Intern nakup rabljenega (8.914)

Stanje: rabljeno, Εξωτερική/Εσωτερική Κυλινδρική Τριβή GENDRON RU 28.100 Μεταξύ κέντρων: 1000 mm Μέγιστη διάμετρος λείανσης: Ø 290 mm Περιστροφή τσοκ εργαλείου: από 70 έως 370 σ.α.λ. Τσοκ 4 σιαγόνων Ø 200 mm Τροχός λείανσης: Ø 300 mm Αυτόματο πέρασμα βύσματος Περιστρεφόμενο τραπέζι Iodpfsxqqklsx Adkeap Εξωτερική υδραυλική μονάδα Εξωτερική δεξαμενή λιπαντικού Τάση: 380 V Διαστάσεις (Μ x Π x Υ): 3000 x 1900 x 2000 mm Βάρος: περ. 3 τόνους

Leto izdelave: 2014, stanje: dober (rabljeno), številka stroja/vozila: 2014-1313, Offer 22651 Technical Data: Iedpfx Aji Apb Njdkeap - Mobile design with motorized forward and reverse travel, including steering - Motorized sanding stroke, forward and reverse, with adjustable speed - Longitudinal sanding stroke, forward and back - Motorized contact pressure – adjustable sanding pressure - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel: width 60 mm / diameter 300 mm - Pneumatic connection: 6 bar - Drive: 400 V / 2880 rpm / 7 kW - Space requirement approx.: W 5700 x H 1200 x D 1400 mm - Weight approx.: 800 kg

Stanje: rabljeno, Leto izdelave: 2005, Tip honalnega stroja Krmiljenje Nagel Iedsxwdxiopfx Adkoap Stroj je po naši oceni v dobrem rabljenem stanju in si ga je mogoče po dogovoru ogledati pod napetostjo. Na voljo sta 2 stroja. Pribor, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, CNC NUM machine rebuilt in 2002 front device Iaodst E N Dmjpfx Adkop maximum grinding diameter: 200 mm, maximum grinding stroke: 200 mm maximum through diameter: 500 mm weight: 4,500 kg

Stanje: rabljeno, Internal grinding machine VOUMARD 5S Iaedsu Hac Depfx Adkop

Stanje: rabljeno, TECHNICAL DATA Iaedpfxju Hac Rj Adkjp - Max. grinding length: 500 [mm] - Max. grinding diameter: 3000 [mm] EQUIPMENT - 1 grinding spindle, 12,000 [rpm] - Retractable grinding wheel dressing device - Coolant tank with pump and paper filtration

Stanje: rabljeno, TECHNICAL DATA - Grinding length: 120 mm - Centre height: 102 mm - Travel paths (X/Z): 450 x 200 mm - Rapid traverse speeds (X/Z): 12 m/min SPINDLE SUPPORT Iaedpfeuhbmqox Adksp - Number of spindles: 2 WORKPIECE SPINDLE HEADSTOCK - Max. speed of workpiece spindle headstock: 1500 rpm - Spindle bore: 28.6 mm - Power: 1.4 kW - Taper: A2.4/CM5 - Torque: 150 Nm - Manual B-axis angle: +/- 2° - C-axis: 0.0001° SUPPLY - Installed power: 34 kVA DIMENSIONS - Footprint: 3600 x 2800 mm - Weight: 2600 kg MACHINE HOURS - Power-on hours: 26,781 h ACCESSORIES - Fanuc Oi-TD control - Coolant supply through the spindle centre - Cooling unit for spindle cooling - Workpiece loading robot - 2 spindles available: 59,600 - 41,600 rpm - Dressing turbine

Stanje: dober (rabljeno), Made in Germany Smallest economically grindable bore: 6 mm Largest grindable bore: 50 mm Iodpfxsda A Eie Adkoap Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Swivel angle of the workpiece spindle casing to one side: 10 degrees Maximum table feed speed, hydraulically infinitely variable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Power requirement: approx. 8 kW Net weight of the machine: 2,000 kg

Stanje: rabljeno, Leto izdelave: 1983, Internal diameter min / max: 10 / 250 mm Grinding depth: 400 mm External diameter max.: 380 mm Swing diameter: 390 mm Table travel max.: 550 mm Table stroke min.: 2 mm Rapid traverse: 10 m/min Table speed - stepless: 0 - 10 m/min Coarse adjustment: 18 mm Fine adjustment: 4 mm Max. workpiece weight: 100 kg Spindle head: B 6 DIN 55021 Spindle speeds - stepless: 15 - 1,500 rpm Swivel angle max.: +/- 30 degrees Spindle bore: 50 mm Drive power: 2 kW Rapid feed: 0 - 250 mm/min Stroke: 70 mm Drive power: 3 kW Machine weight approx.: 2.7 t Space requirement approx.: 3.0 x 3.0 x 3.2 m Internal grinding machine BAHMÜLLER - JES 12 Iaedpfxevprxfj Adksp - new control system (July 2015)

Stanje: rabljeno, Leto izdelave: 1971, globina brušenja: 150 mm, premer brušenja: 80 mm, notranji premer: 80 mm, Proizvajalec: OVERBECK Model: 250 I Iedpfx Aou Ef Dqodkeap Leto izdelave: 1971 Premer vpenjanja obdelovanca: max. 140 mm Dolžina vpenjanja: max. 150 mm Dolžina brušljive izvrtine: 150 mm Premer izvrtine: max. 80 mm Ravna brusilna enota ročno zložljiva Rezervoar za hladilno tekočino s črpalko Brez brusilnega vretena in pogonskega motorja Nazadnje uporabljena s pnevmatskim vretenom Teža: ca. 1400 kg

Stanje: rabljeno, Leto izdelave: 1973, small/large grindable bore 8 / 10 mm maximum grinding depth for internal grinding 150 mm swing diameter 450 mm workpiece spindle bore 35 mm maximum swiveling 30° table longitudinal movement min./max. 5 / 150 mm/min Internal Grinding Machine | JUNG - D14 Iaedpfxot Rlguj Adkop The machine is in well-maintained condition. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Leto izdelave: 1981, stanje: dober (rabljeno), Manufacturer: National Broach Model: GHC 12" Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Iaedpfx Ajhad Avedksp Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Iodpfegyd T Eox Adkeap Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Leto izdelave: 1964, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Iaedjt Dv I Ajpfx Adksp Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1960, stanje: nepreverjeno (rabljeno), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Maximum workpiece diameter: Ø 300 mm Isdjhu E Egepfx Adkoap Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Technical data: Manufacturer: Forst Model: RF 16 Max. pulling force: 16 t Max. stroke: 1200 mm Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Ijdshu E N Djpfx Adkeap Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Note: Control valve is missing

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), številka stroja/vozila: 60305, General / Technical Data: Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Maximum workpiece diameter: Ø approx. 900 mm Table aperture: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor, without attachments) Iaodpeiqkb Rsfx Adkop Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: – Electric clamping jaw sensing system (tool removal monitoring to prevent unintended return of the pull bridge) – Integrated coolant system with non-return valve and drain cock – Patented coolant/lubricant swivel system (retrofitted) Remarks: The machine bears the manufacturer’s CE marking. The machine is powered in our warehouse and available for inspection.

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI6DT Iaedpfogyd Svox Adkep Machine no.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Iajdpfsgyd S Dox Adkjp Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1962, stanje: dober (rabljeno), številka stroja/vozila: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Iedpfxot Dwb Ds Adkjap Mounting diameter for draw heads: 3 x Ø ___ mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Electrical connection / Power supply: 380 Volt, 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tool clamping system is designed for spring-actuated locking in both the drawbridge and the feeder. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production. For optimum operation, a foundation (pit) or optionally a platform is recommended. Draw heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Isdpfjlpadyjx Adkjap Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. Ijdpfxetuuvzj Adkeap The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: Iodpfx Ajiw Dlkedkeap - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1980, stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t Iasdpfx Adscdtplsksp automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Leto izdelave: 1959, stanje: rabljeno, max. pressing force: 16 t max. stroke: 1250 mm cutting speed: 5.6 m/min Iedpe Rwa Uefx Adkjap return speed: 30 m/min