Izločevalniki Prahu Mobilne nakup rabljenega (881)

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), See photos! Fgsdjgny Agspfx Ah Dsh

Stanje: rabljeno, Leto izdelave: 1993, used deduster Fgodpfx Aevymgfsh Dsh Year of manufacture: 1995 Motor: 2.2 kW Extraction nozzle: 160 mm Filter surface: 20 m² Nominal air flow: 1,900 m³/h With automatic pneumatic cleaning Equipped with 2 filter cartridges and 2 dust collection bins Height: 2,500 mm Length: 2,200 mm Availability: short-term Location: Röllbach

Stanje: novo, Leto izdelave: 2025, The POWER UNIT 160 P is a certified clean air dust extractor, designed in a self-supporting, powder-coated steel sheet construction. The unit complies with the latest regulations and is certified with the BG-GS test mark according to GS-HO-07, including the H3 test mark for residual dust concentration. This allows the extractor to be installed directly in the working area without additional fire or explosion protection measures for this size category. The POWER UNIT 160 P is suitable for both single extraction points and as a supplement to a stationary system. This extractor serves as a decentralized extraction unit for universal applications with a variety of materials such as wood and engineered wood products, paper, plastics, metals, stones, and more. Its compact dimensions make it possible to use even in confined workshops. Your benefits: • Compact design • Maximum reliability • High extraction performance • Integrated pre-separator • 100% air recirculation; residual dust content < 0.1 mg/m³ • Low noise emission • Extended filter service life • Easy emptying • Ready-to-plug-in delivery • Optional rotary valve or briquetting press available Technical data: • Inlet diameter: 160 mm • Nominal motor power: 2.2 kW; 4.6 A, 3 Ph; 400 V/50 Hz • Max. air flow rate: 2,000 m³/h • Air flow rate at inlet at 20/22 m/s: 1,448/1,592 m³/h • Negative pressure at inlet at 20/22 m/s: 2,503/2,399 Pa (with loaded and cleaned filters) • Filter surface area: 9.1 m² (23 x Ø 125 mm, 1,000 mm long) • Filter cleaning: Compressed air cleaning, AL-KO OPTI-JET® • Filter material: Cat. M, antistatic, white, washable • Filter load: 159 m³/(m² x h) • Max. sound pressure level: 71 dB(A) (free-field measurement according to DIN EN 11201, measured at 1 m distance) • Chip collection volume: approx. 165 (241) liters • Electrical connections: 5 m connecting cable with CEE plug • 5-pin, 16 A with phase inverter • Compressed air supply: ½” standard plug with maintenance unit (compressed air consumption: 108 Nl / 6 bar) • Air flow monitoring: Differential pressure switch with warning light on control panel • Dimensions (L x W x H): 1,718 x 830 x 2,050 mm • Mobility: 4 plastic castors 125 mm, two are swivel-type, one lockable • Weight: approx. 340 kg • Configuration / control side: selectable right / left • Finish: RAL 7001 (silver grey) and RAL 7035 (light grey) Fgodpofydzbofx Ah Djh

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Matair welding powder dryer 100 l capacity Connection voltage: 400V, 3-phase, 50Hz 6,000 W Fgodsm Dr Szjpfx Ah Doh

Leto izdelave: 2024, Stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust Fedpfxsff Sbie Ah Djgh - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Dust extraction system, used. New fabric filters. Fsdpfx Ajwt Rhreh Dsgh Including 35 kW fan. Including control cabinet.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Multi-blade saw MEM Cobra 2MT - 2 movable couplings - Hydraulically floating saws - 2 motors, 30 kW each - Cutting height: 100 mm - Cutting width: 900 mm - 2 hydraulic pumps: 15 kW and 7.5 kW - Electronic control - 4 line lasers - High efficiency Fodpfxemv H Dqs Ah Dogh - Weight: approx. 8,000 kg

Stanje: zelo dobro (rabljeno), Primus Engineering Type: DST 350 This test facility was designed for conducting IP protection class tests "dust" according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test facility is intended for testing technical components under the influence of dust and vacuum within the limits specified in the technical data. Operation / HMI Control panel with display and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Fsdpfxort U Nuj Ah Degh Technical data: Total electrical power: Max. 5 KW Supply voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% r.h. to 75% r.h., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V-006-11, volumenski pretok: 3.300 m³/h, Naprava za odsesavanje i filtriranje za filtriranje prašine i sitnih strugotina s velikom filtracijskom površinom i velikim sabirnim vrećama. Korišteno na CNC stroju za odvod drvene prašine i strugotina. Uključen motor. Fjdpfx Ahowgb H Ee Djgh

Leto izdelave: 2023, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 2 nuovi CIMBRIA MODUFLEX F300JYMS/28 ATEX II 20/22 in vendita. Mai installati a causa di modifiche al progetto. - Progettati per il carico in uscita privo di polveri di materiali sfusi secchi. - Adatti per autocisterne, camion con pianale, vagoni ferroviari aperti e chiusi, e container. - Realizzati per prestazioni gravose, lunga durata e alta capacità. Fjdpfx Ahsvwl Rqe Dsgh - Disponibili modelli per quasi ogni tipo di prodotto sfuso secco, inclusi prodotti agricoli, materie prime e merci industriali. Disponibili anche separatamente. Per ulteriori foto, contattare.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 21 m², volumenski pretok: 3,2 m³/h, skupna masa: 770 kg, skupna širina: 900 mm, skupna dolžina: 2.360 mm, skupna višina: 2.000 mm, vhodna napetost: 400 V, raven hrupa: 67 dB, priključek za stisnjen zrak: 6 letvica, premer ekstrakcijske šobe: 200 mm, moč: 4 kW (5,44 KM), The SPÄNEX deduster type SMU 32 / 45 BA with container and discharge unit is a compact disposal station designed for commercial use and installation within the workspace. Consisting of: deduster with vacuum-tight housing, suction nozzle and backdraft damper, antistatic filter elements with jet pulse cleaning, high-performance radial fan arranged on the clean-air side with three-phase motor (energy efficiency class IE3), integrated exhaust silencer, and air outlet grille; feed container with 0.55 kW discharge unit; control unit with CEE device plug (phase inverter). The control unit is designed for automatic operation. The automatic start-up control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic start-up, either pickup coils or potential-free contacts from the machine can be used. Optional: Conversion to chip collection container € 1,270.00 net Fedpfx Aot Ug Sgjh Dogh Alternatively: Installation of a used rotary valve € 1,690.00 net

Stanje: dober (rabljeno), Delta Neu Poluclean P30 dust extraction unit Fgjdpfx Ahsihfwps Djh Manufacturer: Delta Neu Model: Poluclean P30 Type: Dust extraction unit Voltage: 400 V Power: 5.5 kW Airflow: 3500 m³/h Capacity: 95 liters Weight: 361 kg Dimensions (HxWxD): 300 x 100 x 97 cm We offer additional extraction units in various sizes—both new and used—in our shop! International shipping costs available on request!

Stanje: skoraj kot novo (rabljeno), Laser engraving, laser marking, laser welding, laser structuring, etc. 2x Ø 50 mm roof-side connections available Mobile storage device Very quiet operation Fgederypcdjpfx Ah Deh Easy filter handling, modular design Controls located on the front panel Powder-coated, robust housing Installation of extraction arms possible Airflow regulation: continuously adjustable suction power Particle filter occupancy indicator: visual signalization SUB D9 interface: standard equipment, remote I/O, operation message, filter 100% Dimensions (W x D x H): approx. 1400 x 1200 x 2000 mm Weight: approx. 35 kg

Stanje: dober (rabljeno), Leto izdelave: 2009, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-type TEKA AIRTECH P24 The primary application areas for these systems are industrial plants and welding shops where spot extraction is not feasible or where spot extraction alone is insufficient to maintain clean air in the facility. Laterally mounted channels with pick-up points capture contaminants from the air and direct it to the filtration section. Here, impurities in the form of fine particles accumulate on the surface of the cartridge filter. A pulse of compressed air automatically cleans the cartridge filters at intervals as needed. When the compressed air is released, particles collected on the filter surface are detached and fall into the dust container. Clean air is then returned to the workspace via individually adjustable long-range nozzles. Simultaneously, the output of clean air directs contaminated air from the hall toward the extraction channels. The filter is cleaned during operation by a microprocessor-controlled compressed air pulse system, ensuring high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Fgjdol Dw U Djpfx Ah Deh The AIRTECH series devices are IFA certified in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a fixed local extraction unit for welding fumes. Specifications: - Airflow capacity: 24,000 m³/h - Motor power: 15 kW - Fan housed in a soundproof enclosure - Control cabinet with electrical documentation Year of manufacture: 2009 Dimensions: - Height: 6.80 m - Base dimensions: 1.95 m x 1.90 m - Overall width: 3.60 m x 2.00 m We have several units available. Price indicated in the listing is per unit.

Stanje: delavnici obnovljeno (rabljeno), Rated motor power: 2.2 kW / 5.2 A Rated voltage: 380 V / 50 Hz / 3-phase Fgodpfx Aev Azcyoh Doh Rated air flow: 1350 m³/h Rated negative pressure: 2850 Pa Main switch + start and stop Manual filter cleaning Extraction nozzle: 140 mm 1 container, diameter 800 mm

Stanje: dober (rabljeno), Leto izdelave: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-type TEKA AIRTECH P18. Main application areas for the system include industrial plants/welding shops, where spot extraction is not possible or where spot extraction is insufficient to maintain air cleanliness in the hall. Side-mounted ducts with extraction points capture contaminated air and direct it to the filtration section. Here, contaminants in the form of fine particles cover the surface of the cartridge filter. A compressed air pulse automatically cleans the cartridge filters at required intervals. When the compressed air pulse is applied, particles collected on the filter surface are dislodged and fall into the dust collection bin. The cleaned air is returned to the workspace via individually adjustable long-range nozzles. At the same time, the flow of clean air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller using compressed air pulses during operation, resulting in high unit efficiency. Low demand for compressed air due to the "Power-Spray" system. The AIRTECH series devices are IFA certified in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as permanent, local exhaust ventilation devices for welding fumes. Specifications: Fgjdpeib Dadjfx Ah Djh Capacity – 18,000 m³/h Motor power – 11 kW Vacuum – 2,250 Pa Filtration area – 324 m² (9 filter cartridges at 36 m² each) Fan in soundproof enclosure Control cabinet with electrical documentation Noise level – 72 dB Year of manufacture – 2010 Dimensions: Height – 5.00 m Base width – 1.44 m x 1.44 m Total width with outlet ducts – 8.5 m Total weight – approx. 2,400 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Nominal volumetric flow rate V_nom 750 m³/h, extraction nozzle D=100 mm, minimum volumetric flow rate V_min 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, rated speed 2860 rpm, connection 380V 3Ph 50Hz Fodpfx Aov Azfzeh Degh

Leto izdelave: 2019, Stanje: dober (rabljeno), Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 The filter is cleaned via a microprocessor-controlled compressed air pulse system during operation, ensuring high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central filter ventilation unit, Filtercube, equipped with cartridge filters, provides an ideal solution for almost all challenges in fume and dust filtration. The fan is located on the clean air side, which minimizes explosion risk. Applications: - Central extraction system for multiple welding booths - Extraction system for welding robots - Extraction system for thermal cutting tables and grinding stations - General hall ventilation filtration (push-pull, displacement systems) - Extraction in combination with extraction tables - Extraction for grinding of non-explosive materials Specification: - 5.5 kW fan motor - Capacity: 3800 m³/h - Vacuum: 3250 Pa - Inlet diameter: 250 mm - Filter area: 100 m² - Equipped with "DUST-VAC" unit, which automatically transfers dust to a separate container - Option to order new filter cartridges tailored to specific customer needs - Complete technical documentation included. Fgsdpfxjnyhvqo Ah Doh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 91233, Connected load 380V 2.2kW Design type B1 Nominal air flow rate 1500 m³/h Dimensions (H x W x D): 1950 x 800 x 1200 mm Fedpfx Aek T At Ieh Degh Suction connection 140 mm Mobile

Leto izdelave: 1993, Stanje: rabljeno, Dust extraction unit, water-based vacuum filter, separator for grinding, polishing, cutting, brushing, and deburring stone, gypsum, aluminum, and metals. An ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring low maintenance costs. It is the perfect solution for cutting, grinding, brushing, and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to the built-in heater, which prevents water from freezing. Fgsdotixlbopfx Ah Dsh Brand: Venti Oelde Model: RWA 400 Fan: 15 kW Capacity: 8,000 m³/h Year of manufacture: 1993 Inlet diameter: 400 mm Control cabinet with complete technical documentation included.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-28/2018, nazivni pretok: 2.500 m³/h, skupna širina: 750 mm, skupna dolžina: 2.000 mm, skupna višina: 1.980 mm, priključek za stisnjen zrak: 6 letvica, moč: 3 kW (4,08 KM), SPÄNEX dust extractor, model SMU 25 Connected load: 380V, 5.6A, 3kW Weight: approx. 400 kg Mobile design Extraction nozzle: 180 mm Nominal airflow: 2,500 m³/h Operating mode: manual/automatic Electro-pneumatic filter cleaning Pneumatic connection: 6 bar Dimensions (HxLxW): 1980 x 2000 x 750 mm Fsdjtwp Nzspfx Ah Degh

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1995, Connected load 380V 2.2kW Suction nozzle 200 mm Mobile 2 x chip collection bins, each 190 l Airflow rate 2500 m³/h Fgsdpjvz Uhysfx Ah Dsh Dimensions (H x W x L): 2160 x 830 x 1900 mm

Stanje: rabljeno, Power connection: 480V, 4kW Filter surface area: 15.8 m² Nominal air flow: 3,200 m³/h Minimum air flow: 2,262 m³/h Extraction connection: Ø 200 mm Weight: approx. 550 kg Fedpfjvz U Srox Ah Dogh Dimensions (LxWxH): 2,400 x 900 x 2,100 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2433331633, Power supply: 380V, 1.5 kW, 3.5 A Filter bag category: G Mobile version Extraction port diameter: 100 mm Nominal volumetric flow: 770 m³/h Weight: approx. 97 kg Cable with 16A plug Fjdpfx Ahsh U A Smj Dogh Unfortunately, we are unable to respond to inquiries without complete contact details.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 200642, volumenski pretok: 3.200 m³/h, RIEDEX – Dust Extractor Model DM-200/M-B Maximum airflow: 3,200 m³/h Motor power: 4.0 kW Without extinguishing system Left-hand version Fgjdotwz Hlspfx Ah Dsh Automatic (motorized) filter cleaning Supplied with chip collection bins