Index Gfg 450 nakup rabljenega (141)

Stanje: dober (rabljeno), Index GE42 Clamping Cylinder Hjdpefbup Rjfx Af Tong GG2713.2101 Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 080005, • Swing diameter over carriage: 1920 mm • Center height: 1300 mm • Distance between centers: 2000 to 30,000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear stages: 4 Hnedpfx Aowab Rdjf Tsg • Spindle nose: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (optionally up to 610 mm) • Turret type: Servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30,000 mm • X-axis ballscrew: 63 mm x P10 • Z-axis ballscrew: 63 mm x P10 (above 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (optionally up to 360 mm) • Tailstock quill stroke: 250 mm (optionally up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 800 mm, premer struženja: 280 mm, izvrtina vretena: 65 mm, potovalna razdalja osi X: 310 mm, pomik po osi Z: 870 mm, moč vretenovega motorja: 22.000 W, največja hitrost vrtenja: 4.000 obr/min, skupna višina: 2.200 mm, skupna dolžina: 4.100 mm, skupna širina: 2.000 mm, skupna masa: 4.600 kg, premer nihanja nad prečno desko: 400 mm, zunanji premer vpenjalne glave: 315 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Z veseljem smo vam na voljo za telefonske poizvedbe. Hnsdpfew Nn Elex Af Teg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 585 mm, premer struženja: 470 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 600 mm, Lathe in very good condition with comprehensive accessories! TECHNICAL DETAILS Working Area - Maximum turning diameter: 470 mm - Maximum nominal turning length: 585 mm - Travel X-axis: 200 mm - Travel Z-axis: 600 mm Turret - Number of stations: 14 - Tool mounting: according to DIN 69880, diameter 30 mm - Tool holder cross-section: 20 x 20 mm - Indexing time per station: 0.5 s - Drive torque for driven tools: 20 Nm - Driven tools: 7 stations - Speed of driven tools: 4,500 rpm Axes - Rapid traverse X and Z: 30 m/min - Feed force X: 5,000 N - Feed force Z: 10,000 N Main spindle - Spindle bore: 65 mm - Spindle nose: according to DIN 6353 Hnodpfx Afow Nh Ias Tsg - Maximum direct-drive speed: 5,000 or 6,000 rpm - Drive power: 22 kW MACHINE DETAILS Control: Siemens Sinumerik 810 Programmable parameters: 700 Dimensions & Weight - Dimensions (L x W x H): 3,162 x 1,720 x 1,715 mm - Machine weight: 4,800 kg EQUIPMENT - 1.5 MB main memory - 10" color monitor - Automatic program memory - C-axis - Linear and circular interpolation - Block-by-block execution - Block search - Programmed stop - Absolute or incremental programming, metric or imperial - Tool radius compensation - M, S, and T functions - Fixed cycles and subprograms - Logical and arithmetic operations

Stanje: rabljeno, CNC večvretenski avtomatski stružnik INDEX MS32C Hnodpfsxma Npox Af Tjg

Stanje: rabljeno, Leto izdelave: 1998, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides Hjdpfx Afjvh Naqe Tong - Polygon turning device - Thread cutting attachment - Hydraulic pick-off device - Workpiece discharge conveyor - Bar feeder by PIETRO CUCCHI, type AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant system

Stanje: dober (rabljeno), Index HBF Hnsdpfx Aed Tx A Tof Tsg hydraulic pump and oil pump bar feeder

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, 1 x multi-spindle automatic lathe Manufacturer: Index Model: MS 25 Year of manufacture: 1990 Including bar feeder Brand: Iemca Model: PRA 40/33 P Hedju Hgduspfx Af Tsng Extensive accessories included. The machine can be inspected under power.

Stanje: dober (rabljeno), Leto izdelave: 1997, Index ABC Year of manufacture: 1997 Machine number: 400621 Spindles: 1 Hodohd U Hfjpfx Af Tjng Max diameter: 50 mm Turrets: 2 Positions: 8 on turret 1 / 6 on turret 2 C-axis is programmable 1 synchronising spindle in the machine + 2 for regeneration High-pressure pump: yes, 30 bar

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 510864, stružna dolžina: 200 mm, CNC Turning Machine INDEX G200 Overhauled: 2017 Machine number: 510864 Hnedpsulhinofx Af Tjg Max. turning length: 200 mm Bar feeder: INDEX MBL Main Spindle Collet clamping bore: 42 mm Spindle diameter at front bearing: 85 mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Max. nominal turning diameter: 200 mm Max. swing diameter: 420 mm Power Pmax 100%: 7.5/13/20 kW Torque Mdmax 100%: 35/61/95 Nm Speed: 6300 rpm Counter Spindle Collet clamping bore: 42 mm Spindle diameter at front bearing: 85 mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Power Pmax 100%: 7.5/13 kW Torque Mdmax 100%: 35/61 Nm Speed: 6300 rpm Min. distance to collet: 15 mm Longitudinal travel: 445 mm Rapid traverse: 22.5 m/min Cross Slide 1 XZ (top) XZ travel: 120 x 400 mm Feed force: 5000 N Cross Slide 2 (bottom) XZ travel: 105 x 400 mm Feed force: 5000 N Further information available upon request!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer vretena: 90 mm, število mest v zalogovniku orodij: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cables and hoses for the drag chains of Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle bore HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: Taper No. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Hnsdsvitznjpfx Af Teg Turret 1 Axes: XYZB Stations / driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / driven: 12 / 6 Coolant system Type: Knoll unit with paper band filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chucks - Numerous turning and drilling holders with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4, radial and axial - Numerous static holders CDI-Capto C4, radial and axial

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Hsdot U R Hzjpfx Af Tsng Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine.

Stanje: zelo dobro (rabljeno), Index MS42C HBF bar guide Oil distributor Flaps Hnedpsfdr R Ujfx Af Teg with clamping screws

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 500641, stružna dolžina: 710 mm, premer struženja: 300 mm, potovalna razdalja osi X: 215 mm, pomik osi Y: 180 mm, pomik po osi Z: 710 mm, skupna višina: 2.150 mm, skupna dolžina: 2.150 mm, skupna širina: 3.160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore with collet clamping: 65 mm Spindle diameter at front bearing: 110 mm Max. speed: 5,000 rpm Spindle nose ISO 702/1 Size: 6 Chuck diameter: 250 mm Max. torque (100%): 275 Nm Max. power (100%): 43 kW Tailstock electrically traversable Centre distance (710): 740 mm Max. thrust force (electric): 10,000 N Cross Slide 1 XYZ (upper) Travel X-axis: 215 mm Travel Y-axis: 180 mm Travel Z-axis: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse speed X-axis: 20 m/min Rapid traverse speed Y-axis: 7.5 m/min Rapid traverse speed Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Hedpfx Aowxw Upef Tong Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Turret Number of tools: 12 Tool system DIN 69 880: Ø30 mm MACHINE DETAILS Dimensions and Weight Height: 2,155 mm Base area (710): 4,140 mm x 2,155 mm Installation area (710) without bar feeder: 4,140 mm x 3,570 mm Weight (710): approx. 6,500-7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main fuse: 35 to 125 A EQUIPMENT Milling spindle set 6-position tool changer HKS-50B KM40 Finished part removal device Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height 1,250 mm Coolant fine filtration hydrostatic paper band filter Vacuum rotary filter W-UAT-106A MMS system LUBRIX 750

Stanje: dober (rabljeno), Leto izdelave: 1990, 6 spindles Hodpfx Aovc Ddajf Tjng Thread cutting device Spindle stop 1x longitudinal turning attachment 1x tool for back side machining Accessories: collets

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, število vreten: 2, proizvajalec krmilnikov: Siemens, model krmilnika: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindle! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool Carrier 1: Motorized milling spindle tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT1 XYB Tool Carrier 2: Motorized milling spindle tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and control cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min max. 80 bar Fine filtration of coolant lubricant: Compact band filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine equipment: available Control: Siemens 840D Solution Line EQUIPMENT Tool changer Electronic shaft for spindles and drive systems Main spindle extension stages Hsdpfxewylz Ts Af Tjng Stop device incl. coolant through HSP with solenoid valve Counter spindle extension stages Stop device incl. coolant through CSP with solenoid valve Precision package Portal unloading device Finished parts conveyor belt Hinged belt conveyor 1,250 mm with lift pump Chip discharge right Coolant supply and fine filtration Bar loading magazine INDEX LMS 3,200 SBL Boring direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar loading magazine

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Maximum spindle speed: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changers: 2 x 14, Siemens control system. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar loader. Completely overhauled in 2016. Hjdpfxjtdwwme Af Tsng

Stanje: generalkompletno obnovljen (rabljeno), Index ER 25 Bar turning attachment Hodpfxefc Rmcs Af Tong GT 2351.1300 3 units in stock

Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 600mm/320mm, turning length: 820mm. Includes parts catcher, steady rest, and tailstock. Expected to be available from early 2026. Hnjdpfx Afet Tfaas Tsg

Stanje: novo, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Hodpjwcq Tyjfx Af Tsng Signs of storage

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Max. turning diameter: 200 mm, max. turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Hnodpfx Astdwwqof Tog

Stanje: novo, Index MS32 DRIVE Z-NC SPK1 Item ID: GM2602.1551 Ball screw spindle Item ID: 10912112 previous Item ID: GM2602.1551 Hnsdpfx Aswb Evmjf Tog From stock inventory / storage marks – offer as shown in photos –

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 200 mm, turning length: 400 mm, max. turning diameter: 420 mm, bar capacity: 60 mm, max. chuck diameter: 160 mm, spindle speed: 5,000 rpm, turrets: 2, stations: 2 x 14, rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions (X/Y/Z): approx. 7,500 mm / 2,100 mm / 2,100 mm, weight: approx. 4,500 kg. Documentation available. An on-site inspection is possible. Hnodsu T Rgkopfx Af Tjg

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), A CNC multi-spindle automatic lathe from Index, completely overhauled in 2020, is available. Number of spindles: 6, maximum bar passage: 32 mm, spindle speed: 6300 rpm, weight: approx. 10,800 kg, control system: Siemens Sinumerik. Bearing condition readings from 2024: HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. Extensive refurbishments have been carried out on the spindles, cooling system, bearings, hydraulic lines, and more. Full documentation is available. An on-site inspection is possible. Hsdowr Dw Rjpfx Af Teng

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 200 mm, max. turning diameter: 260 mm, turning height: 200 mm, spindle bore: 30 mm, spindle speed: 7,500 rpm, power: 10 kW, torque: 49 Nm. Travel X/Z: 520 mm / 200 mm, rapid traverse X/Z: 30 m/min, tool stations: 14, tool holder: VDI 30, driven tool speed: 6,000 rpm. Machine dimensions X/Y/Z: approx. 2,100 mm / 2,100 mm / 2,300 mm, weight: approx. 3,300 kg, control: Siemens Sinumerik. The X-axis of the machine exhibits running noise. Documentation available. An on-site inspection is possible. Hjdpfevpvinjx Af Teng