Kanalni Rezalnik nakup rabljenega (1.596)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes Nledpfx Ast Aarpjc Hsi >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: zelo dobro (rabljeno), Proizvajalec: LVD Model: Electra FL3015 Serijska številka: 36445 Država porekla: Belgija Leto izdelave: 2016 Tehnični parametri: Tip laserja: vlakenski (Fiber Laser) Njdpfx Acsxvawle Holi Moč vira: 3 kW Delovno območje: 3000 mm × 1500 mm Vir laserja: Rofin FL030 Fiber Laser Source Serijska številka vira: 987 Leto izdelave vira: 2015 Dodatna oprema: Thermotec Chiller Unit – hladilna enota za stabilizacijo temperature vira laserja Donaldson Torit DCE DFPro-4SPK – sistem za odsesavanje in filtracijo dima Infeed/Outfeed Shuttle Table – avtomatska miza za nakladanje in razkladanje Light Guards – svetlobni varnostni sistem

Stanje: dober (rabljeno), Leto izdelave: 1980, dobro ohranjena rezkalna naprava priznanega proizvajalca Okoma, 40-osni vreteno Nedexvllzopfx Ac Hjli

Stanje: rabljeno, Leto izdelave: 2003, Maszyna używana Rok produkcji: 2003 Wyposażenie i dane techniczne: - Automatyczna regulacja wysokości i kąta wrzeciona z impulsami dziesiętnymi - Mechaniczny wskaźnik wysokości wrzeciona i elektroniczny wskaźnik kąta nachylenia - Pokrywa odchylana z prowadnicami aluminiowymi - Regulowany otwór stołu za pomocą przesuwnego elementu blatu - System szybkiej wymiany narzędzi - Długie stoły z wysuwnym podparciem elementu obrabianego - Wymiary stołu: 2500 x 780 mm - Regulacja wrzeciona: od -45° do +45° - Średnica wrzeciona: 30 mm - Skok wrzeciona: 230 mm Njdpfx Asw I H Rqjc Holi - Maks. otwarcie stołu: 300 mm - Silnik: 5,5 kW z automatycznym rozruchem gwiazda-trójkąt - Prawo-lewoskrętnie - Prędkości obrotowe: 3000/4500/6000/8000/10000 obr./min - Elektroniczne programowanie wysokości wrzeciona, kąta nachylenia wrzeciona oraz pozycji przykładnicy (przykładnica frezarska) - Odsysanie górne i dolne: 120 mm Wymiary: 2570 x 1450 mm Waga: ok. 670 kg Dostępność: od zaraz Lokalizacja: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki Pomiki (X / Y / Z) 350 × 250 × 256 mm Pomiki osi U / V ± 70 mm Maksimalna dimenzija obdelovanca (DxŠxV) cca 750 × 550 × 250 mm Največja masa obdelovanca cca 450 kg Nljdpoxt Hz Sofx Ac Hsi Dimenzije mize 620 × 400 mm Premer žice 0,15 – 0,33 mm (najpogosteje 0,25 mm) Maksimalen kot stožčastega rezanja ± 30° pri višini 100 mm Natančnost pozicioniranja ± 2 µm Psw N Hjxdubzjl Icsrb Sistem za vdevanje žice Popolnoma avtomatski, hiter, zanesljiv Generator Inteligentni GF AC Cut, nadzor iskre v realnem času Kakovost površine do Ra 0,1–0,2 μm (po končnih rezih) Krmilni sistem AgieVision (ergonomski, na dotik, 3D grafika) Dielektrik Deionizirana voda Dimenzije stroja (DxŠxV) cca 2200 × 2200 × 2200 mm Teža stroja cca 3500–4000 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, trajanje garancije: 24 meseci, Certificirano po DGUV do: 12/2027, največja širina rezanja: 30 mm, vrsta vhodnega toka: Klimatska naprava, krmilna napetost: 24 V, nazivna moč: 1 kW (1,36 KM), vhodna frekvenca: 50 Hz, potrebna višina: 1.080 mm, zahteva za prostor dolžina: 750 mm, potrebna širina: 790 mm, JAC rezalnik kruha Model: Varia Pro enostavna uporaba 200 rezin/min širina reza/dolžina kruha 380 mm robustni krožni rezalnik enostavno ročno upravljanje Nodsuirzhopfx Ac Hjli debelina rezine nastavljiva od 4 do 30 mm Mere: 790 x 746 x 1080 mm (š x g x v) Maks. mere kruha: 380 x 340 x 160 mm (d x š x v) Samo pri nas preverjeno po DGUV V3 Priklop 230V, 1 kW Novo, SAB preverjeno z garancijo + storitvijo rezervnih delov Možnosti: - Dostava - Izvedba iz nerjavečega jekla - Rezervni nož - Avtomatska klešča - Nosilec za vrečke - Posebne barve - Sprednja polica za kruh - Vzdrževalna pogodba - Servisni paket - Uvajanje & zagon - Leasing & najem Veliko drugih vrhunskih rezalnikov kruha na zalogi!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm Nodpfswpi Dqjx Ac Hsli - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 4.428 h, Cena: Po dogovoru - Leto izdelave: 2003 - Dokumentacija na voljo: Da - CE-označba prisotna: Da - CE-certifikat prisoten: Ne - Delovne ure: 4428 - Tip krmiljenja: Siemens - Krmiljenje: CNC - X-pot: 6500 mm - Y-pot: 3300 mm - Tip resonatorja: 7XSE-60 - Moč: 37,0 kW Finančne informacije DDV: Naveden cena je brez DDV DDV/obdavčitev po razliki: DDV je odbitna za podjetnike Dostava in odkup možna kadarkoli za vse iz industrijskega sektorja Nedjwnidhepfx Ac Hjli Lukas van Rossum

Stanje: zelo dobro (rabljeno), Kuter Alpina 200 litrov Leto izdelave: 2007 Nedpfx Aoxy R Sbsc Hjli Cena: 28.500 evrov

Stanje: novo, Leto izdelave: 2025, dolžina podajanja os X: 310 mm, dolžina pomika po osi Y: 170 mm, dolžina podajanja os Z: 340 mm, potovalna razdalja osi X: 310 mm, pomik osi Y: 170 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 55 obr/min, Macmon M100 NC with Heidenhain TNC 128 Year of manufacture: 2025 The machine is new and can be inspected at any time. The Macmon M100 NC is a compact universal milling machine designed for precise machining tasks in workshops, training centres, and single-part production. Its robust cast construction and backlash-free guides ensure high accuracy and repeatability. Equipped with the Heidenhain TNC 128 control system, the machine allows both manual operation and NC-controlled machining. The cross axis (Y) is CNC-controlled, while both the longitudinal (X) and vertical (Z) axes can be operated manually or automatically. Technical specifications: Control system: Heidenhain TNC 128 Travel distances: Manual operation: X = 310 mm / Y = 170 mm / Z = 305 mm NC-controlled: X = 300 mm / Y = 165 mm / Z = 300 mm Controlled axis: Y-axis (cross axis) Nsdpfxoxqh Hde Ac Hsli Milling head: swivels 0–90° Drive: infinitely variable Operating modes: combinable manual and NC operation Equipment: coolant system, work light, machine cabinet Condition: New (year of manufacture 2025) Immediately available Can be inspected under power at any time

Stanje: zelo dobro (rabljeno), Trumpf TruTool C160-2 Plus Electric Slitting Shears Nledpfx Aceuhm Rbe Hoi Shears in very good condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, trajanje garancije: 3 meseci, Certificirano po DGUV do: 12/2026, največja širina rezanja: 20 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 660 mm, skupna širina: 950 mm, skupna višina: 1.100 mm, vhodna frekvenca: 50 Hz, leto zadnje generalne obnove: 2025, Model TS 38 plus Krožna rezilna naprava Namizni stroj s premičnim podnožjem Izvedba iz nerjavečega jekla, enostavna in robustna tehnika Debelina rezine nastavljiva od 3 do 20 mm Mere: 950 x 660 x 1000 mm (Š x G x V) Maksimalne mere kruha: 370 x 200 x 160 mm (D x G x V) Priključek: 400V, 16A-CEE vtič Nljdpfx Aju Dv Uqjc Hoi Rabljeni stroj, očiščen z jamstvom in servisom rezervnih delov Možnosti: Vzdrževalna pogodba Servisni paket Dostavna služba Uvajanje in zagon stroja Leasing in najem Mnoge rezalke kruha na zalogi!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Nedjvb Ud Ujpfx Ac Hsli Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: rabljeno, Leto izdelave: 1996, Plazemski rezalnik, plazemsko rezanje Proizvajalec: SAF Tip: Plasmatome 3 Krmiljenje: Digisaf 2.5 Proizvajalec plazemskega izvora: SAF Tip plazemskega izvora: Nertajet HP120 Mere reza: 6000x2000 mm Debelina reza: 35 mm Vključno s filtrom/odsesovanjem! Nodew Dpi Nepfx Ac Hjli Vključno z dokumentacijo in dodatki Stroj je demontiran za transport - Letnik izdelave: 1996 - Dokumentacija na voljo: Ne - Prisotnost CE certifikata: Ne Finančne informacije DDV: Naveden je neto znesek, DDV ni vključen DDV/obdavčitev razlike: Za podjetja je možen odbitek DDV Dostava in odkup možna kadarkoli za vso industrijsko opremo Lukas van Rossum

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, trajanje garancije: 24 meseci, Certificirano po DGUV do: 09/2027, skupna dolžina: 440 mm, skupna širina: 1.700 mm, skupna višina: 470 mm, vhodna frekvenca: 50 Hz, NOVO NOVO Schneid-LEO LL NOVO NOVO Rezkalnik za prestice, žemljice, bagete Namizna naprava iz nerjavnega jekla s podaljšanim dovodnim trakom Višina rezila nastavljiva za debelino reza Hitrost traku nastavljiva Le pri nas preizkušena po DGUV V3 Priključek 230/240V, 50 Hz, pripravljen za priklop Prehodna širina/višina 140/90 mm Mere (ŠxDxV) v mm: 1700 x 440 x 470 NOV stroj & SAB preizkušen Z garancijo + servis rezervnih delov opcijsko: - Voziček za LEO - Zarezalnik - Dostava - Pogodba o vzdrževanju Usposabljanje & zagon Nledpfxjf Epwvo Ac Hsi Obiščite naš prodajni center z opremo in stroji za pekarstvo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm Nlodpfx Asu Racrjc Hji >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 24 meseci, vhodna napetost: 230 V, Certificirano po DGUV do: 12/2027, skupna dolžina: 450 mm, skupna širina: 400 mm, skupna višina: 710 mm, vhodna frekvenca: 50 Hz, moč: 0,1 kW (0,14 KM), NOVO NOVO Stroj za strganje čokolade NOVO NOVO Model: QM 210 NOVO Nlsdpfxstpl Uvs Ac Hji - za 2 bloke - debelina ostružkov 0,1 - 3 mm - enostavno upravljanje - rezila se lahko posamično zamenjajo - regulacija hitrosti rezil - dimenzije bloka: 17-40 mm široko, 145-210 mm globoko, 40-330 mm visoko - učinkovito, hitro delo, primerno za veliko proizvodnjo - stroj za čokoladne ostružke iz nerjavečega jekla - samo pri nas preizkušeno v skladu z DGUV V3 - moč motorja 90 W - priključek 220V, pripravljen za uporabo - mere 400 x 450 x 710 mm (ŠxGxV) - samo pri nas preizkušeno v skladu z DGUV V3 - nova naprava in preverjeno po SAB - 24-mesečna garancija + storitev rezervnih delov Možnost: Dostava Leasing & najem storitev Odtisna miza Vzdrževalna pogodba E-Box Servisni paket Na zalogi še 400 pekarskih strojev!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 Nljdpju T D Nrofx Ac Hsi >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2026, nazivna moč: 2 kW (2,72 KM), vhodna frekvenca: 50 Hz, leto zadnje generalne obnove: 2024, Model TS 38 plus Krožna rezalna naprava Namizni stroj Izvedba iz nerjavečega jekla, Rezilo na novo nabrušeno in prevlečeno Ročno upravljanje Debelina rezine nastavljiva od 3 do 20 mm Mere: 950 x 660 x 500 mm (ŠxGxV) Maks. dimenzije kruha: 370 x 200 x 160 mm (DxŠxV) Samo pri nas preizkušeno po DGUV V3 Priključek 400V, vtikač CEE 16A Rabljeni stroj očiščen in pregledan s strani SAB Z garancijo + servisom nadomestnih delov Možnosti: Premični podstavek Vzdrževalna pogodba Servis rezervnih delov Nodpfx Acepyglme Holi Servisni paket Dostavna storitev Najem in leasing Na zalogi še več vrhunskih rezalnikov kruha!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: Nlsdpfsu Nvwvox Ac Hsi - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table Njdpfx Ajxu Hbhec Heli >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-axis Active Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed in TOP Condition Nlodpfouc Ubwox Ac Hei Technical data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (newly planed) >> Spindle speed: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travels X/Y/Z: 400/220/400 mm >> Vertical milling head on spindle carrier, adjustable by 150 mm >> Vertical and horizontal quill – SK40 extendable >> Drawbar thread: S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3-axis TNC 113 Active Digital Readout by Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from the laboratory of a government facility where it was rarely used. The machine exhibits minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this later FP2 model, the feed can be infinitely adjusted on all three axes, and rapid traverse is available on every axis. A major advantage is the active 3-axis digital readout. Using the Heidenhain path control, you can enter dimensions that the machine then approaches automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test the machine under power on site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication Nljdpfx Asu R D I Sjc Hsi >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm Nledjxu E R Ijpfx Ac Hei >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication About the machine: Nedpfx Acexu E I Ho Holi For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!