Kellenberg nakup rabljenega (109)

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Bodpfovdk N Eex Abhecu Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: Bodpfjuxfucex Abhecu - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools Bjdpfx Aouxfupsbhjcu - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment Bcsdpfet Ii Nbex Abhju - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Bcjdpfxot Ii Nue Abheu Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – cantilevered: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a world-leading company in the field of Kellenberger – overhaul / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines. Machine geometrically overhauled and repainted with original electrics. Photo shows a recently delivered 600U. -Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increase of centre height to max. 225mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently fulfil the basic safety and protection requirements as specified in BetrSichV 2015. The required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Bcjdpfxst Ii Rfs Abhju Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Grinding diameter: 250 mm Grinding length: 600 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: +/- 360° Grinding headstock swivelling: +/- 0° Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Bcodpfx Abjd Ih Ehehsu Table swivelling: +/- 10° Table longitudinal travel: 700 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported incl. clamping): 130 kg Cross travel: 270 mm Tailstock quill taper: MT3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a world-leading company in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition with warranty but can also offer comprehensive service for your machines. Overhauled to Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows an already delivered machine. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are almost identical to the original control, so no retraining is necessary. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be upgraded or modified to customer requirements. - Workpiece spindle can be stopped in an oriented position upon request. - Maximum infeed can be increased to 40 mm on customer request. - Digital display in 2 axes. Resolution X-axis: 0.5 µm Options: - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (no vertical adjustment possible with spindle) - New, stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase centre height up to max. 225 mm - Variable speed control for the grinding spindle Including: - New DGS paper band filter - Operating tools - Clamping tube for chuck Further accessories available on request. The machine is equipped on the X-axis with an electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal and rapid traverse feed. Versatile use in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. A risk assessment as per BetrSichV must be carried out to determine the necessary minimum safety measures.

Stanje: generalkompletno obnovljen (rabljeno), Kellenberger univerzalni notranji in zunanji okrogel brusilni stroj Kellenberger 1500 U - 175 (vključno z notranjo brusilno napravo) Razdalja med centri: 1500 mm - Višina konic: 175 mm Bcedpfxswqlyke Abhsu Siemens servomotor. Frekvenčni pretvornik notranji & zunanji, WSS Dobavljivo z različnimi dodatki. Razpoložljivost: takoj! Možnost 1000U: v postopku prenove.

Stanje: pripravljen za uporabo (rabljen), An older Kellenberger precision cylindrical grinding machine, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, max. workpiece weight: 3 kg, max. workpiece diameter: 245 mm, max. workpiece length: 130 mm. An on-site inspection is possible. Bedpfx Abew Edpgshjcu

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 125 mm - Table swivel range: -/+ 8° - Universal grinding wheelhead - Left grinding wheel dimensions: 400 x 50 x 127 mm - Main motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead swivel range: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead swivel range: 180° - Workhead spindle speed: 20 - 400 rpm - Workhead internal taper: Morse 5 - Workhead motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions (L x W x H): 2860 x 1680 x 1670 mm - Weight: 2500 kg EQUIPMENT - Automatic cycle (roughing, finishing, and return) - Counter-center - Sine bar for workhead - Headstock UR: 2 external and 1 internal grinding wheel - Coolant tank with pump - 1 internal grinding spindle SFJ UJ70: 14,000 rpm - Fixed diamond dresser on tailstock - 1 four-jaw chuck - 1 magnetic chuck - 1 set of drive dogs - 2 two-position steadies - Spacer for 175 mm height Bjdjuhbx Topfx Abhjcu - Various grinding wheel adapters - Various grinding wheels

Stanje: dober (rabljeno), valjčni brusilni stroj Bedpfjtrgukex Abhjcu

Stanje: dober (rabljeno), Distance between centers: 1000 mm Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (OD x ID x width): 500 x 80 x 203.2 mm Max. workpiece diameter: 460 mm Tailstock taper: MORSE 4 Workhead spindle taper: MORSE 5 Max. Z-axis travel: 1115 mm Max. X-axis travel: 260 mm Approx. dimensions (L x W): 440 x 370 cm Bedpfx Abstrgnzehscu Approx. weight: 4700 kg

Leto izdelave: 1979, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Centre height: 125 mm + heights of 50 mm Bsdpjk H Hp Njfx Abhscu Distance between centres: 1,000 mm Grinding wheel › Diameter: 400 mm › Width: 50 mm › Bore: 127.0 mm Swivel angle: 270° Workpiece spindle head speed: 20 – 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel angle: 8° Table speed: stepless up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY • Machine has been completely retrofitted • New control cabinet & new circuit diagram • New motor & frequency converter for the workhead • 2-axis DRO • Coolant tank with paper filtration • Geometry manufactured according to Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection report for further information on the machine.

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno), On behalf of a customer from Switzerland, I am offering this machine for sale. It is in excellent condition with 5,200 operating hours. Used in prototype construction, currently operational. Equipped with: - Grinding head UR - T1 500 x 80; T2 400 x 63 - 1 HF internal spindle MFM 1224/42 - 1 HF internal spindle MFM 1290 - Semi-automatic balancing system - KEL-TOUCH on the workpiece headstock for internal and external grinding - KELSET grinding wheel measurement - KELPOS longitudinal positioning - Heidenhain CNC GrindPlus 640 - CNC B-axis, hydrostatic Bsdpfx Abjgtingjhocu - CNC C-axis for polygon and thread grinding - KELSOFT NCG for non-circular grinding - KELTHREAD for thread grinding - KELREMOTE for remote diagnostics - Prepared for measuring controls - Streuli 480 l paper band filter - Extraction unit Available at short notice from location Switzerland.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 200 mm, višina središča: 200 mm, teža obdelovanca (maks.): 100 kg, dolžina brušenja: 1.000 mm, teža obdelovanca med konicami: 100 g, premer obdelovanca med konicama: 400 mm, I am offering this machine here on behalf of a customer in an almost as-new condition. Currently still under power. It is equipped with the following options: Glass linear scales in X and Z Electric door drive Integrated wheel change assistant Fanuc 0i TF Blue Solution HMI Back Solution Basic Black CAM Profile Security Interface Remote diagnostics via mobile network (4G) Bedpsw Ed D Rsfx Abhscu Grinding head with automatic 1-degree indexing Grinding head UR 1 - 2 - 3 (prepared for HF internal grinding spindle) T 1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning on the head Semi-automatic balancing GAP control A brochure for the K 10 can be provided upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina središča: 175 mm, teža obdelovanca (maks.): 180 kg, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, skupna dolžina: 1.150 mm, premer brušenja: 349 mm, The machine is operational and in use at our facility. It is equipped with 2 external diameter and 2 internal grinding units, featuring a C-axis. Bsdpfxsv Uxrio Abhjcu

Stanje: rabljeno, Abstand zwischen den Spitzen: 1000 mm Spitzenhöhe: 250 mm B-Achse: Genauigkeit 0,1" CNC Marke: Kelco CNC Modell: 90 Abmessungen linke Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 63 mm Abmessungen rechte Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 50 mm Werkstückspindel Schwenkbereich: -30º bis +120º Spitzenaufnahme Werkstückspindel: MK 5 Max. Werkstückgewicht zwischen Spitzen: 150 kg Reitstockaufnahme: MK 4 Reitstockpinolenhub: 50 mm Max. Umfangsgeschwindigkeit: 32 m/s Hochfrequenz-Innenschleifspindel: Ø120 mm Marke der Hochfrequenz-Innenschleifspindel: WARNER Modell K 3.000 Hauptantriebsleistung: 7,5 kW Gesamtleistung: 26,5 kW Max. Verfahrweg Z-Achse: 1.150 mm Max. Vorschubgeschwindigkeit Z-Achse: 15 m/min Bodpfoxmg Eksx Abhscu Drehtischbereich: 0º bis 9º Max. Verfahrweg X-Achse: 320 mm Max. Vorschubgeschwindigkeit X-Achse: 7,5 m/min Länge: 3.600 mm Breite: 2.000 mm Gewicht ca.: 5.000 kg

Stanje: rabljeno, središčna višina pri ročični gredi: 125 mm, premer obdelovanca med konicama: 1.300 mm, vrtilni razpon: 9 °, Cilindrični brusilni stroj Kellenberger 51 HU Višina središča: 125 mm Razdalja med konicami: 1200 mm Površina delovne mize: 1590 x 140 mm Brusna površina: 1300 x 200 mm Preklopna pot mize, ročno in avtomatsko: 1300 mm Zasuk mize: 9° Glava držala: Hitrosti, 5 stopenj: 50–400 vrt/min Vrtenje: 360° Notranji stožec: MT5 Kontra držalo: Notranji stožec: MT3 Hod tulec: 18 mm Brusilna glava: Prečni pomik: 320 mm Vrtenje: 360° Hitrost vretena, 3 stopnje: 2000, 2400 in 3650 vrt/min Brusni kolut: 300 x 25 x 127 mm Motor: 3,5 HP Vgrajen nastavek za notranje brušenje: Hitrost vretena: 14.000 vrt/min Bcsdpfx Abjxpif Eehou Teža stroja: 1950 kg Povprašajte za ponudbo s prevozom!

Stanje: dober (rabljeno), Razdalja med konicami: 1000 mm Višina konic: 175 mm Blagovna znamka CNC: FANUC Bsdpfx Abjtrgn Tjhjcu Model CNC: Oi-TD

Stanje: dober (rabljeno), Distance between centers: 760 mm Maximum Z-axis travel: 650 mm Maximum workpiece length: 430 mm Maximum workpiece diameter: 250 mm Center height: 125 mm Maximum grinding wheel diameter: 500 mm Maximum X-axis travel: 320 mm CNC brand: FANUC CNC model: 18TB Main motor power: 7.5 kW Z and X-axis resolution: 0.1 µm Workhead spindle taper: MORSE 5 Workhead spindle bore diameter: 38 mm Tailstock taper: MORSE 4 Bodov Tmtlspfx Abhscu Workhead spindle speed range: 8 to 800 rpm Dimensions (length x width): 2500 x 2000 mm Weight: 4700 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Krmilna enota Znamka: FANUC Model: §==I Glavni pogon Število osi: 5 Bcsdpfx Absx D Ny Sjheu Miza Število T-utorov: 7 Notranja širina: 14 mm Obremenitev mize: 800 kg Ta 5-osni stroj HAUSER KELLENBERGER H55-400 je bil izdelan leta 2019 in je zasnovan za natančno notranje brušenje. Idealen za kompleksne geometrije, ponuja napredno upravljanje za visoko natančnost. Razmislite o nakupu notranjega brusilnega stroja HAUSER KELLENBERGER H55-400. Kontaktirajte nas za več informacij. Področja uporabe Brušenje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik po osi Z: 130 mm, skupna višina: 2.750 mm, hitrost pomika os X: 1 m/min, hitrost podajanja osi Y: 1 m/min, hitrost podajanja os Z: 12 m/min, širina mize: 630 mm, dolžina mize: 770 mm, razdalja od mize do središča vretena: 585 mm, vrsta vhodnega toka: trifazni, obremenitev mize: 500 kg, skupna masa: 4.500 kg, pomik osi W: 500 mm, razdalja med stojali: 750 mm, Oprema: dokumentacija / priročnik, CNC koordinatni brusilni stroj HAUSER S40-400 TEHNIČNE ZNAČILNOSTI: Pomik X osi: 650 [mm] Največja hitrost pomika X osi: 4000 [mm/min] Delovni pomik X osi: 0 - 1800 [mm/min] Pomik Y osi: 450 [mm] Delovni pomik Y osi: 0 - 1800 [mm/min] Pomik Z osi: 130 [mm] Bodsya Dz Ropfx Abhocu Minimalna hitrost pomika Z osi: 0,5 [mm/min] Maksimalna hitrost pomika Z osi: 12000 [mm/min] Frekvenca pomika Z osi: maks. 4 [Hz] Pomik W osi: 500 [mm] Hitrost planetarnega vrtenja C osi: 5 - 250 [obr/min] Največja hitrost pomika W osi: 800 [mm/min] Pomik U osi (radialni pomik): 5,5 [mm] Razdalja med stebri: 750 [mm] Dolžina mize: 770 [mm] Širina mize: 630 [mm] Odmik med brusilnim motorjem in mizo: 585 [mm] Največja obremenitev mize: 500 [kg] Napajalna napetost: 400 [V] Teža: 4550 [kg] DODATNE INFORMACIJE: x1 HI-CUT paket, vključno z: -zaščito delovnega območja -odsesovalni sistem z elektrostatičnim zračnim filtrom -sistem protipožarne zaščite (potrebna presoja pooblaščenega organa) -HTG-RWS-60 avtomatska hladilna enota s pasovim filtrom x1 naprava MSS (Multi-Sensoric System) za zaznavanje orodja x1 enota za obdelavo CBN s HF pogonom za avtomatsko dresiranje CBN brusnih kol (keramična in sintetična vezava) x1 brusilna turbina T16 - hitrost: 160.000 obr/min - referenca: 164225 x1 nosilec turbine s filtrom za uporabo s turbinama T10 in T16 - referenca: 166497 x1 brusilni motor 60S-TC, hitrost 9000 - 60000 [obr/min], za vpenjalne tulec SK20 - številka dela: 208450 x1 vmesna plošča za poravnavo motorjev in turbin - referenca: 192940 x1 nosilec centrirne ure za rotorje brusilnega motorja - referenca: 191790 x15 čeljusti za nosilec brusnih kol x1 kabel za brusilni motor Razno orodje Popolna dokumentacija Stroj je mogoče videti v obratovanju po predhodnem dogovoru. Cena po dogovoru, nakladanje na tovornjak vključeno. Možnost dostave po vsem svetu. Podatki na tej strani so pridobljeni po naših najboljših močeh. Zato točnost informacij ni zagotovljena. HAUSER S40-400 je visokoprecizni CNC koordinatni brusilni stroj. Namenjen je za delo v zahtevnih tolerancah, kot so konturiranja v letalski, avtomobilski in medicinski industriji. Zaradi robustne konstrukcije in naprednih funkcij je HAUSER S40-400 primerljiv z napravami priznanih proizvajalcev kot je Moore. Možno ga je vključiti v delavnice, kjer se uporabljajo stroji Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman in ELB. Poleg zmogljivosti se HAUSER S40-400 odlično integrira tudi v delavnice opremljene s stružnicami, obdelovalnimi centri ali CNC rezkalnimi stroji ter ponuja celovito rešitev za visokoprecizno brušenje in obdelavo kompleksnih delov.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik po osi Z: 130 mm, hitrost pomika os X: 1 m/min, hitrost podajanja osi Y: 1 m/min, hitrost podajanja os Z: 12 m/min, dolžina mize: 770 mm, razdalja od mize do središča vretena: 585 mm, vrsta vhodnega toka: trifazni, obremenitev mize: 500 kg, skupna masa: 4.550 kg, pomik osi W: 500 mm, razdalja med stojali: 750 mm, razmak između stupova: 750 mm, Oprema: dokumentacija / priročnik, CNC Koordinatenschleifmaschine HAUSER S 40 400 TECHNISCHE DATEN: Verfahrweg X-Achse: 650 mm Max. Verfahrgeschwindigkeit X-Achse: 4.000 mm/min Arbeitsvorschub X-Achse: 0 – 1.800 mm/min Verfahrweg Y-Achse: 450 mm Arbeitsvorschub Y-Achse: 0 – 1.800 mm/min Verfahrweg Z-Achse: 130 mm Min. Verfahrgeschwindigkeit Z-Achse: 0,5 mm/min Max. Verfahrgeschwindigkeit Z-Achse: 12.000 mm/min Hubfrequenz Z-Achse: max. 4 Hz Verfahrweg W-Achse: 500 mm Planetenumdrehung C-Achse: 5 – 250 U/min Max. Verfahrgeschwindigkeit W-Achse: 800 mm/min Verfahrweg U-Achse (radialer Vorschub): 5,5 mm Säulenabstand: 750 mm Tischlänge: 770 mm Tischbreite: 630 mm Abstand zwischen Schleifspindel und Tisch: 585 mm Max. Tischbelastung: 500 kg Versorgungsspannung: 400 V Gesamtgewicht: 4.550 kg Bcodpfx Ajya Az Njbhsu MITGELIEFERTE AUSSTATTUNG: 1x HI-CUT Paket bestehend aus: - Arbeitsraumabdeckung - Absauganlage mit elektrostatischem Luftfilter - Brandschutzsystem (Beurteilung durch zertifizierte Fachstelle erforderlich) - Automatische Papierbandfilteranlage 1x Schleifmotor 22 S, Drehzahl 4.500 – 22.500 U/min, für EX23-Spannzangen – Artikelnummer: 181561 1x Schleifmotor 45 S, Drehzahl 9.000 – 45.000 U/min, für EX19-Spannzangen – Referenz: 144017 1x Schleifmotor 80 S, Drehzahl 40.000 – 80.000 U/min, für F6-Spannzangen – Referenz: 144021 1x Schleifmotor für Nutenschleifen (inkl. Motor + Riemen) – Referenz: 144022 3x Schleifwerkzeuge für Nutenschleifer 1x Satz Riemen für Nutenschleifmotor 1x Zwischenplatte zur Ausrichtung der Schleifmotoren – Referenz: 192940 1x stufenlos einstellbare Auslegerplatte mit montiertem Schleifmotor zum Schleifen bis Ø360 mm – Referenz: 144023 1x verstellbare Platte zum Schwenken von Schleifmotoren und Turbinen (bis 16°) – Referenz: 126148 1x 2er-Set HAUSER 90°-Winkel – Referenz: 155361 1x Zentriermikroskop – Referenz: 146318 1x Werkzeug-Kontakterkennung – Referenz: 162334 20x Schleifscheibenaufnahmen 1x Kabel für Schleifmotor Diverse Werkzeuge Komplette Dokumentation Die Maschine kann nach Terminabsprache unter Strom besichtigt werden. Preis auf Anfrage, Verladung auf LKW inbegriffen. Weltweiter Versand möglich. Die Angaben auf dieser Seite wurden nach bestem Wissen und Gewissen gemacht, für deren Richtigkeit wird jedoch keine Gewähr übernommen. Die HAUSER S40-400 ist eine hochpräzise CNC-Koordinatenschleifmaschine. Sie eignet sich hervorragend für Anwendungen mit engen Toleranzen, z.B. für Konturbearbeitungen in der Luft- und Raumfahrt, Automobil- und Medizintechnik. Dank ihrer robusten Konstruktion und den modernen Funktionen ist die HAUSER S40-400 mit Maschinen namhafter Hersteller wie Moore vergleichbar. Sie lässt sich optimal in Werkstätten mit Maschinen von Mägerle, Studer, Moore, Kellenberger, Okamoto, Jones & Shipman und ELB integrieren. Neben ihrer Leistungsfähigkeit integriert sich die HAUSER S40-400 nahtlos in Werkstätten mit Drehmaschinen, Bearbeitungszentren oder CNC-Fräsmaschinen und bietet eine umfassende Lösung für hochpräzises Schleifen und die Bearbeitung komplexer Werkstücke.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 650 mm Maximum grindable workpiece diameter: 360 mm Maximum load, cantilevered: 1000 N / 100 kg Maximum load between centres: 3000 N / 300 kg Z-Axis Table swivel range: 10° Table drive, hydraulic: 0–4 m/min Bcodpfx Abstqf Sqohsu X-Axis Infeed spindle stroke: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid speed: 48 mm/min/Ø Infeed cycles: Plunge cut, longitudinal grinding 4 preselectable speeds: mm/min/Ø 0.01–48 4 preselectable infeed increments: mm 0.001–0.1 Outfeed during shoulder grinding: s 0–99; 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle head: universal, swiveling: ° 0–180 Grinding wheel (external): D x b x d mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece spindle head: Infinitely variable drive: Mk 4 1/min 30–270 / 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swiveling on turning part: ° 0–90 Tailstock: Quill mount/quill diameter: mm MK4/750 Quill stroke: mm 45 Quill force: N 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 µm Connections: Total machine connected load: kW 6.5–10 Grinding spindle head: kW 5.5 (7.5) Workpiece spindle head: kW 0.55 (1.1) Coolant purification: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: L 80 Pneumatics: bar 6 Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Bcedpfjiv Au Eox Abheu Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm Quill force: 200–600 N manual (up to 2500 N possible, adjustable as an option) Table swiveling: 10 degrees Cross slide travel: 80 mm Rapid traverse: 50 mm Air cushion fine adjustment: 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 liters Machine weight: net 3800 kg Infeed drive via DC motor Air-cushion supported rapid adjustment of the grinding spindle headstock for fast and safe positioning to the grinding position. Separate drive for external and internal spindle grinding. Fully automatic operation cycle, infeed motion controlled via rotary switch: Rapid advance, rapid return, grinding operation, infeed stop, micron infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding positions Workpiece headstock with infinitely variable drive for live and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, programmable return, feed amounts, feed rates, spark-out times, idle strokes, compatible with old Karstens infeed control, with coloured Siemens touch panel, position measuring in X and Z axes by HEIDENHAIN. Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna