6-vreteno avtomatski stroj za obdelavo palic

2x INDEX MS25E

Stanje: dober (rabljeno), Deli, ki so prikazane v roki, niso vključeni. Tehnične podrobnosti so prikazane na sliki. Dsdpfx Ajwb Eptjpwjku Orodja v leseni škatli so priložena stroju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 500 mm, premer struženja: 240 mm, izvrtina vretena: 65 mm, največja hitrost vretena: 4.000 obr/min, pomik osi Y: 40 mm, moč vretenovega motorja: 15 W, Delovna dolžina 500 mm Maks. delovni premer 240 mm Dedpeycubtsfx Apweku Hitrost vretena 4.000 min⁻¹ Premer izvrtine vretena 65 mm Število orodij 12 kos Pomik Y osi +/- 40 mm Krmilje FANUC 18 i TB Obratovalne ure 5.000 Glavna moč motorja 15 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis Dodpfxjx D Iuzj Apwsku

Stanje: dober (rabljeno), Deli, ki jih oseba kaže z roko, niso vključeni. Tehnični podatki so prikazani na sliki. Dsdpfx Aewb Em Sspwsku Orodja v leseni škatli so priložena stroju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17004A, Premer palice (maks.): 20 mm, Naprodaj: dve popolnoma delujoči stružnici Tsugami HS20M 5-axis. Vse je v delujočem stanju, stroja sta bila nedavno servisirana in tehnično pregledana. Djdpoyghcrefx Apweku Vključeno: – različni nosilci orodij, – popolna tehnična dokumentacija. Stroja sta bila v glavnem uporabljena za proizvodnjo zobnih implantatov in sta bila kupljena na Švedskem. Če vas zanima, kontaktirajte me za dodatne podrobnosti, fotografije, ceno ali za dogovor o ogledu.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] - Max. bar diameter: 20 [mm] Dsdpfxou Uu Sye Apwjku - Minimum C-axis resolution: 0.001 [degree] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [degree] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [degree] - Minimum B-axis resolution: 0.001 [degree] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 24 SUBSEQUENT MACHINING Number of positions: 4 Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Hours under power: 52,500 [h] - Operating hours: 11,639 [h] EQUIPMENT - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank: Hydro-Fluid HP3 * with high-pressure pump: 40 - 170 [bar] - Chip conveyor - Spindle cooling - Parts removal - Parts belt conveyor - Bar feeder: LNS EXPRESS 220 S2 - Fire extinguishing system* * Note: Functionality not guaranteed. Should be checked by a qualified company of the buyer. - Electrical transformer

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Dodeu Ix N Sepfx Apweku Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 Dedjwd Ud Eopfx Apwsku MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] - Max. bar diameter: 20 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [degrees] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [degrees] - Minimum B-axis resolution: 0.001 [degrees] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 24 SUBSEQUENT MACHINING - Number of positions: 4 - Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Power-on hours: 12,249 [hrs] - Operating hours: 1,816 [hrs] EQUIPMENT - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank - Parts remover - Parts conveyor belt - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Max. workpiece diameter: 25 mm, max. workpiece length: 100 mm, max. bar diameter: 25 mm, max. X/Z travel: 42 mm / 50 mm, rapid traverse: 40 m/min, number of spindles: 6, spindle speed: 12,000 rpm, control: Siemens 840D Powerline. Djdpstqfq Usfx Apwoku

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control system: INDEX Total power requirement: 20 kW Djdpev Raatefx Apwjku - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-off device - Workpiece removal conveyor - Bar feeder, manufacturer: IEMCA, type: PRA 40/35/P