CNC stružnica

INDEX GU 3000

Stanje: rabljeno, Technical details: Swing diameter: 626 mm Turning length: 3000 mm Turning diameter: 600 mm Spindle bore: 100 mm Spindle speeds: 2800 rpm Machine weight approx.: 18 t Dsdpfxsvgmims Apleut Machine overhauled in 2003 and equipped with Siemens 840 D - NC steady rest - Power chuck 400 mm - 12-station turret

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen Dsdpfx Aeylw Stjpleut • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm Dsdpjw Intaefx Apleut X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Duodouyk N Iepfx Aplot

Leto izdelave: 2001, stanje: generalkompletno obnovljen (rabljeno), Affordable MAZAK Laser Cutting System NTX48 1.5kW Year of manufacture: 2001 Very well-maintained, completely overhauled MAZAK laser machine with 1500W Sheet size: 2500mm x 1250mm Minimal installation footprint: 2.6m x 6m Small parts conveyor belt Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Plastic processing possible Dedpfxehturcj Apljut Incl. software Incl. warranty Incl. extraction system Incl. commissioning and training Machine can be tested under power! ===Optional: Fully automatic loading and unloading available===

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 45 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 1700/1400/1240 mm - Rapid traverse speed (X/Y/Z): 48 m/min - Feed speed (X/Y/Z): 20 m/min SWIVEL AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 - Tool change time: 6 s PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1250x1250 mm - Number of pallets: 2 - Max. pallet load: 3,000 kg - Distance from table center to spindle nose: 70–1470 mm - Max. workpiece diameter: 1,970 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 32,500 kg MACHINE HOURS - Power-on hours: 34,422 h ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Synchronized tapping - 3-color status light - Coolant tank * with high-pressure pump: 70 bar * internal coolant supply (through-spindle coolant) * paper filter * coolant chiller * cabin washing system Duedpsw D Hwwofx Aplst - Chip conveyor - Tool measurement probe - Workpiece measuring probe: Renishaw RMP60 - Electrical transformer

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale. Dusdpfsvc Aklox Aplst

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 134418, merilno območje os X: 1.200 mm, merilno območje osi Y: 1.800 mm, merilno območje os Z: 1.000 mm, Oprema: Na voljo je tipska ploščica, Tehnični podatki Proizvajalec: Zeiss Tip: Accura 12/18/10 Serijska št.: 13418 Leto izdelave: 2007 Merilna plošča Merilna plošča iz trde kamnine Širina: 2.400 mm Globina: 1.700 mm Višina: 400 mm Merilno območje Os X: 1.200 mm Os Y: 1.800 mm Dedsxnruaspfx Aplout Os Z: 1.000 mm Dodatna oprema Upravna konzola PC enota 2 x 27'' monitorja, proizvajalec BenQ Tipkovnica Miška Dodatki Skladiščeno v dvovratni kovinski omari Cena: na zahtevo! Opomba: Naša ponudba je namenjena izključno strokovnim strankam. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, navedbah in cenah ter do vmesne prodaje!)

Stanje: dober (rabljeno), Leto izdelave: 2008, Maximum swing diameter over bed: 700 mm Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 – 152 mm - Full-stroke cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X / Z / C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115 / -115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunction tools, e.g. special tool with radially arranged indexable inserts, that can be positioned in the drilling/milling spindle at 60°, 90°, 120°, and 180° Duodpjxmirgjfx Aplot - Hobbing software for straight and helical gears with speed synchronization of main and milling spindle - Electrostatic extraction system - Chip conveyor - Documentation - CE marking

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control system: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight: 10,000 kg Spindle speeds: 5-6000 rpm Gear stages: 2 Drive power – milling spindle: 45 kW Distance: milling spindle – clamping spindle: 3500 mm Spindle torque: 1250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Maximum tool weight: 50 kg Maximum tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angular milling head: yes Automatic tool clamping: yes Ball screw drives: yes Guideway coverings: yes Coolant system: yes High-pressure cooling system (internal cooling): yes Fully enclosed work area: yes Dujdovwgmmjpfx Aplot Portal machining center with tool changing system and second table plate.