3D tiskalnik

Markforged X7

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Markforged Type: X7 Gen 2 3D Printer Gjdsvvlduopfx Afqebg The X7 prints industrial-grade manufacturing fixtures, jaws, tools, jigs, and end-use parts. It is designed for production use and prints parts stronger than machined aluminum, at a fraction of the cost. It combines excellent surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, exclusive to the X7. Technical data: Printer features Process: Fused Filament Fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling – flatness up to 80 μm precise Laser: In-process inspection, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2A peak) RF module: 2.4 GHz Wi-Fi frequency range, 802.11 b/g/n standards Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, fiberglass, aramid fiber (Kevlar®), HSHT fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part characteristics Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill; multiple geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available for extra charge) Security: 2-factor authentication, org admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 Last maintenance in December 2024 Sold from current location Condition: used Scope of delivery: (see pictures) One spool each of Kevlar, fiberglass, and carbon fiber, 11 partially used Onyx filament spools (Subject to change and error in technical data, all details are without obligation!) If you have further questions, we will be happy to answer them by phone.

Stanje: novo, Leto izdelave: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Bruges, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • Left drill bit 5 mm for creating row drill holes • 20 mm drill bit for the installation of Minifix systems • 8 mm milling cutter for limited drilling and milling applications • 35 mm drill bit for hinges • The panel thickness that can be processed is 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis range: - Drilling: 920 mm - Sawing: 860 mm • X-axis support: 3000 mm • Z-axis (panel thickness): 12 mm to 40 mm Godod Hz Niepfx Afqebg • A-axis rotation: 360° • Feed speed: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum drill hole diameters: 3 mm – 35 mm • The saw moves along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 HP, 3x 400V/ 3x 230V • Minimum required extraction capacity: 2300 m³/h

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21450012211002129, Leto izdelave: 2024, obratovalne ure: 2.262 h, gradbena višina: 200 mm, gradbena širina: 270 mm, delovna dolžina: 330 mm, Oprema: CE označba, Skoraj nerabljen razstavni stroj z zelo malo obratovalnimi urami! TEHNIČNI PODATKI Gradbeni volumen: 330 mm x 270 mm x 200 mm Višina sloja: od 50 µm Natančnost X, Y: 150 µm PODROBNOSTI O STROJU Tehnologija: FFF + CFR (Continuous Fiber Reinforcement) Gbedpfexu E Srsx Afqsg Kompatibilni materiali: Onyx, Onyx FR, Onyx ESD, Nylon White, ogljikova vlakna, steklena vlakna, Kevlar, HSHT Obratovalne ure: 2.262 h OPREMA Eiger programska oprema (v oblaku in lokalno) Priključki: Ethernet, Wi-Fi, USB Sušilna škatla za material za varno shranjevanje Krepitev z neprekinjenimi vlakni: ogljikova vlakna, steklena vlakna, Kevlar Zaprt gradbeni prostor za optimalno toplotno stabilnost Visokoločljivostni optični kodirniki Pripravljeno za Blacksmith (samodejna dimenzionalna kalibracija) Certifikati: CE, FCC, UL, UKCA

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Gedpfek Hz Nqsx Afqsbg Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 2008, Biesse Rover A 3.40 FT - NBC 412 Automatische Nesting-Zelle Beschreibung: Rover A 3.40 FT Zentralisiertes automatisches Schmiersystem 8 vordere + 8 hintere Anschläge mit Sensoren 1 rechter Seitenanschlag mit Sensor Vakuumsystem für 2 Pumpen mit je 300 m³/h 12 kW (16,1 PS) Elektrospindel mit ISO 30 Adapter, luftgekühlt Gebläseeinheit Bohrkopf BH 18 A Revolverkettenspanner mit 10 Positionen Numerische Steuerung XP600 BiesseWorks - Advanced – Maschinen- und Büroversion BIESSE NEST Modul Be- und Entladearm, auf dem Maschinenbalken positioniert Be- und Entladetisch, auf der linken Seite des Bearbeitungszentrums platziert CE-Sicherheitseinrichtungen Drehklauen-Vakuumpumpe Mechanischer Anpressring mit pneumatischem Absenken, für Nestinganwendung Godpfswh Sfzox Afqebg (Alle Änderungen, Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, obratovalne ure: 5.610 h, Ponujamo kombajn New Holland - CR980 - žitni kombajn - letnik 2003, delal do konca žetve, v odličnem stanju, po servisu. Vabimo vas na ogled na naši kmetiji blizu Olsztyna. Godpfsxu E Ersx Afqebg - Pozimi garažiran. - Delovne ure mlatišča: 4147 - Delovne ure motorja: 5610 Priporočamo!

Stanje: delavnici obnovljeno (rabljeno), For Sale: EOS P100 – Ready for Immediate Use This EOS P100 has been fully inspected and refurbished, making it ready for immediate deployment in your production environment. Included in the scope of delivery: • 2 build platforms • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Included services: • Transport & Installation: Secure delivery in original EOS packaging as well as professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your specific requirements. Gbjdpfx Aorm Tdwofqsg About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for pre-owned EOS equipment, we stand out for our extensive expertise and unique services. What we offer: • Expert Service: Installation, maintenance, repairs, and upgrades carried out by experienced former EOS technicians. • Exclusive Materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, developed specifically for EOS systems. • Comprehensive Support: From transportation to maintenance plans – we take care of everything. Count on IM3D for reliable machines, premium-quality materials, and the expertise to optimize your SLS production. KNOW WHAT YOU'RE BUYING! Completely refurbished and with warranty! Feel free to contact us for further information or inquiries!

Stanje: generalkompletno obnovljen (rabljeno), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measurement uncertainty 4.0 + 4.5L/1000 (in original condition, currently significantly improved after modernization) Fully modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Completely new software: Inca Premium (other software options available upon request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Gbsdpfx Afsdpak Rsqeg Probe changer Rotary table, etc.

Stanje: rabljeno, Leto izdelave: 2019, Suitable for the generative manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel. Accessories: - Full enclosure - rePLUG "Standard" powder unit for powder supply and feed, extraction of metal powders from the process chamber, and automatic sieving - CELOS for LASERTEC SLM - al-deco-STD fire extinguishing system – extinguishing unit: 5-liter argon cylinder - CELOS App II OPTOMET (Basic) software package for automatic pre-calculation and optimization of process parameters for selected materials Maximum travel X-axis: 325 mm Maximum travel Y-axis: 325 mm Gsdpfxewhiycs Afqobg Maximum travel Z-axis: 400 mm Build volume: 300 x 300 x 300 mm³ Layer thickness: 20 – 100 µm Laser type: Ytterbium laser Maximum laser power: 400 W Minimum focus diameter: 35 µm Tank volume: 50 dm³ Connection rating: approx. 400 V / 50 Hz Weight: approx. 1200 kg Colour: Light grey, dark grey, red

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Smooth G control system Travel paths: X1/X2 axes: 207 / 141 mm Y1/Y2 axes: 100 / 70 mm Z1/Z2 axes: 760 / 815 mm W axis: 865 mm Max. swing diameter: 370 mm Gbedpjmhihhofx Afqeg Max. turning diameter: 344 mm Main spindle: 26 kW, A2-8 spindle nose Main spindle max. speed: 4,000 rpm Main spindle max. bar capacity: 80 mm Sub-spindle: 22 kW Sub-spindle max. speed: 5,000 rpm C-axis sub-spindle, 0.0001° 2 units, 12-position turrets with 12 live tool stations each Live tools: 11 kW, max. speed 6,000 rpm Prepared for 10" chuck on main spindle Prepared for 8" chuck on sub-spindle Finished part gripper including conveyor belt Main spindle air blast Air blast for main and sub-spindle transfer Upper and lower turret air blast Coolant through sub-spindle Overload monitoring Extended program memory 8 MB Cylindrical interpolation Drilling cycle with torque-dependent chip breaking 2 x high-pressure pumps, 70 bar Oil mist extraction Chip conveyor with drum filter, Cromar Series III Bar feeder Hydrafeed Multiservo MSV80 Finished parts station: Rota-Rack Parts Accumulator