Index V 200 nakup rabljenega (142)

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump Cjdjuhar Sspfx Afqohf - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * NB: Functionality not guaranteed. To be checked by a qualified company engaged by the buyer.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 080005, • Swing diameter over carriage: 1920 mm • Center height: 1300 mm • Distance between centers: 2000 to 30,000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear stages: 4 • Spindle nose: A2-15 Chodpfxowab Rdo Afqof • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (optionally up to 610 mm) • Turret type: Servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30,000 mm • X-axis ballscrew: 63 mm x P10 • Z-axis ballscrew: 63 mm x P10 (above 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (optionally up to 360 mm) • Tailstock quill stroke: 250 mm (optionally up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Stanje: novo, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Cjdpfx Aewcq Tyjfqohf Signs of storage

Stanje: rabljeno, Leto izdelave: 1998, Number of spindles: 6 Chedpevh Naqjfx Afqjf Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Polygon turning device - Thread cutting attachment - Hydraulic pick-off device - Workpiece discharge conveyor - Bar feeder by PIETRO CUCCHI, type AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant system

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, 1 x multi-spindle automatic lathe Manufacturer: Index Model: MS 25 Year of manufacture: 1990 Including bar feeder Brand: Iemca Model: PRA 40/33 P Codpfxju Hgduj Afqjhf Extensive accessories included. The machine can be inspected under power.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X-axis fixed, Z-axis NC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC SIEMENS 840D - Counter-spindle - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL Chsdsuhaumspfx Afqsf - Parts removal unit - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functional capability not guaranteed. To be checked by a qualified company appointed by the buyer.

Stanje: novo, Index MS32 DRIVE Z-NC SPK1 Item ID: GM2602.1551 Ball screw spindle Item ID: 10912112 previous Item ID: GM2602.1551 Cedpfxswb Evms Afqshf From stock inventory / storage marks – offer as shown in photos –

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine. Cedpfet U R Hzex Afqehf

Stanje: rabljeno, TECHNICAL DATA Chodpeuhauysfx Afqjf - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 53 / 68 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - 1 - Free workpiece length: 2000 [mm] - Max. main spindle chuck diameter: 420 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 50 / 70.5 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] LEFT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Tool holder: VDI 40 - Travel range X/Z: 320 x 2,000 [mm] - Travel range Y: 210 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 17 [kW] RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Tool holder: VDI 40 - Travel range X/Z: 210 x 2,000 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 11.3 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 137 [kW] Csdpfx Afsuhbpfoqohf WEIGHT AND DIMENSIONS - Floor space required: 9,000 x 3,500 [mm] - Machine height: 3,000 [mm] - Machine weight: 21,000 [kg] MACHINE HOURS - Operating hours: 34,274 [h] EQUIPMENT - Control system: INDEX C200-4D (Siemens 840D) - Coolant tank: KNOLL * with high-pressure pump: 80 [bar] * with paper filter - Automatic doors - Chip conveyor: right

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 1 MAIN SPINDLE Chsdpouhacdefx Afqjf - Spindle nose: A2-5 - Spindle drive power: 20/27 kW - Spindle speed: 6,300 rpm - Max. bar diameter: 42 mm - Max. diameter over bed: 200 mm - Max. main chuck diameter: 160 mm - Minimum C-axis resolution: 0.001° UPPER TURRET * Number of stations: 12 * Number of driven positions: 12 - Tool type: VDI 25 * Driven tool speed: 6,000 rpm * Driven tool power: 8 kW LOWER TURRET - Number of stations: 12 - Number of driven positions: 12 - Travel X/Z: 110/800 mm - Tool type: VDI 25 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW TAILSTOCK - Tailstock type: Numeric ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 43 kW WEIGHT AND DIMENSIONS - Floor space required: 4,435 x 1,950 mm - Machine height: 1,930 mm - Machine weight: 7,500 kg ACCESSORIES - Control system: INDEX C200-4D - Direct path measuring systems - Coolant tank * with high-pressure pump: 80 bar * with paper filter - Chip conveyor - Oil mist extraction unit - 3-jaw chuck

Stanje: rabljeno, TECHNICAL DATA - Max. diameter: 26 mm - Max. feed length: 125 mm - Spindle speed: 366 – 5,020 rpm - Number of spindles: 6 - Central block stroke with taper: 85 mm Option with hydraulics: 200 mm - Cross-slide stroke with taper: 36 mm Option with hydraulics: 56 mm Codpfxouham Ao Afqshf - Dimensions: 5,728 x 1,080 x 1,816 mm - Weight: 5,200 kg ACCESSORIES - Counter spindle - Counter-operation device - 5 drilling units - All tool holders - Pedestal + drum

Stanje: rabljeno, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar passage: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes, NC-controlled - Slide unit 1.2: X and Z axes, NC-controlled - Slide unit 2.1: X and Z axes, NC-controlled - Slide unit 2.2: X and Z axes, NC-controlled - Slide unit 3.1: X and Z axes, NC-controlled - Slide unit 3.2: Z axis, NC-controlled - Slide unit 4.1: X and Z axes, NC-controlled - Slide unit 4.2: Z axis, NC-controlled - Slide unit 5.1: X and Z axes, NC-controlled - Slide unit 5.2: Z axis, NC-controlled - Slide unit 6.1: Z axis, NC-controlled + SCARA axis - Slide unit 6.2: X and Z axes, NC-controlled - Slide unit 6.3: X axis, NC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW DIMENSIONS AND WEIGHT - Footprint: 3,329 x 2,032 mm - Height: 2,654 mm - Weight: 7,100 kg OPERATING HOURS - Power-on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - Siemens 840D CNC (PL) with dual NCU - 2 CNC operating panels - 6 TOPLUS collet receivers with integrated stop - 1 counter-spindle in position 6.1 - Clamping device on counter-spindle: Röhm chuck KFD-HS 110/3 - Counter-spindle internal coolant supply - CNC options for counter-spindle / polygon turning attachment Cedpfeuhantjx Afqshf - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft, positions 1.2.3 - Preparation for 2 additional operations with electronic shaft, positions 4.5.6 - STAUBLI robot, type TX60 (6 axes) - Robot gripper, external double clamping type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps at 40 bar - Büschel oil mist extraction system - RIEDEL cooling system - ARTIS preparation

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Maximum diameter: 18 mm Cedpfx Afeuhan Tjqehf - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: Z axis CNC controlled - Slide unit 2.1: Z axis CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.3 EQUIPMENT - Siemens 840D CNC control - Counter spindle - Bar feeder magazine IEMCA SIR MS18/33 P - KNOLL coolant tank * with high-pressure pump - KNOLL chip conveyor - Part removal unit - Part ejector

Stanje: rabljeno, TECHNICAL DATA Cjdjuhbftjpfx Afqshf - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travel X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Load area travel X/Z: 110/90 mm - Number of tools: 8 - Number of driven tools: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - CNC Siemens 840 (INDEX C200-4D) - C axis - Linear scale feedback on linear axes - Sub-spindle - 1 turning tool holder for counter-rotation operation - Coolant tank with pump - Chip conveyor

Stanje: rabljeno, TECHNICAL DATA Chjdeuhar Espfx Afqsf - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC control - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/38 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts catcher - Parts ejector - Fire protection system: KRAFT UND BAUER * NOTE: Functionality not guaranteed. Inspection by a qualified company on the buyer’s side required.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 6 Codpfx Afeuhac Doqjhf - Number of turrets: 3 MAIN SPINDLE - Spindle drive power: 29 kW - Spindle speed: 6000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 4.2 kW - Spindle speed: 4500 rpm - Minimum C-axis resolution: 0.001° - Travel: 280 mm LEFT UPPER TURRET - Number of positions: 5 - Tool type: VDI25 RIGHT UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Travel X/Z: 90/280 mm - Tool type: VDI25 - Driven tool speed: 4500 rpm - Driven tool power: 4.2 kW LEFT LOWER TURRET - Number of positions: 6 - Travel X/Z: 81/80 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 35 kW EQUIPMENT - Control: INDEX C200-4 - Coolant tank with high-pressure pump - Chip conveyor - Parts removal - Parts conveyor belt - Collet chuck

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled Cedpsuhangefx Afqehf - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes NC-controlled - Slide unit 1.2: fixed X-axis, Z-axis NC-controlled - Slide unit 2.1: fixed X-axis, Z-axis NC-controlled - Slide unit 2.2: X and Z axes NC-controlled - Slide unit 3.1: X and Z axes NC-controlled - Slide unit 3.2: fixed X-axis, Z-axis NC-controlled - Slide unit 4.1: X and Z axes NC-controlled - Slide unit 4.2: fixed X-axis, Z-axis NC-controlled - Slide unit 5.1: fixed X-axis, Z-axis NC-controlled - Slide unit 5.2: X and Z axes NC-controlled - Slide unit 6.1: X and Z axes NC-controlled - Slide unit 6.2: X and Z axes NC-controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar feeder: IEMCA SIR MS32/33/P - Oil supply unit with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: RIEDEL - Workpiece ejection with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 10 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22/29 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] - Max. main spindle chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 16.5/19 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] * Max. main spindle chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel distance: 500 [mm] - Rapid traverse speed: 60,000 [mm/min] - Distance spindle/sub spindle: 515 [mm] LEFT UPPER TURRET Chodpfsu Uu H Rsx Afqef - Number of positions: 10 - Number of driven positions: 10 - Travel range X/Z: 70 / 250 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] RIGHT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X: 125 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X/Z: 70 / 400 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 68 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 5540 x 2910 [mm] - Machine weight: 5,500 [kg] MACHINE HOURS - Spindle hours: 25,000 [operating hours] EQUIPMENT - CNC control: INDEX C200-4D (based on Siemens) - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] * with paper filter * with rinsing gun * internal coolant supply (ICS): main and secondary - Chip conveyor: RIGHT - Spindle cooling - Parts catcher - Bar feeder: IEMCA BOSS 545 E - Driven tool holders: 6 - Static tool holders: 24

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of sub spindles: 2 - Sub spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel distances: X x Z = 62 x 85 [mm] - Number of slides for secondary machining: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] - Connected load: 75 [kVA] - Production hours: 20,000 [h] EQUIPMENT - CN Siemens 840D SL - 2 NCU - TRANSMIT / TRACYL function - ARTIS Chodpfow Ah R Nsx Afqef - 2 additional electronic shaft preparations - 2 SCARA sub spindles - 2 workpiece collectors with conveyor belt - Chip removal device for bar remnants - INDEX bar guide - Bar feeder interface - Fire protection system

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS32P Chodpfxswyfn Ho Afqef

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 1 MAIN SPINDLE - Spindle nose: ISO 702/1-8 - Spindle drive power: 60 [kW] - Spindle speed: 3,500 [rpm] - Max. bar capacity: 102 [mm] - Max. turning diameter over bed: 560 [mm] - Max. main chuck diameter: 315 [mm] - Minimum C-axis resolution: 0.001 [degrees] TAILSTOCK - Tailstock type: Numérique - Taper type: ISO 30 - Distance between centers: 1,400 [mm] - Adjustable pressure: via power monitoring TURNING-MILLING SPINDLE - Travel X/Z: 300 x 1,840 [mm] - Travel Y: 286 [mm] - B-axis stroke: 360 [degrees] - Minimum B-axis resolution: 0.001 [degrees] - Tool type: HSK63 - Spindle speed: 12,000 [rpm] - Spindle drive power: 27.5 [kW] TOOL CHANGER - Tool changer type: Parapluie - Number of magazine tools: 2 x 40 Chedpfsuhalxsx Afqjf ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power rating: 100 [kVA] WEIGHT AND DIMENSIONS - Footprint: 5,460 x 2,560 [mm] - Machine height: 3,000 [mm] - Machine weight: 13,500 [kg] MACHINE HOURS - Power-on hours: 37,800 [h] - Turning-milling spindle hours: 7,891 [h] - Spindle hours: 9,137 [h] EQUIPMENT - Control: C200-4D (SIEMENS 840D Powerline) - Interface: RS232 / RJ45 - Coolant tank: 900 [l] * with high-pressure pump: 25 [bar] * with paper filter - Through-spindle coolant supply (IKZ) - Chip conveyor: KNOLL - Oil mist extraction: BÜCHEL SH2000 PEV - Spindle coolant - Steady rest: SMW SLU3 Ø12-152, CNC positioned - 3-jaw chuck: SMW KNCS-N-315-91 - Number of milling tool holders: 72 - Number of turning tool holders: 12

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm Cedouhbgwjpfx Afqehf - Spindle type: A2-4 - Travel X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Worktable travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool holder type: Capto C4 - Dimensions: 1,700 x 3,000 x 2,400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC - C axis

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm Chodpfx Ajuhbgdofqof - Rapid feed rate: 50 m/min - Worktable strokes X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW ACCESSORIES - Siemens 840D CNC control - C-axis

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Table travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC control Csdjuhbf Tspfx Afqohf - C axis