Keg Turners nakup rabljenega (505)

Stanje: rabljeno, Plate turning device for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. Nwedpfx Ahjrzhfas Iod * Maximum panel length: 3200 mm. * Rotation system: double cone. * Rotation direction: from longitudinal to transverse. This device is commonly used in the woodworking and furniture industries to facilitate the handling of panels during processing. If you have any further questions or require additional information, please do not hesitate to contact us!

Stanje: rabljeno, Plate turning device for loading and unloading panels. Working dimensions: Nedorzhfdjpfx Ah Iswd * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Rotation direction: from crosswise to lengthwise. This device is commonly used in the woodworking and furniture industry to facilitate the movement of panels during processing. If you have any further questions or require additional information, please do not hesitate to contact us!

Stanje: rabljeno, Plate turning device for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm * Maximum panel length: 3200 mm * Rotation system: double-cone * Rotation direction: from longitudinal to transverse Nwedperzhflofx Ah Isd This device is frequently used in the woodworking and furniture industries to facilitate the handling of panels during processing. If you have any further questions or require additional information, please do not hesitate to contact us!

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: Wey Converting (Nemčija) Obračevalec zvitkov, malo rabljen (le ca. 100–200 ur) Nwodpfxow I R Iyo Ah Iod Leto izdelave: 2015, dobro stanje Tip: Wematell 2100 KIP Za jumbo/navitke do 2100 mm. Minimalna širina: 920 mm Hidravlični postopek nagibanja/obračanja Trenutno demontiran Vključno s popolno dokumentacijo Maksimalna teža zvitka: 3000 kg

Leto izdelave: 2014, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 714_0917, Robotic palletising system for KEG barrels – for both palletising and depalletising operations. Performance: Up to 120 cycles per hour for palletising and depalletising. These systems have been operating successfully for several years. Our KEG gripper can handle KEGs from 300-450 mm (adjustable), including disposable barrels. The system features a safety enclosure and access control with a light curtain. Control is via Siemens S7 PLC with TIA Portal. Nsdpfx Asg N S Edsh Iewd Required footprint: approx. 4500 x 3500 mm. Optional add-ons available: inline KEG scale, pallet labeller, and automatic cap placement. We are happy to integrate your existing components into our system. We offer full expertise! References from multiple years available. We provide after-sales service as well. Rapid implementation possible – assembly, integration, and commissioning all from a single source.

Stanje: rabljeno, Linomat LN2 Washer with Filler, 2 active cleaning heads, fully automatic, fully electronic KEG internal cleaning and filling machine, suitable for various KEG sizes 15–50 L, for 20-liter containers – capacity 35–40 containers/hour. The KEG system operates with Slim KEG basket fittings. Built in 1992, very good condition, inspected and tested for functionality by Seegräber GmbH. Nodpjxytvpofx Ah Iowd

Leto izdelave: 2016, obratovalne ure: 340 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen,

Stanje: rabljeno, Leto izdelave: 2020, Pallet Turner Busch SWH 90 RLA Year of manufacture: 2020 Description: Nwodpfxouv Huls Ah Iod - Air loosening - Shaking - Aligning Max. sheet size: 600 x 750 mm

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 1.000 h, Self-propelled triangular windrow turner for processing organic waste such as green waste, biowaste, or microbiologically contaminated soils. JT630 semi-autonomous - Windrow width up to 6.30 m - Windrow height up to 2.9 m - Radio-controlled with semi-autonomous functions - Up to 25% fuel savings - Easy to transport and quick to deploy - Comfort cabin (optional) Nwodpfsizku Ejx Ah Iod

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Rabljeno stanje. Nwodpfexbpxiex Ah Ijd

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Pallet changers and pallet inverters are used to transfer goods between different types of pallets. Goods can be transferred from wooden to plastic pallets, from euro pallets to CHEP pallets, or from euro pallets to Düsseldorf pallets. All types of loads can be transferred, for example, bags, big bags, cardboard boxes, bottles, etc. Nwsdjhkzuiopfx Ah Ied Capacity 1500 kg Max opening 2200 mm Min opening 820 mm Platform 1200 x 1200 mm Power supply 400 V Three Phase ‐ 5.5 kW Rotation movement Hydraulic Control Via push buttons Cycle rate 20 pallets / hour Loading and unloading at ground level using pallet truck

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Pallet exchanger, pallet inverters Pallet inverters allow for easy exchange of pallets underneath goods. For example, transferring goods from wooden to plastic pallets, or vice versa. They enable the replacement of damaged or broken pallets under goods without the need to completely unload the cargo by hand. Nodpfxsgyk Uhe Ah Iowd

Stanje: novo, Leto izdelave: 2023, Tipping device suitable for installation in various types of facilities. Designed to turn large and heavy parts. Nsdpfsr Hbu Eox Ah Iowd

Stanje: pripravljen za uporabo (rabljen), Dovodna linija za hlode Tähkä, opremljena s spodnjo napravo za obračanje hlodov Nsdpexg Rvgefx Ah Iswd

Stanje: rabljeno, Premier Pallet Inverter / Turner Modell FS1600 Maximale Öffnung: 1575 mm, Minimale Öffnung: 900 mm Maximale Tragfähigkeit: 7.000 kg Lasttischmaße: 1300 mm x 1250 mm Nwjdpfx Ahjwkhnqj Isd Zykluszeit: 45 Sekunden Zum Wenden von Kartons, Säcken, Fässern, Eimern, Dosen, Glasfläschchen, Blech und Kunststoff, Toiletten, Gaszylindern, Big Bags und Gitterboxen geeignet Bewältigt nahezu jede palettierte Ladung, einschließlich rutschiger oder instabiler Güter dank hoher Klemmkraft Bergung beschädigter Materialien vom Ladungsboden Austausch von Holzpaletten gegen Kunststoff-, Aluminium- oder andere hygienische Paletten Umsetzen von Materialien von beschädigten Paletten Ausrichtungswechsel für Druck- und allgemeine Anwendungen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Premier Pallet Inverter / Obračalnik palet Leto izdelave: 2018 Elektrohidravlično upravljanje Največja odprtina: 1875 mm Najmanjša odprtina: 1050 mm Nosilnost: 2000 kg Zaščitna ograja vključena Primarne uporabe obračalnika palet FS 1900: Obračanje škatel, vreč, sodov, kant, pločevink, stekleničk, pločevinastih in plastičnih materialov, WC školjk, plinskih jeklenk, big bag vreč (super vreč) in gaylord škatel. Naprava zanesljivo obrača skoraj vse vrste paletiziranega tovora, tudi spolzko ali nestabilno blago, zahvaljujoč visokemu pritisku vpenjanja. Nodpfxowt S N Ro Ah Iewd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K-89404748-10327777, vrsta vhodnega toka: trifazni, skupna širina: 2.134 mm, skupna dolžina: 4.268 mm, skupna višina: 2.750 mm, vhodna napetost: 460 V, vhodna frekvenca: 60 Hz, 3-fazni, 460 V (5) pralnih ventilov, (1) polnilna glava Kapaciteta: 30–90 sodov/uro (časi čiščenja in polnjenja za 15,5 gal: 2 min) Združljive velikosti sodov: 7 L do 58 L (239 mm do 425 mm premer x 320 mm do 610 mm višina) Prav tako združljivo za uporabo z enkratnimi Petainer sodi Natančnost polnjenja: +/- 0,19 % Integrirano zunanje in notranje pranje, polnjenje, avtomatsko postavljanje, nadzor in izhodni transportni trak z drsnikom Demontaža potrebna v Michiganu, ZDA. Za več informacij nas kontaktirajte! Nwedpfx Ahjv Ncmyj Iod

Stanje: dober (rabljeno), Leto izdelave: 1978, Pitch Circle Diameter max 152 mm Number of Teeth 8-50 Weight 7,500 kg Technical Data – Min./max. root cone angle: 15° / 55° – Pitch circle Ø: 152 mm – Max. tooth height with 21° finishing cutter head: 10.7 mm – Max. tooth width at the tooth root at 21°: 28 mm – Cutter head Ø: 200 mm – Range of number of teeth: 8–50 – Max. cutter head Ø: .21" Workpiece Spindle – Diameter of tapered bore at the large end: 99.219 mm – Chucking length at 304.8 mm length: 15.478 mm – Taper depth: 15.875 mm – Diameter of entire spindle bore: 22.225 mm The GLEASON 726 REVACYCLE bevel gear milling machine machines workpieces with the highest precision and accuracy. The root angle can range from 15° to 55°, and the bevel gear is machined at a high speed of 49.7 m/min. The GLEASON NO 726 machine weighs approximately 9 tonnes. Technical Data of the GLEASON 726 REVACYCLE Bevel Gear Milling Machine Maximum tooth height: 14.8 mm Maximum tooth width at root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Cutter head speed: 32.6-49.7 m/min Feed rates (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of the tapered bore at the large end: 99 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Counterbore behind the taper: 57.2 x 77.9 mm Diameter of bore through spindle: 22.3 mm Main drive motor power: 10 HP Main drive motor speed (60 Hz/50 Hz): 1800/1500 rpm Hydraulic motor speed (60 Hz/50 Hz): 1800/1500 rpm Njdexq Hgcepfx Ah Ijwd Coolant pump speed (60 Hz/50 Hz): 3600/3000 rpm Chip auger motor speed (60 Hz/50 Hz): 1800/1500 rpm Space requirement (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Leto izdelave: 1979, stanje: rabljeno, Diatomaceous Earth and Sheet Filter. Sterilizable universal filter for liquid filtration using diatomaceous earth and sterilizing filter sheets. Stationary sheet filter with square filter elements in vertical row arrangement, hydraulic compression of filter sheets. Hydraulic controls operated from integrated electric control panel. Machine (additional): Diatomaceous earth and sheet filter as a combination unit; year of manufacture: 1979–2010 Capacity approx.: 380 hl/h combination filter – Filter area approx. 76–108 m² DE; 18 m² sheet area when filtering beer Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10,100 mm Width: 1,320 mm Height: 1,750 mm Formats: Square filter elements Element layout: Vertical row arrangement of filter elements Operation / control: Integrated electric control panel Material: Stainless steel Orientation / position: Horizontal Nedpevcqn Ssfx Ah Iswd Base construction: Frame Equipment: Filter plates; filter frames; diverter chamber; collection tray with discharge screw; hydraulic filter sheet compression; hose pump

Leto izdelave: 1975, stanje: rabljeno, Stationary sheet filter with square filter elements arranged vertically in rows. Machine (additional info): Sterilizing filter Nedpfxjvcqzlo Ah Ijwd Capacity: 140 hl/h Number of plates: 119 plates Length: 7,500 mm Width: 1,600 mm Height: 2,000 mm Formats: Square filter elements – 100 cm x 100 cm Layer configuration: Vertical row arrangement of filter elements

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Nwodpfx Ahsytcf Us Isd Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. *

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Proizvajalec: Kegel Model: Aj bs Opis: Pakirni stroj KEGEL AJ BS Proizvajalec: KEGEL AJ Model/tip stroja: BS Leto izdelave: 2013 Nwjdpfx Ahoyvku De Iod Kategorija stroja: Pakirni stroj Lokacija: Gorzów Wlkp. Dobavni pogoji: LASTNI RAČUN Stroški dostave: Na stroške stranke Način zagona: Brez vtftjd3 Po dogovoru Opombe: VALJČNIK ZA FOLIJO Leto: 2013

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 2.700 kg, dovoljena osna obremenitev (os 1): 1.350 kg, dovoljena osna obremenitev (os 2): 1.350 kg, zavoro prikolice: prikolica s zavoro, Mere: ca. 420 x 180 x 220 cm Skupna dolžina: 570 cm Priklopnik je takoj pripravljen za uporabo in deluje mirno ter zanesljivo. Tehnični podatki: • Proizvajalec: Böckmann Fahrzeugwerke GmbH • Model: CHF 613/20 • Skupna masa: 2.700 kg • Osovine: 2 × 1.350 kg (dvojna os) • Zavorni sistem: inercijska zavora (Knott KFZ 27) • Priključek: 13-polni • Podporno kolo: prisotno, deluje Oprema & poudarki: • Stabilna ponjava – vremensko odporna, v dobrem stanju • Izjemno robustna Böckmann težka konstrukcija • Dvojna os = stabilna in varna vožnja • Veliko pritrdilnih točk • Takoj pripravljen za uporabo Stanje: Njdpfx Aoyvy Aqoh Ijwd Priklopnik je rabljen, vendar tehnično zanesljiv. Ponjava čista in napeta, elektrika deluje, okvir je trden. Običajne sledi uporabe na kovini (glej slike).

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, upogibna sila (maks.): 1.000 t, hod: 200 mm, obratovalna hitrost: 50 mm/s, hitrost vzvratne vožnje: 180 mm/s, skupna masa: 8.000 kg, skupna dolžina: 3.915 mm, skupna širina: 1.605 mm, skupna višina: 2.655 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, trajanje garancije: 24 meseci, Kot upogiba (maks.): 90 °, dolžina mize: 3.200 mm, delovna višina: 450 mm, All-električni servo upogibni stroj Nazivna sila (kN): 1000 Hod drsnika (mm): 200 Globina grla (mm): 360 X-osni pomik (mm): 600 R-osni pomik (mm): 200 Z-osni pomik (mm): 2500 🔹 Pametni CNC sistem – SL100-P z naprednimi algoritmi in 12-palčnim zaslonom na dotik za intuitivno upravljanje. 🔹 Visokonatančna konstrukcija – Preračunana s pomočjo metode končnih elementov (FEA), žarjena in enkratno strojno obdelana za dolgoročno stabilnost in natančnost. 🔹 4-osni inteligentni odrivnik materiala (backgauge) – Pogon z AC servomotorji, hitra pozicioniranja z avtomatskim preprečevanjem trkov. 🔹 Sistem za kompenzacijo natančnosti – Nastavljive konveksne letve in fina nastavitev za optimalno natančnost upogibanja. 🔹 Zmogljiv in vzdržljiv pogon – Visokonavorni servomotor, robustni krogelni vijaki in zaščita za dolgo življenjsko dobo. 🔹 Popolnoma zaprto povratno vodenje – Magnetno merjenje Y1/Y2, natančnost pozicioniranja ±5μm. 🔹 Optimiziran električni sistem – Zaprt električni omarica, učinkovito odvajanje toplote in urejena napeljava za zanesljivost in enostavno vzdrževanje. Nwedsv Hchlspfx Ah Isd 🔹 Uvožene precizne komponente – Krogelni vijaki in linearna vodila zagotavljajo natančnost brez kompenzacije hoda. 🔹 Visoka natančnost, stabilnost in pametna avtomatizacija – zasnovano za profesionalno upogibanje pločevine!

Stanje: rabljeno, Technical Details: X-travel: approx. 1000 mm y-travel: 400 mm z-travel: 420 mm Control: Siemens Sinumerik 805/810 Thread cutting up to max.: M 22 Drilling capacity in St 60 - through drilling: 25 mm Milling range: performance in St 60: 150 mm Saw stroke: approx. 55 mm Spindle speed range - stepless: 20-6000 rpm Operating hours: manual 26,180 h Tool turret: 12 stations Tool holder: SK 40 Total power requirement: 18 kVA Machine weight approx.: 5.0 t Machine dimensions LxWxH: 2.9 x 2.5 x 2.8 m Transport dimensions (machine): 2.4 x 2.6 x 2.75 m Equipment: - Special equipment/device (modular clamping system) for milling of profile materials with an automatic cut-to-length device for workpieces using a circular saw module (non-functional) Njdsu Idnmopfx Ah Iswd - Horizontal workpiece clamping (force-fit) with vise clamping system and parallel bars (currently approx. 80 mm) - Tool changer type Chiron basket-type tool changer - Mechanical tool clamping lock, pull-in force 5000 N - Chip conveyor, make: Knoll - Loading and unloading system FMB LM RP 3000 The machine is not operational. Sale is at the indicated disposal price.