Igs Vodni Čistilec nakup rabljenega (992)

Stanje: skoraj kot novo (rabljeno), Induktivni senzor IFM IG-2008-ABOA ali IG0006 Kodpfx Absw U Ax Rsbewt

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, WORKSHOP PRESSURE WASHER MP150 Kodpsvugwmjfx Abbowt Features: Washing is performed in a closed circuit using a cleaning liquid. The detergent is dispensed from the gun nozzle at pressures up to 8 bar, which enables thorough cleaning of hard-to-reach areas and heavily soiled parts contaminated with carbon deposits, grease, or oils. The washer is ideally suited for turbocharger refurbishment and for cleaning heavily soiled components made of steel, cast iron, aluminium, and other alloys. The washer lid is equipped with pneumatic actuators, enhancing safety and work quality. The cabin is standardly equipped with work area lighting. The washer features a dual-function gun capable of dispensing either air only or air mixed with the cleaning agent. The cleaned item can be dried with compressed air. * Please note: the washer is supplied for self-assembly. Technical data Capacity: 160L Detergent tank capacity: 8-14 L Operating pressure: 5-8 bar Weight: 29 kg Air regulation Pneumatic spray gun Illuminated cabin Work ventilation Dimensions: 770x610x700mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, A workshop parts washer is a versatile tool that should be present in every service shop, garage, or workshop. This indispensable equipment ensures fast and cost-effective removal of dirt and grime. A major advantage is the ability to use the washer indoors. A cabin parts washer guarantees effective removal of all contaminants—from oils to hard-to-reach deposits—while ensuring the safety and long-term performance of your components. The applied technology not only ensures cleanliness but also provides protection against corrosion. Please note that cleaning results will depend on the type of detergents used. The parts washer is designed to use up to 90 litres of cleaning agent, with a maximum tank capacity of 140 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates within a flow rate range of 2.7 to 3.6 litres per minute, providing thorough cleaning of surfaces, including fine cracks, with a powerful jet. The cleaning fluid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer is equipped with four legs for stable operation and an optimised working height. The lid locks automatically when opened. Additionally, the unit features a work surface below the basin level, useful for placing cleaning accessories or washed parts to let them dry. The unit requires self-assembly. Technical specifications: Tank capacity: 140 L Max. cleaning fluid volume: 90 L Max. pump capacity: 2.7–3.6 L/min Kwedpfxorh Ey Rs Abbet Power supply: 230 V Dimensions: 1130x540x885 mm Tray dimensions: 800x500 mm Weight: 43 kg Power supply: 230 V Self-assembly required. Price shown is NET, exclusive of transport costs. For more information, please contact us by phone or email. Feel free to visit our website to explore our full offer.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables quick and cost-effective removal of contaminants. A significant advantage is the ability to use the washer indoors. Kedpfxeuc Tn Ao Abbswt The washing process is performed in a closed circuit, using a cleaning fluid heated up to 70°C. The solution is delivered through a spray gun nozzle at a pressure of up to 8 bar, thoroughly cleaning even hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oil. Both temperature and cleaning fluid significantly increase washing effectiveness. The unit features adjustable feet for leveling. The washer is highly effective for turbocharger reconditioning and for cleaning heavily soiled parts made of steel, cast iron, aluminum or other alloys. The washer lid is equipped with pneumatic cylinders, enhancing safety and ease of use. The washer features a dual-function spray gun: it can deliver only air or air mixed with cleaning fluid. Cleaned parts can be dried using compressed air. The washer is equipped with an intuitive control panel. - Adjustable water temperature - Smooth air pressure regulation - Manometer - Separate switch for detergent/water heating - Separate power switch Technical specifications: - Capacity: 160 L - Detergent heating: up to 70°C - Fluid tank capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg - Dimensions: 770 × 600 × 1330 mm - Adjustable air supply - Pneumatic spray gun - Illuminated cabin - Ventilation Please note: the parts washer is supplied for self-assembly. Price does not apply to machines purchased in Poland.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! Kwedpfx Abor Eqbyobjt First Warranty Inspection Completely Free: Special offer valid only for customers who attended a demonstration before purchase – in the Otinus Machinery Showroom in Bydgoszcz. Handheld Laser Cleaner “3000W LCH-3000-N” The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to either vaporize or dissolve. Laser cleaners are used in various industries, from automotive to heritage conservation. These machines stand out for their high efficiency, minimal waste, and minimal interference with the surface of the cleaned object. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: A one-day training session and machine installation – up to 8 hours: installation and training relating to the control unit. Choice of MAX Photonics The brand “MAX Photonics” was established in 2004. The company originated with the production of light and optical sources for scientific institutes. Top priority was given to product quality and operational stability. The company quickly realised that the future of laser technology is closely linked to fiber optics. Research and development, begun in 2007, led to the market introduction of their first 500 CW source in 2014. Since then, the company has been expanding its technologies intensively in the areas of laser cutting, welding, marking, and engraving. Currently, the company offers sources with output up to 40,000 W. At present, its goal is to become a leader in the production of high-power industrial lasers. Raycus “Wuhan Raycus Fiber Laser” was founded in 2007. The company focused on independent research and development, strengthened by mergers with other enterprises. It manufactures laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer only for customers who attended a demonstration before purchase – at the Otinus machinery showroom in Bydgoszcz. Handheld Laser Cleaner “1500W LCH-1500-N” The laser cleaner is an innovative device for precise and efficient surface cleaning. It focuses a laser beam on contaminants, causing them to evaporate or dissolve. Laser cleaners are used across various industries, from the automotive sector to heritage conservation. These devices are distinguished by their high efficiency, minimal waste, and limited interference with the surface of the cleaned object. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: A one-day training session and machine installation, 1 day up to 8 hours – installation and training related to the control unit Options MAX Photonics The “MAX Photonics” brand was established in 2004. The company’s origins lie in the production of light and optics sources for scientific institutes. Quality and stability of product operation were set as the primary goals. The company quickly recognized that the future of laser technology is closely tied to fiber optics. Research and development that began in 2007 led to the 2014 market launch of their first 500-CW source. Since then, the company has actively expanded its technologies in laser cutting, welding, marking, and engraving. Currently, the company offers sources with an output of up to 40,000 W. At present, the company strives to become a leader in the production of ultra-high-power industrial lasers. Kodpfx Aothitpsbbowt Raycus The company “Wuhan Raycus Fiber Laser” was founded in 2007. It is focused on independent research and development, bolstered by mergers with other companies. They manufacture laser sources for a wide range of applications – i.e., cutting, welding, soldering, marking, and engraving. Devices of this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer only for customers who attended a demonstration prior to purchase – at the Otinus machinery showroom in Bydgoszcz. Handheld Laser Cleaner “1000W LCH-1000-N” The laser cleaner is an innovative device designed for precise and efficient surface cleaning. It focuses a laser beam on contaminants, causing them to vaporize or disintegrate. Laser cleaners are used across various industries, ranging from the automotive sector to heritage conservation. These units are distinguished by high efficiency, minimal waste, and limited interference with the surface of the object being cleaned. Compared to traditional cleaning methods, a laser cleaner can be more precise and economical. The following services are included in the machine price: A 1-day training and machine installation, 1 day up to 8 hours – installation and training related to the control unit Choice of Laser Source MAX Photonics The brand "MAX Photonics" was established in 2004. The company initially specialized in the production of light and optical sources for scientific institutes. Top priorities were set on product quality and operational reliability. MAX Photonics quickly recognized that the future of laser technology was closely linked to fiber optics. Research and development initiated in 2007 led to the market launch of their first 500-CW source in 2014. Since then, the company has been rapidly developing its technologies in laser cutting, welding, marking, and engraving. The current product range includes sources with output power up to 40,000 W. At present, the company aims to become a leader in the field of ultra-high-power industrial laser production. Raycus Founded in 2007, Wuhan Raycus Fiber Laser focuses on independent research and development, leveraging mergers with other companies. The company manufactures laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries. Kjdpfx Aethithsbbswt

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free: Special offer only for customers who participated in a demonstration before purchase – in the Otinus machine showroom in Bydgoszcz. Handheld Laser Cleaner “2000W LCH-2000-N” The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to evaporate or disintegrate. Laser cleaners are used in a wide range of industries, from automotive to monument restoration. These systems are characterized by high efficiency, minimal waste production, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can offer greater precision and cost-effectiveness. The following services are included in the machine price: Kwodpfx Abjthittebot A one-day training session and machine installation; 1 day, up to 8 hours – installation and training concerning the control unit. Options MAX Photonics The “MAX Photonics” brand was founded in 2004. The company’s roots lie in the production of light and optical sources for scientific institutions. Quality and stability of product performance were defined as top priorities. The company quickly realized that the future of laser technology is closely linked to fiber optics. Research and development began in 2007, leading to the launch of its first 500W continuous wave source in 2014. Since then, the company has significantly expanded its technologies in the fields of laser cutting, welding, marking, and engraving. The company currently offers sources with output powers up to 40,000 W. At present, the company aims to be a leader in manufacturing industrial lasers with ultra-high power. Raycus “Wuhan Raycus Fiber Laser” was established in 2007. The company focuses on independent research and development, resulting from mergers with other firms. They produce laser sources for a wide range of applications including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. Kwjdpfx Abjxgq I Nsbot

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Standardna perforacija sita: 2,5 mm okrogle odprtine Ksdpfx Ajxgr Rfsbbswt S klinastim jermenskim pogonom

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Kwodpsxgtrqofx Abbjt Standardna perforacija sita: 2,5 mm okrogle odprtine S klinastim jermenskim pogonom

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), Kedoxgttzepfx Abbewt Throughput depending on material type approx. 0.5–2 t/h Drive power 30 kW A total of four dryers of this model are available.

Stanje: rabljeno, Dry cleaner/friction cleaner with 110 kW drive power. Throughput up to 4 t/h, depending on type of plastic and material thickness. Kwedpfx Aboxgq Sbjbot

Stanje: dober (rabljeno), Leto proizvodnje 2008, 3160 delovnih ur, servis opravljen na novo, zelo dobro vzdrževan, NOVA HD črpalka pri FALCH-u. Kwedswy Elljpfx Abbot

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, skupna masa: 230 kg, temperatura: 140 °C, The MH-8P 180/2000 model is the ideal machine for medium and large industrial facilities where cleanliness is the highest priority. This hot water high-pressure cleaner is also widely used in transportation companies, automotive workshops, and agriculture. Private customers who demand top washing quality also appreciate its performance. Kwedpfx Aswqw Tpebbet Hot water high-pressure cleaners are particularly recommended for environments dealing with grease or oil contamination. With water temperatures above 70°C, cleaning tasks can be accomplished up to five times faster than with cold water pressure washers! Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Showroom unit Year of manufacture: 2016 Power supply (~/V/Hz): 3 / 400 / 50 Pump capacity (l/h): 2000 Operating pressure (bar): 180 Maximum pressure (bar): 250 Maximum water temperature (°C): 70–140 Power consumption (kW): 12 Power cable (m): 5 Fuel tank (l): 32 Chemical tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-pressure gun: Nilfisk Ergo 3000 – 250 bar – 150°C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155°C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat spray power nozzle. Flat high-pressure spray with a wide cleaning area and excellent dirt removal capability. External control panel: Wired Schneider Electric remote control for machine operation without having to approach the unit. Key Features: Easily accessible water filter protects the pump from water impurities. Integrated water softening system prevents limescale buildup on the heating coil. Convenient handles on the housing plus integrated nozzle storage Open oil system – no operating time restrictions Two integrated chemical tanks allow dosing of cleaning agents directly through the machine Clear and intuitive control panel The simple design and easy access to key components make the machine both user-friendly and service-friendly.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, gorivo: elektrika, skupna masa: 131 kg, trajanje garancije: 6 meseci, The Nilfisk MH 5M - 180/800 E24 o high-pressure cleaner is a highly efficient unit designed for even the toughest jobs in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine in every function. All mechanical components subject to wear were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This guarantees long-lasting, trouble-free operation without the need for further investment in the machine in the future. Product Advantages: Kwsdpjv N Hqvjfx Abbst The unit comes with brand new accessories, including a R+M German-brand gun, stainless steel lance, reinforced steel-braided hose, and a 25° power nozzle. The fully electric hot water system enables operation in locations where exhaust emissions are prohibited. A robust brass pump head with new ceramic pistons and seals guarantees long life and reliable operation. The powerful, efficient 3-phase motor delivers excellent performance. With operating parameters of 180 bar and 740 l/h, the machine is highly effective for heavy-duty applications in construction, logistics, and agriculture. Every machine we offer is individually photographed — you purchase exactly the unit shown. Technical Data: Supply voltage [V]: 400 ~3 phase Pump output [l/h]: 740 Operating pressure [bar]: 150 Max. heating temperature [°C]: 80 Heater power consumption [kW]: 24 Motor power consumption [kW]: 5 Detergent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 131 Equipment: NEW R+M German-brand spray gun NEW 900mm stainless steel spray lance NEW reinforced 10m steel-braided hose NEW 25° power nozzle Water filter and GEKA hose connector included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 160 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, gorivo: elektrika, skupna masa: 122 kg, trajanje garancije: 6 meseci, temperatura: 85 °C, The Kärcher HDS-E 8/16-4M high-pressure cleaner is a highly efficient machine, suitable even for the most demanding tasks in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly tested every function of the machine. All mechanical parts showing signs of wear or abrasion were replaced with new components, including: ceramic pistons, seals, bearings, and all O-rings. This ensures long-term, trouble-free operation without the need for further investment in the machine in the future. Product advantages: - Year of manufacture: 2018 - The unit comes with brand new accessories, including a German-made R+M trigger gun, stainless steel lance, braided high-pressure hose, and a 25° power nozzle. - Durable brass head with new ceramic pistons and seals ensure long-lasting, uninterrupted performance - Fully electric hot water system enables operation in locations where emissions are not permitted. - The powerful and efficient 3-phase motor guarantees excellent performance. - With an operating pressure of 160 bar and a flow rate of 760 l/h, the machine is ideal for heavy-duty cleaning in construction, logistics, and agriculture. - Each unit we offer features its own set of unique photos—you buy exactly the machine you see. Technical data: Power supply [V]: 400 ~ 3 phases Pump output [l/h]: 760 Working pressure [bar]: 160 Max. heating temperature [°C]: 85 Boiler power [kW]: 36 Total connected load [kW]: 41.5 Hose length [m]: 10 Kwedpfx Aev N H Sgebbot Chemical tanks [l]: 10+20 Weight [kg]: 122 Equipment: - NEW R+M German brand trigger gun - NEW 900 mm stainless steel lance - NEW reinforced 10 m high-pressure hose with steel mesh - NEW 25° power nozzle Water filter and GEKA coupling are included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 150 letvica, dolžina visokotlačne cevi: 10.000 mm, lastna masa: 100 kg, vhodna napetost: 400 V, trajanje garancije: 6 meseci, The Kärcher HDS 801 E high-pressure cleaner is a highly efficient unit, designed for the toughest tasks in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine for all functions. All mechanical components showing signs of wear were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting and trouble-free operation, with no future investment required in the machine. Product Advantages: - The unit comes equipped with new accessories, such as a spray gun from German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. - HDS-E units with electric water heating are primarily designed for use in environments where exhaust emissions are prohibited or harmful. - A robust brass head with new ceramic pistons and seals guarantees longevity and reliable operation. - The powerful and efficient 3-phase motor delivers outstanding performance. - With operating parameters of 150 bar and 740 l/h, the machine is highly effective for demanding applications in construction, logistics, and agriculture. - Every device we offer features customized photographs—you purchase exactly the machine shown. Technical Specifications: Supply Voltage [V]: 400 ~ 3-phase Pump Capacity [l/h]: 740 Operating Pressure [bar]: 150 Max. Heating Temperature [°C]: 85 Boiler [kW]: 24 Total Power Consumption [kW]: 29.6 Hose Length [m]: 10 Detergent Tank [l]: 20+25 Weight [kg]: 100 Equipment: - NEW pressure gun from German brand R+M - NEW 900mm stainless steel pressure lance - NEW reinforced 10m steel-braided hose Kjdpfx Abew I Dacsbswt - NEW 25° power nozzle - Water filter and GEKA coupling included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 150 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, skupna masa: 100 kg, trajanje garancije: 6 meseci, temperatura: 85 °C, The Kärcher HDS 801 E high-pressure cleaner is a highly efficient unit, designed for the toughest tasks in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine for all functions. All mechanical components showing signs of wear were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting and trouble-free operation, with no future investment required in the machine. Product Advantages: - The unit comes equipped with new accessories, such as a spray gun from German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. - HDS-E units with electric water heating are primarily designed for use in environments where exhaust emissions are prohibited or harmful. - A robust brass head with new ceramic pistons and seals guarantees longevity and reliable operation. - The powerful and efficient 3-phase motor delivers outstanding performance. - With operating parameters of 150 bar and 740 l/h, the machine is highly effective for demanding applications in construction, logistics, and agriculture. - Every device we offer features customized photographs—you purchase exactly the machine shown. Technical Specifications: Supply Voltage [V]: 400 ~ 3-phase Pump Capacity [l/h]: 740 Operating Pressure [bar]: 150 Max. Heating Temperature [°C]: 85 Boiler [kW]: 24 Total Power Consumption [kW]: 29.6 Hose Length [m]: 10 Detergent Tank [l]: 20+25 Weight [kg]: 100 Kwjdpfx Absv Umvpjbjt Equipment: - NEW pressure gun from German brand R+M - NEW 900mm stainless steel pressure lance - NEW reinforced 10m steel-braided hose - NEW 25° power nozzle - Water filter and GEKA coupling included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 160 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, gorivo: elektrika, skupna masa: 122 kg, trajanje garancije: 6 meseci, temperatura: 85 °C, The Kärcher HDS-E 8/16-4M high-pressure cleaner is a highly efficient unit, designed to handle even the toughest tasks in large-scale facilities. During a comprehensive inspection and refurbishment, our service team checked the machine thoroughly for every function. All mechanical components showing signs of wear and tear were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures a long, trouble-free operation with no further investment required in the future. Product advantages: - The unit comes with new accessories, including an R+M German brand spray gun, stainless steel lance, steel-reinforced hose, and a 25° power nozzle. - Robust brass pump head with new ceramic pistons and seals for extended, trouble-free operation - Fully electric hot water heating enables work in sites where exhaust emissions are not allowed. - The powerful and efficient 3-phase motor delivers excellent performance. - Operating parameters of 160 bar and 760 l/h make the machine ideal for demanding applications in construction, logistics, and agriculture. - Each unit we offer comes with individually taken photos – you buy exactly the machine you see. Technical data: Supply voltage [V]: 400 ~ 3 phase Pump capacity [l/h]: 760 Operating pressure [bar]: 160 Max. heating temperature [°C]: 85 Boiler power [kW]: 36 Total connected load [kW]: 41.5 Hose length [m]: 10 Detergent tanks [l]: 10+20 Weight [kg]: 122 Equipment: - NEW R+M German brand spray gun - NEW 900mm stainless steel lance - NEW reinforced 10m hose with steel mesh - NEW 25° Power nozzle A water filter and GEKA connector are included free of charge in the set. Kwsdpfx Abov N Ikwsbot Key features: - Open oil system – no limitation on operating time - Integrated chemical tank allows for direct dosing of cleaning agents from the machine - Very clear and intuitive control panel - Simple design and easy access to all components make the machine user- and service-friendly. - The RM110 water softener prevents corrosion and limescale build-up in the heating coil and other pipes.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 150 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, gorivo: elektrika, trajanje garancije: 6 meseci, temperatura: 85 °C, The high-pressure cleaner Kärcher HDS 801 E is an extremely efficient unit, ideal for demanding jobs in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly checked the machine for full functionality. All mechanical parts showing wear or damage were replaced, including: ceramic pistons, seals, bearings, and all O-rings. This ensures a long and trouble-free operation, with no additional investments required for the machine in the future. Product advantages: - The unit comes with brand new accessories, including a spray gun from the German manufacturer R+M, a stainless steel lance, a reinforced high-pressure hose with steel braiding, and a 25° power nozzle. - HDS-E units with electric water heating are specifically designed for use in areas where emissions are prohibited or hazardous. - Durable brass pump head equipped with new ceramic pistons and seals ensures long-lasting and reliable operation. - The powerful and efficient 3-phase motor delivers excellent performance. - With operating parameters of 150 bar and 740 l/h, the machine is highly effective for heavy-duty use in construction, logistics, and agriculture. - Each unit we offer comes with individual photos—you purchase exactly the machine you see. Technical specifications: Supply voltage [V]: 400 ~ 3-phase Pump output [l/h]: 740 Working pressure [bar]: 150 Max. heating temperature [°C]: 85 Boiler power [kW]: 24 Total installed power [kW]: 29.6 Hose length [m]: 10 Detergent tank capacity [l]: 20+25 Weight [kg]: 100 Equipment: NEW spray gun from German brand R+M NEW 900mm stainless steel lance NEW reinforced 10m high-pressure hose with steel braiding Kwsdpfov Srrqox Abbst NEW 25° power nozzle Water filter and GEKA connector included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, dolžina visokotlačne cevi: 10.000 mm, lastna masa: 130 kg, vhodna napetost: 400 V, trajanje garancije: 6 meseci, The Kärcher HDS SUPER M Eco high-pressure washer is a highly efficient machine, ideally suited for even the toughest tasks in large-scale facilities. During a comprehensive inspection and overhaul, our service team meticulously checked the unit for full functionality. All mechanical components subject to wear were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting and trouble-free operation, with no further investment required in the future. Product Advantages: - The machine is supplied with brand new accessories, including a spray gun from German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. - A robust brass pump head with new ceramic pistons and seals guarantees reliable, long-term performance - The powerful and efficient 3-phase motor delivers excellent performance values. - With operating parameters of 180 bar and 900 l/h, this unit is ideal for demanding applications in construction, logistics, and agriculture. - Every machine we offer comes with individually taken photos; you purchase precisely the item shown. Technical Data: Supply voltage [V]: 400 ~ 3 phase Pump output [l/h]: 900 Working pressure [bar]: 180 Max. heating temperature [°C]: 85 / 155 Connected load [kW]: 6.4 Hose length [m]: 10 Detergent tank [l]: 20 Weight [kg]: 130 Equipment: - Brand new spray gun from German brand R+M - New 900 mm stainless steel lance - New reinforced 10 m steel-braided hose - New 25° power nozzle Kwedpfx Absxbb A Hobst - Water filter and GEKA coupling included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, skupna masa: 155 kg, trajanje garancije: 6 meseci, The Kärcher HDS 1195 S Eco high-pressure cleaner is a highly efficient machine, also suitable for the toughest tasks in large-scale facilities. During comprehensive inspection and refurbishment, our service team thoroughly checked the machine for all functions. All mechanical components showing wear were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting, trouble-free operation without the need for further investment in the future. Product Benefits: The unit is supplied with brand new accessories, including a German-made R+M trigger gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. Robust brass pump head with new ceramic pistons and seals guarantees long-lasting, trouble-free performance. The powerful and efficient 3-phase motor delivers excellent performance. Thanks to its operating parameters—180 bar pressure and 1200 l/h flow rate—the machine is ideal for tough applications in construction, logistics, and agriculture. Each machine we offer features its own individual photos; you will purchase exactly the machine shown. Technical Specifications: Supply voltage [V]: 400 ~ 3 phase Pump capacity [l/h]: 1200 Working pressure [bar]: 180 Max. heating temperature [°C]: 85 / 155 Power input [kW]: 8.2 Hose length [m]: 10 Fuel tank [l]: 25 Chemical tank [l]: 20+17 Weight [kg]: 155 Equipment: New pressure gun from German brand R+M New 900mm stainless steel pressure lance New reinforced 10m hose with steel braid Kwodow Dc Huspfx Abbst New 25° power nozzle Water filter and GEKA coupling included free of charge.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 200 letvica, dolžina visokotlačne cevi: 10.000 mm, skupna masa: 168 kg, trajanje garancije: 6 meseci, temperatura: 155 °C, The Kärcher HDS 10/20-4M high-pressure cleaner is a highly efficient machine, suitable for even the most demanding tasks in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly checked all functions of the unit. All mechanical components showing wear or signs of use were replaced with new parts, including ceramic pistons, seals, bearings, and all O-rings. This ensures a long, trouble-free operation with no additional future investment required for the machine. Product Advantages: - Year of manufacture: 2018 - The equipment comes with brand-new accessories, including a German-made R+M trigger gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. - Robust brass pump head with new ceramic pistons and seals guarantee long-lasting, reliable performance - The powerful and efficient 3-phase motor delivers outstanding performance. - With operational parameters of 200 bar and 1000 l/h, this machine is ideal for demanding work in construction, logistics, and agriculture. - Each machine we offer is photographed individually—you buy exactly the unit you see. Technical Specifications: Model: HDS 10/20-4M Kjdpswhu R Tjfx Abbswt Supply voltage: 400V ~ 3-phase Pump capacity (l/h): 500 - 1000 Working pressure (bar): 30 - 200 Max. water heating temperature (°C): 80-155 Power rating (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 Equipment: - NEW German-made R+M trigger gun - NEW 900mm stainless steel lance - NEW reinforced 10m steel-braided hose - NEW 25° power nozzle - Water filter and GEKA coupling included free of charge in the set.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 200 letvica, dolžina visokotlačne cevi: 10.000 mm, vhodna napetost: 400 V, skupna masa: 168 kg, trajanje garancije: 6 meseci, temperatura: 155 °C, The high-pressure cleaner Kärcher HDS 10/20-4M is a highly efficient unit, suitable even for the toughest tasks in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly checked every function of the machine. All mechanical parts showing signs of wear or abrasion were replaced with new components, including ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting, trouble-free operation without the need for future additional investment in the machine. Product advantages: Year of manufacture: 2019 The unit comes with new accessories, including a spray gun from the German brand R+M, stainless steel lance, steel-braided hose, and a 25° power nozzle. Robust brass pump head with new ceramic pistons and seals guarantees prolonged trouble-free operation. The powerful and efficient 3-phase motor provides excellent performance. Thanks to its operating parameters of 200 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in the construction industry, logistics, and agriculture. Kjdpfjwtm I Isx Abbswt Every unit we offer features custom-taken photographs – you buy exactly the machine you see. Technical specifications: Model: HDS 10/20-4M Supply voltage: 400V ~ 3 phase Pump output (l/h): 500 - 1000 Operating pressure (bar): 30 - 200 Max. water heating temperature (°C): 80-155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 Equipment: NEW spray gun from German brand R+M NEW 900mm stainless steel spray lance NEW reinforced hose with steel braiding, 10m NEW 25° power nozzle Water filter and GEKA coupling are included for free in the package.