), MACHINING CAPACITIES: - X (U) axis vertical milling travel: 3875mm, between stops 3170mm - Y (V) axis milling travel: 1390mm between stops, for drilling: 1201mm - Z (W) axis milling travel: 290mm Maximum workpiece height (thickness), usable stroke: 110mm Additional information: see stroke diagram per aggregate - Maximum traverse speeds: X (U) axis: 60 m/min Y (V) axis: 50 m/min Z (W) axis: 20 m/min MACHINE CONFIGURATION: - Work table with 6 mobile support beams, equipped with some vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity 44 to 78mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table split into 2 working zones - Becker VTLF 250 m³/h 5.5 kW vacuum pump with air filter - Pfannenberg 1.7 kW cooling unit - Chip conveyor belt - X axis movement by rack and pinion, Y & Z axes by ball screw and nut (high-precision linear guides with automatic lubrication) - Aggregates on swan neck composed as follows: • 12 kW HSD milling/routing unit - Tool holder type: HSK 63 F - Variable speed 6000 - 24000 rpm Dcjdpfx Asy Nb Tkopljg Controlled by frequency inverter - Perimeter extraction hood - Onboard tool magazine: 10 positions + additional 12-position magazine • 11-spindle 1.7 kW drilling unit - Spindle pitch: 32mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles in X - 1+1 horizontal spindles in Y • Operator console - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual DXF conversion and direct execution of ISO, TLF, DXF Pre-programmable zones Remote control included OTHER CHARACTERISTICS: - Total electrical supply: 400V, 3Phases+N+PE, 50Hz Rated current 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average air consumption: 100Nl/min - Extraction: Lower port Ø120mm, upper port Ø250mm Recommended airflow 6500 m³/h, speed 20 m/s - CE marking compliant, safety zones and protective grid Lockable disconnect switch, emergency stops Operating footprint: see diagram Transport footprint: to be specified during preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Original documents, manual, spare parts list, electrical and pneumatic diagrams, service keys, programs, and license keys included.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, vhodni tok: 55 A, skupna masa: 3.100 kg, dolžina mize: 4.000 mm, širina mize: 1.390 mm, zračni tlak: 7 letvica, moč vretenovega motorja: 9.000 W, delovna višina: 110 mm, Stroj je rabljen. V dobrem delujočem stanju. Podrobnosti o artiklu: Proizvajalec: MASTERWOOD Model: PROJECT 415 L Dcodpjyft A Iofx Aplsg Kategorija: CNC obdelovalni center Leto izdelave: 2006 Razpoložljivost: kratkoročna Status delovanja: demontiran / skladiščen Tehnične specifikacije: Delovna dimenzija X: 4.000 mm Delovna dimenzija Y: 1.390 mm Delovna dimenzija Z: 110 mm Število rezkalnih vreten: 1 Glavna motorna moč: 9 kW Maksimalno število vrtljajev: 24.000 min⁻¹ Sistem za vpenjanje orodja: HSK-F63 Število postaj za menjavo orodij: 10 Navpična vrtalna vretena: 10 Vodoravna vrtalna vretena v osi X: 4 Vodoravna vrtalna vretena v osi Y: 2 Utornik v X-smeri Konzolni stroj Mizna izvedba: pod in rail miza Število konzol: 8 Krmiljenje: MASTERWOOD CN PC Programska oprema: MASTERWORK MW310, MASTERWORK Označevanje skladnosti: CE oznaka Teža: 3.100 kg Cena: 12.000 EUR + DDV

Stanje: rabljeno, številka stroja/vozila: 008362, Delovno območje os X: 3200 mm Delovno območje os Y: 1600 mm Delovna površina: z vakuumskimi konzolnimi podlagami Moč glavnega vretena: 12 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 32 Število mest za orodja: 22 Dodpfxjx A Tl Ae Aplocg

Stanje: novo, Maximum workpiece length: 5150 mm Milling spindle: 1 unit Main motor: 16 kW Control system: Beckhoff CNC Number of axes: 5 units Dcodpfsd Ih Htjx Apleg CNC machining center Masterwood Project 385 WL, BRAND NEW MACHINE The all-rounder for: - Windows, curved and arched windows, and doors - Interior fittings - Curtain wall (post-and-beam) systems - 5-axis machining of all kinds Detailed description available in the attached PDF file. HIGHLIGHTS: - Working area: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 high-performance 5-axis spindle, 16 kW, double bearing support, with HSK 63 F interface - Fixed drilling head with 19 spindles: * 7 individually selectable vertical drilling spindles, X-direction * 6 individually selectable vertical drilling spindles, Y-direction * 2 double horizontal drilling spindles, X-direction * 1 double horizontal drilling spindle, Y-direction * Saw unit integrated in the drilling head - Carousel tool changer with 22 positions, 102 mm pitch - Carousel tool changer with 16 positions, 102 mm pitch - Linear 4-position tool magazine - Special clamps for straight window and door parts - Special clamps for round window and door elements - 24 vacuum clamps for interior finishing - Vacuum pump - Chip conveyor - Comprehensive construction software for interior finishing, panel processing, and window & door production: * Masterwork: 2D WOP for standard panel processing/interior finishing applications, with additional Lamello joint feature * Master 3D, Level 2: for more complex operations, optionally expandable for fully interpolating 5-axis operation * MasterWindow: Integrated window and door design software (machine can be used with or without external industry software) VIDEO demonstrates production of 4 sash components in a single setup, with complete machining including glazing bead production. Hybrid corner joint. Of course, all common corner joints can be produced on the machine. ADDITIONAL OPTIONS AVAILABLE ON REQUEST! We are also happy to offer suitable tooling for the machine. (Data according to manufacturer - subject to change and without liability!)

Stanje: novo, Maximum workpiece length: 3200 or 5100 mm Milling spindle: 1 unit Main motor: 12 kW Control: Beckhoff CNC Number of axes: 5 units Masterwood Project 385 CNC machining center Dedped N Rt Tofx Aplscg 5-axis CNC machining center in gantry design, suitable for: Arched windows, doors, mullion and transom constructions, interior fittings, staircases Brief summary: ----- Working area: X = 3200 mm (optional 5100 mm); Y = 1500 mm; Z = 200 mm 1 x high-performance 5-axis spindle, 12 kW, with HSK 63 F interface 1 x fixed-installed drilling head with 19 spindles: • 7 individually selectable vertical drilling spindles in X-direction • 6 individually selectable vertical drilling spindles in Y-direction • 2 double horizontal drilling spindles in X-direction • 1 double horizontal drilling spindle in Y-direction Saw aggregate integrated in drill head 27 tool changer positions: • Carousel tool changer with 22 positions, 102 mm pitch • Linear tool magazine with 5 positions for large tool diameters Console table with 6 traverse beams Workpiece lifting device 6 special clamps for round window and door components 24 vacuum clamps for panels and interior fittings 1 vacuum pump, 100 m³/h 1 chip conveyor 1 remote control Construction software Masterwork: • 2D-WOP for standard panel machining / interior fittings, arched windows, doors Master 3D Level 2: • For more complex machining operations • Optionally upgradable for fully interpolating 5-axis machining Freight and installation within Germany Technology and services as per attached detailed description ----- Total price in this configuration: on request! ----- Optional extras with additional charges: ----- Working length 5,100 mm instead of 3,200 mm Including increased number of consoles and clamping elements Surcharge: €7,500.00 plus VAT Additional carousel tool changer with 16 positions, 102 mm pitch Surcharge: €6,500.00 plus VAT See attached PDF for detailed description. More options available on request! (Technical details according to manufacturer – without guarantee!)

Stanje: dober (rabljeno), Koda: 0190 Znamka: MASTERWOOD Model: PROJECT TF 100 - CE standard CNC stroj za vrtanje po točkah v pretočnem načinu, primeren za obdelavo plošč, pohištva, pohištva po meri, kuhinj, kopalniškega pohištva, mizarske delavnice in druge aplikacije – CE standard. Lastnosti: Robustna vpenjalna naprava za premikanje plošč, ki drsi po linearnem vodilu s prednapetimi krogličnimi ležaji ter se pomika prek krogličnega vretena za visoko natančnost in togost. Opremljeno z brezkrtačnim motorjem. Delovna miza: miza z prostovrtečimi gumiranimi valji za gladek sprejem in izmet plošč. Premikanje plošč po zračni blazini za preprečitev praskanja občutljivih površin. Potiskalo plošč za gladko in natančno premikanje. Dolgitudinalni potopni referenčni prislon. Avtomatsko odčitavanje dolžine plošče. Obdelovalna enota: vrtalna glava z navpičnimi in vodoravnimi vreteni ter enoto za utore (žaganje). Centralni priključek za odsesavanje odrezkov. Numerični krmilnik s PC-jem: Windows operacijski sistem – mrežna povezava. MASTERWORK programska oprema: Masterwood sistem za avtomatsko risanje in programiranje – vrtanje in optimizirano programiranje vrtalnega cikla. Tehnični podatki: Osi X-Y-Z pomik v mm: 1670-1330-87 Maks. hitrost pomika osi X-Y-Z v m/min: 25-50-25 Dodpfx Apow Emgbelocg Delovno območje: širina min/max mm 80/1000 – dolžina min mm 250 – dolžina max neomejena – debelina min/max mm 10/60 Vrtalna glava: število 5 neodvisnih navpičnih vreten po osi X, 5 neodvisnih navpičnih vreten po osi Y; 2 dvojni vodoravni vreteni po osi X, 1 dvojno vodoravno vreteno po osi Y Razmak med vreteni: 32 mm Moč motorja: 1,7 kW Hitrost vrtenja vreten: 4000 obr/min Enota za žaganje – moč motorja: 1,7 kW – premer žaginega lista: 125 mm – 4000 obr/min Delovni zračni tlak: 7/8 bar Mere (d/š/v): 2400 x 1990 x 1600 mm Teža: 1300 kg

Stanje: rabljeno, Leto izdelave: 2013, Construction de machines : Traverse Dimension d’usinage en X : 1000 mm Dimension d’usinage en Y : illimitée mm Djdpjx Urniefx Apljcg Épaisseur d’usinage (dimension Z) : 60 mm Nombre de broches principales : 1 pc Puissance de la broche principale : 3,3 kW Changeur d’outils : Pas de changeur d’outils Unité rainure arrière : fixe en direction Y Broches de perçage verticales - en direction X : 5 pcs Broches de perçage verticales - en direction Y : 5 pcs Vitesse de rotation broche de perçage verticale : 4000 tr/min Broche de perçage horizontale en X : 2 broches doubles Broche de perçage horizontale en Y : 1 broche double Vitesse de rotation broche de perçage horizontale : 4000 tr/min Taille de l’écran : 17" Type de commande : Commande PC Système d’exploitation : Windows XP Clavier à touches : Oui Souris : Oui Système de programmation : Masterwork DXF Interface : Oui Connexion en ligne possible : Oui Lecteur CD-ROM : Oui Version table : Table fixe avec rouleaux Poids env. : 1 300 kg Dimensions : 2 200 x 2 470 x 1 590 mm Lieu de stockage : Client

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 07120012, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.500 kg, TECHNICAL DETAILS Dcedpfxswvtmpj Apleg CE marking: Yes MACHINE DETAILS Model: Project 320 Power output: 33 kVA Current: 50 A Voltage: 400 V Frequency: 50 Hz Weight: 2,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Masterwood Projekt 415L 3-osni stroj z ISO30 Vodoravni rezkar za vrata Dedpfxjy Ilh No Aplecg Držala za orodje Vrtalna glava Menjalec orodij 8 nosilcev brez cevi Vakuumska črpalka 100 m3 Masterwork CAD-CAM Delovno območje 5100 x 1335 mm Stroj popolnoma delujoč Stroj popolnoma pregledan Stroj je trenutno nameščen v razstavnem prostoru in je takoj na voljo Spredaj varnostna fotocelica (brez preprog)

Stanje: novo, Maximum workpiece length: 3,200 / 5,100 mm Milling spindle: 1 unit Main motor: 12 kW Control: Beckhoff CNC Number of axes: 5 Masterwood Project 385 CNC Machining Centre ----- 5-axis CNC machining centre in gantry design for use in interior fittings, window, and door production Short summary: ----- Working area: X = 3,200 mm (Optionally 5,100 mm); Y = 1,500 mm; Z = 200 mm 1 x 5-axis high-performance spindle, 12 kW, with HSK 63 F interface 1 x fixed drilling head with 19 spindles: - 7 individually selectable vertical drilling spindles in X direction - 6 individually selectable vertical drilling spindles in Y direction - 2 double horizontal drilling spindles in X direction - 1 double horizontal drilling spindle in Y direction Saw unit integrated in drilling head 27 tool change positions: - Carousel tool changer with 22 positions and 102 mm pitch - Linear 5-position tool magazine for large tool diameters Console table with 6 cross supports Dcjdod Rhd Ropfx Aplog 6 workpiece lifting devices in "window version" with 3 controlled heights Veneer stops 6 special clamps for straight window and door elements 1 special clamp for small parts 18 vacuum clamps for panels and interior fittings 1 vacuum pump, 100 m³/h 1 remote control Design software Masterwork: - 2D-Wop for standard panel machining/interior fitting, doors Master 3D Level 2: - For more complex machining, - optionally expandable for fully interpolating 5-axis processing Freight and installation within Germany Technology and services as per attached detailed description ----- Total price in this configuration: on request! ----- Options such as increased working length, special clamps for arched windows, additional tool changers, or window-specific software available on request! Detailed description see attached PDF. (Technical data as per manufacturer – subject to change without notice!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This 3-axis MASTERWOOD OM B1 CN3KF was manufactured in 2010. It is equipped with a Bedano head and a horizontal milling motor, making it ideal for producing slots for shutters or blinds. The working length is 2600 mm. The machine is in very good condition and includes a PC with integrated software running on Windows XP. Take advantage of this opportunity to purchase a MASTERWOOD OM B1 CN3KF CNC woodworking center. Contact us for further information. Machine Advantages Technical Features • Working length: 2600 mm • The machine is equipped with a Bedano head and a horizontal milling motor for producing slots for shutters or blinds. • The software is integrated into the included PC and can create both Bedano slots and shutter slots. Dsdpsy Nkn Dofx Apljcg • Included PC with Windows XP operating system. • Very good condition, with low operating hours. Additional Information Machine still powered and can be inspected under power.

Stanje: dober (rabljeno), Koda: 0187 Znamka: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA 3-skupinska večvretenska vrtalna strojka za mizarstvo, pohištveno industrijo, izdelavo pohištva po meri, obdelavo plošč in druge raznolike aplikacije. Tehnični podatki: - 1 horizontalna vrtalna enota z 21 vreteni - 1 vertikalna vrtalna enota z 2 prečnima glavama, vsaka z 21 nastavljivimi vreteni, ki jih je mogoče postaviti tudi v vzdolžni osi - Jeklena vodila z milimetrsko in 32-razdelčno lestvico za pozicioniranje omejevalnikov in pnevmatskih pritiskačev Dedpfx Ajw D E Unjplocg - Razmak med osmi vreten: 32 mm - Navojni priključek za svedre - 2 pnevmatska pritiskača za fiksiranje plošče, nastavljiva po položaju - Največja debelina plošče: 90 mm - Globina horizontalnega vrtanja: 85 mm - Moč motorja: 2,5 KM - Obratovalni tlak: 6-8 atm - Skupne mere (DxŠxV): 1850 x 1200 x 1600 mm - Teža: 630 kg

Stanje: dober (rabljeno), Kód: 0359 Značka: MASTERWOOD Model: TEKNOMAT 2000-P - CE standard Elektronický stroj na vkládání anub s 2 řízenými osami pro vkládání anubových pantů – CE standard Djdpfx Apoy Eg T Ujlecg Technické specifikace: Délka pracovního zdvihu: 3100 mm – posuvová rychlost: 72 m/min Výška pracovního zdvihu: 350 mm – posuvová rychlost: 15 m/min Hloubka pracovního zdvihu: 150 mm – posuvová rychlost: 15 m/min Pracovní stůl: 150 x 3800 mm 2 zadní dorazy s ručním nastavením 4 zadní upínky typu konzola s referenčními dorazy Boční dorazy s ručním nastavením: 1 vpravo, 1 vlevo 2 pneumatické přední upínky Anubová jednotka s dvojitým zásobníkem pro samčí i samičí anubové panty – průměr 14 mm Výkyvná hlava – 7 + 90° Zařízení pro zašroubování anubových šroubů se dvěma dříky Přední pravítka na pracovním stole pro obrábění smontovaných dveří a oken Řízení CNC 2: Mikroprocesorová řídicí jednotka – digitální displej – multitaskingový operační systém – programování ručního a automatického vkládání anubů – vkládání jednotlivých anubů – provádění krok za krokem Instalovaný elektrický příkon: 7,62 kW Stlačený vzduch: 6–7 atm Celkové rozměry stroje: 4400 x 1600 x 1600 mm (V) Hmotnost: 1650 kg Celkové rozměry elektrického rozvaděče: 1050 x 550 x 1100 mm (V) Hmotnost: 390 kg

Stanje: novo, Edge thickness: from 0.4 - 3 mm Workpiece thickness: from 9 - 60 mm Feed speed, stepless: 8 - 12 m/min Total connected load: 15 kW Dimensions (LxWxH): 4,290 x 840 x 1,690 mm Masterwood Edge Banding Machine ME 309 "Partnership Edition" ----- The Masterwood edge banding machine type ME-309 is a pneumatically controlled machine, equipped with all units required for a perfect finish. It is also suitable for processing PUR adhesives. Units: - Jointing cutter unit - Saw trimming unit - Universal milling unit - Corner rounding unit - Flat scraper - Radius scraper - Buffing unit Equipment features: - Separator agent spraying system - Pre-heating lamp - Gluepot with pre-melting unit - End trimming unit Dcedpfx Aoy Ay Akspljg - Cleaning spray device Technical data: Machine size: 4,290 x 840 x 1,690 mm (LxWxH) Feed speed: stepless from 8 to 12 m/min Min. panel size: 90 x 120 mm (with panel thickness 9-30 mm) Min. panel size: 90 x 200 mm (with panel thickness 30-60 mm) Min./max. panel thickness: 9 - 60 mm Min./max. edge thickness: 0.4 - 3 mm Total connected load: 15 kW ----- Price for the above-mentioned machine upon request! Plus packing and shipping costs ----- Freight costs for ME-309 - EUR 2,950.00 Complete, incl. delivery and installation Including intensive training of operating personnel. Unloading and cross-transport to installation site to be arranged by the customer. ----- (Technical information as provided by the manufacturer - subject to change and without guarantee) All prices quoted are net, plus VAT as applicable.

Leto izdelave: 2019, obratovalne ure: 1.200 h, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.100 mm, pomik osi Y: 2.150 mm, pomik po osi Z: 100 mm, število mest v zalogovniku orodij: 12, število osi: 4, Ta 4-osna lesna vrtalna stroj MASTERWOOD Ks 21.31 je bila izdelana leta 2019. Ponaša se z impresivno XYZ delovno zmogljivostjo 3100 x 2150 x 100 mm in zmagovalnikom orodij z največjo kapaciteto 12 orodij. Stroj je opremljen z avtomatskim sistemom za nalaganje in razkladanje s priseski ter ima 360-stopinjsko vrtljivo os. Če iščete visokokakovostno vrtalno stroj, priporočamo, da razmislite o modelu MASTERWOOD Ks 21.31, ki je na voljo za prodajo. Kontaktirajte nas za več podrobnosti. • V uporabi od leta 2020 • Stanje: odlično • Delovnih ur: 1200 • Vrtalna enota • 360° vrtljiva os • 4 vakuumske cone Dodatna oprema Dodpfey Exizox Apljcg • Avtomatski sistem za nalaganje in razkladanje s priseski • Miza za nalaganje in razkladanje

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Večvretenka Masterwood K29S Djdpoy Atycofx Aplscg Število vreten: 29 Št. obratov: 2800 obr./min Razdalja med prvo in zadnjo svedrom: 896 mm Število pnevmatskih pritiskalcev: 4 Razdalja med središči posameznih vretin: 32 mm Maks. globina vrtanja: 80 mm Delovni tlak: 6 – 7 bar Moč motorja: 3 kW Tehnična dokumentacija

Stanje: zelo dobro (rabljeno), Machining Center MASTERWOOD TF 100 2.0 – used – Through-feed machining, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X direction, Pick-up tool changer, Automatic central lubrication, Panel measurement sensor, New drill set, Dcedpfey Eylwjx Aplog New grooving saw blade, Clamex optional, Door processing optional ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles (X direction): 2 pcs, Number of horizontal double drilling spindles (Y direction): 1 pc, Saw blade Ø (saw unit): 120 mm, Number of tools in changer: 6 pcs, Extraction connection Ø: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Info: - Completely cleaned - Electrical system checked - Pneumatics checked - Set according to manufacturer specifications - Immediately ready for use

Stanje: novo, Leto izdelave: 2026, max. workpiece length 4400 mm milling spindle: 1 unit main motor: 19.2 kW control: Beckhoff CNC machining centre MASTERWOOD 4 WIN ---- Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimum tool configuration - Simultaneous loading with 4 workpieces - Patented clamping system for optimal workpiece machining - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window construction software, i.e. the machine does not need to (but can, of course) be controlled externally from the office by sector-specific software - Powerful 19.2 kW main motor with HSK-63 E Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Tooling available for prompt delivery upon request! Request a quotation and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! Dsdpfx Apjyyqm Usljcg You will also find the technical description of the machine as a PDF document attached. We would be happy to take your used machine in trade at a fair price! Matching stationary or mobile extraction units available on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (Technical specifications as per manufacturer – subject to change!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 503 h, vhodna napetost: 400 V, proizvajalec krmilnikov: Masterwood, Oprema: CE označba, Masterwood 12.25 nesting stroj Delovno območje: 2500 x 1250 x 140 mm 16,5 KM rezkar HSK 63-F Menjalec orodij za 10 pozicij HSK 63-F Dedpfxsyxmvpe Aplecg Vertikalna vrtalna glava s 5 pozicijami Vakuumska črpalka 250 m3 KOT NOV, SAMO 503 DELOVNE URE

Stanje: dober (rabljeno), Leto izdelave: 2013, Pomiki (X,Y,Z): neomejeno x 1000 x 60 mm Število vreten navpične vrtalne glave: 10 kos Število vreten vodoravne vrtalne glave: 6 kos Premer izvlečne šobe: 150 mm Število rezkalnih enot: 1 kos Vrtalna zmogljivost: 1,7 mm Število vrtljajev vrtalne vretena: 4000 min⁻¹ Priključek za stisnjen zrak: 8 bar Teža: 1300 kg Dimenzije (dolžina/širina/višina): 1990 x 2410 x 1510 mm - Dolžina obdelovanca: neomejena - Širina obdelovanca: 80 - 1000 mm - Debelina obdelovanca: 10 - 60 mm - Hitrost pomika: 0 - 20 m/min - Utorna žaga v X smeri Dsdpfxsyxhh Tj Aplocg - Rezkalno vreteno 3,3 kW, 1000 - 18000 min⁻¹ - Valjčna miza na vhodu in izhodu - Senzor za merjenje plošč - Centralno mazanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vhodna napetost: 400 V, vhodni tok: 39 A, vhodna frekvenca: 50 Hz, skupna masa: 40.000 kg, Ponujamo to rabljeno obdelovalno središče Masterwood TF 600S s prehodom, letnik 2020. Tip: TF 600S Serijska številka: AABB0130 Letnik: 2020 resnično 6-stransko obdelovanje 2 avtomatska neodvisno upravljana vpenjalna klešča horizontalna obdelava tudi s strani klešč 3 neodvisne vrtalne glave s skupno 47 vrtalnimi vreteni enota za utorno žago rezkalno vreteno zgoraj in spodaj Dcsdpfoy Dgqkex Apljg mizna plošča z zračnim blazinjenjem na vstopu in v delovnem območju povratek plošč na izhodu čitalnik črtnih kod Stanje: zelo dobro Lokacija: 63-025 Pieczkowo/Poljska Smo mizarstvo s podružnico na Poljskem, nismo trgovec Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, maks. dolžina obdelovanca: neomejena maks. širina obdelovanca: 990 mm Debelina plošče: 10 - 60 mm Vrtalna glava: 20 vreten (12 vertikalnih + 8 horizontalnih) Rezkalna enota: 6-stopenjski menjalec Menjalec orodij: 6-stopenjski menjalec orodij Dedoyl Tibopfx Aplecg Agregati: 16-vretena vrtalna glava Dimenzije (DxŠxV): 2200 mm x 1600 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 23 spindles left/right spindles 3 pneumatic clamps spindle pitch 32mm Dcjdpfx Asyxc E Tsplsg foot pedal control CE marking 380V power supply

Stanje: dober (rabljeno), Koda: 0305 Znamka: MUTI MASTERWOOD Model: OM B1 Hidravlični enoglavni dletni stroj za natančno izdelavo utorov za lesena okna Tehnični podatki: Močna litoželezna konstrukcija Dcjdpfeyl Uwmjx Aplog Hidravlični premiki Hidravlične vpenjalne preše Sistem čiščenja hoda in hlajenja orodja z zračnim curkom Glavni motor 3 Hp Motor črpalke krmilne enote 1 Hp Največji hod glave 150 mm Največja globina utora 130 mm Vertikalna nastavitev glave 100 mm Longitudinalni hod mize 400 mm Dimenzije mize 1000 x 310 mm Višina delovne površine 860 mm Teža 700 kg

Stanje: novo, Pre-scoring unit, kW Dimensions (Length/Width/Height), mm Approx. machine weight, kg Masterwood MasterSaw Heavy-duty pressure beam saw with full equipment ----- Manufacturer description: ----- The MasterSaw pressure beam saws offer the following features: - Air-jet marked cutting line - Height-controlled pressure beam - Adjustable saw blade protrusion - 3 or 4 air cushion tables, center tables adjustable - Infeed and outfeed rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for saw blade replacement - Saw carriage return travel speed 110 m/min, feed up to max. 95 m/min - Gripper carriage return speed up to 95 m/min - Machine weight 6 t or 6.8 t - 8 or 10 twin-finger clamps as standard - Double roller side alignment - Intuitive machine software with graphical user interface - Tension-free cutting - Recut/nesting option - Front and rear cleaning flaps ----- Features of the MasterSaw series: MasterSaw 320 – Outstanding in price and performance ----- - Cutting length 3,200 mm - 3 air cushion tables, center table adjustable - Machine weight 6 t MasterSaw 430 – Industrial standard for the trade ----- - Cutting length 4,300 mm - 4 air cushion tables, center tables adjustable - Machine weight 6.8 t Detailed features MasterSaw 320/430: ----- - Saw unit with automatic adjustment of optimum saw blade protrusion - Scoring saw unit with 200 mm saw blade for splinter-free cuts at high feed rates - Saw unit drive via servomotor and rack and pinion - Pneumatic pressure beam is always positioned parallel to the worktable via rack and pinion - The opening height of the pressure beam is monitored by the intelligent control system to ensure the shortest cutting cycles - Double roller side aligner positions workpieces before and after the cutting line - Material pusher with 8 (MS 320) or 10 (MS 430) twin-finger clamps Technical specifications MasterSaw 320/430: ----- - Max. panel size MS 320: 3,200 x 3,100 mm - Max. panel size MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thickness up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW Dcsdpjxmk Ebsfx Aplsg - Feed speeds: up to 95 m/min in sawing mode – up to 110 m/min in return - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE protective equipment ----- Features of the MasterSaw series: MasterSaw 430 L – Lift table machine with 120 mm cutting height ----- The solution for high productivity The MasterSaw 430 L is equipped with rear-side lift table loading. Thanks to its 120 mm cutting height, it is also ideal for series production. Equipment and technical data MasterSa...