Emag Vsc 315 nakup rabljenega (122)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 680 mm, pomik po osi Z: 250 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 3, Ta 3-osni vertikalni stružni stroj EMAG VSC 315 je bil izdelan leta 1999. Ima X-os z hodom 680 mm in Y-os z hodom 250 mm, prav tako pa omogoča uporabo orodij. Če iščete kakovosten stružni stroj, razmislite o EMAG VSC 315, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. Tehnične specifikacije Pogonska orodja: Da Lodpfjy Enntjx Al Nsrk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 850 mm, pomik po osi Z: 315 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 3, Vertikalni stružnica iz leta 2000. Ta EMAG VSC 400 ima pomik osi X 850 mm in pomik osi Z 315 mm. Opremljena je z gnanimi orodji za izboljšano funkcionalnost ter z železniškim podvozjem za učinkovito delovanje. Če iščete visokokakovostno stružnico, razmislite o EMAG VSC 400, ki jo prodajamo. Kontaktirajte nas za več informacij. • Nakladanje z gibanjem po tirnicah (avtomatizacija/nalagalec) Lredpfx Alsy Enpkj Njk Tehnične specifikacije Gnjena orodja: Da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 38.546 h, potovalna razdalja osi X: 745 mm, pomik po osi Z: 300 mm, moč vretenovega motorja: 18.000 W, največja hitrost vretena: 4.500 obr/min, skupna višina: 3.200 mm, skupna širina: 1.500 mm, skupna masa: 7.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840Dsl with integrated PLC S7-300, natančnost pozicioniranja: 1 mm, največja dolžina izdelka: 3.900 mm, število mest v zalogovniku orodij: 12, število osi: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control, a robust hydraulic 6-jaw chuck, and a turret with 12 tool positions. With a spindle speed of up to 4,500 rpm and a main spindle drive power of 28 kW at 40% duty cycle, it is ideally suited for precise and efficient machining. For further information about this vertical lathe, please contact us. Additional Equipment • EMAG hydraulic 6-jaw special chuck with face clamping device and central lubrication • 15-inch TFT monitor • V24 interface Machine Advantages Qualitative Machine Advantages • Machine operated in single-shift operation • Maximum ambient temperature: up to 30°C • Maximum humidity: 50% • Sound pressure level: 78 dB(A) • Second unit with YOM 2014 available Technical Machine Advantages • Spindle torque: 300 Nm Lrjdpfxey Ehcks Al Nok • VDI shaft diameter: 40 mm • Maximum speed of driven tools: 6,000 rpm • Maximum torque of driven tools: 40 Nm / 8.5 kW • Coolant system standard delivery pressure: 7 bar • Maximum delivery pressure: 7 bar • Internal coolant supply pressure range: 7 bar (not adjustable) • Coolant tank capacity: 360 liters • Chuck model: 6AGF 260 K6 K14 • Chuck diameter: 260 mm • Chuck weight: 57 kg • Maximum clamping force for I.D. clamping (50 bar): 12.8 kN • Maximum clamping force for O.D. clamping (50 bar): 4.2 kN Additional Information Machine still connected to power Dimensions Machine depth: 3,900 mm Technical Specification Driven tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 200 mm, - Območje vrtljajev: [1/min.] : 6.000 - Navor:[Nm]: 480 - Največji premer struženja nad ležiščem: 290 mm - Premer vpenjalne glave: 200 mm - Revolver: 12-pozicijski, VDI 40, Sauter - Pogonska orodja: 7,8 kW - Pomiki: - X-os: 550 mm - Z-os: 200 mm - Hitri pomik: (X/Z) [m/min] 30 / 20 - Pomik/feeds: (X/Z) [m/min.] 11 kN Lrjdsy Em Tbopfx Al Njk - Oprema: - Transportni trak za ostružke levo; širina 300 mm; izmetna višina 800 mm - Merilna tipala; neposredni linearni merilni sistem; Steklene merilne letve na vseh oseh - Heidenhain krožni prevzemni pomnilniški trak - Stroj z dovajalnim trakom za avtomatsko vstavljanje delov - Specifikacije: - Leta 2007 generalno obnovljeno za cca. 50.000 €, popolnoma zamenjana glava vretena. - Enota za podajanje zamenjana

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, potovalna razdalja osi X: 745 mm, pomik po osi Z: 300 mm, moč vretenovega motorja: 18.000 W, največja hitrost vretena: 4.500 obr/min, skupna višina: 3.200 mm, skupna masa: 7.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840Dsl, število osi: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28 kW output at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control unit and a robust 12-position EMAG flange turret, it ensures precise and efficient operation. With its special hydraulic chuck, it is ideal for machining workpieces up to 6 kg. For further information regarding this vertical lathe, please contact us. Additional Equipment • Coolant tank capacity: 360 liters Machine Advantages Technical Advantages • High working accuracy, rapid traverse rates, high maximum speed of driven tools • Machine from single-shift operation • Maximum ambient temperature: up to 30°C • Maximum humidity: 50% • Sound pressure level: 78 dB(A) Lsdpsytfppofx Al Nork Additional Information Machine still under power Technical Specification Through-spindle coolant: Yes Dimensions Machine depth: 3900 mm

Stanje: dober (rabljeno), Leto izdelave: 2002, Machine type: CNC lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Lredpfx Ajkyrwwel Nek Available immediately Located ex works for self-dismantling Optional: We can offer dismantling and loading services

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Two identical CNC machining centers by Emag are available, including a chip conveyor, coolant tank, various holders, chucks, and a new AGW. Chuck diameter: 200 mm, max. turning diameter: 290 mm, max. workpiece length: 140 mm, spindle speed: 6000 rpm, power: 34 kW, torque: 480 Nm. Travel X/Z: 550 mm/200 mm, rapid traverse X/Y: 30 m/20 m/min, feed force X/Z: 11 kN. Tool stations: 12, driven tool power: 7.8 kW. Machine dimensions X/Y/Z: approx. 2700 mm/1150 mm/2800 mm, weight: approx. 6500 kg. Documentation is available. On-site inspection is possible. Ledpfx Aewi Tpqjl Nerk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je kombiniran vertikalni CNC stružno-brušilni center EMAG. Premer vpenjalne glave: 250 mm, največji premer obdelave: 260 mm, pomik X/Z: 680 mm/200 mm, hitri pomik X/Z: 45 m/min/30 m/min, hitrost brusilnega vretena: 45000 vrt/min, število orodniških mest: 12, dimenzije košare X/Y: 400 mm/600 mm, število zloženih košar: 3. Dimenzije stroja X/Y/Z: cca 3200 mm/1900 mm/2650 mm, teža: cca 8000 kg, krmiljenje: Siemens 840DS, delovne ure: cca 35000 h, programske ure: cca 22000 h. Dokumentacija je na voljo. Ogled na lokaciji z električnim priklopom je mogoč. Lredex Dm Dzspfx Al Njk

Stanje: rabljeno, Leto izdelave: 2012, Premer struženja 400 mm Obodni premer 420 mm Hod X 850 mm Hod Z 315 mm Vretenova glava po DIN 55026 - velikost 11 Premer ležaja vretena 140 mm Največje število vrtljajev 4000 min⁻¹ Revolver za orodja 12-pozicijski C5 Capto Hitri pomik X + Z osi: 45 / 30 m/min Sila podajanja Z / X: 11 kN Skupna potrebna moč 58 kW Teža stroja pribl. 9 t Prostorska zahteva pribl. 9,5 x 4,5 x 3 m Ledpovxwx Aefx Al Njrk Trdo struženje Suha obdelava Transporter za ostružke Promot portal in Cellmaster Brez vpenjala Brez orodij Brez dodatne opreme za Cellmaster

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, število vreten: 2, največja hitrost vretena: 6.500 obr/min, potovalna razdalja osi X: 840 mm, pomik po osi Z: 425 mm, Dražba proizvodne linije z robotom in dvema paletizatorjema obdelovancev! TEHNIČNE PODROBNOSTI Lrodpfsyap Naox Al Nek Pomik osi X: maks. 840 mm Pomik osi Z: maks. 425 mm Premer dovoda: maks. 200 mm Hitrost vretena: 6.500 obr./min Kapaciteta paletizatorja obdelovancev: 24 nosilcev obdelovancev Število glavnih vreten: 2 Število revolverskih glav: 2 Število orodij na revolver: 12 PODROBNOSTI STROJA Visokotlačna črpalka: do 120 barov na linijo Teža stroja: 8.000 kg Hlajenje: hlajenje vretena in postelje stroja OPREMA Robot M6iB Sistem za transport obdelovancev Heilig Automation z 2 prevzemnima postajama Visokotlačna črpalka do 120 barov na linijo Rezkalnik ostružkov Paletizator obdelovancev s kapaciteto za 24 nosilcev obdelovancev

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Two identical Emag VSC 200 machines are available: X-axis travel: 685 mm, Z-axis travel: 160 mm, chuck diameter: 200 mm, swing diameter: 290 mm, connected load: 29 kW, control: SIEMENS SINUMERIK, length: 2,700 mm, width: 1,150 mm, height: 2,800 mm, weight: 6.5 t, complete with documentation. Lsdpfem H Urhjx Al Nerk

Stanje: dober (rabljeno), Leto izdelave: 1998, Emag VSC 200 with workpiece circulation conveyor and chip conveyor. The main spindle bearings were replaced in 2005. Control system: Siemens 840D Turning diameter: Ø 260 mm. Lrjdpfxstq Ifno Al Nsk Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, Width: 1,800 mm, Height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only operated in 1-2 shift operation.

Stanje: rabljeno, Leto izdelave: 2015, Technical details: Turning diameter: 200 mm Swing diameter: 260 mm Turning height: 60 mm Lredpfsq Sc Huox Al Njk

Stanje: rabljeno, Leto izdelave: 2004, Turning diameter 250 mm Turning length 100 mm Control SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7500 kg Required space approx. m E M A G Lredpst Hxa Tsfx Al Nsk Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece feeder Type VSC 250 DS Year of construction 2004 # M7 28.69324 Max. turning diameter 250 mm Turning length inside/outside approx. 100 mm Workpiece length min./max. 29 – 100 mm 6-position tool turret diameter or swing circle 480/790 mm Slide travels X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm Feed / rapid traverse X/Z 45 / 30 m / min. Feed force X/Z 5.5 / 11 kN Spindle speeds 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight 7,500 kg Accessories / Special equipment • CNC path control SIEMENS 840 D with color screen, graphics, menu-guided dialog programming, all common options, cycles and subprograms, etc. • 6-station tool turret with 6 tool holders (diam. 40 mm) without motorized drive, but as a swivel axis (B-axis), double bearing and with direction logic • 2 GMN grinding spindles on turret positions T 3 and T 6, speeds approx. 42,000 rpm and 18,000 rpm, fitted once with CBN wheel and once with ceramic pin • Workpiece feed unit with circulation system via drag frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device for dimensional and final measurement during workpiece changeover • NORGREN air gap measuring device (?), hydraulic weight compensation for main spindle • SMW-Autobloc 3-jaw diaphragm chuck (for easier gripping of raw parts) approx. Ø 250 mm, with clamping force monitoring • HYFRA recooling unit for main spindle cooling and thermal stabilization of the machine frame, sophisticated SEITZ paper band filter system and extendable chip conveyor, coolant radiator for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Vertical CNC turning machines offer a thermally stable design (chips do not fall into the machine bed) and fast workpiece changeover times (pick-up system via main spindle) and a stable tool arrangement that also enables non-turning operations. Here, hardened gears were hard-turned and ground. Condition: good - ready for demonstration shortly Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, A vertical turning and grinding center EMAG VSC 250 DS is being offered. The machine undergoes a complete mechanical overhaul and rebuild by EMAG. Lrodpeh Tkdqofx Al Nok Depending on requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, parts turner) and additional peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm Travel X-axis: 860 mm Travel Z-axis: 200 mm MAIN SPINDLE Power: 28 kW TOOL TURRET EMAG disc-type turret, 12x VDI 40 Bracket with grinding spindle 18 kW, 45,000 rpm Delivery time and additional equipment upon request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Offered is a double-spindle pick-up lathe EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine allows for either simultaneous machining of 2 identical workpieces with the same operation, or sequential machining of one workpiece in two consecutive processes. Depending on requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL SYSTEM Siemens 840 Dsl TECHNICAL DATA Workpiece diameter: max. 440 mm Workpiece height: max. 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIERS Lrjdpfot Du Tdsx Al Njk 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 685 mm, pomik po osi Z: 200 mm, premer obdelovanca (maks.): 200 mm, višina obdelovanca (maks.): 150 mm, premer struženja nad ležiščem sani: 250 mm, The machine has been thoroughly cleaned and newly painted! TECHNICAL DETAILS Machining Area Workpiece diameter: max. 200 mm Workpiece height: max. 150 mm Swing diameter: 250 mm Axes X-axis travel: 685 mm Z-axis travel: 200 mm Main Spindle Main spindle power: 28 kW Main spindle speed: max. 6,000 rpm Lrodew Hzupopfx Al Nok MACHINE DETAILS Control: Siemens Powerline EQUIPMENT Chip conveyor 1x disc turret, 12x D40

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 4.500 mm, skupna višina: 3.200 mm, Offered is a double-spindle pick-up lathe EMAG VSC 250 DUO. There are 2 almost identical machines of this type available. Each machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine is capable of either machining 2 identical workpieces with the same operation simultaneously, or producing one workpiece in two consecutive machining steps. The VSC 250 DUO will be completely overhauled before delivery and will receive a control system upgrade to Siemens Sinumerik ONE. If required, the machine can be equipped with further peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: max. 250 mm Workpiece height: max. 150 mm Chuck diameter: 250/315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm TOOL CARRIERS Work area 1: 1x EMAG disc turret, 12x VDI 50 stations, no driven tools Ljdpfx Aer Nc Ufol Njrk Work area 2: 1x EMAG disc turret, 12x VDI 50 stations, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2023, A mechanically and electrically overhauled vertical pick-up turning center VSC 250, refurbished by EMAG, is being offered. The control system has been upgraded to Siemens Sinumerik One. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, turnover device) and additional peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm Travel X-axis: 860 mm Ljdpjrq Damofx Al Nerk Travel Z-axis: 200 mm MAIN SPINDLE Power: 28 kW TOOL CARRIER EMAG disc-type turret, 12x VDI 40 Delivery time and additional equipment for the machine to be agreed upon.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, Offered is a vertical turning center EMAG VSC 400 DD. The VSC 400 DD will be mechanically overhauled by EMAG prior to delivery. If required, the machine can be equipped with additional peripherals (coolant system, external automation, etc.). This lathe for automated machining of chuck parts is ideal for processing series components with the following dimensions: Workpiece diameter: 340 mm Workpiece height: 160 mm Optionally, the VSC 400 DD can also be fitted with an additional milling and/or grinding spindle. CONTROL Siemens 840Dsl TECHNICAL DATA Chuck diameter: max. 400 mm Swing diameter: max. 420 mm Travel X-axis: 850 mm Travel Y-axis: 315 mm Travel Z-axis: 315 mm TOOL CARRIER EMAG disc-type turret, 12x VDI 50 for driven tools Delivery time and additional equipment for the machine available upon request. Lrodpfxetngg Us Al Nsk

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, A mechanically refurbished vertical pick-up turning center VSC 250 by EMAG is being offered. All control components of the Siemens 840 Dsl CNC system have been tested. Depending on your requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, part turner) and additional peripheral equipment such as chip conveyors, coolant systems, etc. CONTROL SYSTEM Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-axis travel: 860 mm Z-axis travel: 200 mm MAIN SPINDLE Power: 28 kW TOOL TURRET Lrodpfxsh Ryp Se Al Nsk EMAG disc-type turret, 12 stations, VDI 40 Delivery time and additional machine options upon request.

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Ljdpfeia Rtdsx Al Nsrk Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, TECHNICAL DATA - Max. turning diameter: 520 [mm] - Travels (X/Z): 1000 / 400 [mm] - Max. feed force on X and Z: 1100 [daN] - Rapid traverse (X/Z): 45 / 30 [m/min] - Ball screw diameter (X/Z): 50 [mm] - Spindle nose: A2-11 - Spindle motor power: 71 [kW] Lredpfx Alsuhbfgs Nek - Spindle speeds: 0 - 3400 [rpm] - Max. chuck torque: 750 [Nm] - Number of positions on turret: 12 - Number of driven positions: 12 - Toolholder type: VDI50 - Machine dimensions: 4,050 x 1,960 [mm] - Installation footprint: 8,500 x 5,000 [mm] - Machine weight: 13,500 [kg] - Installed power: 45 [kW] - Electrical supply: 400 V, 50 Hz EQUIPMENT - SIEMENS 840D CNC - RS232 / RJ45 / USB - 1 piece Marposs touch probe - 1 fixed tool post on table: Capto C6 - Coolant tank - High-pressure coolant pump: 23 [bar] - Cooling unit - KNOLL chip conveyor - Workpiece feeder capacity: 70 - 320 [mm] - Number of driven toolholders: 6 - Number of fixed toolholders: 6 - 3-jaw Forkhardt chuck Ø: 400 [mm]

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 72.284 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 685 mm, dolžina podajanja os Z: 200 mm, potovalna razdalja osi X: 685 mm, pomik po osi Z: 200 mm, zunanji premer vpenjalne glave: 250 mm, hitro pomikanje X-os: 45 m/min, hitri pomik na osi Z: 30 m/min, skupna dolžina: 3.100 mm, skupna višina: 2.650 mm, skupna širina: 4.000 mm, največja hitrost vrtenja: 6.000 obr/min, vrtilni moment: 460 Nm, skupna masa: 7.800 kg, model krmilnika: Siemens 840D, vrsta upravljanja: CNC krmiljenje, Oprema: hladilna enota, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-conveyor) - Pneumatically controlled transfer device Lodpfjw Dyqdsx Al Nerk - Punching unit - Chip conveyor (discharge to the left) - Coolant system - Tool turret with 12x VDI40 holders The machine is currently under power and available for inspection.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M250.81009, Caracteristici tehnice: # Acționare principală: * Putere conectată: 400 V/50 Hz / 43 kW * Puterea motorului arborelui principal (100% ED / 40% ED): 18 kW / 28 kW * Cuplu arbore principal: 300 Nm * Plaja de rotații: 0-4500 rpm * Cap arbore: DIN 55026-A6 # Zonă de lucru: * Avans rapid axa X: 60 m/min * Avans rapid axa Z: 30 m/min * Forță de avans axa X: 10 kN * Forță de avans axa Z: 10 kN # Comandă numerică: * Siemens SINUMERIK 840Dsl * Monitor TFT 15 inch. # Precizie de lucru: * Axe (X / Z): ±0,001 mm * Arbore (axa C): ±0,01° # Portscule: * Turela cu flanșă EMAG generația C361 - Capto C5 * Diametru corp portsculă: TN340009 * Dimensiuni maxime sculă: dependente de piesă * Timp schimbare sculă (turelă / sculă antrenată): 0,03 min / 0,04 min * Turație maximă sculă antrenată: 6000 rpm * Cuplu maxim sculă antrenată (100% ED / 10% ED): 15 Nm/3,5 kW / 40 Nm/8,5 kW # Sistem de răcire: * Presiune livrare standard / maximă: 7 bar * Interval presiune răcire internă: 7 bar (neajustabilă) * Capacitate rezervor lichid de răcire: 360 litri # Dispozitiv colector piese: * Nu există colector piese; piesele sunt încărcate și evacuate automat din utilaj # Condiții ambientale (temperatură / umiditate): până la cca 30°C / max. 50% * Nivel zgomot (Presiune / Putere acustică): 78 dB(A) # Generalități: * Dimensiuni mașină (L x l x h): 3900 mm x 1500 mm x 3200 mm * Greutate: aprox. 7000 kg Principalele funcții și caracteristici: # Construcție verticală: Evacuare optimă a șpanului și acces facil la încărcare/descărcare. # Comandă: Siemens SINUMERIK 840Dsl cu PLC integrat S7-300 și monitor TFT de 15 inch. # Precizie ridicată: Precizie de poziționare pe axe X și Z de ±0,001 mm. # Arbore principal: Putere mare și plajă largă de viteze de rotație. # Automatizare: Încărcarea și descărcarea pieselor se realizează prin automatizare integrată. # Scuri antrenate (live tools): Extind gama de prelucrare pentru operații de găurire și frezare. Ledpjxvx T Sjfx Al Nerk # Transportor de șpan. # Menghină expansibilă EMB3 Autoblock instalată pe mandrină. # Portscule Capto C5 pe turelă (prelucrare externă/internă 2 bucăți & 2 scule antrenate). # Monitorizare sarcină scule cu funcția Artis disponibilă.