Kabel Granulator nakup rabljenega (1.174)

Leto izdelave: 2024, Stanje: novo, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces Kjdpfxjp Sr H Dj Ah Asnf The compact redesign integrates the best features of the proven GST and GSC series, with a particular focus on weight, handling, and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in ultra-quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and up to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, both rotor and stator knives can be adjusted outside the machine, minimizing maintenance downtime. The pronounced tangential, curved rear wall of the cutting chamber, combined with the aggressive, open rotor design, ensures reliable material feeding and minimizes the risk of blockages. These compact granulators are suitable for blow-molding operations and ideal for recycling large parts such as bottles, jerrycans, and crates. Thanks to their low feed height, they can be easily loaded by hand or with a small conveyor belt. Low noise emissions and a small footprint make these granulators the perfect solution for inline granulation. Optional rear wall with raised stator knife (M version): The feed method with a higher-positioned stator knife is especially suited for thick-walled and more compact parts, such as injection-molded components, profiles, sheets, etc. The cutting geometry and the rotor’s reduced aggressiveness result in high-quality regrind, regardless of the material’s type or form (e.g. injection-molded parts, profiles, sheets, etc.). Control system and control cabinet: The integrated control system and operator console fully comply with all applicable safety regulations and can be tailored to specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection systems, and discharge units can be seamlessly integrated into the machine’s control system. An optional intelligent energy-saving function is available to improve efficiency, automatically reducing power consumption during idle times and starting or stopping the system based on the status of upstream machines. Standard configuration with blower, 0.75 kW power consumption, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening for M version option (mm): 295 x 450

Stanje: dober (rabljeno), Leto izdelave: 1993, Granulator SHEER In stock / Available Kedpsip N Unefx Ah Aonf 5.5 kW motor 1 new cutter optional: €4,000

Stanje: rabljeno, From insolvency, a burner package from Dinse is offered for sale. The package was only used for testing purposes and shows only minor signs of use on the current and gas nozzles. Dinse MPW with DIX 6-2-230 WS 45 torch handle Hose: MPW 2-300-8-3A Features integrated wire feed in the torch, suitable for wire diameters of 0.9–1.2 mm Gas-cooled Length: approx. 5 meters Euro central connector Rated for 300 Amps at 60% duty cycle Knsdpfob Rbvijx Ah Ajf

Stanje: zelo dobro (rabljeno), Trumpf Haas Light Guide Cable LLK-D 06, 60 meters, SG H3m 22-36-56-A7/07, 1410224 - 07274 Knjdpfx Ajgqxlgoh Aef

Leto izdelave: 2006, obratovalne ure: 32.470 h, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2057011/010, WPC granulirnik, zmogljivost 500 kg/uro. Popolnoma opremljen z 2 granulacijskima glavama in kompletom rezervnih vijakov. Vključen motor z rezalno enoto in EMF mešalcem. Krmilna omara za pogon. Kjdpexapnhjfx Ah Aenf

Stanje: pripravljen za uporabo (rabljen), Specifikacije: Model: 1120SPL Proizvajalec: Hosokawa Polymer Systems (ZDA) Rezervna komora: 11" x 20" (279 mm x 508 mm) Motor: 20 KM / 15 kW, 400V, 3 faze Premer rotorja: 12,5" (318 mm) Rezila rotorja: 3 Stacionarno rezilo: 1 Površina sita: 373 in² (2406 cm²) Tipična zmogljivost: do 650 lbs/h (≈295 kg/h), odvisno od materiala in velikosti sita Približna teža: 1.600 lbs (726 kg) Knsdpjxvc D Usfx Ah Asf Dimenzije: D 69” x Š 36” x V 57” (1753 x 914 x 1448 mm) Lastnosti: Robustna varjena jeklena konstrukcija Enostaven dostop za čiščenje in vzdrževanje Varnostna stikala in motor na pogon preko jermena Idealno za uporabo ob preši, po proizvodnji ali za recikliranje Čista in dobro vzdrževana enota – pripravljena za obratovanje

Leto izdelave: 2024, Stanje: novo, Slow-Speed Granulator Rotor Diameter (mm): 180 Rotor Width (mm): 180 Rotor Speed (rpm): 150 Drive (kW): 3 Number of Rotor Blades: 18 Number of Stator Blades: 2 Screen Perforation (mm): >5 Weight approx. (kg): 140 The slow-speed granulators of the GSL Series are primarily used in injection moulding and blow moulding applications for inline granulation of sprues and defective parts. Various hopper and extraction systems allow for flexible integration of the machines into existing installations. GSL 180 For granulating sprues in injection moulding and blow moulding processes. Features of the GSL Series: - Low noise level thanks to the low rotor speed, inclined cut, and sound-insulated hopper in a multi-layer sandwich design - Powerful and efficient drive using branded gearbox - Easy maintenance, cleaning, and blade replacement The slow-speed granulators of the GSL 180 Series are equipped with a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm to 430 mm. The rotor consists of individual discs which are directly coupled to the helical bevel gearbox via an oversized drive shaft. This ensures efficient and low-maintenance power transmission. The material to be granulated can be fed manually, via conveyor belt, or by robot through a generously sized, soundproofed hopper with sandwich construction. As standard, the granulator is mounted on a low base frame with swivel castors. Discharge is via an extraction tray, inserted below the screen, with a pipe connection for a suction conveyor. Applications Knsdpeiy D Szofx Ah Ajf The slow-speed granulators of the GSL 180 Series are specially designed for the granulation of sprues from injection moulding and blow moulding processes. Thanks to easy access, colour and material changes can be carried out quickly. The low rotor speed also enables the processing of both soft and hard materials and ensures high material quality with minimal fine dust content.

Stanje: zelo dobro (rabljeno), Model Gral 300 Dubbelwandige kuip met kuipwagen Kuipinhoud: 300 liter Nuttige inhoud: 1/2 tot 2/3 Mixer motorvermogen: 16–24 kW, 2 snelheden Toerental mixerarm: I snelheid: 120 rpm, II snelheid: 185 rpm Chopper motorvermogen: 7–9 kW, 2 snelheden Toerental chopperarm: I snelheid: 1.297 rpm, II snelheid: 2.524 rpm Hydraulische motor: 1,5 kW Knjdpfegn Ehaex Ah Aof Dubbelwandige kuip, geschikt voor koeling of verwarming Afmetingen: - Hoogte: 2.900 mm - Diepte: 1.600 mm (zonder klep) - Breedte: 1.200 mm Alle productcontactoppervlakken: AISI 316 roestvast staal

Stanje: rabljeno, Granulator CPM 9042-12 z mnogimi rezervnimi deli Knsdpfx Asw Saayoh Aof

Stanje: dober (rabljeno), Powtec granulator, sieve, oscillating sieve, rotary sieve mill Pharmaceutical version, fully polished Capacity: 40–240 kg/h Sieve surface: 0.226 m² Motor power: 0.75 kW See our other advertisements Ksdpjwyf Hcsfx Ah Ajnf VMA Wekerom

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, We deliver the machines wherever you require, and can install them upon request in consultation. Optional: Stainless steel discharge unit, stainless steel storage silo, blower, approx. 3 meters of piping. Knodpfx Aeg Ainqjh Asf Grinding mill 1000 series 45 kW, 3 x 10 knife set or your preferred 5 x 2 rotor configuration (pictured: heavy duty rotor set and standard 3x2 set) 2 x stators screen deck as per your request Product discharge and storage available in various configurations, offered at especially favorable pricing in combination. Motor power can be adjusted. Other customizations can be discussed, such as a rotor modification with more knives, e.g., 5 rows of knives or a heavy-duty version. Delivery by arrangement. Call or email us for consultation or if you have questions—please respond with your name, company name, and a correct phone number. Without this correct information, RSS Recycling Shredders and Solutions cannot respond.

Stanje: rabljeno, Eldan granuliatorius HG129 Kedpfx Ahot Uyvro Ajnf

Leto izdelave: 2024, Stanje: novo, Direct drive via gear motor No adjustment work required thanks to special rotor knives Easy access for maintenance and cleaning Low noise emissions and low-dust granulate thanks to slow rotor speed Universally applicable with numerous options Rotor diameter (mm): 300 Rotor width (mm): 400 Rotor speed (rpm): 150 Drive power (kW): 7.5 Kodpfx Asn Hqxfoh Asnf Number of rotor knives: 33 Number of stator knives: 2 Screen perforation (mm): > 6 Approx. weight (kg): 550

Stanje: novo, Leto izdelave: 2025, Wir produzieren Pelletanlagen und Pelletpressen. Wir sind die einzigen Hersteller in Litauen, die ihren eigenen Kundendienst anbieten. Wir liefern, montieren, nehmen die Anlagen in Betrieb und schulen Ihr Personal. Das Anlagenpaket wird entsprechend Ihrem Budget ausgewählt. Wir stellen nicht nur die Maschinen selbst her, sondern produzieren auch Pellets; Sie können die funktionsfähige Anlage gern vor Ort besichtigen. Pellet-Produktionslinien von 100 kg/h bis 1 Tonne pro Stunde. TSF-Pressen Pelletmühlen – Motorleistungen von 7,5 kW bis 45 kW. Granulator TSF200 mit zwei Presswalzen Leistung ca. 60–200 kg/h Motorleistung 7,5 kW Matrizenstärke 3,2 cm Pelletdurchmesser (bei Bestellung anzugeben), Standard 6 mm Anzahl der Presswalzen: 2 Stück Maschinengewicht ca. 350 kg Granulator TSF230 mit drei Presswalzen Knodpjghmnrjfx Ah Asf Leistung ca. 100–250 kg/h Motorleistung 11 kW Matrizenstärke 3,5 cm Pelletdurchmesser (bei Bestellung anzugeben), Standard 6 mm Anzahl der Presswalzen: 2 Stück Maschinengewicht ca. 350 kg Granulator TSF260 mit zwei Presswalzen, rotierende Matrize Leistung ca. 150–300 kg/h Motorleistung 15 kW Matrizenstärke 3,5 cm Pelletdurchmesser (bei Bestellung anzugeben), Standard 6 mm Anzahl der Presswalzen: 2 Stück Maschinengewicht ca. 450 kg Granulator TSF360 mit drei Presswalzen, rotierende Walzen Leistung ca. 250–500 kg/h Motorleistung 22 kW Matrizenstärke 4 cm Pelletdurchmesser (bei Bestellung anzugeben), Standard 6 mm Maschinengewicht ca. 750 kg Granulator TSF400 mit drei Presswalzen, rotierende Walzen Leistung ca. 350–700 kg/h Motorleistung 30 kW Matrizenstärke 4 cm Pelletdurchmesser (bei Bestellung anzugeben), Standard 6 mm Maschinengewicht ca. 850 kg Granulator TSF450 mit drei Presswalzen, rotierende Walzen Leistung ca. 450–800 kg/h Motorleistung 45 kW Matrizenstärke 4 cm Pelletdurchmesser (bei Bestellung anzugeben), Standard 6 mm Maschinengewicht ca. 1.000 kg Die Maschinen verfügen über eine Garantie von 12 Monaten sowie CE-Zertifikate.

Stanje: zelo dobro (rabljeno), Muyang MUZL 610 granulator, 2x75kW, comparable to Munch, in very good condition, comes with die and rollers for sawdust. Knodswcg N Djpfx Ah Aef

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, We deliver the machines wherever you require, and install them upon request by prior arrangement. Optional: Stainless steel discharge element, stainless steel storage silo, blower, and approximately 3 meters of piping. Grinding mill 800 series, 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators Screen deck as per your request with Variable Frequency Drive, optional Product discharge and storage available in various configurations at highly competitive prices when combined. Motor power can be adjusted. Other modifications are negotiable, such as rotor adaptations (e.g., 5 rows of blades or heavy-duty version). Delivery/timeframe to be coordinated. Knodpfxot Iw Hus Ah Ajf Please call or email us to discuss or if you have any questions. Kindly respond with your name, company name, and correct phone number. Without this information, RSS Recycling Shredders and Solutions (Netherlands) will not be able to respond.

Leto izdelave: 2025, Stanje: novo, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 430 Rotor speed (rpm): 150 Drive power (kW): 4 Number of rotor knives: 45 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 250 The slow-speed beside-the-press granulators of the GSL series are primarily used in injection molding and blow molding applications for inline granulation of sprues and defective parts. With various hopper and extraction systems, the machines can be flexibly integrated into existing installations. GSL 180 — Designed for granulating sprues from injection molding and blow molding processes Highlights of the GSL series: - Low noise operation due to slow rotor speed, angled cutting design, and multi-layer sandwich-constructed soundproof hopper Knsdpfxji Hpfds Ah Aef - Powerful and efficient drive system with branded gearbox - Easy maintenance, cleaning, and knife replacement The slow-speed beside-the-press granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available with working widths from 120 mm up to 430 mm. The rotor consists of individual disks, which are directly connected to the spur gear drive via an oversized drive shaft. This ensures efficient and low-maintenance power transmission. The material to be granulated can be fed manually, by conveyor, or robot through a generously sized, soundproofed sandwich-constructed hopper. By default, the granulator is mounted on a low-profile frame with swivel castors. Discharge is carried out via a suction trough positioned beneath the screen, equipped with a pipe connection for a vacuum conveyor. Applications The slow-speed beside-the-press granulators of the GSL 180 series are specially designed for the granulation of sprues from injection molding and blow molding processes. Easy accessibility allows for rapid color and material changes. The low rotor speed enables the processing of both soft and hard materials and ensures good material quality with minimal dust generation.

Stanje: novo, Leto izdelave: 2025, Pelletų-briikečių gamybos linijos gamyba Esame vieninteliai gamintojai Lietuvoje, taip pat turime nuosavą techninį aptarnavimą. Organizuojame pristatymą, montavimą, paleidimą ir darbuotojų apmokymą. Parenkame optimalų įrangos komplektą pagal jūsų biudžetą. Mes ne tik gaminame įrangą, bet patys gaminame ir granules – galite atvykti ir apžiūrėti veikiančią techniką. Knsdpsghmptjfx Ah Ajf Siūlome medienos granulių gamybos linijas nuo 100 kg/val. iki 30 t/val. Mūsų gaminama įranga: Būgninės džiovyklos Juostinės džiovyklos Vamzdinės džiovyklos Granulių gamybos malūnai Smulkintuvai Konvejeriai Aušintuvai Ciklonai Bunkeris Pakavimo mašinos TSF-Justinas

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Optimization of an established concept. Size reduction of large-volume blow-moulded parts as well as start and end pieces A compact redesign integrates the best features of the proven GST and GSC series, with a particular focus on weight, ease of handling, and energy efficiency. These compact granulators are fully sound-insulated, resulting in exceptionally quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine to minimize downtime during maintenance. The highly tangential, curved rear wall of the cutting chamber, in combination with the aggressively open rotor design, guarantees reliable material feed and minimizes the risk of blockages. These compact granulators are suitable for use in blow-moulding operations and ideal for recycling voluminous parts such as bottles, canisters, and crates. Due to the low feeding height, the machines can be loaded easily by hand or with a small conveyor. Low noise emission and minimal footprint make this granulator a perfect solution for inline size reduction. Optional rear wall with elevated stator knife (M version): The feeding method with an elevated stator knife is better suited for thicker-walled and more compact parts, such as injection-moulded parts, profiles, sheets, etc. With the specialized cutting geometry and less aggressive rotor, high-quality regrind is produced regardless of material type or shape, including injection-moulded parts, profiles, sheets, etc. Control system and control cabinet: The integrated control system and operator panel comply with all applicable safety regulations and can be tailored to specific requirements. Furthermore, peripheral devices such as feed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine's control system. For increased efficiency, an optional intelligent energy-saving function is available, reducing power consumption during idle periods and allowing the system to start and stop automatically based on the status of upstream equipment. Standard configuration with blower, power input 0.75 kW, and 400 cyclone Knedpfx Ahjum Rnvs Ajf Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening, M version option (mm): 295 x 450

Leto izdelave: 2025, Stanje: novo, Size reduction of large-volume blow-moulded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with particular emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine to minimize maintenance downtime. The strongly tangential, curved rear wall of the cutting chamber, in combination with the aggressive open rotor design, ensures reliable material feeding and minimizes the risk of blockages. These compact granulators are suitable for use in blow moulding operations and are ideal for recycling large items such as bottles, canisters, crates, etc. The low infeed height allows the machines to be easily loaded by hand or with a small conveyor belt. Low noise emissions and minimal footprint make the granulator the perfect solution for inline size reduction applications. Optional rear wall with elevated stator knife – M Version: The feeding method with a higher stator knife is better suited for thicker-walled and more compact parts such as injection-moulded parts, profiles, sheets, etc. Due to the cutting geometry and reduced aggressiveness of the rotor, the machine produces high-quality regrind regardless of the material type or shape, such as injection-moulded parts, profiles, sheets, etc. Control system and control cabinet: The integrated control and operation console not only complies with all applicable safety regulations but can also be customized to meet specific requirements. Additionally, peripheral devices such as feed conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Knedpfx Ahep Sr Ans Aof Standard configuration with blower, power consumption 0.75 kW, and 400 cyclones. Rotor diameter (mm): 250 Rotor width (mm): 300 Drive (kW): 7.5 Number of rotor knives: 3 x 1 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 950 Feed opening (mm): 380 x 300 Feed opening option for M version (mm): 295 x 300

Leto izdelave: 2025, Stanje: novo, Reduction of large-volume blow-molded parts as well as start and end pieces Knsdpsp Sr Iajfx Ah Asf The best features of the proven GST and GSC series have been combined in a compact redesign, with particular emphasis on weight, handling, and energy efficiency. These compact granulators come fully soundproofed, resulting in extremely quiet operation. The granulators are available with a rotor diameter of 250 mm and widths of 300, 450, or 600 mm. The curved rear wall of the cutting chamber provides aggressive material intake and prevents material blockages. As with all ZERMA granulators, rotor and stator knives can be adjusted outside the machine to minimize downtime during maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material intake and minimizes the risk of clogging. These compact granulators are suitable for use in blow molding operations. They are ideal for recycling large-volume items such as bottles, canisters, and crates. Thanks to the low feed height, material can easily be fed manually or via a small conveyor belt. The low noise emission and compact footprint make this granulator a perfect solution for inline size reduction. Optional rear wall with elevated stator knife M version: The feed method with an elevated stator knife is better suited for thicker and more compact parts, such as injection-molded parts, profiles, and sheets. The cutting geometry and reduced rotor aggressiveness result in high-quality regrind, regardless of material type or shape, including injection-molded parts, profiles, sheets, etc. Control system and control cabinet: The integrated control system and operator console not only meet all current safety regulations but can also be adapted to specific requirements. Furthermore, peripherals such as feed conveyors, metal detection systems, and discharge systems can be seamlessly integrated into the machine’s control system. For improved efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 600 Drive (kW): 11 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen hole diameter (mm): >6 Weight approx. (kg): 1450 Feed opening (mm): 380 x 600 Feed opening M version option (mm): 295 x 600

Leto izdelave: 2025, Stanje: novo, Direct drive via geared motor Knodon Hqv Dopfx Ah Aef No adjustment work required thanks to special rotor knives Easy accessibility for maintenance and cleaning Low noise emissions and low-dust granulate thanks to slow rotor speed Universally applicable with numerous options Rotor diameter (mm): 300 Rotor width (mm): 800 Rotor speed (rpm): 150 Drive power (kW): 18.5 Number of rotor knives: 66 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 1100

Leto izdelave: 2025, Stanje: novo, APPLICATIONS The S Series granulators are primarily used as large central granulators in in-house recycling applications for processing large, thick-walled parts in a single stage or as secondary granulators following a shredder, in order to achieve higher output rates and throughput. GENERAL DESCRIPTION The high-performance granulators from the S Series offer working widths from 600 to 1000 mm, with rotor diameters of 400 and 560 mm. The fully welded, heavy-duty steel construction is designed to withstand the most demanding and versatile applications. Rotor bearings, knife mounts, and rotor shafts are oversized for enhanced durability. The standard V-cut ensures high-quality regrind material with a very low proportion of fines in the output. The removable third stator knife (optional) serves as a deflection wedge, enabling quick machine adaptation to different application scenarios. Additional standard features include externally adjustable knives, which help minimize contamination risk. S SERIES – HIGH-PERFORMANCE GRANULATOR ADVANTAGES: » The easily removable deflection wedge serves as the third stator knife and allows the aggressiveness of the rotor at the first cutting point to be adjusted. » The V-cut technology produces high-quality regrind while simultaneously reducing energy consumption and noise. » The heavy-duty bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure, thus avoiding material contamination. » Both rotor and stator knives can be adjusted from the outside. Rotor diameter (mm): 560 Rotor width (mm): 700 Drive capacity (HP): 75 Rotor knives (pcs.): 5 x 2 Stator knives (rows): 2 + 1 Hopper opening (mm): 700 x 650 Total length (mm): 2300 Machine length (mm): 2200 Total width (mm): 1600 Machine width (mm): 1060 Height (mm): 3509 Knsdpop N D Sbofx Ah Aof

Leto izdelave: 2025, Stanje: novo, APPLICATIONS The granulators of the S-Series are mainly used as large central granulators for in-house recycling applications, to process large, thick-walled parts in a single stage or as a secondary granulator downstream of a shredder to achieve higher throughput rates and optimal results. GENERAL DESCRIPTION The high-performance mills of the S-Series offer working widths from 600 to 1000 mm with rotor diameters of 400 or 560 mm. The fully welded heavy-duty steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, knife holders, and rotor shafts are oversized for increased durability. The standard V-cut ensures high-quality regrind with a very low proportion of fines in the output material. The removable third stator knife (optional) serves as a deflection wedge and allows for quick adaptation of the machine to different application scenarios. Standard features also include easily adjustable knives accessible from outside the machine, which reduces the risk of contamination. S-SERIES – HIGH PERFORMANCE GRANULATORS ADVANTAGES: » The easily removable deflector wedge acts as a third stator blade and can be adjusted to set the rotor aggressiveness at the initial cutting point. » The V-cut technology produces high-quality regrind while reducing energy consumption and noise levels. » The high-performance bearings are isolated from the cutting chamber to prevent lubricant ingress and bearing failure, therefore eliminating potential material contamination. » Both rotor and stator knives can be adjusted externally. Rotor diameter (mm): 560 Rotor width (mm): 1000 Drive power (HP): 100 Knsdpfop N D Tyex Ah Aof Rotor knives (pcs): 5 x 2 Stator knives (rows): 2 + 1 Hopper opening (mm): 1000 x 650 Total length (mm): 2310 Machine length (mm): 2200 Total width (mm): 1800 Machine width (mm): 1330 Height (mm): 3770

Leto izdelave: 2025, Stanje: novo, Slow-speed beside-the-press granulator GSL 300 Rotor diameter (mm): 300 Rotor width (mm): 600 Rotor speed (min⁻¹): 150 Drive (kW): 11 Number of rotor blades: 48 Number of stator blades: 2 Screen perforation (mm): > 6 Weight approx. (kg): 950 The slow-speed beside-the-press granulators of the GSL series are primarily used in injection moulding and blow moulding applications for inline size reduction of sprues and defective parts. With various hopper and extraction systems, these machines can be flexibly integrated into existing setups. GSL 300 models are also suitable as central granulators for lower throughput rates. Highlights of the GSL series: - Low noise levels due to the rotor’s low rotational speed, angled cutting action, and multi-layer sandwich construction of the sound-insulated feed hopper - Powerful and efficient drive using branded gearboxes - Easy maintenance, cleaning, and blade changes The slow-speed GSL 300 series granulators feature a 300 mm rotor diameter and working widths of 400 mm, 600 mm, and 800 mm. The rotor is directly driven via a geared motor with a bevel gear, ensuring efficient and low-maintenance power transmission and enabling the processing of demanding materials. Knodpfei Hpf Nsx Ah Ajf The low rotor speed results in reduced noise emissions and a low-dust granulate. The special rotor blades can be reground several times, and complex adjustment work is not required. The "Quick Snap" quick-release system ensures easy and rapid maintenance access. Material is fed into the mill via a noise-reducing hopper with a sandwich-type construction. Depending on application requirements, the machines can be fitted with various hopper versions. The final material size is determined by the screen perforation, with the screen located beneath the cutting chamber. The high-quality regrind produced is extracted or collected in bags or plastic containers. Optional low and high base frames are available. Applications The slow-speed GSL 300 series granulators are suitable for the size reduction of process scrap as well as large-area parts or hollow bodies. Another area of application is use as a central granulator with lower throughput rates. The robust design and high torque of the GSL 300 series also allow for the reduction of thick-walled parts.