Intern nakup rabljenega (8.860)

Stanje: zelo dobro (rabljeno), Mitutoyo internal micrometer (28577) Model 511-167 Podsvu T Apjpfx Aczopl Measuring range: 18 - 35 mm

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Premer brušenja: 6mm–150mm, maks. pomik brušenja: 125mm, nihajni premer nad mizo/s pokrovom: 600mm/260mm, pomik X/Z: 500mm/170mm, hitro pomikanje: 10m/min, delovni pomik: 10m/min, ločljivost X/Z: 0,0001mm, hitrost vretena obdelovanca: 850obr/min. Dimenzije stroja X/Y/Z: pribl. 2550mm/3100mm/1800mm, teža: pribl. 2600kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Stroj se nahaja na Kitajskem. Pedjxf Ikfjpfx Aczjpl

Stanje: dober (rabljeno), Made in Germany Smallest economically grindable bore: 6 mm Largest grindable bore: 50 mm Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Swivel angle of the workpiece spindle casing to one side: 10 degrees Maximum table feed speed, hydraulically infinitely variable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Ppjdpeda A Eijfx Aczol Power requirement: approx. 8 kW Net weight of the machine: 2,000 kg

Stanje: rabljeno, Internal grinding machine VOUMARD 5S Ppodju Hac Dopfx Aczel

Stanje: rabljeno, TECHNICAL DATA - Max. grinding length: 500 [mm] - Max. grinding diameter: 3000 [mm] EQUIPMENT Ppodsu Hac Rspfx Aczol - 1 grinding spindle, 12,000 [rpm] - Retractable grinding wheel dressing device - Coolant tank with pump and paper filtration

Stanje: rabljeno, TECHNICAL DATA - Grinding length: 120 mm - Centre height: 102 mm - Travel paths (X/Z): 450 x 200 mm - Rapid traverse speeds (X/Z): 12 m/min SPINDLE SUPPORT - Number of spindles: 2 WORKPIECE SPINDLE HEADSTOCK - Max. speed of workpiece spindle headstock: 1500 rpm - Spindle bore: 28.6 mm - Power: 1.4 kW - Taper: A2.4/CM5 - Torque: 150 Nm - Manual B-axis angle: +/- 2° - C-axis: 0.0001° SUPPLY - Installed power: 34 kVA DIMENSIONS - Footprint: 3600 x 2800 mm - Weight: 2600 kg MACHINE HOURS - Power-on hours: 26,781 h ACCESSORIES - Fanuc Oi-TD control - Coolant supply through the spindle centre - Cooling unit for spindle cooling - Workpiece loading robot - 2 spindles available: 59,600 - 41,600 rpm Ppedpfx Ajuhbmqeczol - Dressing turbine

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, with documentation, on-site inspection possible. Pedpfxsqzkdme Aczjpl

Stanje: rabljeno, Leto izdelave: 1973, small/large grindable bore 8 / 10 mm maximum grinding depth for internal grinding 150 mm swing diameter 450 mm workpiece spindle bore 35 mm maximum swiveling 30° table longitudinal movement min./max. 5 / 150 mm/min Internal Grinding Machine | JUNG - D14 The machine is in well-maintained condition. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ppedpfx Acst Rlgujzol #Tags: D-14 | D 14

Stanje: novo, Hydraulic Thread Cutting Machine Easy Tap ETH 24 Thread Diameter up to M 24 Speed 0 – 600 rpm Thread Sizes M 5 – M 24 Working Range 2050 mm max. Working Height 920 mm Table Surface 900 x 700 mm Ppsdpfxstbawkj Aczol Oil Capacity 100 litres Motor Power 3.0 kW Weight: 220 kg Equipment: • Hydraulic thread cutting machine • Includes machine base frame with clamping plate • Mobile (on wheels) • Hydraulic pressure gauge • Infinitely variable speed adjustment from 0 – 600 rpm • Vertical and horizontal threading possible • Special accessories included / Quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Leto izdelave: 1962, Stanje: dober (rabljeno), številka stroja/vozila: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Mounting diameter for draw heads: 3 x Ø ___ mm Podjt Dwb Depfx Aczopl Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Electrical connection / Power supply: 380 Volt, 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tool clamping system is designed for spring-actuated locking in both the drawbridge and the feeder. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production. For optimum operation, a foundation (pit) or optionally a platform is recommended. Draw heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Ppedpfocc D Ddex Aczol Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Leto izdelave: 1981, Stanje: dober (rabljeno), Manufacturer: National Broach Model: GHC 12" Year of manufacture: 1981 Pjdpfxjhad Avj Aczopl Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Pedpfogyd T Esx Aczspl Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Leto izdelave: 1964, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Ppodpfjt Dv I Aex Aczel Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 60305, General / Technical Data: Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Maximum workpiece diameter: Ø approx. 900 mm Table aperture: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor, without attachments) Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: – Electric clamping jaw sensing system (tool removal monitoring to prevent unintended return of the pull bridge) Ppodpfxeiqkb Ro Aczol – Integrated coolant system with non-return valve and drain cock – Patented coolant/lubricant swivel system (retrofitted) Remarks: The machine bears the manufacturer’s CE marking. The machine is powered in our warehouse and available for inspection.

Leto izdelave: 1960, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI6DT Machine no.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW Ppjdegyd Svepfx Aczel The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Podsgyd S Dopfx Aczjpl Weight: 3.2 t Broaching force: 8,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1960, Stanje: nepreverjeno (rabljeno), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Pedpfxshu E Egs Aczjpl Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Technical data: Manufacturer: Forst Model: RF 16 Pedpfxjhu E N Ds Aczjpl Max. pulling force: 16 t Max. stroke: 1200 mm Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Note: Control valve is missing

Leto izdelave: 1965, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability. Ppodpfxetuuvze Aczsl

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse. Podsiw Dlkepfx Aczopl

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Psdpfjlpadyjx Aczjpl Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1960, Stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417). Ppjdpfx Acoui Sbszol

Leto izdelave: 1959, Stanje: rabljeno, max. pressing force: 16 t max. stroke: 1250 mm cutting speed: 5.6 m/min return speed: 30 m/min Pedpfe Rwa Ujx Aczopl

Leto izdelave: 1980, Stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor Pjdpecdtplefx Aczepl