Martina Peči Vroč Zrak nakup rabljenega (23.866)

Leto izdelave: 2006, Stanje: dober (rabljeno), Kapazität: 4 Einschübe, 432 × 343 mm – ideal für die Zubereitung verschiedenster Backwaren, vorgegarter Speisen sowie Fisch-, Fleisch- und Gemüseprodukte. Abmessungen: Länge 600 mm, Tiefe 595 mm, Höhe 560 mm. Gehäuse komplett aus Edelstahl, mechanisches Steuerungssystem. Fpsdodtkkmopfx Aflob Details Gärschrank: 8 Einschübe, 220/230 V Spannung, Leistungsaufnahme 1,5 kW. Abmessungen: Länge 600 mm, Tiefe 630 mm, Höhe 915 mm, Gewicht: 38 kg.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 1.000 m³/h, skupna širina: 1.020 mm, skupna dolžina: 1.680 mm, skupna višina: 2.460 mm, skupna masa: 1.540 kg, obratovalni tlak: 10 letvica, vhodna napetost: 400 V, moč: 14,2 kW (19,31 KM), One (1) heat-regenerating compressed air adsorption dryer. The dryer was in operation from 2014 to 2017. The unit has been out of service since 2017. The compressed air was supplied by an oil-free Atlas Copco ZR3 compressor with 132 kW power. Manufacturer: Donaldson Filtration Deutschland GmbH Model: HRS 1000 Year of manufacture: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions (L x W x H): 1680 mm / 1020 mm / 2460 mm Weight: 1540 kg Fjdpfxsr A El Es Aflepb Desiccant bottom (20 cm): 3 mm activated alumina Desiccant middle (40 cm): 2 mm activated alumina Desiccant top (remaining to the top): silica gel beads The dryer has already been dismantled and is available immediately. The desiccant was vacuumed from the vessel and sorted by type in airtight bags. The desiccant is still in a usable condition; it is not oiled or contaminated. External re-drying of the desiccant is possible. TÜV has inspected the vessels internally and an expert opinion is currently being prepared. “Loose deposits at the lower part of the dished head” (photos to follow).

Stanje: rabljeno, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element no.: CE 0087B Fsdpfxohalvdj Aflopb - Filter housing made of aluminium Weight: 5 kg Dimensions (L x W x H): 125 x 110 x 420 mm Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, moč: 45 kW (61,18 KM), kapaciteta rezervoarja za gorivo: 2.000 l, obratovalni tlak: 10 letvica, vrsta hlajenja: zrak, Complete compressed air system consisting of: Atlas Copco Compressor GA15VSD+ Year 2016, approx. 13,000 operating hours – 15 KW – Max 13 BAR Atlas Copco Refrigeration Dryer FX8 Year 2020 MaBe 500L Tank Year 2011, approx. height 2.15 m Almig AKC300 Activated Carbon Adsorber incl. condensate drain valve, SPX Flow Technology EDDSU2 System is fully functional and has been regularly serviced. Already dismantled and packed on a pallet. Very good condition, see pictures. Fpsdpfx Afswz Ul Doleb Forklift available for loading on site. Collection only by appointment in 75053 Gondelsheim. Shipping by forwarding agent possible, please inquire with postal code.

Stanje: rabljeno, Leto izdelave: 2003, Compressed Air Tank made of Steel (galvanized) Technical Specifications / Data: Available Quantity: 1 Volume: 5,000 liters Tank Type: Pressure vessel External Diameter: 1,400 mm Cylindrical Height: 2,870 mm Overall Height: 3,710 mm Operating Pressure Type: Overpressure Operating Pressure: 11 bar Operating Temperature: -10 / +50 °C Features: Top Head: 2 x Lifting lugs 1 x Vent Fedpfx Aev Hmd Doflspb Shell: 1 x Manhole 2 x 2" sockets 1 x 1 1/2" socket 2 x DN 80 flange nozzles Bottom Head: 3 x Pipe feet 1 x 3/4" socket at the outlet For further equipment see photos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Sušilnik PARKER HIROSS K45/16D2-G230MT Kapaciteta: 7000 l/min Leto proizvodnje: 2016 Fpjdpfxsw Nh A Ds Aflsb Sušilnik je popolnoma delujoč; zagotavljamo servis. neto cena: 5200 PLN bruto cena: 6396 PLN

Stanje: dober (rabljeno), Leistung: 7,5 kW. Strom: 400 V. Abmessungen (LxBxH): 95 x 75 x 115 cm. Volumen: 1,2 m³. Gewicht: 185 kg. Mit Untergestell. Fpsdodtkigepfx Aflsb

Leto izdelave: 1980, Stanje: pripravljen za uporabo (rabljen), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of manufacture: 1980, operating pressure: 7 bar, test pressure: 9.1 bar, operating temperature: 20°C, medium: compressed air, capacity: 5,300 liters. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15,000 liters, operating pressure: 4 ATÜ, test pressure: 5.2 ATÜ. An on-site inspection is possible. Fedeumwg Espfx Aflopb

Stanje: rabljeno, Filtration System – Extraction Unit, Central Extraction System Cartridge – Pulse Filter VALCO Type Pidclean 4N Central Welding Fume Extraction Serial No.: 15003 Year of manufacture: 2003 Max. Airflow: 3,500 m³/h Filter Surface Area: 92.8 m² Differential Pressure: 700 Pa Extraction Connection at Filter Inlet: Ø 250 mm Exhaust Air Connection at Filter Outlet: 225 x 160 mm Compressed Air Requirement: 4 to 6 bar Motor Power: 5.5 kW Power Supply: 400 V, 50 Hz - Filter control unit AUTEL, Type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Service hatch for filter replacement - Radial fan mounted on top of the unit Fedpfxemquwqo Aflspb - Mobile dust collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical schematic and operating instructions for the control system included Required space (L x W x H): 2,150 x 1,350 x 2,560 mm Weight approx. 550 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 2019, Nicotra Gebhardt P2M Process Air Fan Casing fan with direct drive, without coupling – single-sided intake Robust industrial design Durable, easy to maintain High efficiency, quiet operation Custom solutions at series production prices Certified and assured quality according to ISO 9001 Technical data measured according to DIN 24163 Accuracy class 2 according to DIN 24166 Scroll housing Heavy-duty welded construction Housing positions adjustable in 90° increments Custom installation positions Radial impeller Impeller diameter: 500 mm Backward-curved blades Welded design Dust repellent Materials: coated steel, hot-dip galvanized steel, stainless steel 1.4307 ATEX: Category 2 and 3; gas and dust Manufacturer: Nicotra Gebhardt Airflow: 8,000 m³/h dPt: 1,070 Pa Density: 1.2 kg/m³ Tmax: 80°C n: 1,460 rpm Fpjdpfx Afoxl Sr Tjleb n max: 2,511 rpm PW: 3.10 kW Ins/Eff= B/total N (13/15): 61/64 ETA opt: 71.8 N ist: 76.4 Motor power: 4 kW Directly flange-mounted drive motor Power supply: 400 Volt 50 Hz Weight: 195 kg Year of manufacture: 2019 Find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Compressed Air Tank 20,000 Liters Manufacturer: OKS Fpedpswrn N Rsfx Afleb Capacity: 20,000 liters Operating Overpressure: +11 bar Test Pressure: +14.3 bar Operating Temperature: +50°C Dimensions: Total Height: 7,010 mm Cylindrical Height: 5,710 mm Diameter: 2,000 mm In the Cylinder: 1 x Manhole (320 x 420 mm) 3 x Female Threaded Sockets 1" 1 x Flanged Nozzle DN100 PN16 DIN 2633 In the Top Head: 1 x Female Threaded Socket 1" 2 x Lifting Lugs In the Bottom Head: 1 x Female Threaded Socket 1" 4 x Pipe Supports Includes complete technical pressure vessel documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Sušilnik KAESER DC169E Kapaciteta: 16,88 m3/min Leto izdelave: 2018 Sušilnik je popolnoma delujoč; nudimo servis. Neto cena: 8.200 PLN Fsdpfx Afsw Nh Akslepb Bruto cena: 10.086 PLN

Leto izdelave: 2006, Stanje: dober (rabljeno), Descriere Marcă: Fimar Model: FME 4+4 ID: 0069 Stare: Activ Preț: 800 € + TVA Locație: Oradea (RO) Cuptor electric profesional pentru pizza, pâine – fațadă rustică – suprafață de coacere din material refractar – izolație termică cu vată minerală bazaltică – uși cu geam de inspecție din sticlă Pirex – pirometre – iluminare interioară – 2 termostate pe cameră. PUTERE: 8,4 kW ALIMENTARE: 230V/1N/50-60Hz – 230-400V/3-3N/50-60Hz CURENT: 40A – 15A (230V/1N) (400V/3N) TEMPERATURĂ DE LUCRU: 50 ÷ 500 °C DIMENSIUNI CAMERĂ DE COACERE: 610x610x140h (mm) x2 DIMENSIUNI: 900x735x750h (mm) GREUTATE NETĂ: 114 Kg Fpeded Hzayepfx Afljb GREUTATE BRUTĂ: 139 Kg ExWorks. Preț negociabil. Inspecția tehnică poate fi organizată cu cel puțin 24 de ore înainte. Vorbiți cu noi în limba engleză, germană, spaniolă sau maghiară. Ne rezervăm dreptul la erori, modificări și vânzare prealabilă.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Connected load 4 kW 1 pc. control cabinet Pipe connection 350 mm Length 2000 mm, width 700 mm, height 1950 mm Lateral impact plates 1 pc. extraction pipe D= 350 mm, 3900 mm long 1 pc. 90° bend 350 mm 1 pc. 45° bend 350 mm Deflector hood 350 mm Wiring diagram, operating manual Fpjdpfsiau Tzjx Aflsb Recirculation system Max. air flow rate 6500 m³/h Motor power 2 kW With heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. recirculation duct 2000x950x400 mm 1 pc. recirculation duct 950x950x400 mm External wall connection 700x700 mm Bird guard 660x590 mm Heat exchanger outlet 400x400 mm Unfortunately, we cannot respond to inquiries without complete contact information.

Stanje: rabljeno, Piston Compressor KAESER Type EPC 630-250 Serial No. 1802334 Year of manufacture: 1992 Volume flow at 6 bar: 440 l/min Intake capacity max.: 630 l/min Max. pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz (with 16 A plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to cut-off pressure of 10 bar: 5 min Dimensions (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg Fjdpfx Afowypqroljpb Good condition

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 5.000 l, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 944 kg, obratovalni tlak: 14 letvica, tlak (maks.): 14 letvica, priključek za stisnjen zrak: 14 letvica, pritisk: 14 letvica, temperatura: −20 °C, We manufacture the serially produced pressure tanks offered here in both horizontal and vertical configurations, covering a wide range of pressures and volumes in compliance with the Pressure Equipment Directive 2014/68/EU. This directive specifies the requirements for pressure equipment put on the market within the European Economic Area (EEA), applying to equipment with a maximum allowable pressure over 0.5 bar above atmospheric pressure. The PED (Pressure Equipment Directive) places a strong emphasis on product safety. Materials used in the construction of pressure equipment must meet strict quality standards as defined by the directive. Design, production, inspection, and installation processes must all be carried out in a manner that ensures safety. Fpodor En Ttopfx Aflob Our pressure tanks are suitable for a wide variety of applications. Argon tanks, for example, are used for welding alloyed and non-alloyed steels, while nitrogen tanks are used in industries such as pharmaceuticals, electronics, gas, and oil. Compressed air tanks are commonly used for storage and to minimize pulsation and loss of compressor-generated air. When installed in compressor rooms, these tanks also serve to cool compressed air and assist in clearing moisture and condensate from the system, thus prolonging compressor service life by reducing operational hours. The pressure equipment we manufacture bears the CE mark and comes with complete documentation required for commissioning approval by the Technical Inspection Authority. We design and manufacture industrial pressure tanks to meet a broad spectrum of requirements. Throughout every stage of cooperation—from inquiry and design intent to final inspection and acceptance by regulatory authorities—we provide support from our team of engineers and inspectors from the notified body. We offer tanks designed for use with various media: compressed air, oxygen, nitrogen, technical gases, water, and dry bulk containers for the medical and chemical sectors. Our tanks are available in both horizontal and vertical configurations and across a wide range of pressures and capacities, in conformity with Directive 2014/68/EU. We have our own in-house design office, enabling us to execute custom and non-standard projects, for which we possess all the necessary qualifications and authorizations.

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Recirculating Curing Oven Powder Coating Oven NEW SLS-90/O * D+t Pass-Through Oven, Can be Separated Working dimensions: 1400 mm width x 2000 mm height x 6500 mm depth External dimensions: 1920 mm width x 2810 mm height x 6800 mm depth Power supply: Electric Nominal power: 90 kW Voltage: 380V Fodpfecutrljx Aflopb Frequency: 50-60Hz Door type: 2 doors on both sides – pass-through oven Anti-explosion lock Warm-up time: 15-30 min (180 °C) Temperature homogeneity:

Stanje: novo, Stapler PN 91120 D – Single trigger operation Higher withdrawal values and reduced edge distances compared to round head nails • Ideal for lathing, as it results in less splitting • Versatile due to its large staple length range • Also suitable for structural timber construction Fpodpovcmifjfx Aflsb Technical details: • Staple width: 11.76 mm • Wire gauge: 2.0 mm • Staple length: 65 to 120 mm • Magazine capacity: 125 staples • Air consumption at 6 bar (approx.): 2.5 l/shot • Weight: 5.1 kg The stapler is new and unused. There may only be slight signs of storage, as the device was on display in our showroom. You will receive an invoice with VAT shown separately. Payment: Advance bank transfer only – NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 525, High-performance vacuum for dust, smoke, and chips Suction capacity: 7.58 m³/min Vacuum: 520 mbar Air requirement: 3.25 m³/min Suction nozzle: NW 76 mm Suction hose: 5.5 m Collection container: 60 liters HEPA safety filter cartridge: 2.2 m² - Dust class H Fsdop Sczbepfx Aflepb Required space (L x W x H): 1,100 x 680 x 2,200 mm Weight: approx. 130 kg

Leto izdelave: 2015, Stanje: novo, Rotary Drum Dimensions: Length: 6000 mm Inner Diameter: Ø 1600 mm Fpjdpscmxzijfx Aflob Outer Diameter: Ø 2280 mm Max. Temperature: 1200ºC Heating: Natural Gas Heating Power: 2700 kW Melting Capacity: 6000 kg/h The plant essentially consists of: - Melting Furnace - Hydraulic Unit and Tilting Mechanism - Heating System - Carousel with Molds - Charging Trough - Measurement and Control System

Stanje: rabljeno, Pneumatic Press, Compressed Air Press BOSCH Type Serial No.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Fjdpjh U Dtuofx Aflepb Table surface: 245 x 200 mm Ram area: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on metal frame with wooden panels Required space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight incl. table base: 140 kg Good condition

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 5.000 l, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 794 kg, obratovalni tlak: 11 letvica, tlak (maks.): 11 letvica, priključek za stisnjen zrak: 11 letvica, pritisk: 11 letvica, temperatura: −20 °C, We manufacture the offered series pressure tanks in horizontal and vertical configurations, covering a wide range of pressures and volumes, in compliance with the Pressure Equipment Directive 2014/68/EU. This directive sets out the requirements for the placing on the market of pressure equipment within the European Economic Area (EEA). It applies to pressure equipment with a maximum allowable pressure above 0.5 bar over atmospheric pressure. The PED places great emphasis on product safety. Materials used in the manufacture of pressure equipment must meet strict quality standards according to the directive. Design, manufacturing, inspection, and installation of the pressure vessels must all be carried out to ensure maximum safety. Our pressure tanks offer a wide range of applications. Argon tanks are typically used, for example, in welding alloyed and non-alloyed steel. Nitrogen tanks are employed in industries such as pharmaceuticals, electronics, gas, and oil. Compressed air receivers are mainly used for storing and dampening pulsation and minimizing losses of air produced by compressors. Pressure vessels installed in compressor rooms are also used for cooling compressed air and serve as auxiliary devices in the purification of compressed air from water and condensate. In addition, these tanks increase the service life of compressors by reducing their operating times. All pressure equipment manufactured by us bears the CE marking and comes with complete documentation required for commissioning approval by the Technical Inspection Authority. We design and manufacture pressure tanks for a broad range of industrial sectors. At every stage of cooperation—from the initial inquiry, through project planning, up to the acceptance of the finished tank by the supervisory authority—we ensure the support of our team of engineers and certified inspectors. We offer tanks suitable for operation with various media: compressed air, oxygen, nitrogen, technical gases, water, and bulk material containers for medical and chemical industries. Fjdpjr En Tajfx Aflopb We manufacture both horizontal and vertical pressure vessels in a wide spectrum of pressures and volumes in accordance with Directive 2014/68/EU. Our in-house design office enables the execution of custom and non-standard projects, for which we possess all necessary certifications and authorizations.

Stanje: zelo dobro (rabljeno), Walking beam furnace – forging furnace, Ruppmann make Fpsdpeid Im Esfx Afleb Maximum temperature: 1,250°C Working dimensions (L x W x H): 3,400 x 1,350 x 120 mm Throughput: 1 ton/h Heating type: Natural gas Heating via 4 bloom hot-air ceiling radiant burners, with flame monitoring via Kromschröder burners. Temperature measurement by thermocouples, with automatic and stepless temperature control. Recuperator, combustion air fan.

Stanje: rabljeno, Pneumatic screwdriver, air screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Selector switch for clockwise and counterclockwise rotation (rotary ring control) - Without automatic shut-off - Pneumatic control line Ø 4 mm - Air supply connection for screwdriver function min. Ø 10 mm - Aluminium bracket for handling device - Screw feed Ø 12 mm (internal diameter) Dimensions L x W x H: 60 x 46 x 870 mm Weight: 2.8 kg Good condition Fpedpofgrrhjfx Afljb 4 units available, price per screwdriver

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 5.000 l, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 649 kg, obratovalni tlak: 8 letvica, tlak (maks.): 8 letvica, priključek za stisnjen zrak: 8 letvica, pritisk: 8 letvica, temperatura: −20 °C, We manufacture the offered series pressure tanks in both horizontal and vertical configurations, covering a wide range of pressure ratings and capacities in compliance with the Pressure Equipment Directive 2014/68/EU. This directive specifies the requirements for pressure equipment to be placed on the market within the European Economic Area (EEA) and applies to equipment with a maximum allowable pressure greater than 0.5 bar above atmospheric pressure. The PED places major emphasis on product safety. Materials used for the construction of pressure equipment must meet the strict quality standards set forth by the directive. Design, manufacturing, inspection, and installation processes must be carried out in a manner that guarantees safety. Our pressure tanks serve a wide array of applications. Argon tanks, for instance, are used in welding alloyed and unalloyed steels, while nitrogen tanks are commonly employed across the pharmaceutical, electronics, gas, and oil industries. Compressed air receivers are used internally for air storage and to minimize pulsations and loss of air supplied by compressors. When installed in compressor rooms, pressure tanks also help cool the compressed air and serve an auxiliary function in removing water and condensate from the air. Additionally, these tanks extend the service life of compressors by reducing their operating times. All pressure equipment we manufacture bears the CE marking and is supplied with complete documentation required for operational approval by the Technical Inspection Authority. Fpodpfx Aer En S Defljb We design and produce pressure vessels for industries in a broad sense. At every stage of the cooperation—from initial inquiry and design intent through to acceptance of the finished tank by regulatory authorities—we guarantee professional support from our team of engineers and inspectors from an accredited body. We offer tanks suitable for various media: compressed air, oxygen, nitrogen, technical gases, water, as well as bulk material containers for the medical and chemical industries. We manufacture horizontal and vertical tanks in a wide range of pressures and volumes, always in accordance with the PED 2014/68/EU. Our in-house design office allows us to deliver bespoke, non-standard projects, for which we possess all required competencies and authorizations.