Holzkraft Sc 2 Classic nakup rabljenega (166)

Stanje: novo, Leto izdelave: 2026, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces High-precision sliding table made of anodized aluminum, various lengths available Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops Max. saw blade diameter 315 mm, tiltable from 90° to -45° Large spindle moulder swivel range from 90° to -45° to the rear Four spindle speeds up to 10,000 rpm, manually adjustable With spindle moulder reverse operation Gsdpfxsih Dxle Ahbjkd Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness Two-speed feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch and motor protection switch Fixed handwheels Dimensions and weights Weight (net) approx. 857 kg Surface planer Surface table width: 410 mm Surface table length: 2000 mm Max. planing depth, surface: 5 mm Extraction connection Extraction port diameter: 3 x 120 mm Saw blade guard extraction port diameter: 60 mm Installation information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement explanation: Dimensions consider maximum travel or working length. Working area length: 1600 mm Working area width/depth: 1600 mm Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine. Thickness planer Thickness table length: 757 mm Thickness table width: 423 mm Working thickness min.: 3 mm Working thickness max.: 230 mm Max. planing depth, thickness: 5 mm Electrical data Connection voltage: 400 V Line frequency: 50 Hz Rated operation mode drive motor: S6 Duty cycle drive motor: 40% Power output drive motor: 3 x 5.0 kW Sliding table and worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 1250 mm Worktable width: 430 mm Worktable height: 900 mm Spindle moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. milling tool diameter: Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tool diameter, tenoning: 275 mm Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Panel saw unit Rip length: 2600 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explanation: with scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6–12 m/min Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Gkedpfx Ahscnw T Ijbjd Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, - NEW - Make: Holzkraft Model: HBS 633 S SET Gkedjvwf Tlepfx Ahbjd Description: - Heavy-duty profile construction with high dead weight for maximum running smoothness - Smooth and precise operation thanks to a torsion-resistant machine housing - Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface - Large cast iron parallel fence - Fast and precise adjustment of cutting height via handwheel and rack with millimeter scale - Supplied as standard with mitre gauge - Precision 3-roller bandsaw blade guides, with top and bottom guide rollers, featuring fine adjustment - Eccentric quick-release lever. The basic tension setting remains unchanged, with integrated bandsaw blade tension indicator - The saw table is mounted on a double trunnion base, allowing easy and fast locking of the set tilt angle via quick-clamp - The basic tension setting remains unchanged - Integrated bandsaw blade tension indicator - The massive cast iron saw table is easily and conveniently adjusted via a handwheel and rack guide - Infinitely variable tilt adjustment from 0° to 45° - Simple and quick locking of the selected tilt angle via quick-clamp Technical Data: Working table dimensions: 830 x 600 mm Cutting speed: 1615 m/min Flywheel diameter: 630 mm Max. cutting height: 400 mm Max. cutting width with fence: 570 mm Max. cutting width without fence: 610 mm Bandsaw blade length: 4600 mm Precision guides: top / bottom Saw table tilt: 0° to +45° Motor power: 400 V/50 Hz/P2 3.75 kW Weight: 380 kg Dimensions: 1190 x 750 x 2060 mm Extraction port diameter: 2 x 100 mm Art. No.: 5156303SET Location: 97447 Gerolzhofen - Ex works, loaded free -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination machine 4-in-1 HOLZKRAFT CU 410c F 26 N Tersa -- Technical Specifications -- - Circular Saw - Edging length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 100 / 79 mm Max. crosscut width to the left of the saw blade: 2,310 mm Rip capacity at parallel fence: 900 mm Saw blade tilt: 90° - 45° - Planer - Gksdpfx Aod Dtc Tshbod Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of planer knives: 72 mm / 3 pcs - Thicknesser - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special Price - Location: Ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Gksdpfx Aecnxa Nohbjd Rip capacity at fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Gkodpfxoff Hdmj Ahbjd Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Gkjdoff Hdpopfx Ahbed Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Gkedpfed Hx Hpjx Ahbjd Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motor-driven height adjustment of the working units with digital display Units can be operated individually Highly durable rubberized conveyor belt Infinitely variable feed speed Constant infeed height Models STR L with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for delicate materials. Unit for saw-cut finish optionally available Gsdpfx Ahoff Hdijbjkd Dimensions and Weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction port diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Rotation: 1500 rpm Electrical Data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Total connected load: 6.25 kW Supply voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Noise Emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Gedpfocnw U Dex Ahbskd Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Rabljen stroj Letnik proizvodnje: 2023 Stanje: kot nov, stroj ni bil uporabljen Oprema in tehnični podatki: - Število vrtljajev vretena: 3.500 / 6.000 / 8.000 / 10.000 vrt/min - Nagib vretena: 0 do -45° Gedjzk Nn Ajpfx Ahbjkd - Uporabna dolžina vretena: 125 mm - Premer vretena: 30 mm - Kazalnik vrtljajev: LED-prikaz na sprednji strani stroja - Največji premer orodja (standard): 240 mm - Največji premer orodja, ki ga je mogoče spustiti: 230 mm - Največji premer orodja za profilno frezanja: 240 mm - Največji premer orodja za čelnično frezanja: 320 mm - Dolžina delovne mize: 1.200 mm - Širina delovne mize: 530 mm - Višina mize: 900 mm - Dolžina drsnega nosilca: 1.200 mm - Širina drsnega nosilca: 360 mm - Višina drsnega nosilca: 142 mm - Premer odvodne cevi: 2 × 120 mm - Moč pogonskega motorja: 5,0 kW - Napetost: 400 V - Frekvenca omrežja: 50 Hz Mere: 1.200 × 2.000 mm Teža: 510 kg Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 203 With standard chassis Dimensions and Weights Chip collection volume: 175 l Inlet extraction port (external diameter): 200 mm Length approx.: 1061 mm Width/depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Gkodpfx Ahohk S Szobjd Filter Filter surface area: 2.2 m² Noise Emission Max. sound pressure level: 84 dB(A) Volume Flow Rate Rated air flow: 2500 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easy maneuverability thanks to swivel castors Low power consumption Extraction system complies with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Stanje: rabljeno, Leto izdelave: 2023, Nova razstavna naprava! CENA: 11.950 € neto • Opremljena z rezilno glavo TERSA za izjemno hitro menjavo nožev • Sistem rezilne glave TERSA omogoča izjemno tih delovanje • Poševno nazobčena jeklena valja za enakomeren in stalen vnos materiala • Vnos materiala z dvema hitrostmi, uravnan s posebnim motorjem • Izjemno dolge ravnalne mize omogočajo enostavno in natančno nastavitev obdelovancev • Delovne mize so izdelane iz sivega litega jekla, žarjene in brez napetosti, zato so odporne in ostanejo ravne • Ravnalne mize, ki se odpirajo hkrati v smeri nazaj, za kratke čase priprave • Nastavitev debeline rezanja na ravnalni mizi s pomočjo ročnega kolesa z numeričnim prikazom za nastavitev višine rezanja • Viska teža stroja zagotavlja največjo natančnost in stabilno delovanje • Močan industrijski motor • Robustna jeklena/litena konstrukcija • Odstranjevanje materiala že pri 0,2 mm (pri minimalni debelini obdelovanca 3 mm), zahvaljujoč poševno nazobčeni valjarni (idealno za varčno rezanje trdega lesa) • Kakovost – izdelano v Evropi Podrobnosti opreme: Rezilna glava Tersa • Nič več nastavljanja in vijačenja • Menjava nožev v nekaj sekundah • Samozaporno • Izjemno tiho delovanje Vnos materiala • Poševno nazobčene jeklene valjarne za stalen in enakomeren vnos lesa brez sledi • Več zob se hkrati sproži za močan vnos • Brez obrabe v primerjavi z gumijastimi valjarnami Fiksna odsesalna kapuca • Zahvaljujoč fiksni odsesalni kapuci pri menjavi ni treba premikati odsesalne cevi • To prihrani dragocen čas Hkrati odpiranje ravnalnih miz • Hkrati dvigovanje ravnalnih miz s pomočjo vzmetne podpore za hitro in priročno preklopitev v način rezanja • Nastavitev debeline na mizi za rezanje • FS 41 elite s s sistemom za nastavitev debeline na mizi za rezanje, upravljan z ročnim kolesom z integriranim prikazovalnikom • Miza za rezanje je podprta na štirih velikih vretenih, ki zagotavljajo največjo stabilnost v vseh delovnih pogojih • Zahvaljujoč posebni dvižni napravi, položaj mize ostane nespremenjen tudi brez zapore • Varnostne zaščite proti povratnemu udarcu • Masivne varnostne zaščite proti povratnemu udarcu preprečujejo povratni udarec obdelovancev • 4-rezilna glava zagotavlja optimalen profil rezanja Eloksirana ravnalna prijemalna plošča iz aluminija • Velikih dimenzij (1200 x 150 mm) • Enostavno premikanje • Naklon od 90° do 45° s pomočjo skale • Serijsko opremljena s pomožno prijemalno ploščo za varno rezanje tudi ozkih obdelovancev Tehnični opis - Ravnalna miza Skupna dolžina miz 2200 mm - Ravnalna miza Delovna širina 410 mm - Ravnalna miza Odstranjevanje materiala maks. 5 mm - Ravnalna miza Dimenzije ravnalne prijemalne plošče 1200 x 150 mm - Rezanje Dimenzije mize za rezanje 775 x 410 mm - Rezanje Minimalna delovna višina 3 mm - Rezanje Maksimalna delovna višina 240 mm - Rezanje Hitrosti podajanja 6 / 12 m/min - Hitrost vrtenja rezilne glave 5000 1/min - Premer rezilne glave 95 mm - Število nožev 4 kos. - Električni priključek 400V / 50Hz - Moč motorja 5,0 kW - Dimenzije (D x Š) 2250 x 1440 mm - Premer odsesalne odprtine 1 x 120 mm - Teža 450 kg Lokacija: Rieth Godpfxez Ebprs Ahbokd

Stanje: novo, Leto izdelave: 2026, Robust construction allows machining of longer workpieces. Grinding unit is tiltable, making the machine also usable as an edge sanding machine. 225 mm large, precision-balanced belt drive rollers ensure low-vibration operation. Easy belt alignment adjustment. High belt speed of 17 m/s. Right/left belt run. Top sanding shoe with graphite coating. Sanding shoe with 4-way spring suspension. Godpfx Aheff Hdfobekd Equipped with a movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy loads from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table with flip-up function for specialized edge sanding. Drawer sanding device. Integrated work table lighting. Features and Equipment 225 mm large, precision-balanced belt drive rollers ensure optimal, low-vibration power transmission. Belt speed: 17 m/s. Professional tiltable sanding shoe for bevelled surfaces (4-way spring suspension). Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with integrated drawer sanding device. Split table with flip-up functionality for specialized edge sanding applications. Dimensions and Weights Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Work Table(s) Table height adjustment: 550 mm Table transverse travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Abrasive belt length: 7000 mm Abrasive belt width: 150 mm Belt speed(s): 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Stanje: rabljeno, Leto izdelave: 2023, Rabljen stroj Letnik izdelave: 2023 Gkodpfxjzk Ni Te Ahbed Stanje: skoraj novo, izvedeno le nekaj vrtanj Oprema in tehnični podatki: - Hitrost vretena: 3.000 vrt/min - Širina vrtanja: 240 mm - Največja globina vrtanja pri 90°: 180 mm - Nastavitev višine vrtalne glave: 160 mm - Območje vpenjanja orodja: 0–20 mm - Vrtenje delovne mize: ±60° - Dolžina delovne mize: 565 mm - Širina delovne mize: 315 mm - Premer priključka za sesalnik: 90 mm - Oddajna moč: 2,2 kW - Napetost: 400 V - Frekvenca omrežja: 50 Hz Mere: 1.290 × 980 × 1.270 mm Teža: 260 kg Razpoložljivost: kratkoročno Lokacija skladišča: Röllbach

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Workbenches in professional design Precise and meticulous craftsmanship Entirely made from steamed, solid beechwood All important edges are rounded Surfaces are eco-friendly oil-finished Supplied as standard with tool drawer The two cylindrical rods of the vises are precisely and stably guided within a cast component Equipped with a smooth-operating trapezoidal thread spindle With French-style front vise and German-style tail vise with linear guide, two short round bench dogs, two long round bench dogs, drawer and tool tray Finger-jointed tail vise and tool tray back Length of work surface without vises: 1915 mm Width/depth of work surface without vises: 615 mm Working height: 870 mm Front vise length: 520 mm Tail vise length: 450 mm Front vise width: 70 mm Tail vise width: 140 mm Front vise clamping range: 190 mm Tail vise clamping range: 180 mm Front vise clamping range to center of round dog: 225 mm Gsdpfx Ahsc Uydaebjkd Tail vise clamping range to center of round dog: 265 mm Top thickness: 50 mm Product length: 2120 mm Product width/depth: 790 mm Product height: 870 mm Weight (net): 91 kg Location: Available from stock, 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable rubberized conveyor belt Infinitely variable feed rate Constant infeed height STR L models with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for sensitive materials. Unit for saw-cut effect available as an option Motorized height adjustment of the units Units can be switched on individually Infinitely adjustable feed rate Dimensions and Weights Length approx. 1300 mm Width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Connection for dust extraction Extraction connection diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Speed 1500 min⁻¹ Electrical Data Drive motor power 2 x 3.0 kW Feed motor power 0.22 kW Total power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise Emission Sound power level Lw (idle without extraction) 65 dB(A) Sanding Unit Max. sanding width 300 mm Feed Unit Feed speed 1 – 13 m/min Gksdpfxoff Hdge Ahbsd Workpiece Max. height 300 mm Max. weight 100 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5 h, moč: 5 kW (6,80 KM), vhodna napetost: 400 V, vrtilni razpon: 45 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.500 obr/min, širina mize: 530 mm, dolžina mize: 1.200 mm, skupna masa: 510 kg, premer orodja: 240 mm, Oprema: CE označba, Professionelle macchina per artigiani con mandrino fresa orientabile e braccio esteso. Macchina da esposizione come nuova – utilizzata solo per dimostrazioni Unità di fresatura in ghisa, inclinabile all'indietro fino a -45° Quattro velocità di fresatura da 3500 a 10000 giri/min Rotazione destra/sinistra Indicatore di altezza e inclinazione con precisione di 1/10 mm Cambio rapido della velocità tramite serraggio eccentrico Potente motore industriale da 5,0 kW Cuffia di protezione per fresatura curva inclusa nella fornitura Prodotto in Italia Inclinazione mandrino fresa 0 – -45° Gjdpfx Aheyn Ny Usbskd Lunghezza utile del mandrino 125 mm Velocità mandrino 3500/6000/8000/10000 giri/min (display LED sulla parte frontale della macchina) Diametro mandrino 30 mm Diametro utensile max. 240 mm Diametro utensile massimo abbassabile 230 mm Diametro utensile massimo per tenonatura 320 mm Accessori inclusi: Guida per tagli obliqui con due battute ribaltabili Serraggio eccentrico Cuffia di protezione per fresatura curva Inoltre: ganasce del sistema di battuta regolabili La macchina può essere visionata e testata in qualsiasi momento presso la sede di Chemnitz.

Stanje: dober (rabljeno), Leto izdelave: 2016, Premer valja: 470 mm Gsdpfx Ajz Hd Slshbokd Višina reza: 265 mm Širina reza: 390/465 mm Moč motorja: 1,6 kW Velikost mize: 535/485 mm Naklon mize: 45 stopinj Dimenzije (dolžina/širina/višina): 800/490/2000 mm Masa stroja: približno 157 kg

Stanje: novo, Description Surface and Thickness Planer with TERSA Quick-Change Cutter System - Equipped with TERSA cutter block for lightning-fast knife changes - TERSA cutter system ensures particularly quiet operation - Helically toothed steel infeed roller for consistent and even feed of timber - Exceptionally long, one-piece surfacing tables for easy planing of workpieces - Large planing fence remains in position when opening the surfacing tables - Surfacing tables open towards the rear - High machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Special Features - Work tables made of stress-relieved cast iron, guaranteeing lasting flatness and high resistance to distortion - Table lips ensure silent operation Equipment Details TERSA Cutter Block - No more adjustments or screwing required - Knife replacement in seconds - Self-locking - Exceptionally quiet - Perfect planing result Extraction Hose Connection - Both surfacing and thicknessing extraction ports face the same direction - Hose connects from one side only; no need for a hose to run around the machine Drive System - Rugged chain drive - Drive wheels made of steel - Heavy-duty cast iron bearing mounts Planing Mechanism - Heavy anti-kickback fingers prevent workpiece kickback - 3-knife TERSA cutter block ensures optimal planing finish Material Feed - Helically serrated steel feed rollers guarantee a consistent, even material feed with no impressions - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Technical Data Surfacing table overall length: 1510 mm Surfacing working width: 300 mm Surfacing depth of cut, max: 4 mm Thicknessing table dimensions: 565 x 300 mm Thicknessing working height, min: 3 mm Thicknessing working height, max: 230 mm Thicknesser feed speed: 7 m/min Cutter block speed: 5200 rpm Cutter block diameter: 72 mm Number of knives: 3 pcs. Electrical connection: 400 V Motor power: 4.0 kW Extraction port diameter: 2 x 120 mm Weight: 270 kg Gkodou Diwlspfx Ahbed Long-hole mortising unit (optional): Table size 470 x 220 mm Long-hole mortising unit travel, cross/longitudinal: 160 mm / 110 mm Long-hole mortising unit vertical travel: 120 mm Scope of Delivery & Equipment - TERSA cutter block - Anodized aluminium planing fence

Stanje: rabljeno, Leto izdelave: 2018, Nosilnost 350 kg, minimalna višina mize 757 mm, maksimalna višina mize 1157 mm, dolžina mize 3000 mm, širina mize 1000 mm. Dolžina ca. 3010 mm, širina/globina ca. 1040 mm, višina ca. 1157 mm. Priporočena zmogljivost odsesavanja 2200 m³/h, število priključnih nastavkov 3 x 220 V, premer priključnih nastavkov 140 mm. Teža: 130 kg. Skladišče: Nattheim. Gedpfx Aoxnlavehbjkd

Leto izdelave: 2022, stanje: rabljeno, Rabljen stroj Letnik izdelave: 2022 Oprema in tehnični podatki: Gksdpozk Nqdsfx Ahbsd - Omogoča eni osebi enostavno nalaganje plošč na okvir platforme in njihovo obračanje iz navpične v vodoravno lego. - Uporaba na strojih za rezanje plošč ali velikih formatov, na regalih ali na poti med delovnimi postajami. - Obračalni okvir z dvema blokadama v navpični in vodoravni legi. - Prilagoditev višine mize na želeno delovno višino s pomočjo nožne hidravlike. - Konstrukcijski princip z enostavno gibljivo škarjasto mehanizmo zagotavlja, da je platforma dvigana in spuščana v popolnoma vzporedni legi. - Stabilni podporni valji na spodnjem nosilcu in več večsmernih valjev zagotavljajo ergonomsko enostavno gibanje. - Protiteža na spodnjem okvirju za varno stabilnost in največjo stabilnost pri premikanju mize. - Nogi pedala za upravljanje delovne mize je v celoti dostopen. - Enostavno manevriranje zaradi štirih vrtljivih koles s premerom 125 mm. - Dve kolesi opremljeni z zavorami. - Enostavna montaža in demontaža okvirja za obračanje plošč na osnovnem okvirju platforme z nekaj preprostimi koraki. - Izpolnjuje varnostne kriterije standarda EN 1570-1. - Nosilnost 300 kg - Višina mize maks. 1010 mm - Višina mize min. 400 mm - Širina obračalnega okvirja 1800 mm, dolžina 1500 mm - Premer koles 125 mm Mere: 1200 x 740 x 400 mm Teža: približno 80 kg Teža obračalnega okvirja: 10 kg Razpoložljivost: v kratkem času Lokacija skladišča: 63934 Röllbach

Stanje: novo, Planer and Thicknesser HOLZKRAFT fs 52es digital TERSA - Demonstration Machine - TERSA Cutter Block, electric height adjustment, Godpfou R Sztjx Ahbskd digital readout for thickness setting ----- Technical Specifications ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, Table length: 2,250 mm, Max. chip removal: 5 mm, Cutter block diameter: 120 mm, Number of knives: 4 pcs, Passage height: 240 mm, Min. workpiece thickness: 3 mm, Feed speed: 5 / 8 / 12 / 18 m/min, Spindle speed: 5,000 rpm, Extraction port diameter: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, Weight: 695 kg - new demonstration machine -

Stanje: novo, Leto izdelave: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edging: 0.4 - 3 mm Solid wood edging: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: granulate / quick-change glue pot kit End trimming unit: yes Flush end trimming unit: yes Corner copying unit: yes Flush radius milling unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3774 mm Gsdpfsl D Rx Uex Ahbjkd Machine width: 1546 mm Machine height: 1337 mm Weight: 842 kg

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Gkedpfehk S Sdox Ahbjd Filter Filter surface: 2 x 1.92 m² Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -