Iztiskanje Tiska nakup rabljenega (9.848)

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Fgsdpfxsvn U S So Ah Dsh Stroke and pressure shut-off Working feed 10 mm/s

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. Fsdpfefxykpox Ah Degh 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: dober (rabljeno), Press control unit from Brankamp, removed from a used machine due to a complete rebuild of the control system. Fgodebu N N Nepfx Ah Doh Not tested, but was in use up to removal. May be suitable for spare parts or as a donor unit.

Stanje: novo, Hydraulic Cylinder Replacement Cylinder Fsdjd Hgadjpfx Ah Djgh Chamber Filter Press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP PERFECTING PRESS (1+4 COLORS) CIP3. AUTOMATIC BLANKET CHANGE, AUTOMATIC WASHING SYSTEM. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL MIXING AND PH CONTROL. AUTOMATIC COUNTERS. INCLUDES WASH-UP ROLL REWINDER. PAPER PALLET ELEVATOR. Fgjdpfx Ajtvmrbsh Djh 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. IMPRESSION COUNT: 4,600,000

Stanje: novo, Gesamthöhe 1500 mm Gesamtlänge 3000 mm 5 pneumatische Zylinder Druckluftdruck 8 bar Hub der pneumatischen Zylinder 100 mm Durchmesser der pneumatischen Zylinder 100 mm Fgsdsdpbn Aepfx Ah Doh

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Fodpfovnwfnox Ah Dogh Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Ram surface 860x620 mm Table height 900 mm Manual lever operation Pressure cut-off

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Fedpfx Asfxykwsh Dogh Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, TAULER PRINTLAM 52 Digital, letnik 2007, enostranski termalni plastifikator Maksimalna velikost pol: 550 x 740 mm Minimalna velikost pol: 200 x 250 mm Maksimalna hitrost: 35 m/min (4000 pol/uro) Primerna gramatura papirja: 130 – 450 g/m² Električne specifikacije: 380-415V, 3-fazni tok, 50 Hz, 9 kW Dimenzije: 2,75 m (dolžina) x 1,25 m (širina) x 1,7 m (višina) – Tokovno podajanje – Avtomatski podajalnik pol – Pnevmatski pritiskalni valj – Avtomatski ločevalnik pol s spustno odlagalno mizico Fedpfx Ajulgx Ijh Dogh – Upravljanje preko zaslona na dotik

Stanje: rabljeno, System: Used chamber filter press Design: Side-beam guided Filter plate size: 400x400 mm Number of chambers: 30 Fgsdpfx Aeb E A Efeh Deh Cake thickness: 25 mm Filter plates: Polypropylene (PP) Filter cloths: Optionally available, tailored to the specific medium Discharge: Open Open filtration area: approx. 7.5 m² Press capacity: approx. 90 dm³ Plate pack length: approx. 1,512 mm Filtration pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10°C / max. 50°C Plate shifting: Manual Hydraulic pump: Optional Motor voltage: 380 V Control voltage: 230 V – 24 V Accessories: Optional, according to customer requirements and machine type Safety devices: Optional Special accessories: Optional, depending on configuration Upgrades: Possible in consultation, depending on machine type Special services: Refurbishment service available upon request. Each unit undergoes a service check or general overhaul before delivery. Up to 12 months warranty provided for these units. Condition: The system is immediately operational. Purchase or rental: Inspections of the systems are possible by appointment at our premises.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP REVERSING PRESS (1+4 COLORS) CIP3. AUTOMATIC BLANKET WASHING, AUTOMATIC WASH-UP. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL PH MIXING. AUTOMATIC COUNTERS. Fjdjtvmq Njpfx Ah Djgh INCLUDES WASH CLOTH REWINDER WITH THE MACHINE. PILING ELEVATOR. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. IMPRESSIONS: 4,600,000

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Tool tryout press 150 t Clearance: 1000 mm Fodpfx Ahekw Rbae Degh Stroke: 600 mm Ram plate: 1500 mm x 1000 mm Table surface: 1500 mm x 1000 mm Front light curtain Siemens control Weight: 12.5 t

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Fgsdpfx Ajdxvfhoh Doh Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Oil tank: 300 l

Stanje: rabljeno, System: Chamber filter press, pre-owned Application area: Chamber filter press, pilot plant Design: Side-bar guided Filter plate size: 400 x 400 mm Number of plates: 15 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available as an option, matched to the specific medium Discharge: Open Filtration area: approx. 3.0 m² Press volume: approx. 37 dm³ Plate package length: approx. 700 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Pump technology: Optional Purchase or rental: Inspection of the systems at our facility can be arranged by appointment. Fodpfxeb E I T So Ah Dsgh Would you like to rent or purchase this unit? Please contact us—we are happy to assist you.

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Fgedpfx Ajdxvfpsh Deh Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Ram area: 1300 x 1100 mm Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-1, System: Chamber filter press, demonstration model – as new Operating hours: None Application areas: Chamber filter press, laboratory press, pilot plant, wine press Design: Side-beam guided Filter plate size: 250 x 250 mm Number of plates: 8 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available optionally, customized to medium Discharge: Open Filter area: approx. 0.56 m² Fedpfxob Dluwe Ah Degh Pressing volume: approx. 7 dm³ Plate bundle length: approx. 379.2 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Product-contact parts: PP & stainless steel Dimensions (L x W x H): approx. 960 x 400 x 360 mm Weight: 350 kg (photo shows identical machine) Pump system: Optional Purchase or rental: Machine inspections available by appointment at our facility. Note: Several units available. Please pre-order due to high demand. Are you interested in renting or purchasing this machine? Please contact us – we are happy to assist.

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-2, System: Chamber Filter Press – as new, demonstration model Operating hours: None Application area: Chamber filter press, pilot plant, wine press Design: Side-bar guided Filter plate size: 390x390 mm Number of plates: 14 Filter plates: Polypropylene (PP) Cake thickness: 25 mm Filter cloths: Available optionally, tailored to the medium Filtrate discharge: Open Filter area: Approx. 2.8 m² Chamber volume: Approx. 35 dm³ Fedpfx Aeb Dluyjh Dsgh Plate stack length: Approx. 391 mm Filtration pressure: Approx. 15 bar Plate shifting: Manual Frame: Steel Product-contact parts: Polypropylene (PP) + stainless steel Dimensions (LxWxH): Approx. 1695x750x630 mm Weight: 610 kg (photo shows identical system) Pump technology: Optional Purchase or rental: Inspection of the systems can be arranged at our facilities by appointment. Additional: Several units available. Please order in advance due to high demand.

Stanje: novo, Hydraulic cylinder replacement cylinder Chamber filter press Fgedped Hf Uwefx Ah Doh We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Obnovljena 12 m dolžine Fgsdpfoxfg Sbex Ah Doh Vse brezhibno V delujočem stanju. Nahaja se na sedežu podjetja.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 4.331 h, številka stroja/vozila: 24463, upogibna sila (maks.): 200 t, delovna širina: 3.100 mm, hod: 350 mm, globina grla: 450 mm, zadnji prislon: 800 mm, TEHNIČNE PODROBNOSTI Preobremenitvena sila: 200 t Razdalja med stebri: 2.550 mm Fgodpfoxgdnpox Ah Deh Izpad: 450 mm Zadnji naslon: 800 mm Največja delovna širina: 3.100 mm Maksimalni hod: 350 mm PODROBNOSTI O STROJU Krmiljenje: Delem DA-69T (krmiljene osi: Y1, Y2, X, R, Z1, Z2 + bombiranje) Dimenzije in teža Dimenzije (D x Š x V): 4.200 x 2.300 x 2.970 mm Teža: 10.000 kg Moč motorja: 18,5 kW Delovne ure: 4.331 h OPREMA Hitrovpenjalna naprava Dodatni prsti Vključeno orodje Dokumentacija CE oznaka

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1996, proizvajalec krmilnikov: Cybelec, delovna širina: 4.100 mm, stiskalna sila: 225 t, TECHNICAL DETAILS Pressure: max. 225 t Bending length: max. 4,100 mm Stroke: max. 265 mm Total power: 18.5 kW Control: Cybelec Machine weight: approx. 21,500 kg EQUIPMENT Fedpfx Ahexhd Rmo Djgh - Lower beam crowning for precise bending operations - 2 manual support arms - Two-hand foot switch

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: 10883, delovna širina: 3.550 mm, hod: 250 mm, stiskalna sila: 130 t, obratovalni tlak: 310 letvica, TECHNICAL DETAILS Press Force: 130 t Bending Length: 3,550 mm Table Width: 120 mm Frame Gap: 3,050 mm Installation Height: 510 mm Throat Depth: 320 mm Stroke: 250 mm Working Height: 900 mm Ram Speed, Unloaded: 120 mm/s Ram Speed, Full Press: 11.5 mm/s Ram Speed, Reduced: Pre-selectable Ram Speed, Upwards: 100 mm/s Control & Axes Control System: Cybelec DNC 80 Axes: Y1, Y2, X, R MACHINE DETAILS Machine Weight: approx. 12,000 kg Space Requirement: approx. 4,050 x 2,100 x 2,850 mm Operating Pressure: 310 bar Oil Capacity: 250 l EQUIPMENT Fgedpsxf Au Esfx Ah Deh - Die shifting with handwheel - 4 backgauge fingers - Hydraulic WILA punch clamping - Hydraulic AMADA die clamping - 2 support arms - Safe two-hand / foot operation - Various punches and dies

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 1.200 h, Impresora 3D de alta gama para el procesamiento de metales preciosos. DETALLES TÉCNICOS Tecnología: DMLS (sinterización selectiva por láser de metales) Volumen de construcción diámetro: 80 mm Volumen de construcción altura: 95 mm Espesor de capa: 20 µm Tipo de láser: láser de fibra Yb 100 W Escáner: escáner de alta velocidad, lente F-Theta Velocidad de escaneo: hasta 7 m/s Diámetro de haz: enfoque láser >30 µm DETALLES DE LA MÁQUINA Dimensiones y peso Dimensiones: 800 x 950 x 2.250 mm Peso: 580 kg Conexión eléctrica: 200-240 V Conexión de red: Ethernet Horas de funcionamiento de la máquina: aprox. 1.200 EQUIPAMIENTO Fgedpfsxfz Hgjx Ah Deh Software: EOS RP Tools, EOSPRINT Licencia de software para polvo de plata Micrómetro para medición de altura 3 placas de acero nuevas para impresión Al menos 4 placas de acero usadas, aún utilizables Clave USB para programas de software Nota: Se recomienda hacer un mantenimiento de la máquina antes de ponerla en funcionamiento. El fabricante ofrece este servicio por aprox. 5.000 €, incluyendo posibles piezas de repuesto.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.720 kg, obratovalna hitrost: 10.700 mm/s, širina valja: 2.200 mm, TEHNIČNE PODROBNOSTI Togi material Višina obdelovanca: maks. 50,8 mm Teža obdelovanca: maks. 34 kg/m² Material na kolutu Širina: min. 900 mm – maks. 2.200 mm Teža: maks. 50 kg Premer: maks. 240 mm Maksimalna hitrost tiskanja: 64,2 m²/h (v hitrem načinu) PODROBNOSTI O STROJU Fgjdjxdiyfspfx Ah Djh Dimenzije in teža Dimenzije: 3.080 × 2.500 mm Teža: 1.720 kg Opomba: Glave stroja je potrebno zamenjati. Prodajalec lahko ponudi celoten servis. Stroj bo na voljo od 02.12.2025!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, obratovalne ure: 20.242 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6538, stiskalna sila: 163 t, skupna masa: 25.000 kg, sila umika: 22 t, hod: 500 mm, vrsta aktuacije: hidravlični, TECHNICAL DETAILS Ram Press force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Unit Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Fjdpfexgt Tzex Ah Degh Frequency: 50 Hz Protection class: IP 54 Cooling/Filtration Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Backgauge Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: A prior inspection of the machine is strongly recommended by the seller, as the press cannot be removed from the hall in its installed condition. The seller may be able to assist in finding a specialized company for the relocation of the machine.