Kovinski Tiska nakup rabljenega (10.016)

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 79719, Vertical Press Delivery Heidelberg VSA-66.1, Year 1996 - Serial No. 79719/96-239513 Max. working width: 660 mm Marking device included Online video inspection possible via Skype We would be pleased to welcome your visit – more machines in stock Available immediately – inspection possible Ibsdpelg Aadofx Ah Dsc Located in Emskirchen/Nuremberg – testing available on site

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 2025, Stanje: novo, Rotary tablet press SPT-TP500D with double-sided pressing; Ijdpfx Ahody Dz As Dobc 2-layer (bilayer) production; Touchscreen, PLC control panel; HMI (Human Machine Interface); SPT-TP 500D Number of stations (max.): D=41 / B=49 / BB=59 1. Max. tablet output (double-sided): T/h – 270,000 / 360,000 / 420,000 Max. output 2-layer: T/h – 90,000 / 115,000 / 140,000 2. Max. tablet diameter Round (mm): 13 / 16 / 25 Shaped: 14 / 19 / 25 3. Max. tablet thickness (mm): 8.5 4. Max. main compression force (t): 10 6. Dimensions (mm): 1150 x 1550 x 1950

Leto izdelave: 2025, Stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. Isdpfx Aodubpujh Djbc ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Pressure: 45 tons Installation height: 205/305 mm Table: 700 x 450 mm Ram: 700 x 360 mm Ram adjustment: 50 mm Stroke: 10 - 50 mm Strokes per minute: 80 - 400 Power requirement: 11 kW Weight: 7,200 kg Height: 3,100 mm Siemens S7 control system Feed with gripper Ijdpjgfvnnofx Ah Djbc

Stanje: zelo dobro (rabljeno), Pressing force: 300 TON Model: 2MR Year of manufacture: 2000 Table dimensions: 1,750 x 1,250 mm Slide adjustment: 160 mm Continuous speed (variable): 10–30 spm Slide stroke: 250 mm Shut height: 500 mm Main motor power: 32 kW Hydraulic safety: present Ibodjq N Etzepfx Ah Dsc

Leto izdelave: 1999, Stanje: dober (rabljeno), We are selling the membrane press for kitchen doors or door frames, etc. Ibodpfx Asd Ew Tbeh Dec Manufacturer: Italpresse, Model: Form Air. Year of manufacture: 1999. Working area: 2330 x 780 mm. Inspection possible. Complete documentation included.

Stanje: zelo dobro (rabljeno), Acword BR100 Extraction Unit with Workstation Metal extractor by Acword, featuring a Bosch Rexroth workstation and drawer cabinet Exhaust airflow: 1010 m³/h Connection port: 100 mm Noise level: 83 dB Inlet pressure: 2550 Pa Voltage: 400 V Weight: 65 kg Air outlet velocity: 32 m/s Ibodjhufbcopfx Ah Djc Frequency: 50 Hz Height: 1490 mm Filtration area: 6 m² Motor power: 1.1 kW Width: 594 mm Waste container volume: 0.0338 m³ Number of phases: 3 Length: 670 mm Complete factory closure, large selection of mezzanines, pallet racks, shelving systems, and vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. You will find more articles – new and used – in our shop! International shipping costs on request!

Stanje: rabljeno, Manufacturer: EATON Type: AB 12240 E 36 units available Ieded N Sv Nopfx Ah Dsbc New stock

Stanje: kot nova (razstavni stroj), - Press force: 700 kN Isdpfxowazno Ah Dobc - Press size: 2500 x 1250 mm - Medium heated (water), incl. heating unit up to a temperature of 85°C. - Incl. Joos A.B.S. system for protection of the heating plates in case of incorrect loading Price on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Ram surface: 700 x 350 mm Stroke: 01-120 mm Ibodpfsdvb Tfjx Ah Djc Max. strokes per minute: approx. 70 Power requirement: 22 kW Weight: 8,500 kg Height: 2,900 mm

Stanje: rabljeno, HYDRAULISCHE PRESSE SMG PRESSKRAFT: 300 t HUBLÄNGE: 700 mm Ibodpotndu Ujfx Ah Doc LEISTUNG: 30 kW TISCHOBENMAßE: 1500 (1600) x 1300 mm TISCHUNTENMAßE: 1500 (1600) x 1300 mm ZIEHKISSEN: 100 t HUBLÄNGE ZIEHKISSEN: 280 mm GEWICHT: 28.000 kg VOLLSTÄNDIG GENERALÜBERHOLT – WIE NEU ALLE KOMPONENTEN ERNEUERT (DICHTUNGEN, PUMPEN usw.)

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Ijdpfx Ahjd Ixade Debc Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Leto izdelave: 2020, Stanje: novo, The PT-400 belt press is a machine designed for extracting apple must. This process takes place between the machine’s belt and appropriately positioned press rollers. The extracted juice is pumped directly into the pasteurizer tank. The entire unit is constructed from AISI 304 stainless steel. TECHNICAL SPECIFICATIONS: - Capacity: up to 500 kg of apples per hour - Juice yield from pressed apples: up to 75% - Installed power: 0.8 kW, 230V - Water consumption: up to 4 l/min - Weight: 500 kg - Belt width: 400 mm - Adjustable belt speed - Juice tray with screen, mesh diameter: 1 mm Isdpfx Asfgl Hfeh Dsbc - Juice pump included

Stanje: dober (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, 2 METAL SIDEWALL FEEDERS, model 1100x12x2.5-P200, Ibsdpfx Aovtqa Ash Dec

Stanje: kot nova (razstavni stroj), Technical Data: Maximum pressing force: 800 kN Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C. Isdpjfhqhdsfx Ah Dobc

Leto izdelave: 1983, Stanje: rabljeno, Pressure: 75 tons Table: 630x620 mm Slide: 500x450 mm Installation height: 370 mm Slide adjustment: 80 mm Lateral column passage: 300 mm Stroke adjustable: 8-100 mm Isdpfxectl Dts Ah Debc Strokes per minute: 7-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm SIRI roller feeder for material 300x3 mm Hydraulic overload protection Hydraulic Ortlinghaus clutch with auxiliary brake

Stanje: rabljeno, Manufacturer: TRUMPF Model: CS20a Ibodpfx Ae Dv I Teh Dsc EXCELLENT CONDITION

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. Ibsdpjd Ixbzofx Ah Doc The removed burrs are collected in a plastic container.

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Ijdpfxovn U S Se Ah Dsbc Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Iedpfx Ahefxykps Djbc Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Ibodpfxjd Evcwe Ah Dec Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Ibedpfxovnwfns Ah Doc Ram surface 860x620 mm Table height 900 mm Manual lever operation Pressure cut-off

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Iedpfofxykwex Ah Djbc Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Ijdpfx Ahodxvfho Debc Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Oil tank: 300 l