Kovač Forge nakup rabljenega (198)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 1.685 h, največja hitrost: 80 km/h, skupna masa: 11.500 kg, skupna višina: 2.500 mm, mobilnost: stacionaren, številka stroja/vozila: 11520, For sale: this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were newly replaced just a few operating hours ago. Several spare flails are still available and will be included. All 8 V-belts were also recently replaced a few operating hours ago. Both NOx sensors and the AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not roadworthy/road-licensed. Throughput: 60-100 m³/h depending on material and feed equipment Recommended max. log diameter: 200 mm Machine number: 11520 Max. rpm: 1200 rpm Operating voltage: 24 V Hjdpfx Adoy Hi D Sorofh Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated "HFG (Husmann Forest Machines)", achieve uniform, fine, and clean shredding through special impact technology and the arrangement of the flails. The shredded material is conveyed via a large intake hopper equipped with a forged steel chain conveyor to the feed roller and then to the flail rotor. The pendulum-mounted feed roller is rack-guided and driven hydraulically by a large reduction gear. The feed roller, which adjusts to the incoming material, can also be controlled and lifted by remote control. The roller or feed opening of 460 mm ensures smooth and quick feeding. The robust rotor made of high-quality steel (1000 kg) is shatterproof even when processing heavy foreign objects, thanks to additional reinforcements and sophisticated construction technology. Mounted on the eight hardened flail shafts are 60 free-swinging flails, arranged offset. The quick-change system involves bolting the tungsten carbide-tipped flail tips to the flail holder. The large number of 50 mm wide flails and the rotor's direction of rotation across a breaker edge onto the feed belt allows for optimal shredding of material, making it suitable for composting. The load-dependent and steplessly adjustable feed speed of the scraper floor and feed roller allows further control and improvement of the quality of the output. The design of the rotor housing and discharge area allows the material pile to reach a height of up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, ensuring ease of operation and maintenance. Clear controls and safety features such as rotor overload protection and reverse mechanism are hallmarks of our system. The mobile shredding unit is equipped with an 80 km/h chassis with air brakes and is optionally available as a stationary unit or fitted with a hook-lift frame. The HFG IV is a composting machine for organic and inorganic waste designed for mechanical feeding." If you have any questions or need more information, feel free to send us a message or call us.

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC Hfedpfsxacdvjx Adroh - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: novo, For inquiries regarding attachments, Mr. Herden will be happy to assist you (by phone: ...). Kinshofer Clamshell Bucket / Two-Shell Grab / Grapple / KM 604 - 350 / NEW Price: €5,300.00 net / €6,307.00 gross Capacity (liters): 350 Width E (mm): 650 Maximum opening (mm): 1,390 Number of teeth: 5 Weight (kg): 240 Closing force (kN): 20 Load capacity (kg): 3,000 - Including bolt-on excavator teeth - Including KM 04 F rotator motor Operating pressure: 26–32 MPa (260–320 bar) at 40 – max. 75 l/min The KM 604 is a practical two-shell grab for daily use – robust, functional, and cost-effective. - Maximum loading height due to compact design with horizontally mounted cylinder. - Long service life thanks to use of knife-edged material with Brinell hardness 500 HB and generously dimensioned bearings. - Synchronized shell movement due to robust, forged compensation linkage. - Bolt-on excavator teeth included as standard. - Excellent digging performance due to high closing force (20 kN at 26 MPa operating pressure). We have a very large selection of various attachments in stock, ready for immediate delivery! Mr. Herden (phone: ...) will be happy to assist you. Financing offers available on request. We are official distribution and service partners for: - Magni telehandlers - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealerships in Germany. Hfedpeyi Rz Njfx Adrsh Errors and prior sale excepted! = More Information = Intended use: Construction Contact Marius Herden for further information.

Stanje: rabljeno, Visokotlačna hidravlična enota do 630 bar WEBER tip E45 / 59600.0 Visokotlačna enota + hidravlične razpirne klešče, hidravlični razpiralec Leto izdelave 1988 / 1986 Hidravlična enota tip E45 / 59600.0 Obratovalni tlak max. 630 bar Pretok cca 2 l/min Prostornina rezervoarja cca 10 litrov Razpirna naprava – klešče WEBER tip SP30 / 59 198.0 Izteg = dolžina roke 340 mm Razpiralna razdalja max. 610 mm Razpirna sila v delovnem območju max. 132 kN Zapiralna sila 99 kN - Dvojna cev z hitrospojko Hfjdpfedzp S Rox Adreh Nazivna moč 0,9 kW Priključna napetost 220 V, 50 Hz Teža hidravlične enote cca 40 kg Teža razpirne naprave cca 25 kg Zelo dobro stanje Hidravlični gasilski reševalni komplet s hidravlično enoto in razpiralcem. Razpiralec je namenjen ustvarjanju reševalnih odprtin po prometnih nesrečah z razpiranjem. Lahko se uporablja tudi za stiskanje ali dvigovanje bremen. Vsestranski za uporabo zaradi večfunkcijskih čeljusti razpiralca iz odkovanega in kaljenega jekla.

Stanje: novo, delovna širina: 125.000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. floating attachment / NEW machine / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 15 tons - Universal interface for mounting various adapter plates - S420: Double-walled housing made from high-strength S420 steel - WEARPLATE: Housing with replaceable wear plates - LOW PROFILE: Low-profile design - Indirect belt drive with 4 V-belts - Drive designed for hydraulic motor, depending on the oil supply of the carrier machine - 4D ROLLER: Reinforced support roller, 152 mm Ø, with double conical roller bearings, height-adjustable - COUNTER CUTTERS: Two rows of interchangeable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 100–300 - Required oil flow in l/min (min-max): 55–150 OPT 099 Floating Attachment (Parallelogram link) OPT 555 Pendulum Adapter 3 hydraulic lines required: pressure, return, and drain line. Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very wide selection of different Seppi M. products in our warehouse, ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing options available upon request. We are an official sales and service partner for Westtech, OilQuick, Holp, Magni telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB construction equipment, Mercedes-Benz, and Iveco. Hfjdpjyix Hajfx Adrsh With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1998, teža obdelovanca (maks.): 15.000 kg, pomik po osi Z: 1.000 mm, zunanji premer vpenjalne glave: 1.750 mm, največja hitrost vretena: 400 obr/min, premer struženja: 2.100 mm, višina struženja: 1.350 mm, največja hitrost vrtenja: 3.000 obr/min, podajalna sila osi Z: 50.000 N, leto zadnje generalne obnove: 2026, Das Modell Millennium bietet höchste Präzision beim Drehen sowie vielseitige Bearbeitungsmöglichkeiten. Immer präzise, immer leistungsstark. Merkmale dieser Maschine: – Evolvente Kettenantrieb für sehr hohe Drehzahlen bei minimaler Geräuschentwicklung – 36" Timken Kreuzrollenlager mit besonders großer Tragfähigkeit – siehe letzte Seite für Details – 1750 mm 4-Backen-Stahlfutter für hohe Drehzahlen. Maximale Beladung: 15.000 kg – Servo-angetriebene C-Achsen-Steuerung für spielfreie C-Achsen-Bewegungen – hohe Leistung, höchste Genauigkeit – 200 mm quadratischer Schmiederammbalken aus Stahl – garantiert höchste Präzision auch bei schwerem Schnitt; integriert ist eine 15 kW ISO 50 Kegel- angetriebene Spindel mit Drehzahlen von 20 bis 3.000 U/min für Konturdrehen, PCD-Bohren, Winkel- und Flächenfräsen sowie Schleifen mit Zubehör (neue Fräsköpfe auf Wunsch verfügbar). Max. Werkstückhöhe unter dem Schlitten: 1.350 mm – Automatische Aufnahme von Drehwerkzeugen, angetriebenen Werkzeugen und Zubehör direkt aus dem 18-fach Werkzeugmagazin Hedpfxsy Uwxts Adrefh – Heben und Senken des Querbalkens mit präzisem Verriegelungs- und Klemmmechanismus in 200-mm-Schritten – höchste Flexibilität ohne Genauigkeitsverlust Ausgestattet mit Fanuc 18Ti Steuerung. Eine hochpräzise, leistungsstarke und vielseitige Werkzeugmaschine. Erfüllt sämtliche Aufgaben gemäß der Fotogalerie. 12 Monate Garantie.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Tlak 36,0 t Hod 250 mm Ploščato železo na visoki rob 200 x 10 mm Delovna hitrost 6,0 - 24,0 mm/min Povratna hitrost 60,0 mm/min Delovna višina 900 mm Miza: 580 x 1170 mm Skupna potrebna moč 4,1 kW Motor 400 Volt 50 Hz Količina olja 60,0 ltr. Teža 1100 kg Mere D-Š-V 680 x 1170 x 1130 mm trenutna nova cena ca. 28.000 Euro Posebna cena na povpraševanje Oprema: - elektrohidravlični horizontalni upogibni stroj - velik, robusten strojni pult iz kaljenega jekla - stroj iz kaljenega in brušenega kovano jekla Hsdpfx Adeyy A Idsrefh - digitalni prikaz za nastavitev hoda - več različnih orodij za upogibanje - brezstopenjska nastavitev hitrosti upogibanja in pritisne sile - 1x prosto pomičen dvojni nožni pedal - navodila za uporabo (PDF)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option Hjdpfx Ajxw D Udedrsfh TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 80 t, širina mize: 660 mm, dolžina mize: 860 mm, prebijalna sila: 80 t, prebojna odprtina v mizi: 180 mm, nastavitev hoda: 110 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) Hedevtx H Rjpfx Adrefh - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guideways • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standard compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set manufactured to requested specifications • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Tons Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed distance: 420 mm Distance between uprights: 400 mm Ram adjustment: 85 mm Approximate width: 1400 mm Approximate depth: 1735 mm Approximate height: 2220 mm Front anchorage size: 670 mm Side anchorage size: 1040 mm Bolster hole diameter: Ø190 mm Bolster dimensions: 540×740 mm Die fixing hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Should you require changes to technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT Hsdjw Smdfspfx Adrsfh * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Hfedpfxsw Slcte Adroh Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 30 mm, STANDARD EQUIPMENT * The top, bottom, and side rolls move up and down linearly via hydraulic cylinders attached to the machine frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent parts thanks to the hydraulically opening head and automatic lifting shaft * Highly user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Upper crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Hsdpfx Adjw Sl T Serofh Bending Length: 3100 mm Pre-Bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending Hedpfsxbzptex Adrsfh * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), stiskalna sila: 250 t, hod: 160 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, globina grla: 350 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, The eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure make it a reliable performer suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control and dual-hand/foot operation Applications - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction body - Four-sided guided slide - Nodular cast iron connecting rod and gear housings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully-automatic grease lubrication - Pneumatic clutch and brake combination - Compliance with CE safety directives - Double-coil safety valve - Manually adjustable stroke - Finger-hand protection safety system with light curtain - PLC control system - Dual-hand/foot control system - Mechanical safety system - Emergency reverse motor operation - Complies with occupational health and safety regulations - Conforms to CE standards ✅ OPTIONAL FEATURES - Vibration isolation mounts - Touch LCD screen (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Coil feeder, straightener, and uncoiler - One set of dies according to requested specifications - Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (250 TON) - Capacity: 250 tons - Throat depth: 350 mm - Table–ram distance: 520 mm - Slide–table distance: 630 mm - Distance between side frames: 520 mm - Ram adjustment (regulation): 150 mm - Approx. press width: 2000 mm - Approx. press depth: 2500 mm - Approx. press height: 3100 mm - Front anchoring dimension: 930 mm - Side anchoring dimension: 1430 mm - Table hole diameter: Ø250 mm - Table size: 700×1100 mm - Die clamping slot diameter: Ø60 mm - Ram size: 670×380 mm - Table height from floor: 810 mm - Stroke adjustment: 20–160 mm - Strokes per minute: 40 spm - Motor power: 22 + 2.2 kW - Motor speed: 1450 rpm - Approximate weight: 12,000 kg Note: Please inform us if you require modifications in technical specifications. Hedpfx Adsx N Nfborjfh ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 130 t, širina mize: 750 mm, dolžina mize: 1.000 mm, prebijalna sila: 130 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 55 mm, nastavitev hoda: 140 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for series production. Key Advantages Hfedpfx Aovtyvgodreh • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance due to centralized automatic lubrication • Production-ready use with PLC control + dual hand/foot control Application Areas • Cold cutting and punching operations • Cold breaking applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel frame body • Four-face guided slideways • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection safety system with light curtain • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliance with occupational safety regulations • CE standard conformity ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of dies manufactured to customer requirements • Eight-way slide guiding ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 tons Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between uprights: 450 mm Ram adjustment (regulation): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring size: 790 mm Side anchoring size: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg Hfedpfx Aew Slxzjdrjh

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Hfsdpow Sl I Nofx Adroh Top & Bottom Roll : 460 mm Side Roll : 380 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending Hfjdsw Smb Ropfx Adroh * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed * Easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Hodew Smfcjpfx Adrefh Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 160 t, širina mize: 920 mm, dolžina mize: 660 mm, globina grla: 320 mm, prebijalna sila: 160 t, vrtina cilindra: 55 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Areas of Application - Cold punching and cutting operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction Hfjdpfx Aevtywdedrsh • 4-point slide guiding • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain finger-hand safety system • PLC control system • Dual hand/foot pedal operation system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Complies with CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster table • Decoiler, feeder, and straightener • One set of dies per requested specifications • 8-point slide guiding ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table-ram distance: 500 mm Slide-table clearance: 540 mm Distance between side frames: 500 mm Ram adjustment: 120 mm Approx. press width: 1,600 mm Approx. press depth: 2,280 mm Approx. press height: 2,750 mm Front anchor dimension: 840 mm Side anchor dimension: 1,300 mm Table hole diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Approx. weight: 7,100 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual Hodpew Slcgefx Adrsfh OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically * Protected against overload * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg Hfedjxw Eblopfx Adrsh

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, delovna širina: 3.100 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overloading * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Roll positions are easily read via three digital position indicators * Folded parts can be removed easily thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19200 kg Hodpfxoxw Ecve Adrofh

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel Hfsdjxd S T Uspfx Adreh * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, širina mize: 670 mm, dolžina mize: 950 mm, prebijalna sila: 100 t, prebojna odprtina v mizi: 180 mm, vrtina cilindra: 45 mm, nastavitev hoda: 120 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Presses are mechanical press machines that operate with force generated via an eccentric mechanism, designed for cold forming operations such as punching, cutting, and shaping with dies. Thanks to their high production speed and repeatability, they are efficient and reliable solutions for mass production lines. CRONOSSTECH C-Type Eccentric Press 100 Ton is designed for stable performance in cold forming applications. Featuring a rigid steel frame construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers dependable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES Hjdpfx Adevtx Inorofh • Steel frame construction • Four-sided slideway guides • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts from 4140 tempered steel • Central full automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor movement • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster • Decoiler, feeder, and straightener • One set of dies according to customer specs • 8-sided slideway guides ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between uprights: 420 mm Ram adjustment (shut height): 85 mm Approx. machine width: 1400 mm Approx. machine depth: 1900 mm Approx. machine height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Stroke per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.