Martin Tc660 nakup rabljenega (93)

Stanje: zelo dobro (rabljeno), Motor 9,5 kW, vreteno 30 mm, dolžina mize 240 cm, širina 35/120 cm. Djdpfx Aeyy Np Iepwsku

Stanje: rabljeno, Leto izdelave: 1981, rabljeno, v dobrem stanju očiščeno, podmazano delno obnovljeno popolnoma nastavljeno deli obnovljeni Proizvajalec: Martin Tip: T 70 Leto izdelave: 1981 Št. stroja: V-112873 GS testirano Motor: 4,8 kW Jeklene vodilne tirnice Dolžina reza cca 2700 mm Nastavljiv do 45° Paralelogramska zaščita Podaljšek mize Višinska nastavitev hidravlična Nagibna nastavitev hidravlična Kotno vodilo Priključek za odsesavanje D 120/80 mm Potreben prostor cca 2800 mm x 3400 mm x 1200 mm Teža cca 1000 kg Lokacija skladišča: 97447 Gerolzhofen, prost naložen, brez embalaže Dkjdpfx Aowkvw Topwsu Predaja v obstoječem stanju kot vidno, brez garancije ali jamstva

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Dsdpfjv Erkaex Apwjku Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: rabljeno, Skobeljni stroj MARTIN T51 - rabljeno - tihi robovi miz, vodilni trak, motorna zavora Dkedoxm R Upjpfx Apwju ----- Tehnični podatki ----- širina skobljanja: 51 mm, dolžina mize: 2.520 mm, maks. odvzem: 16 mm, premer valja: 120 mm, število nožev: 2 kosa, nastavljiv kot vodila: 0-45°, priključek za odsesavanje: 140 mm, moč motorja: 4,8 kW

Stanje: zelo dobro (rabljeno), Motor 4,7/5,7 kW, vreteno 30 mm, dolžina mize 100 cm Djdpfoy S S H Hsx Apwoku

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 1.650 h, moč: 5,5 kW (7,48 KM), največja višina reza: 130 mm, največja širina rezanja: 1.250 mm, premer žaginega lista: 400 mm, nastavitev nagiba žaginega lista: 46 °, vrsta nastavitve višine: električni, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, skupna dolžina: 3.200 mm, skupna širina: 2.100 mm, skupna višina: 1.900 mm, skupna masa: 1.300 kg, Oprema: CE označba, dokumentacija / priročnik, dozator, Št. 04550 Krožna žaga za obdelavo plošč Martin T 60 CLASSIC Rabljen stroj, letnik 2007, približno 1650 delovnih ur Dolžina pomične mize 3000 mm Širina reza 1250 mm Premer žaginega lista 250 – 400 mm Premer luknje žaginega lista 30 mm Maks. višina reza 130 mm Moč motorja 5,5 kW Število vrtljajev 4000 / 4800 / 6000 vrt/min, z digitalnim prikazovalnikom Pnevmatsko upravljana enota za predrezovanje z 2 osmi Moč motorja enote za predrezovanje 0,75 kW Električno nagibanje žaginega lista 0° – 46°, z digitalnim prikazovalnikom Električna nastavitev višine reza, z digitalnim prikazovalnikom Ročna nastavitev širine reza s pomočjo ročice, z digitalnim prikazovalnikom Sistem za hitro menjavo orodja SprintLock Upravljanje stroja preko na dotik občutljivega zaslona Različni programi za rezanje, vključno s programi za falcanje, utore, kotne profile, žlebove in čepove ter za merjenje verig Prečna miza, približno 1300 x 650 mm (D x Š x V) Raztegljiv dolžinski opornik do 3200 mm z 2 opornima plošči 2 priključka za sesanje, premer 120 in 100 mm Vključno s popolno tehnično dokumentacijo, 2 žaginima listoma in 3 klinastimi vstavki Dedpfxszq Aqwe Apwsku Dimenzije za transport, približno 3200 x 2100 x 1900 mm (D x Š x V) Teža, približno 1300 kg Za izognitev morebitnim nesporazumom je možen in priporočljiv ogled stroja na licu mesta po predhodnem dogovoru. Prodaja poteka v trenutnem stanju. Tehnični podatki, opis stanja, letnik in obseg dobave so v skladu s prospektom proizvajalca oz. prejšnjega lastnika, brez garancije. Pridržujemo si pravico do vmesne prodaje. Za rabljene stroje je izključena kakršna koli garancija, velja načelo: „kupljeno, kot je bilo ogledano“. Pogoji plačila: cene so navedene brez davka na dodano vrednost (DDV), plačilo je potrebno pred prevzemom oz. pošiljko. Pogoji dostave: iz skladišča.

Stanje: rabljeno, Leto izdelave: 1980, Martin čelilna vretenasta rezkalka Model: Martin T 23 Letnik: 1980 Premer vretena: 30 mm Hod vretena: 145 mm Maks. premer orodja: 250 mm Motor z menjavo polov: 4,7/5,7 kW 2 hitrosti: 3000, 6000 min⁻¹ Velikost mize: pribl. 940 x 1100 mm Višina mize: pribl. 850 mm Samodejna zavorna motorja Stikalo za izklop v sili Teža: pribl. 800 kg Dsdpey Rzytsfx Apwjku

Stanje: rabljeno, Leto izdelave: 1976, z zračno dvižno vreteno za uporabo 2 orodij na enem vretenu rabljeno, dobro ohranjeno Izdelovalec: Martin Tip: T24 Leto izdelave: 1976 Št. stroja: 91716 Motor 7,5 kW / 10 KM, ojačan 1-hitrostni motor 4 stopnje hitrosti: 3000/4500/6000/9000 min⁻¹ mehanska zavora Premer vretena 30/40 mm x 200 mm Največji premer orodja na vodilu 250 mm Velikost mize 1000 mm x 900 mm Podaljšek mizne plošče cca 2400 mm Izvlečna podporna letev Višinska nastavitev pnevmatska Potrebni prostor cca 2400 mm x 1000 mm x 1400 mm Dedpfsvwfiasx Apwjku Teža cca 800 kg Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nezapakiran Predaja v stanju, v katerem je bil ogledan, brez jamstva in garancije

Stanje: rabljeno, Leto izdelave: 1990, z vretenom s Tersa rezili Stroj v delovanju Dkedpfx Apezg Nl Tswou popolnoma nastavljen rabljen dobro ohranjen očiščen preverjeno delovanje delno obnovljen Znamka: Martin Tip: T43 Leto izdelave: 1990 Št. stroja: V 177666 GS-preverjeno Preverjeno na lesni prah (GS) Segmentirani pritisni nosilec Gumijasti podajalni valj Gumijasti izvlečni valj Podajalna hitrost m/min: 6 9 12 18 m/min Število rezil: 4 Samodejna zavorna enota motorja Tersa obojestranska rezila Digitalni prikaz za višino skobljanja Električna nastavitev višine s fino nastavitvijo tipke Moč motorja kW: 5,5 Širina skobljanja pribl. mm: 630 Višina skobljanja pribl. mm: 250 Priključek za odsesavanje mm: 160 Potrebni prostor pribl. D x Š x V mm: 1200x1250x1200 mm Teža pribl. kg: 1000 Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v dejanskem stanju, kot je bilo ogledano, brez garancije in jamstva

Stanje: novo, Leto izdelave: 2025, Martin panel saw T 77 – new stock machine – Top Features – Double-sided tilting – Equipment: - T 7710/2-a PREX saw unit, double-sided tilting - T 7725/2-a Cutting height 205 mm - T 7720/2-a Infinitely variable drive power 5.5 kW - T 7730/4-a Sliding table length 3.3 m - T 7735/3-a Cutting width 1350 mm - T 7743-a Electronically controlled parallel fence, can be lowered in end position - T 7755-a 3-axis scoring unit - T 7757-a Scorer lighting Safe Light - T 777572-a RadioCompens angle cutting system with continuous fence - T 7780/1-a Rear table extension 610 x 860 mm - T 7792/2-a Sensor monitoring for side-shiftable safety guard, 2 x 45 degrees Dksdjw D T Dkopfx Apwju - T 7704/2-a ConnectPad 12.9" / 13" - T 7704/20-a OtterBox Defender Case - T 7706/1-a ConnectApp at Classic operation level Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2003, Proizvajalec: Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Leto: 2003 Tip: Laboratorijski in pilotni liofilizator (freeze-dryer) Uporaba: Sušenje trdnih ali tekočih vzorcev v vialah, steklenicah, ampulah, prirobnicah, pladnjih ipd. Primeri izdelkov: - Biološki proizvodi: bakterije, virusi, tkiva, rastlinski ekstrakti - Farmacevtski proizvodi: plazma, serum, protitelesa, cepiva - Biokemijske analize - Živilski izdelki: fermente, vitamine Splošni podatki: - Predzamrzovanje, liofilizacija (sublimacija) in končno sušenje - Delovanje pod vakuumom, < -10°C - 3 + 1 police - Površina polic: 0,3 m² - Razmak med policami: 68 mm - Programska oprema: SCADA - Čistilna prirobnica - Sistem za ekstrakcijo vzorcev - Ročna zapirala za viale Ledni kondenzator: - Kapaciteta: 8,0 kg - Zmogljivost: 6,0 kg / 24 h - Temperatura: -75°C Dimenzije: - Širina: 800 mm - Globina: 840 mm - Višina: 1640 mm - Teža: cca 650 kg Energetski podatki: - Napajanje: trifažno, 400 V / 50 Hz - Poraba energije: maks. 5,0 kVA - Najvišja temperatura okolice: +25°C Hladilno sredstvo: - Tipi: R404A, R508, Isceon 89 - Toplotni prenosni medij: Syltherm XLT Djdeygndpspfx Apweku Tehnične priključitve: - Priklop tople vode: ½" cevni priklop - Izpust vode za odtajanje: ½" cevni priklop - Vakuumski izpuh: cev iz nerjavečega jekla, DN 25 - Prezračevanje: priklop DN 6 Ostalo: - Na voljo dokumentacija in kvalifikacije - Prodano skupaj z računalnikom LPC plus za analizo podatkov - Rezervni deli

Stanje: rabljeno, Ta oglas je za Hulme Martin 10/3319 toplotni zvarilec. Dkodpfxsxuiv Ie Apwju Enota je popolnoma delujoča in pripravljena za takojšnjo oddajo. Gre za impulzne toplotne zvarilce (za zvarjanje enakih termoplastičnih folij), zvarilce s konstantno toploto (za laminirane ali folijske materiale), vakuumske zvarilce in drugo dodatno opremo. Zasnovan za dolgo življenjsko dobo (po navedbah proizvajalca več kot 20 let uporabe) in enostavno vzdrževanje z izmenljivimi grelnimi palicami in cenovno ugodnimi potrošnimi materiali.

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Dksdpfx Ajpgkmwspweu Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), Angle adjustment Speed control Central spindle lubrication 5 kW motor Spindle diameter 30 mm Table length 240 cm Table width 35 cm Support extendable up to 80 cm Request more information Dodpfx Apswtl N Djwjku

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Dkedpjpq If Dofx Apweu Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1994, delovna širina: 240 mm, višina skobljanja: 160 mm, širina skobljanja: 240 mm, delovna višina: 160 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 6.000 obr/min, višina obdelovanca (maks.): 160 mm, priključek za stisnjen zrak: 6 letvica, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 111 A, Ponujamo generalno obnovljen stroj za skobljanje in profiliranje OTTO MARTIN T 90, letnik 1994. Tip: T 90 Serijska številka: V 215410 Letnik izdelave: 1994 Delovna širina: 240 mm Delovna višina: 160 mm Število obratov: 6000 obr/min Napetost: 400 V Frekvenca: 50 Hz Število faz: 3 ~ Nazivni tok: 111 A Dkodpoyq D Ifefx Apwsu Delovni tlak: 6 bar Če imate vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, 3200 mm voziček Nagibno rezilo s hidravličnim dvigom in spustom Rezalnik 380V Prodano v stanju, kot je, brez pregleda Dedoyf Eptjpfx Apweku

Stanje: rabljeno, Leto izdelave: 1989, Krožna žaga za obdelavo robov Proizvajalec: Martin Tip: T 72 Letnik izdelave: 1989 Tehnični podatki Premer žaginega lista min. 200 mm Premer žaginega lista maks. 450 mm Število vrtljajev 2800/4000/5500 vrt/min Napetost 380 V, 50 Hz Nazivni tok 18,0 A Opomba: Tehnični podatki in opisi so prepis iz takratne potrditve naročila. Podatki so namenjeni informiranju in niso zavezujoči. Dkodpfx Ajzuyx Tjpwju

Stanje: zelo dobro (rabljeno), Vreteno 30 mm Širina mize 100 cm 3-valjni podajalec Stranske plošče dolžina 110 cm x2 Dedpfeygxciex Apwoku

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Dkedeqlck Nopfx Apwju Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Dsdsqlckpepfx Apwoku Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Leto izdelave: 1958, stanje: pripravljen za uporabo (rabljen), V ponudbi je klasični stružni stroj. Premer obdelave nad posteljo: 500 mm, premer obdelave nad suportom: 300 mm, premer vretena: 58 mm, konus v konici: MK 4, izvedba: klasični vodilni in vijačni stružni stroj, upravljanje: ročno. Oprema: triko čeljustna glava, štiripoložni nosilec orodja, konjiček, posoda za ostružke. Teža: cca. 2200 kg, skupne dimenzije D/Š/V: cca. 2700 mm/1100 mm/1350 mm. Ogled možen po dogovoru. Dksdpfxozdknwj Apwju

Stanje: dober (rabljeno), Leto izdelave: 1988, KMK 40 lathe. Spindle speed: 1800 rpm. Turning length: 1000 mm. Includes 3-jaw and 4-jaw Multix chuck with 4 inserts, live center, faceplate, collet chuck with collet set. Dkodpfxsu Uh U Io Apwsu

Leto izdelave: 2000, stanje: dober (rabljeno), Pritiskalna prečka za krožno žago za pritrjevanje plošč ali furnirjev za 3 m drsni voziček. Djdpfotxirfox Apwoku

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available - Dedoqlclbspfx Apwjku