Ism 4 nakup rabljenega (33.212)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 2.200 mm, dolžina rezanja (maks.): 4.200 mm, premer žaginega lista: 250 mm, V ponudbi imamo vertikalno žago Format 4 Kappa V60, kupljeno kot razstavni eksponat. Naprava je bila pri nas le občasno v uporabi kot rezervna ali za dopolnitev zmogljivosti. Naprava je v zelo dobrem stanju. Vabimo vas k kontaktu. Moč motorja: 4,5 kW (6,0 KM) - Dolžina reza: 4200 mm - Globina reza: 60 mm - Višina reza: 2200 mm - Leto: 2017 Kedoxg Ecnopfx Ah Aefa Naveden je neto cena.

Stanje: rabljeno, Leto izdelave: 2011, Technical details: Power: 63 kVA Speed: 1500 rpm Kedpfsu Nvp Ssx Ah Aefa Power output: 50 kW (heat exchanger) Fuel type: (natural) gas Operating hours: 87,021 h Weight: approx. 2,300 kg Dimensions L x W x H: approx. 3.0 x 1.0 x 1.8 m CHP Compact Module (Heat Exchanger Module) Sound-insulated, with control cabinet Engine: MAN; Type E0834 E302; Gas Otto 4-stroke engine, 1500 rpm; Mechanical output 54 kW; Ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; Type LSA 43.2 8; Rated output 87 kVA; 1500 rpm; Voltage 400V Heat exchanger module: Make: Heattransfer; Engine cooling water output 46 kW; Exhaust heat output 33 kW; Total heat output via plate heat exchanger = 79 kW Connections for gas inlet, exhaust outlet, condensate drain, and heating water on the side. With exhaust adapter

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 2.640 h, Funkcionalnost: popolnoma funkcionalen, moč: 44 kW (59,82 KM), potreba po zraku: 2.150 m³/h, Pos. 10 Description: Mobile Suction Unit VacTrailer S-4 Diesel Kubota diesel engine 44 kW Rotary lobe vacuum pump Max. air flow rate: 2,150 m³/h Max. vacuum: 500 mbar Collection capacity: 500 liters Bag filter: 12 m² Pneumatic AirShock® filter cleaning Safety cartridge filter 7.5 m², dust class M Design B1, ignition source-free construction Pos. 20 Description: Painting of the suction unit Color: Wieland Blue, similar to RAL 5015 Pos. 30 Description: BigBag securing system With hooks and lashing straps (35 mm) for securing BigBags (not suitable for lifting) Pos. 40 Description: Mounting device for BigBags For fitted slide gate valve on the filter separator, including venting device Pos. 50 Description: Slide gate valve DN 300, manually operated Suitable for free-flowing or crumbly suction material Pos. 60 Supports for filter separator (2 pcs.) Required for payload over 800 kg up to max. 1,200 kg Incl. support holders integrated in trailer frame Pos. 70 Trailer for road use (2,500 kg) 100 km/h approval, height-adjustable drawbar, tandem axles, galvanized frame Removable lighting bar, 12/24 V electrical connection, eyelet and ball couplings Pos. 80 Installation of the suction unit on trailer Incl. TÜV inspection, 2-stage adjustable rear supports Pos. 90 Control extension for level indicator For connecting a mobile pre-separator, including Harting socket on S4 control system Pos. 100 Short connecting piece, galvanized steel 1 × DN 125 SK-M / 1 × DN 100 SK-V Pos. 110 Bag filter, polyester needle felt Membrane-coated, 6 m², 9 bags Kfsdpfx Ajxn Ru Seh Aoa Pos. 120 Fine filter cartridge, dust class M Filter surface 7.5 m² Pos. 130 Description: Electric hydraulic system Electric hydraulic pump with all control units For raising and lowering the collection container For opening and closing the discharge slide gate valve

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Cena je za vse skupaj. Idealno za nov začetek v sitotisku Umetniški studio Umetniki Ksdpfx Ajxwnw Ajh Asfa Set vsebuje: 1. SITOTISKARSKI KARUSEL tip X, 4 MIZE, POPOLNOMA NASTAVLJIV 2. SUŠILEC: TROFAZNA NAPAJANJA 3. FLASH AVTOMAT: TROFAZNA NAPAJANJA VSE JE NOVO, SAMO ODPAKIRANO.

Stanje: zelo dobro (rabljeno), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Was mounted on a VTC 300, now for sale due to upgrade to a new 5-axis machine. Kedpfxep U Umkj Ah Aefa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 770 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 6.800 kg, vhodna napetost: 230 V, skupna višina: 2.300 mm, skupna širina: 12.300 mm, skupna dolžina: 11.900 mm, nazivna moč: 5,5 kW (7,48 KM), sekundarna napetost: 400 V, število prejšnjih lastnikov: 1, priključek za stisnjen zrak: 6 letvica, Število orodnih revolverjev: 4, Oprema: CE označba, dokumentacija / priročnik, Automatische productielijn voor houten tuinschermen – Custom made -- Deze op maat gemaakte productielijn is ontworpen voor het volledig geautomatiseerd vervaardigen van houten tuinschermen uit losse planken. Zowel de schermplanken als de tussenlatten worden handmatig ingevoerd in daarvoor voorziene magazijnen, waarna de machine het productieproces volledig automatisch uitvoert. - Automatische afvoer en stapeling van de afgewerkte tuinschermen - Kantelbare stapels voor efficiënte verwerking - Instelbaar voor 5 verschillende schermtypes - Laatste onderhoud: juni 2025 - Documentatie beschikbaar: gebruikershandleiding, sparepart-lijst, technische tekeningen -Extra toebehoren beschikbaar voor alternatieve schermtypes Wij verkopen deze machine wegens een heroriëntatie van onze bedrijfsstrategie. Ze verkeert in uitstekende staat, is volledig functioneel en direct inzetbaar. Kfedexu A Udopfx Ah Aoa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Tehnični podatki Višina reza navpično: 2.200 mm Višina reza vodoravno: 2.080 mm Priključek za odsesavanje: 2 x 100 mm Širina [mm]: 1.700 mm Višina: 3.000 mm Dolžina [mm]: 6.570 mm Moč motorja: 7,5 KM (5,5 kW) Napetost motorja: 3 x 400 V Premer žaginega lista: 300 mm Ksdpsud Sk Sjfx Ah Aofa Dolžina reza: 5.300 mm Globina reza: 80 mm Digitalni prikaz za horizontalni in vertikalni rez Leto izdelave: 2010 Neto cena: 11.190

Stanje: dober (rabljeno), 4 x 4000 litrov rezervoarji za smetano Kfjdpsx Ap T Ajfx Ah Aoa S plaščem in strgano površino

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: novo, Leto izdelave: 2020, Model: KPZ-2 Type: Enclosed Working dimensions: 900 mm (W) x 1300 mm (H) x 900 mm (D) External dimensions: 980 mm (W) x 2100 mm (H) x 1600 mm (D) Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter surface area: 22.5 m² Fan: Aluminium Fan noise level: 74 dBa Air consumption: 10,200 m³/h Ksdpfx Aob Al Sbeh Ajfa Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available on request

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Original packaging Features and technical data: Tiltable circular saw unit 90-45° Saw blade diameter: 250–450 mm, max. cutting height: 155 mm, electric height adjustment Electrically adjustable tilt with digital display for height and angle Crosscut fence 3200 mm tiltable 90–45°, 2 fence jaws Machine stand: kappa 450, circular saw table made of cast iron, operating tools Ksdew Nadaopfx Ah Ajfa 3 speeds: 3500/4500/5500 rpm, 50Hz Electrics for panel saw: 3x400V, 5.5 kW (7.5 HP) S6, SD Start, CE-compliant with brake Cutting width: 1250 mm Upper guard cutting width 1250 mm, guard for 90° and guard for miter cuts, both height-adjustable and can be swung out of the working area. Saw blade diameter: 450 mm, extraction port D-100 mm Rip fence with digital display and automatic length compensation when saw blade is tilted, fence rail length 1200 mm, can be swung away Sliding table cutting length: 2800 mm, anodized, edging shoe (W-Alu/An-Grey), 10-year Felder warranty on "X-Roll", the Felder sliding table guide system! Outrigger 1250x650 mm, X-Roll with movable support rail and digital angle display, cutting length 2800/3200 mm Availability: Immediately Location: Flörsheim Sale on behalf of customer

Stanje: rabljeno, Diameter various Quantity 40x Kfsdpfx Ahjww Nblo Aja Holder BT 40

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Kfodpfjd Tqaljx Ah Asa - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, višina police: 3.500 mm, dolžina opore: 2.700 mm, dolžina police: 8.500 mm, višina okvirja: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Kfjdpfxov Ukz As Ah Asa Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: zelo dobro (rabljeno), • Proizvajalec: ABUS KG – Nemčija • Tip: K-300 1-4 • Moč motorja: 3,8 kW • Napajanje: 400 V / 50 Hz • Opremljen z elektromagnetno zavoro – zavorni moment 90 Nm • Zobati gred – premer cca 34 mm • Pritrditev: kvadratni prirobnik • Robustna industrijska zasnova, namenjena delu v ABUS mostnih žerjavih in vitlih • Stanje: rabljen, delujoč (prave slike) Kjdpfexbfutex Ah Aefa

Stanje: novo, Hardfacing electrode Brand: Duramit W4 Material: 1.2567 Kjdpfohhyitox Ah Aofa Diameter: 6 mm Length: 450 mm 40 pieces per package 6 packages available €95 per package

Stanje: rabljeno, Leto izdelave: 2016, Used machine Cross-sanding automatic machine Year of manufacture: 2016 Product Advantages Beneath perfectly painted, stained, or oiled wood surfaces, there is always a perfectly sanded area! Felder sanding machines are distinguished by solid construction, state-of-the-art machine technology, and maximum productivity. Key highlights at a glance: - Sanding width: 1350 mm - Sanding thickness: 3–170 mm - Combined superfinish unit - Touchscreen control for work processes - The Felder operating concept ensures maximum process and work safety Your benefits at a glance: Time savings - Motorized adjustment of the contact roller in 1/100 mm increments from the control panel - Innovative unit arrangement for pre-sanding and fine sanding of veneered workpieces - Brush units at the machine outfeed - Lacquer sanding as optional additional equipment Convenience Kfedpew I Uv Usfx Ah Asa - Fixed feed table height (upper part of the machine is adjusted) - Touchscreen control with clear image display and program memory - Machine data acquisition for sanding belt wear and more - Tool-free handling when changing sanding belts - Large foldable table extensions for heavy workpieces Flexibility - Units for calibration, fine sanding, or lacquer sanding - Infinitely variable feed speed up to 20 m/min via inverter Innovation - Electronically segmented sanding shoe with silicone technology for minimal air consumption - Combined superfinish unit incl. chevron glide belt to compensate for oscillation marks Quality - Heavy-duty machine construction - Durable machine components Standard features Control system: finish 1350 classic Control unit with 7" touch color display, 100 program storage spaces, maintenance interval notifications Plain-text error messages Amperemeter for load monitoring Feed table - Fixed infeed height – stationary table, 900 mm - Electric height adjustment of units including fine adjustment from the control panel - Infinitely variable feed speed from 2.8–20 m/min adjustable by inverter from the control panel - Hand guard and workpiece overthickness protection - Workpiece detection sensor with 25 sensors, 55 mm segment width - Endless honeycomb structured belt conveyor - Automatic feed belt centering Cross sanding unit finish 1350C high gloss - Segmented, electronically-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Chevron glide belt between sanding pads, sanding belt for homogeneous sanding without oscillation marks - Variable pressure regulation on the control side - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety - 1 motor with 7.5 kW (10 HP) - Star-delta starting - Cleaning blower with timer control - Cutting speed 12 m/s - Sanding belt 140 x 4560 mm Combined superfinish unit 1350C: - Rubber, grooved contact roller with 85–90° Shore hardness and 142 mm diameter - Electromotorically positioned grit compensation - Segmented, electro-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Variable pressure regulation on the control side - Chevron glide belt between sanding pad and sanding belt for homogeneous finish without oscillation marks - Mechanically preloaded rubber pressure rollers - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level. Kodpsfdkb Tefx Ah Aofa

Stanje: novo, Hardfacing electrode Brand: Duramit W4 Material grade: 1.2567 Diameter: 3.25 mm Length: 350 mm 120 pieces per package Kfjdpfshhyizox Ah Aja 2 packages available 95 euros per package

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Kodpfx Ahjfdkb Uo Aefa Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard Kedpjfdkbhefx Ah Aefa - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Kodpfx Ahsd Tbbdo Ajfa Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: Kodpfxeguk Dko Ah Aofa - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards Ksdpfx Ahsguk Dvj Aofa - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) Kjdpfx Ahsguk A He Aefa - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.