International 5100 nakup rabljenega (9.498)

Leto izdelave: 1964, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Dusdpfxjt Dv I Aj Afaeu Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI6DT Machine no.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Duodpfxjgyd Svj Afasu Rated current: 15 A Connected load: 4 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW Dodpfogyd S Dsx Afaeuu The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1960, stanje: nepreverjeno (rabljeno), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Dusdpfjhu E Egox Afaeu Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Dsdpehu E N Dsfx Afajuu Technical data: Manufacturer: Forst Model: RF 16 Max. pulling force: 16 t Max. stroke: 1200 mm Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Note: Control valve is missing

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), številka stroja/vozila: 60305, General / Technical Data: Duodpsiqkb Rofx Afaju Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Maximum workpiece diameter: Ø approx. 900 mm Table aperture: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor, without attachments) Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: – Electric clamping jaw sensing system (tool removal monitoring to prevent unintended return of the pull bridge) – Integrated coolant system with non-return valve and drain cock – Patented coolant/lubricant swivel system (retrofitted) Remarks: The machine bears the manufacturer’s CE marking. The machine is powered in our warehouse and available for inspection.

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: Dedpfx Afjlpadyeajuu High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: Duodpfxjiw Dlks Afaeu The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. Djdpfxotuuvze Afaouu The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1980, stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm Dedpfocdtpljx Afaouu max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Leto izdelave: 1960, stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Dodpfoui Sbjx Afasuu Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Leto izdelave: 1959, stanje: rabljeno, max. pressing force: 16 t Dsdpo Rwa Uefx Afaeuu max. stroke: 1250 mm cutting speed: 5.6 m/min return speed: 30 m/min

Leto izdelave: 1956, stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 Duodpfxsdbmgme Afaju General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1951, stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Dedpfedcdrpjx Afajuu Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Duedpfx Afjdffzfeasu Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1958, stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Duodpfxeda Ugie Afaju Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Leto izdelave: 1972, stanje: rabljeno, Max. pulling force: 10 t Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Dusdpfx Ajcdtnhjfaeu Broaching stations: 3 units Passage width: 470 mm Distance between broaching stations: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via permanent magnet chip conveyor 1 hydraulic system, 1 work platform, electric-hydraulic shank and end-piece holder confirmation, automatic loading device

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Swing diameter: 400 mm O F F E R We can offer you the following, subject to prior sale and errors, ex stock, without obligation: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Face Grinding Device Type: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external cylindrical grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with / without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swiveling max.: 30° Workpiece headstock cross adjustment, max.: 400 mm Grinding spindle stock r-feed: 70 mm Grinding spindle stock cross adjustment, approx.: 100 mm Grinding head infeed, automatic intervals: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table stroke, max.: 630 mm Table speed infinitely variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle stock adjustment on table: 520 mm Duodoxyllvjpfx Afaou Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or more diameters, external cylindrical grinding and narrow face grinding • Face grinding device, hydraulically swiveling, with automatic cycles for grinding single and multiple face surfaces as well as stepped faces simultaneously • Electronic program control with large operating panel and ampere meter for both grinding spindles • Belt-driven grinding spindle drive with built-in grinding spindle and 5 separate, interchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Extensive accessories including 4-jaw faceplate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel mounts, foot switch • Separate hydraulic unit, mounted control cabinet, coolant system with magnetic separator Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, available immediately, FCA Metzingen Payment: Net - upon receipt of invoice

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Dodpjurw Uysfx Afajuu Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Oddelek 5100 (2023) Duedpfev R D Nljx Afaju

Stanje: dober (rabljeno), Specifications: Manufacturer: Interroll Condition: Good (used) Clamping length: 610 mm Dsdsfgvwnjpfx Afaouu Roller length: 600 mm Roller diameter: 60 mm Rollers with internal thread Material: Steel Stock: 32 units Price per unit Tailor-made solutions for your intralogistics Whether you are looking for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to prepare a custom quotation for you or advise you on planning and installation questions. Simply let us know your requirements and on-site conditions. Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in various industries such as logistics, pharmaceuticals, crafts, or the electronics sector. Together, we will work out ways to optimize your workflow and material flow in a cost-effective and sustainable manner. We can even supply fully automated sorting technology or supplementary components such as picking racks or containers.

Leto izdelave: 2014, stanje: dober (rabljeno), številka stroja/vozila: 2014-1313, Offer 22651 Technical Data: - Mobile design with motorized forward and reverse travel, including steering Duedpfoi Apb Nox Afaeu - Motorized sanding stroke, forward and reverse, with adjustable speed - Longitudinal sanding stroke, forward and back - Motorized contact pressure – adjustable sanding pressure - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel: width 60 mm / diameter 300 mm - Pneumatic connection: 6 bar - Drive: 400 V / 2880 rpm / 7 kW - Space requirement approx.: W 5700 x H 1200 x D 1400 mm - Weight approx.: 800 kg

Stanje: rabljeno, Leto izdelave: 1952, Maksimalni hod 220 mm Duedpfx Afjyn R Nwsaou Dodatki: da Teža stroja pribl. 1,4 t

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: 20, Used CNC internal broaching machine Manufacturer: FORST Model: RISH 63X1000X320 Duodjv Htluopfx Afasu Year of manufacture: 1999 / Overhauled Machine no.: 20

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 018.0179.90.035, (Please state your offer price) Djdpfoyh R Uwjx Afajuu Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.