Index Gu 800 nakup rabljenega (142)

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 6 - Number of turrets: 3 MAIN SPINDLE - Spindle drive power: 29 kW - Spindle speed: 6000 rpm Iodpfx Aeuhac Deh Dotn - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 4.2 kW - Spindle speed: 4500 rpm - Minimum C-axis resolution: 0.001° - Travel: 280 mm LEFT UPPER TURRET - Number of positions: 5 - Tool type: VDI25 RIGHT UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Travel X/Z: 90/280 mm - Tool type: VDI25 - Driven tool speed: 4500 rpm - Driven tool power: 4.2 kW LEFT LOWER TURRET - Number of positions: 6 - Travel X/Z: 81/80 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 35 kW EQUIPMENT - Control: INDEX C200-4 - Coolant tank with high-pressure pump - Chip conveyor - Parts removal - Parts conveyor belt - Collet chuck

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Index G220 CNC stružnica z rezkalno funkcijo Leto izdelave: 2018 (demonstracijski stroj) Ponovno zagon: 2021 Krmiljenje: Siemens 840D Solution Line, malo obratovalnih ur Glavno vreteno D90 Protivreteno D90 Naprava za vpenjalni tlak 8 do 80 bar Zgornji nosilec orodja z motoriziranim rezkalnim vretenom HSK-T63 Osi X, Z, Y in B Nosilec orodja 2 z osmi X, Y, Z in revolversko glavo z 12 postajami VDI30 Izmenjevalec orodij z verižnim magazinom, dvovrstni nosilec, 2 x 50 HSK 63 Upravljanje orodij tipa "rezkalni stroj" z relativno D-številko Hladilna enota Samodejna delovna vrata Svetlobna pregrada za kontrolo pretrganja svedra 5-osna simultana obdelava za motorizirano rezkalno vreteno Sistem nadzora orodja na osnovi toka motorja Upravljanje orodij z nastavnim dialogom (maks. 250 orodij) Merjenje obdelovanca na glavnem ali protivretenski enoti Iedpfxsw Tfans Ah Dstn Merilni cikli Dodatno konjišče za drugi prečni pomik Funkcija konjička v protivretenski enoti Elektronska gred Brusni cikli Transportni trak za odvod odrezkov Filter Hladilni sistem ECO-Fluid, 3 črpalke 3, 8, 20-80 bar UNIMAG4 Portalska snemalna naprava Transportni trak Brez vpenjalnih naprav, brez nosilcev orodij, prodaja z lokacije

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 140 mm Turning length 615 mm Control C200-4D Spindle bore 65 mm Spindle speed 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides 1, 2 and 3 X-axis travel 110 mm Z-axis travel 360 mm Y-axis travel 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction 150 mm Slide travel Z-direction 600 mm Spindle speed 5,000 rpm B-axis, B-correction axis +/- 1° Tool turret – number of stations: 3 x 12 Itedpfx Ahjwzynqs Den Tool holder DIN 69880 VDI 25 x 48 C-axis 0.001° Total connected load 61 kW Machine weight approx. 6.5 t Space requirement approx. 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with length from 500–3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading system BREUNING ILS-REX-7208, year 2007

Stanje: dober (rabljeno), Leto izdelave: 2003, CNC lathe in well-maintained condition – immediately operational For sale is a high-quality, well-serviced CNC lathe in excellent condition. The machine is currently in production, fully functional, and can be inspected at any time by prior arrangement. Control system: INDEX C 200-4 Isdpfx Aew Evg Doh Detn Additional equipment: INDEX MBL bar feeder Dimensions (main unit): 3750 x 1400 x 1750 mm Technical specifications Spindle system Number of spindles: 2 Spindle motor power: 29 kW Spindle bore: 52 mm (optionally 60 mm) Max. turning length: 280 mm Max. spindle speed: 5,000 rpm Turret 1 Number of tool stations: 8 Travel paths (X/Z): 90 mm / 280 mm Rapid traverse X/Z: 24 m/min / 24 m/min Feed force X/Z: 5,500 Nm / 5,500 Nm Turret 2 Number of tool stations: 6 Travel paths (X/Z): 81 mm / 80 mm Rapid traverse X/Z: 16 m/min / 24 m/min Feed force X/Z: 8,300 Nm / 5,500 Nm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, INDIVIDUÁLNE MODULY: 1. POLOAUTOMATICKÝ DEPALETIZÁTOR (model: Depal 512 – mini) na vykladanie sklenených fliaš z paliet; 1 operátor je potrebný na vloženie palety do zariadenia a odstránenie kartónu medzi vrstvami fliaš 2. UNIVERZÁLNY OPLACHOVACÍ STROJ (model: IND-Wash 56 S2) na parnú sanitáciu a oplachovanie fliaš horúcou vodou pred plnením 3. ROTÁČNÁ PLNIARENSKÁ LINKA (model: IND-Dose 46 PO-12) na stáčanie horúceho produktu do sklenených fliaš valcovitého tvaru 4. UZÁVEROVACÍ STROJ NA ZATVÁRANIE TWIST-OFF VIEČOK (model: IND-Close 12E) na vákuové uzatváranie naplnených fliaš pomocou parnej vákuovej technológie 5. PASSEURIZAČNÝ A CHLADIACI TUNEL (model: PT 42-9) na ďalšiu kontinuálnu pasterizáciu produktu 6. VÁKUOVÝ TESTER (model: IND-Test 61) na kontrolu a vyraďovanie nesprávne uzavretých fliaš 7. SUŠIACI STROJ (model: IND-Blow 86) na odstránenie zvyšnej vlhkosti z povrchu fliaš pred aplikáciou etikiet 8. LINEÁRNA ETIKETOVAČKA NA SAMOLEPIACE ETIKETY (model: IND-Lab 32B) s možnosťou horného (cez viečko) a bočného označovania valcových fliaš 9. AUTOMATICKÝ ZOSKUPOVAČ A FÓLIOVAČ S TÁCKOU (model: IND-pack 29 T) na balenie fliaš do kartónových táck rôznych konfigurácií podľa veľkosti fliaš 10. SÚPRAVA DOPRAVNÍKOV S PLOCHÝM RETIAZKOVÝM PÁSOM (model: IND-Trans 71) na prepojenie jednotlivých modulov linky (doprava medzi oplachom, plnením a uzatváraním s hornými krytmi) Isdpow Hg Hqefx Ah Djtn

Stanje: pripravljen za uporabo (rabljen), OPIS TEHNIČNI PODATKI - Število osi: 7 - Število vreten: 2 - Število revolverjev: 2 GLAVNO VRETENO - Vretenasti nos: A2-5" - Moč vretena: 13 kW - Hitrost vrtenja vretena: 6.500 min⁻¹ - Največji premer struženja: 400 mm - Natančnost indeksiranja C-osi: 0,001° PROTIVRETENO - Vretenasti nos: A2-5" - Moč vretena: 13 kW - Hitrost vrtenja vretena: 6.500 min⁻¹ - Natančnost indeksiranja C-osi: 0,001° - Pomik: 640 mm REVOLVER - Število postaj: 14 - Število motoriziranih postaj: 14 - Tip nosilca orodja: VDI 25 - Hitrost pogonskih orodij: 6.000 min⁻¹ LEV SPODNJI REVOLVER - Število postaj: 14 - Število motoriziranih postaj: 14 - Tip nosilca orodja: VDI 25 - Hitrost pogonskih orodij: 6.000 min⁻¹ NAPAJANJE - Napetost: 400 V, 35 kW TEŽA IN DIMENZIJE - Tloris stroja: 3.450 x 2.520 mm - Višina stroja: 2.650 mm - Teža stroja: 4.800 kg OPREMA - CNC: INDEX C200-4 (Siemens 840C) - Opcija konjička s protivretenom Iedpfxswbtrvj Ah Dstn - Hladilni rezervoar in filtrirni sistem - Transportni trak za ostružke: KNOLL - Sistem za zaznavo preloma orodja - Sistem za rokovanje in paletizacijo (600x400)

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes NC-controlled - Slide unit 1.2: fixed X-axis, Z-axis NC-controlled - Slide unit 2.1: fixed X-axis, Z-axis NC-controlled - Slide unit 2.2: X and Z axes NC-controlled - Slide unit 3.1: X and Z axes NC-controlled - Slide unit 3.2: fixed X-axis, Z-axis NC-controlled - Slide unit 4.1: X and Z axes NC-controlled - Slide unit 4.2: fixed X-axis, Z-axis NC-controlled - Slide unit 5.1: fixed X-axis, Z-axis NC-controlled Itedpfjuhangex Ah Don - Slide unit 5.2: X and Z axes NC-controlled - Slide unit 6.1: X and Z axes NC-controlled - Slide unit 6.2: X and Z axes NC-controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar feeder: IEMCA SIR MS32/33/P - Oil supply unit with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: RIEDEL - Workpiece ejection with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 415, največja hitrost vretena: 6.000 obr/min, 7.8.25: Cette G200 a été démontée il y a une semaine et est donc rapidement disponible. 5.2.25: Correction de la sous-catégorie en "centre de tournage-fraisage CNC". Les données techniques sont disponibles dans la fiche technique. Incl. bac de rétention, système haute pression, embarreur 4 m. La fin de production était en juillet 2025. La machine peut être visitée à tout moment sur rendez-vous. ----- Merci de nous indiquer votre prix d'offre. Itsdpfsu Rc Evjx Ah Den Vente uniquement au sein de l'UE, y compris la Turquie. Sans emballage ; tout droit à la garantie est exclu. Si vous souhaitez démonter l'installation vous-même, merci de l'indiquer dans votre offre. Nous n'assumons aucune responsabilité quant à l'exactitude des données techniques, à l'exhaustivité des accessoires et de l'équipement d'outillage, ni au respect de toutes les exigences de sécurité et de protection de l'environnement citées dans les règlements de prévention des accidents.

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Maximum spindle speed: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changers: 2 x 14, Siemens control system. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar loader. Completely overhauled in 2016. Itjdetdwwmepfx Ah Djn

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC control - Counter spindle - Polygon turning attachment: Slide unit 5.1 Ijdpfjuhar Eex Ah Dotn - Bar feeder: IEMCA SIR MS32/38 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts catcher - Parts ejector - Fire protection system: KRAFT UND BAUER * NOTE: Functionality not guaranteed. Inspection by a qualified company on the buyer’s side required.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 510744, največja hitrost vretena: 6.000 obr/min, Premer palice (maks.): 65 mm, število vreten: 2, 7.8.25: Ta G200 je bila pred enim tednom razstavljena in je tako na voljo takoj. 5.2.25: Popravek podkategorije na "CNC stružno-rezkalni center". ---- Tehnični podatki so navedeni v priloženem dokumentu. Vključno z lovilno kadjo, visokotlačnim sistemom, podajalnikom palic 4 m Konec proizvodnje ni pred julijem 2025. Stroj si je mogoče kadarkoli po dogovoru ogledati. ----- Prosimo, navedite svojo ponudbeno ceno. Iedpfxou Ix Uho Ah Dotn Prodaja je možna le znotraj Evrope, vključno s Turčijo. Brez embalaže; izključena je vsaka pravica do reklamacije. Če želite napravo demontirati sami, to ustrezno navedite v svoji ponudbi. Ne prevzemamo odgovornosti za pravilnost tehničnih podatkov, za popolnost pribora in orodij ter za izpolnjevanje vseh zahtev glede varnosti in varstva okolja, kot jih navajajo predpisi za preprečevanje nesreč.

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), X/Z travel: 520 mm / 200 mm, rapid traverse: 30 m/min, tool stations: 14, spindle speed: 7500 rpm / 6000 rpm, spindle bore: 30 mm, power: 10 kW, turning diameter: 200 mm, swing diameter: 260 mm, turning height: 200 mm. Machine dimensions X/Y/Z: approx. 3250 mm / 2100 mm / 2250 mm, weight: approx. 3200 kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Ijdpfswp R U Rox Ah Detn

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS32P Ijdpfx Aswyfn Hjh Dstn

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Max. turning diameter: 200 mm, max. turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Ijdpjtdwwqofx Ah Detn

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of sub spindles: 2 - Sub spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel distances: X x Z = 62 x 85 [mm] - Number of slides for secondary machining: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] - Connected load: 75 [kVA] - Production hours: 20,000 [h] EQUIPMENT - CN Siemens 840D SL - 2 NCU Isdpfow Ah R Njx Ah Dotn - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA sub spindles - 2 workpiece collectors with conveyor belt - Chip removal device for bar remnants - INDEX bar guide - Bar feeder interface - Fire protection system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Spindle diameter: 30 mm, speed: 7,500 rpm, equipped with chip conveyor and base holder. Control system: Siemens Sinumerik 840 C. Length: 3,210 mm, width: 2,084 mm, height: 2,214 mm, weight: 3.2 t. An on-site inspection is possible. Itedsq A S Atopfx Ah Dsn

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Max. machinable diameter: 200 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Minimum C-axis resolution: 0.001° - Z travel: 445 mm TURRET 1 - Number of positions: 14 - Number of driven positions: 14 - Travel X/Z: 105/400 mm - Travel Y: 120 mm - B-axis stroke: +90/-270° - Tool type: VDI 25 - Driven tools speed: 6000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V Itjdpsu Hadhsfx Ah Dsn WEIGHT AND DIMENSIONS - Footprint: 4,975 x 2,890 mm - Machine height: 2,050 mm - Machine weight: 4,800 kg EQUIPMENT - Control: Siemens 840C - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal system - Parts conveyor belt - Bar feeder: LNS

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 200 mm, turning length: 400 mm, max. turning diameter: 420 mm, bar capacity: 60 mm, max. chuck diameter: 160 mm, spindle speed: 5,000 rpm, turrets: 2, stations: 2 x 14, rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions (X/Y/Z): approx. 7,500 mm / 2,100 mm / 2,100 mm, weight: approx. 4,500 kg. Documentation available. An on-site inspection is possible. Iodpfx Ahju T Rgkj Djtn

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 11 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW Iedpfx Aev Ig Avoh Detn - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel path: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Min. B-axis resolution: 0.001° - Tool holder type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Min. B-axis resolution: 0.001° - Tool holder type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts catcher

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), A CNC multi-spindle automatic lathe from Index, completely overhauled in 2020, is available. Number of spindles: 6, maximum bar passage: 32 mm, spindle speed: 6300 rpm, weight: approx. 10,800 kg, control system: Siemens Sinumerik. Bearing condition readings from 2024: HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. Extensive refurbishments have been carried out on the spindles, cooling system, bearings, hydraulic lines, and more. Full documentation is available. An on-site inspection is possible. Itodpfxewr Dw Re Ah Djn

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 Itedpfx Aeuhalxoh Djn - Number of spindles: 1 MAIN SPINDLE - Spindle nose: ISO 702/1-8 - Spindle drive power: 60 [kW] - Spindle speed: 3,500 [rpm] - Max. bar capacity: 102 [mm] - Max. turning diameter over bed: 560 [mm] - Max. main chuck diameter: 315 [mm] - Minimum C-axis resolution: 0.001 [degrees] TAILSTOCK - Tailstock type: Numérique - Taper type: ISO 30 - Distance between centers: 1,400 [mm] - Adjustable pressure: via power monitoring TURNING-MILLING SPINDLE - Travel X/Z: 300 x 1,840 [mm] - Travel Y: 286 [mm] - B-axis stroke: 360 [degrees] - Minimum B-axis resolution: 0.001 [degrees] - Tool type: HSK63 - Spindle speed: 12,000 [rpm] - Spindle drive power: 27.5 [kW] TOOL CHANGER - Tool changer type: Parapluie - Number of magazine tools: 2 x 40 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power rating: 100 [kVA] WEIGHT AND DIMENSIONS - Footprint: 5,460 x 2,560 [mm] - Machine height: 3,000 [mm] - Machine weight: 13,500 [kg] MACHINE HOURS - Power-on hours: 37,800 [h] - Turning-milling spindle hours: 7,891 [h] - Spindle hours: 9,137 [h] EQUIPMENT - Control: C200-4D (SIEMENS 840D Powerline) - Interface: RS232 / RJ45 - Coolant tank: 900 [l] * with high-pressure pump: 25 [bar] * with paper filter - Through-spindle coolant supply (IKZ) - Chip conveyor: KNOLL - Oil mist extraction: BÜCHEL SH2000 PEV - Spindle coolant - Steady rest: SMW SLU3 Ø12-152, CNC positioned - 3-jaw chuck: SMW KNCS-N-315-91 - Number of milling tool holders: 72 - Number of turning tool holders: 12

Leto izdelave: 1976, Stanje: pripravljen za uporabo (rabljen), Maximum turning diameter: 500 mm, maximum turning diameter over bed/cross slide: 600 mm / 315 mm, spindle speed: 4,000 rpm, maximum slide travel: 500 mm, rapid traverse: approx. 10 m/min. Tool stations: 2 x 8, tool holder: VDI 3425, tool size: 20, maximum bar diameter: 65 mm, maximum thread pitch: 2,000 mm. Documentation available. The machine has a gearbox defect. Itedpfjt Td U Nox Ah Den

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travel X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Worktable travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool holder type: Capto C4 Itsdpfx Ahjuhbgws Dsn - Dimensions: 1,700 x 3,000 x 2,400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC - C axis

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm Itjdpjuhbgdsfx Ah Don - Rapid feed rate: 50 m/min - Worktable strokes X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW ACCESSORIES - Siemens 840D CNC control - C-axis

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW Itodpfxjuhbf To Ah Den - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Table travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC control - C axis