Kanonsko Pravo nakup rabljenega (393)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), Leto izdelave: 2024, obratovalne ure: 25 h, številka stroja/vozila: 24168, The inoCOMB Cabrio small silo is used for mixing and conveying pumpable materials (mineral or organic products) with a particle size of up to approximately 8 mm. Ready-mixed rendering mortar, dry mortar, screed material, or floor leveling compounds supplied by the material manufacturer can be processed. The material container of the small silo can be filled either with bagged goods, one-way containers, or big bags. During operation, the dry material is conveyed from the material hopper into the mixing tube via the dosing shaft. In the mixing tube, the dry material is mixed with water using the mixing shaft to produce a homogeneous, pasty or liquid product. At the outer end of the mixing tube, the mixed material falls directly into the pump hopper. In the pump hopper, the material is conveyed via the pump shaft to the pump unit (rotor/stator). From there, the material is pumped through material hoses to the point of application. Iodjyk Twpspfx Abxsic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, številka stroja/vozila: 0000071163, Type: ALPHA20 HOR Iodsunv Rxspfx Abxsic Equipment / Additional information: with Tank Refix DE (Serial No.: 15 P 0316 90633)

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: LC561, Used UHT Milk Preparation Room Tetra Pak 6600 L/h Technical Overview of the System The used UHT milk preparation room Tetra Pak 6600 L/h offers a complete solution for the aseptic preparation of UHT milk, drinking yoghurt, juices, and flavoured beverages. Currently in storage and ready for reinstallation, the system delivers high thermal and microbial efficiency. Furthermore, its modular design allows operation at 2,640 L/h, 3,850 L/h, and up to 6,600 L/h in the full configuration, making it highly adaptable to different production requirements. Homogenization Section At the core of the used UHT milk preparation room Tetra Pak 6600 L/h is a Tetra Pak homogenizer, model Tetra Alex, which ensures effective reduction of fat globule size and uniform product texture. This stabilizes complex emulsions such as flavoured milk or drinking yoghurt and prevents phase separation during storage. It is important to note that this homogenizer is not aseptic and is located before the UHT sterilization process, thereby eliminating any microbial load introduced during homogenization. Additionally, the homogenizer supports high working pressures and facilitates maintenance. The robust construction guarantees long-term reliability. Integrated Degassing System The system is equipped with a Tetra Pak deaerator (2005) featuring an auxiliary pump and tank. Specifically, this component removes dissolved oxygen and unwanted gases from the product prior to thermal treatment. As a result, it improves product stability and reduces oxidation. Additionally, the vertical construction ensures efficient gas separation. At the same time, the design minimizes product losses and ensures a continuous flow to the next stage. High-performance UHT Module Thermal sterilization is achieved using a tubular UHT heat exchanger produced by Tetra Pak, model Tetra Therm Aseptic. This particular component sterilizes products via indirect heat transfer while maintaining organoleptic properties. Of note, the module contains a holding coil to maintain temperature for a defined period, thus meeting food safety regulations and ensuring microbial safety. Its modular design also enables easy integration into existing lines. Electrical Control and Automation The line comprises an electrical control cabinet, a Siemens PLC, and operator panels for precise control of every phase. Significantly, it comes with detailed electrical diagrams, Festo pneumatic valves, and Danfoss frequency inverters to dynamically control pumps and heat exchangers. This automation enables continuous processing and optimizes CIP cycles, reduces downtime, and increases traceability. Above all, it ensures reliable performance under varied operating conditions. Conclusion In summary, the used UHT milk preparation room Tetra Pak 6600 L/h offers a complete, highly efficient system for the preparation of UHT milk and beverages. With its top-quality components and scalable design, this line is an ideal solution for both expanding and modernizing existing dairy operations or beverage plants. Isdpfx Aowqxhhjbxjic

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Na prodaju: 3 pH-kontrolera za dozirne sustave (proizvođač Dosatronic) – Pogodno za regulaciju pH vrijednosti i kemijske dozirne sustave – Industrijska izvedba – Nekorišteno (lager roba / New Old Stock) Uređaji potječu iz industrijskog skladišta i nikada nisu bili instalirani. Prikladno za: – Preradu vode – Bazensku tehniku – Kemijsku industriju – Prehrambenu proizvodnju Stanje: Nekorišteno, dulje skladišteno. Funkcionalnost nije provjerena. Prodaja pojedinačno ili u kompletu. Cijena: 390 € po komadu ili 1.050 € za sve 3 Lokacija: Slovačka (EU) Dostava moguća diljem Europe Iiodpfx Ajyw Riqsbxsc

Stanje: dober (rabljeno), Leto izdelave: 1980, Ponujate blagovno znamko naprave znanega nemškega proizvajalca Griebel. Iedpfx Ajzcxa Hebxsic Lastnosti naprave: - Električni pomik, stroj za rezanje in ravnanje - Reže po podatkih na tablici do 2 mm jekla, aluminij precej več - Uporabna dolžina: nekaj več kot 1,5 m - Debelina pločevine železo: 2 mm - Ravnanje pločevine s pomočjo nastavljivega večvaljčnega sistema - Dolžina in število kosov sta prednastavljiva - Teža cca 2 t - Na voljo imamo tudi druge naprave in orodja Dobite račun po §25 a UStG. DDV je vključen v ceno računa. Prevoz lahko organiziram po želji, na voljo je viličar. Brezplačno nalaganje, kot je vidno na fotografijah. Ogled in preizkus sta možna po predhodnem telefonskem dogovoru. Plačilo z gotovino ob prevzemu – če lahko še kaj storim za vas, prosim, pokličite me – hvala. Osebni prevzem v 8 dneh po zaključku dražbe.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, trajanje garancije: 12 meseci, Certificirano po DGUV do: 07/2027, skupna masa: 49 kg, skupna dolžina: 450 mm, skupna širina: 620 mm, skupna višina: 1.030 mm, potrebna višina: 1.030 mm, zahteva za prostor dolžina: 450 mm, potrebna širina: 620 mm, NEW NEW Lye Mixing Device for Pretzel Lye NEW NEW Includes hydrometer Includes drip tray and dosing cap Stainless steel trolley with locking castors Maximum safety for your desired lye concentration. Optimal mixing, quantities precisely dispensed as required. Dimensions (WxDxH) in mm: 620 x 450 x 1030 NEW device + spare parts service Iisdorkz E Ujpfx Abxoc Further bakery machines in stock!

Stanje: novo, Leto izdelave: 2026, Holzkraft panel saw with scoring unit Compact panel saw with tiltable saw blade and high-quality sliding carriage made of anodised aluminium Cutting area of the compact panel saw directly on the rolling table Precision-guided format sliding carriage made of aluminium, anodised as standard Large-area table extension mounted on a telescopic arm, can be shifted longitudinally Standard table extension and table enlargement enable easy handling of larger workpieces Large-dimension cast iron saw assembly, double-mounted to the cast table, ensures maximum stability, precision, smooth operation, and long service life Large work table made of ground cast iron, making it extremely robust and resistant Smooth operation and precise cuts Aluminium sliding carriage With a proven ball contact system deployed millions of times Dust- and dirt-resistant due to minimal contact points between ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guideways Telescopic fence Iedpfoih Dwvex Abxeic Extendable aluminium telescopic fence Angle-adjustable With two professional folding stops Ek2a0i2ik Rip fence Supplied with fine adjustment and quick release as standard Scope of delivery: Table extension Table enlargement Anodised aluminium panel sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut length: 1660 mm Max. cutting height at 90° with scorer: 100 mm Max. cutting height at 45° with scorer: 79 mm Max. crosscut width left of saw blade: 1270 mm Cutting width with rip fence: 900 mm Saw blade tilt: 90° - 45° Max. saw blade diameter with scorer: 315 mm Max. saw blade diameter without scorer: 315 mm Scoring blade diameter (option): 80 mm Main saw blade speed: 4000 rpm Scoring blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction outlet diameter: 120 mm Extraction outlet diameter saw guard: 60 mm Weight: 295 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Schuko lakirna stena s zračno enoto in zračno stropjo Iijdsxvivqopfx Abxoc Prodaja po znižani ceni, demontaža mora biti opravljena samostojno Tehnični podatki so na fotografijah Lokacija: prevzem na lokaciji v Saški

Leto izdelave: 2000, obratovalne ure: 0 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 991666/A, Popolna naprava za proizvodnjo rigidne in/ali plastificirane PVC zmesi. Zmogljivost turbomikserja 700L, hladilnik 2000L. Popolnoma obnovljeno in prebarvano, z zamenjanimi ležaji osi turbomikserja, DC motor 130kW. Možnost testiranja v naši delavnici. Ijdpfoy Txzmex Abxeic

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 290 kg, skupna dolžina: 1.430 mm, skupna širina: 660 mm, skupna višina: 1.250 mm, vrsta goriva: električni, volumenski pretok: 15 m³/h, raven hrupa: 54 dB, vrsta zaščite (IP koda): IP55, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) – 2022 Model: SRKT 2 Iiodpfoxyhdbox Abxjc The compressor delivers completely oil-free air, dried to a pressure dew point of +3°C. Total operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Overall dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 liters Ambient temperature: from +5 to +40 °C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A – 0.35 kg Sound level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Stanje: dober (rabljeno), - Material: Stainless steel AISI 316 - Standing on legs - Tanks, top section adapted to the cellar's vaulted ceiling Dimensions: - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height, rear: 2500 mm - Total height, front: 3650 mm (including manhole dome) - Ground clearance: 340 mm Equipment: - Rectangular manhole 320 x 420 mm - Residue drain: tank slide valve DN 40, Friedrich No. 2 - Clear run-off: tank slide valve DN 40, Friedrich No. 2 - Sampling tap Iodpfxevlkgao Abxjic - Level indicator - Manhole dome NW 200

Leto izdelave: 2017, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17208800, This is a 190-litre rectangular gas boiling kettle from the premium manufacturer MKN, type Optima 850 (2062832S). Draining is easy via a safety drain valve. The kettle features a thermostatic temperature controller, automatic operational water monitoring and replenishment, and constant operational readiness. The fast steam system (Vapro) provides short heat-up times, and the double-jacket kettle with separate (integrated & maintenance-free) steam generator ensures low energy and water consumption and high efficiency for rapid heating. The unit has undergone a new inspection in our in-house workshop and is fully functional. The boiling kettle is in good used condition. The kettle is available from week 15. You will receive an invoice with VAT stated. Our used equipment service for you: •6-month warranty on all electrical parts, limited to replacement of faulty parts (excludes installation/removal costs) •High-quality branded equipment at fair prices •Professional refurbishment/inspection & expert cleaning •Tested & fully functional •Flexible shipping or self-collection options •Competent advice – before and after purchase •Provision of operating manuals, wiring diagrams, and spare parts •Inspection according to DGUV V3 Technical data: •W x D x H: approx. 1000 x 850 x 700 mm + 150 mm foot height •Inner kettle: 700 x 540 x 535 mm deep; for 4 x GN 1/1 – 200 mm deep Gas connection: •DN 20 (3/4") •Type: 2062832S •SN: 17208800 •Year of manufacture: 2017 Condition: Used, newly inspected, fully functional Additional information: •With electric temperature control via rotary knob •Usable volume: 180 litres •Rated volume: 195 litres •Housing made of chromium-nickel steel •Double-walled lid •Device switch, power selection switch •Temperature controller •Safety temperature cut-out •Permanent electrical connection •IPX 5 •Pressure regulator •Pilot heater •Indicator lights •Water solenoid valve / gas solenoid valve •Level controller with level electrode Boiling time: •34 min (determined according to DIN 18855) •Gas regulating valve Connection values: •0.04 kW 1 NPE AC 230 V. Fusing 1 x 16 A •Rated heat load: 30 kW, natural gas 20; 25 mbar SET •Can be converted for LPG 30; 37; 50 mbar Heat output: •Sensible: 3000 W, latent: 9000 W Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain stations by arrangement only Iedpfx Aeyxp Smebxoic If you have any questions, would like advice, or want to view something on site, you can reach us by phone during our business hours: Monday to Friday 9:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions.

Leto izdelave: 2023, stanje: novo, SEMIX Mobile 100S4 je opremljen z betonskimi mešalniki kapacitete 3000/2000 litrov, ki so lahko enogredni, dvogredni ali planetarni. V SEMIX betonskih mešalnikih so glede na razmerje silicija v betonski recepturi uporabljene obrabne plošče iz materialov NiHard4 ali Hardox 450. Vsi SEMIX zalogovniki za agregate so ukrivljene trapezne oblike za dodatno trdnost. Zalogovnike za agregate je možno polniti s čelnimi nakladalniki preko enega klančine. Agregati se tehtajo na tehtalnem transportnem traku, ki jih nato prenese na drugi transportni trak. Prisotnost dveh ločenih trakov zagotavlja natančnost tehtanja in učinkovitost za doseganje višje proizvodnje betona. Iiodpfx Abegay Raexoc Vse SEMIX betonarne upravlja SCADA sistem z integriranim Schneider PLC-jem. Uporabniki lahko spremljajo vse uporabljene materiale in jih integrirajo v svoj CRM sistem. Inženirska ekipa podjetja SEMIX lahko na daljavo poseže v avtomatizacijski sistem za podporo in servis.

Stanje: rabljeno, 4 adjustable clamping jaws INGERSOLL for faceplate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No.: 39.02.10000 / 501.397 Ijdpfx Asu Axzkjbxeic Jaw width: 70 mm Jaw length: 180 mm Jaw carrier height: 150 mm Base plate: 325 x 265 mm - Reversible step jaws for turning and drilling operations - Jaw adjustment via trapezoidal thread spindle - Jaw carriers with 6 slots 40 x 30 mm for fastening - Slot spacing: 280 x 133 and 220 x 90 mm (center-to-center) Dimensions (L x W x H): 325 x 265 x 215 mm Weight per jaw: 36.5 kg Total weight (all 4 jaws): 146 kg Good condition

Stanje: rabljeno, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028 Year of manufacture: approx. 1993 Iododzqtgepfx Abxoic Cutting range round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Blade speed: 25–108 m/min, stepless Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw with twin-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Steplessly adjustable lowering speed - Hydraulic vice clamping with hydraulic top bundle clamping - Hydraulic unit integrated into the machine base - Material feed roller on infeed side with gear motor (not mounted on machine frame) - Coolant system with coolant pump for water-emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop total length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable Without roller conveyor Floor space required (L x W x H): 2800 x 1400 x 2450 mm Weight of machine: approx. 3 t Weight of stop system: approx. 800 kg In good condition

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Tukaj prodajamo staro plinsko konzolo, ki je bila uporabljena za Eltropulsovo plazemsko nitrirno napravo. Vključuje 4 Bronkhorst MFC-je in drugo regulacijsko elektroniko. Te posebne komponente smo kupili skupaj z drugimi predmeti, vendar jih ne potrebujemo. Zato so tu ponujene kot nepreverjeni nadomestni deli za zainteresirane. Iodpfey Sxtgsx Abxjic

Stanje: rabljeno, Automatic Lathe, Lathe with Copying Device UMA Type F1 NK 60 Copying Lathe for Chuck Workpieces Machine No. 28-0031 Year of Manufacture: 1971 Max. turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in main spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm (4 steps) Main motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle flange for chuck mounting short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speeds selectable via 4 gearbox stages - Hydraulic clamping device with expanding arbor, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER type KMCA 61, with hydraulic feed motion - Left side with cross slide with hydraulic feed motion - Coolant unit slid under the machine bed - Hydraulic power unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram included Space requirement for automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement for automatic lathe only (L x W x H): 2400 x 1900 x 1500 mm Space requirement for hydraulic unit only (L x W x H): 1400 x 850 x 1700 mm Weight of automatic lathe: 2400 kg Weight of hydraulic unit: 400 kg Total weight with pallet: 3000 kg Good condition Iodpfxsib D H Rj Abxeic

Stanje: novo, Leto izdelave: 2025, TRSI Automatic Saws: Performance, Precision and Optimization TRSI Ø600 Push-Feed Saw – 90° Cut: Perfect for Beech Sawmills Ijdpfxev Iqdds Abxoic The TRSI Ø600 is an automatic optimization saw with push-feed, developed for cutting beech timber with a consistent thickness and variable width. Its modular monoblock design and Ø600 blade make it ideal for precise applications. Key Features: - Programmed and Optimized Cutting: Precise, repeatable operations or optimization to reduce waste and maximize yield. TRSI Ø700 Push-Feed Saw – 90° Cut: For Beam and Packaging Cutting The TRSI Ø700 is designed for powerful cutting of beams and packaging materials. Featuring a Ø700 blade and a robust structure, it offers high productivity both in sawmills and packaging industries. Key Features: - Programmed and Optimized Cutting: Maximizes material usage while minimizing waste. TRSI: The Customizable Solution for Every Sector TRSI is the ideal automatic saw for companies seeking speed, reliability and precision. It can be customized to your needs and is perfectly suited for various production sectors. Advanced Technology: - Advanced Software: Simple programming and process optimization. - Complete Integration: Compatible with your enterprise systems. - Remote Maintenance: Technical support available at any time. Superior Performance: - Ultra-precise Motion: Fast push-feed on ball screw guides for smooth and accurate cuts. - Brushless Motors: Maximum performance and reliability. - Reinforced Structure: Guarantees flawless movement without vibrations. Accessories for Maximum Productivity: - Custom Feeders: Minimize downtime. - Manual and Automatic Printers: Clear marking of semi-finished products. - Optimized Discharge Systems: For all types of processing. Rely on Cursal for Innovation and Performance With the TRSI, you achieve maximum efficiency and precision by adapting every aspect of the machine to optimize your production flow. Contact us for tailored advice and take your production to a new level of quality.

Leto izdelave: 2023, stanje: novo, SEMIX Mobile 100S4 je opremljen z betonskimi mešalci kapacitete 3000/2000 litrov, ki so lahko enogredni, dvogredni ali planetarni tip mešalcev. V betonskih mešalcih SEMIX se glede na vsebnost silicija v recepturi betona uporabljajo obrabni deli iz NiHard4 ali Hardox 450. Vsi zalogovniki agregatov SEMIX so upognjene trapezne oblike, kar zagotavlja dodatno trdnost. Polnjenje zalogovnikov agregatov je mogoče z nakladalniki na kolesih po eni rampi. Agregati se stehtajo na tehtalnem transporterju, ki agregate prenese na transportni transporter. Ločena transportna trakova omogočata večjo natančnost tehtanja in boljšo zmogljivost pri doseganju večjih izhodov betona. Iodpfx Absgay I Rjxeic Vse betonarne SEMIX so nadzorovane z SCADA sistemom s Schneider PLC krmilnikom. Uporabniki lahko spremljajo vse uporabljene materiale in jih povežejo s svojim CRM sistemom. Inženirska ekipa SEMIX lahko na daljavo poseže v avtomatizacijo in zagotovi servisno podporo.

Leto izdelave: 2023, stanje: novo, SEMIX Mobile 100S4 ist mit Betonmischern mit einem Fassungsvermögen von 3000/2000 Litern ausgestattet, die als Einwellenmischer, Doppelwellenmischer oder Planetenmischer ausgeführt sein können. In SEMIX-Betonmischern werden je nach Siliziumanteil im Betonrezept Verschleißteile aus NiHard4 oder Hardox 450 verwendet. Alle SEMIX-Aggregatlagersilos sind in trapezförmig gebogener Bauweise ausgeführt, um zusätzliche Festigkeit zu gewährleisten. Die Zufuhr der Aggregate zu den Lagersilos kann über Radlader mit nur einer Rampe erfolgen. Die Verwiegung der Gesteinskörnungen erfolgt auf dem Wiegeband, welches das Material an das Übergabeband weiterleitet. Durch die Verwendung von zwei separaten Förderbändern wird eine hohe Wiegegenauigkeit und Leistungsfähigkeit für größere Betonleistungen erreicht. Isdpfx Aegay Smjbxjic Alle SEMIX-Betonmischanlagen werden über ein SCADA-System mit integriertem Schneider-PLC gesteuert. Anwender können sämtliche verwendeten Materialien nachverfolgen und in ihr CRM-System integrieren. Das SEMIX-Ingenieurteam kann für Servicezwecke online in das Automatisierungssystem eingreifen.

Leto izdelave: 2012, stanje: novo, 26 pcs. angular gearboxes 32 kW, 1 3/8" 6-spline, pump flange BG2 Iedpfx Aoqbryusbxeic

Stanje: pripravljen za uporabo (rabljen), Kotna glava za vrtalni stroj UNION BFT 90 Orodni držalec SK 30 Iijdpfxsyn Iize Abxsc Nosilni ležaj za vrtalni stroj Union BFT 90

Stanje: rabljeno, Električni verižno dvigalo, elektro dvižna naprava, žerjav DEMAG Tip PK 2 N Tov. št.: 2033985 Leto izdelave: 1973 Nosilnost: 500 kg Dvižna višina kljuke: 15 metrov Hitrost dviga: 5 m/min - 2 nosilni verigi v dobrem stanju Iisdpfx Aoy E T Dmobxsc

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: LC562, Used UHT Milk Preparation Room Tetra Pak 4000 L/h Iiodpfoyhbudjx Abxec Operating Capacity and Product Versatility The used UHT milk preparation room Tetra Pak 4000 L/h offers optimized aseptic thermal processing for dairy and beverage applications. Specifically, the unit operates at variable flow rates from 2,000 to 4,000 liters per hour, making it suitable for regular milk, flavored milk, drinking yogurt, and condensed milk. Additionally, with program adjustments, fruit juices, nectars, and soft drinks can also be processed. This flexibility makes it ideal for running multiple products. The system is currently still in storage, thus ready for relocation and installation at a new production site. Aseptic Inline Homogenization The used UHT milk preparation room Tetra Pak 4000 L/h includes an aseptic Tetra Pak homogenizer, model Tetra Alex, manufactured in 2006. In particular, this unit, located downstream of the preheating section, operates under sterile conditions to break down fat globules and ensure an even distribution of solid and liquid phases. As a result, it helps maintain the emulsion stability in flavored milk and yogurt drinks. Furthermore, the aseptic inline design reduces the risk of contamination after thermal processing. Therefore, it maintains the physical and chemical consistency of the product throughout subsequent stages. Additionally, the robust construction simplifies cleaning and routine maintenance. Clean-in-Place (CIP) System The line integrates a CIP (Clean-in-Place) system supplied by Gemak in 2009, consisting of four dedicated tanks: nitric acid, caustic soda, hot water, and rinse water. Notably, the system automatically sanitizes all product-contact surfaces under controlled parameters, ensuring compliance with hygiene standards across multiple cleaning phases. It also manages solution recovery and water usage optimization across all cleaning cycles. Thus, the CIP system in the used Tetra Pak 4000 L/h milk preparation room minimizes downtime and supports continuous production. Most importantly, it protects product integrity between production cycles. Thermal Treatment and Holding Time Control The sterilization process is based on a holding tube supplied by Tetra Pak in 2006, keeping the product at target temperature for the required dwell time. Combined with a tubular UHT heat exchanger, this tube enables indirect and even thermal processing. Accordingly, the system ensures precise holding times and optimal microbial reduction. The unit also preserves organoleptic properties through uniform heat transfer. The used UHT milk preparation room Tetra Pak 4000 L/h thus offers reliable processing for both dairy and plant-based applications. Degassing and Sterile Storage The system includes a Tetra Pak degasser from 2006, which removes dissolved oxygen and unwanted gases prior to the UHT process. This enhances product shelf life and minimizes oxidative degradation. Furthermore, w...

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Several Tool-Temp controllers are available for sale. Ijdov E Uirepfx Abxeic