Kaltenbach Kks 400 nakup rabljenega (111)

Leto izdelave: 2009, Stanje: rabljeno, številka stroja/vozila: 0301-230036, Kaltenbach drilling and sawing system—a combined solution for applications in light to heavy steel construction. This Kaltenbach system allows steel profiles to be drilled, center-punched, and cut to length in a single operation. It processes rolled profiles such as I-beams, T-sections, U-channels, angle steel, hollow sections, and flat steel. The drilling unit is equipped with an automatic tool changer on three drilling spindles, each accommodating five tool sizes. Tools are positioned with high precision using ball screw drives and servo motors. The entire system features an integrated length measurement unit. Technical Specifications KDXS 1215 Drilling System: • Working range min. 80 x 65 x 10 mm • Working range max. 1200 x 450 mm • 3 drilling units (vertical Y-axis, horizontal Z- and W-axis), each with 11.0 kW frequency-controlled motors: 33.0 kW total • Automatic tool changer (3x5) • Drive power frequency-controlled 78 kW • Working height 640 mm • Machine dimensions 6100 x 1300 x 3730 mm (LxWxH) • CNC control with Profiline 3 software Fjdpsrr Sq Nofx Ah Dogh Kaltenbach HDM 1432 high-performance circular saw—a vertical saw with a swiveling mounting for high cutting capacity in medium and heavy steel sections. Working range at 90° saw cut: 1200 x 450 mm. Mitre adjustment for angled cuts from -45°/90°/+35°. This circular saw system is equipped with a segmented saw blade, diameter 1430 mm. High cutting performance is ensured by a powerful drive system. • NC-controlled cutting angle adjustment • Feed via ball screw for optimal cutting results and short cycle times

Leto izdelave: 1994, Stanje: rabljeno, Max. saw blade diameter: 350 mm Fgodpfxsud Uvks Ah Doh Manual material clamp Minimum quantity lubrication Digital angle display

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: nepreverjeno, Kaltenbach KC1221 plazemski kopirni robot s transportnim sistemom T14 Fedpfjw Uglbex Ah Degh

Leto izdelave: 1983, Stanje: rabljeno, Aluminium cutoff saw, under-table saw, aluminium circular saw, semi-automatic aluminium circular saw, mitre saw, glazing bead saw - Saw blade diameter: 355 mm - Speeds: 1420/2880 rpm - Drive power: 3.7/4.5 kW - Equipped with: coolant system Fgodpfxod Ixn Rj Ah Dsh - Dimensions: 990/1140/H1535 mm - Weight: 596 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer vrtanja: 32 mm, višina izdelka (maks.): 330 mm, višina izdelka (min.): 5 mm, največja širina izdelka: 625 mm, širina izdelka (min.): 35 mm, največja hitrost vrtenja: 1.600 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine type: CNC drilling system for wide-flange beams & welded I-sections Working range: 35 x 5 - 625 x 330 mm Drilling specifications Drilling spindles vertical Y / horizontal Z+W: 1 / 2 units Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid feed / rapid return: 10,000 mm/min Drilling feed rate: 20 - 160 mm/min Rapid traverse positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 units Drive capacity 3 drilling drives: 5.5 kW (frequency-controlled) Total output: 16.5 kW 6 positioning drives: 0.75 kW Total output: 4.5 kW Working environment Working height above floor: 640 mm Conveyor system Cross conveyor at infeed side: 6 liftable conveyor chains, depth: 3.6 m Infeed roller conveyor: length 12.1 m for material Discharge roller conveyor: length 6.1 m for material Cross conveyor at discharge side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for both infeed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phase + earth Main supply fuse: 35 A (slow-blow) Power consumption (max.): 16 kVA Power consumption (nominal): 13 kVA / 25 A Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer provided, for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - KDE 603 DSTV+ beam drilling machine module with nested reading capability - KBS 620 DG mitre band sawing machine - Cut monitoring system - Length measuring unit model: M 120 PP - T12 conveyor system - Safety enclosure Fsdevzp Uzepfx Ah Djgh

Stanje: zelo dobro (rabljeno), Mitre circular saw by KALTENBACH, model TL 250 S, for aluminum and plastic profiles Saw blade diameter: 250 mm Fgodpfx Asmrq Evoh Deh

Leto izdelave: 1996, Stanje: rabljeno,

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Fodpfx Ajhzbipsh Degh Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Kaltenbach / APS CNC linija za prebijanje in rezanje ploščatih profilov in kotnikov – leto 2000. Kapaciteta ploščatih profilov: 500 mm. Kotniki: 60 mm x 160 mm. Fgedpfeirakrox Ah Doh 3- glavni prebijalni stroj. Prebijanje v vodoravni smeri. Dovod materiala z oprijemalom: 12 metrov. Rezanje pod kotom (mitra rezanje).

Stanje: dober (rabljeno), Leto izdelave: 1992, Cold Circular Saw, Metal Circular Saw, Mitre Saw, Circular Saw, Saw Plant Fgedpfx Asr R Abpoh Djh -Manufacturer: Kaltenbach, Cold Circular Saw, Metal Circular Saw Type RKT 631 HG with left/right roller conveyor -Stop length: 3,900 mm -Max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Swivel base adjustment: infinitely variable left/right -Cutting capacity at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting capacity at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min -Saw blade feed rate: infinitely variable 0 - 1,000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3,500/1,060/H1,100 mm / weight 378 kg -Roller conveyor right: total 3,960/1,370/H1,390 mm with stop / weight 670 kg -Machine dimensions: 1,670/1,760/H2,020 mm / weight 2,340 kg -Total weight: 3,381 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, CNC-STANZ-/BOHR-/SCHERLINIE für Winkelprofile und Bleche. TECHNISCHE DATEN STANZEINHEIT MATERIALSPEZIFIKATION Materialbeispiel: Stahl 52 Blechgröße (mm) x (mm) max. 300 x 25 Materialbeispiel: Stahl 37 Blechabmessung (mm) x (mm) min. 60 x 6, max. 400 x 20 Winkelprofil-Abmessung min. 50 x 50 x 5, max. 150 x 150 x 5 Stanzinformation TYP P2-XXX-XX, Anzahl 2 TYP P3-XXX-XX, Anzahl 3 TYP P5-XXX-XX, Anzahl 5 Stanzkraft (Tonnen) 110 Stanzdurchmesser (mm) x Materialstärke (mm) max. 32 x 20 Fgjdpfjvkphgox Ah Doh SCHEREINHEIT Scherkraft (Tonnen) 180 Kapazität max. 400 x 20 PRÄGEEINHEIT Gesamtanzahl der Zeichen: 40 Maximale Zeichenanzahl pro Arbeitsgang: 12 ANSCHLUSSWERTE Spannung 3-Phasen + Neutralleiter + Erde V 3 x 400 Absicherung (A) 63 träge Leistung (kW) 25 Frequenz (Hz) 50 Zulässige Netzspannungstoleranz für m-Achse % +/- 10 Drehrichtung Rechts Luftdruck (bar) 6–8 Luftbedarf (m²/Stunde) 250