Holzkraft Fs 41 Elite Tersa nakup rabljenega (165)

Stanje: novo, Lesni cepilec Holzkraft, tip HSE 5-520 KH, za udobno in varno cepljenje krajših kosov lesa, primeren za zasebno ali polprofesionalno uporabo. Zaradi kompaktne zasnove in enostavnega upravljanja omogoča učinkovito delo tudi na majhnem prostoru. Idealno za pripravo kurilnega lesa. Tehnični podatki: Dwsdpfx Agozrx E Hogod - Cepljena sila: 5 ton - Dolžina cepljenega lesa: maks. 520 mm - Premer cepljenega lesa: maks. 250 mm - Pogon: Električni 230 V - Teža: pribl. 50 kg

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Dwodpfxjhk S Sts Aggod Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of Delivery: Two filter bags, two chip bags Location: Available from stock 54634 Bitburg - Available at short notice -

Stanje: novo, Leto izdelave: 2026, Quick-release belt tensioning via lever Upper belt support with graphite coating 250 mm large, balanced belt drive rollers ensure optimal power transmission. With electric height adjustment With dust extraction and noise protection devices With noise protection certificate With two speeds Tilting sanding shoe adapts to surfaces Beveled surfaces Standard with right and left run The quick-release belt tensioning enables fast and easy sanding belt changes. Delivery is partially assembled Dimensions and Weight Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Worktable(s) Worktable height adjustment: 620 mm Maximum working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-ph Current type: AC Djdpfx Aeff Hdbeggjwd Mains frequency: 50 Hz Sanding Unit Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height workpiece longer than worktable: 180 mm Explanation regarding max. height of workpiece longer than worktable: Processing of the workpiece with an overhang to the right beyond the worktable is possible.

Stanje: novo, Leto izdelave: 2026, Small panel saw with tilting saw blade and high-quality anodised aluminium sliding table Cutting level of the small panel saw is directly at the rolling table Precision-guided format sliding table made from aluminium, anodised as standard Large support table on telescopic arm, longitudinally adjustable Standard table extension and table widening enable easy handling of larger workpieces The large saw unit, made from cast iron, is double-mounted to the cast table, ensuring stability, precision, smooth running, and a long service life Large working table made of ground cast iron, extremely robust and insensitive to wear Smooth operation and precise cuts Aluminium sliding table Proven ball-contact system, in use millions of times Dust and dirt resistant due to minimal contact area between ball and trapezoidal rail 10-year HOLZKRAFT warranty against wear on the hardened guideways Telescopic fence Extendable aluminium telescopic fence Adjustable angle With two professional folding stops Parallel fence Standard with fine adjustment and quick clamping system Scope of delivery: - Table extension - Table widening - Anodised aluminium format sliding table - Parallel fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Dsdpfxecnxamj Aggewd Technical data Table dimensions 1020 x 325 mm Table height 900 mm Crosscut length 1660 mm Max. cutting height 90° with scorer 100 mm Max. cutting height 45° with scorer 79 mm Max. rip width left of saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Max. saw blade diameter with scorer 315 mm Max. saw blade diameter without scorer 315 mm Scoring saw blade diameter (option) 80 mm Main saw blade speed 4000 rpm Scoring saw blade speed 7600 rpm Electrical connection 400 V / 50 Hz Motor power 4.0 kW Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Weight 295 kg Location: Available immediately ex stock 54634 Bitburg - immediately available -

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Workbenches in professional design Dwedpfx Agjc Uydaeged Precise and meticulous craftsmanship Entirely made from steamed, solid beechwood All important edges are rounded Surfaces are eco-friendly oil-finished Supplied as standard with tool drawer The two cylindrical rods of the vises are precisely and stably guided within a cast component Equipped with a smooth-operating trapezoidal thread spindle With French-style front vise and German-style tail vise with linear guide, two short round bench dogs, two long round bench dogs, drawer and tool tray Finger-jointed tail vise and tool tray back Length of work surface without vises: 1915 mm Width/depth of work surface without vises: 615 mm Working height: 870 mm Front vise length: 520 mm Tail vise length: 450 mm Front vise width: 70 mm Tail vise width: 140 mm Front vise clamping range: 190 mm Tail vise clamping range: 180 mm Front vise clamping range to center of round dog: 225 mm Tail vise clamping range to center of round dog: 265 mm Top thickness: 50 mm Product length: 2120 mm Product width/depth: 790 mm Product height: 870 mm Weight (net): 91 kg Location: Available from stock, 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, Holzkraft Bandsaw HBS 533 S. Heavy-duty professional model with high dead weight for maximum smooth running Exceptionally smooth and precise operation thanks to a torsion-free machine housing Large, one-piece cast iron saw table, tiltable from 0° to +20°, with ground and polished surface Patented table tilting device with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic saw blade guides Large cast iron parallel fence Fast and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch with automatic shut-off when door is opened Large cast iron parallel fence Supplied as standard with mitre gauge Flywheels made of cast iron with special coating on the running surfaces Dwjdpfx Aob S Uzkoggsd Inspection window for checking saw blade run Professional saw table guidance The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack-and-pinion guidance The tilt angle is continuously adjustable from 0° to +20° Patented Work table dimensions 750 x 530 mm Cutting speed 1400 m/min. Flywheel Ø 530 mm Max. cutting height 350 mm Max. cutting width with fence 465 mm Max. cutting width without fence 510 mm Bandsaw blade length 4190 mm Precision guides top / bottom Table tilt 0° - +45° Motor power 400 V/50 Hz/P2 4.0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Extraction port diameter 2 x 100 mm Location: Ex stock Bitburg

Stanje: novo, Leto izdelave: 2026, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Dodpfx Aeff Ed Tsggswd Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short notice

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit Dsdpshk S Sdefx Aggewd ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 1.92 m² Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Device ASA 4303 Mobile unit with 180° rotatable extraction assembly Dedpfxshk S Sle Aggowd Designed for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit enables chip removal from below or above Robust metal impeller Standard equipped with a high-quality chassis for increased stability and easy maneuverability Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l Extraction inlet diameter (outer): 260 mm Extraction outlet diameter (outer): 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Motor power: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Rated airflow: 4300 m³/h Max. vacuum: 2000 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing and saw chips (not suitable for dust) 180° rotatable extraction unit allows for suction from below or above Robust fan impeller made of metal Supplied with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 110 l Outer diameter extraction nozzle inlet: 203 mm Outer diameter extraction nozzle outlet: 1 x 100, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 min¯¹ Power consumption: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Dsdpfxohk S Shj Aggewd Airflow Nominal airflow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 203 With standard chassis Dimensions and Weights Chip collection volume: 175 l Inlet extraction port (external diameter): 200 mm Length approx.: 1061 mm Width/depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Max. sound pressure level: 84 dB(A) Volume Flow Rate Rated air flow: 2500 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easy maneuverability thanks to swivel castors Low power consumption Extraction system complies with dust class L Dwsdpfxohk S Szj Aggsd Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 163 with standard chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter (outside) of extraction inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Maximum sound pressure level: 83 dB(A) Airflow Nominal air flow rate: 2200 m³/h Suitable for milling, planing, and sawdust (not for fine dust) Significantly reduced dust content due to BIA-certified filter material with high separation efficiency Housing parts and impellers made from high-strength special plastic Quick-release fasteners for filters and chip bags for easy maintenance Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction units comply with Dust Class L Scope of delivery: Djdpfx Ashk S S Eeggjwd Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Stanje: novo, Premična odsesovalna naprava Dwsdpfx Aew I Uu Rsggod Razstavni eksponat Dimenzije in teže Dolžina (izdelek) pribl. 1000 mm Širina/globina (izdelek) pribl. 500 mm Višina (izdelek) pribl. 2100 mm Teža (neto) pribl. 39 kg Prostornina zbiralnika ostružkov 110 l Nazivni zunanji premer odsesovalnega nastavka – vhod 203 mm Nazivni zunanji premer odsesovalnega nastavka – izhod 1 x 100, 1 x 120 mm Električni podatki Št. vrtljajev v prostem teku 2950 min¯¹ Priključna napetost 230 V Omrežna frekvenca 50 Hz Priključna moč 1,5 kW Izhodna moč 1,05 kW Filter Filtrirna površina 1,92 m² Emisija hrupa Najvišja raven zvočnega tlaka 85,7 dB(A) Volumski pretok zraka Nazivni volumski pretok 1900 m³/h Največji podtlak 1700 Pa Obseg dobave: fini filtrirni vreča, vreča za ostružke Razpoložljivost: takoj Lokacija skladišča: Hochheim

Stanje: novo, Leto izdelave: 2026, Enclosed and secure sawing area for increased safety thanks to a legally required saw blade guard Anti-rotation protection for the timber via stamped barbs in the rocking table Robust, torsion-resistant steel frame Transport device for easy mobility Impact, scratch, and weather resistant due to high-quality powder coating Phase inverter Dimensions and Weights Working height: 700 mm Rocking table support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Dodpfx Agehkz Hisgewd Weight approx.: 92.5 kg Drive Type: Electric motor with direct drive Electrical Data Rated power: 5 kW Supply voltage: 400 V Mains frequency: 50 Hz Saw Blade Diameter: 700 mm Cutting Capacity Round wood in rocking table: 250 mm Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2026, Feed unit with consistent feed speed without power loss Metal gearbox with hardened gears Metal cover for the feed rollers Forward and reverse operation High-performance motor Durable polyurethane feed rollers Dodpfx Agjcnxmzsgjwd Stand included as standard with extended outreach arm Individually swiveling and adjustable for horizontal and vertical use With counter Model: VSA 48 L Article No.: 5115500 Technical Data: Maximum outreach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Roller travel: 25 mm Number of speed settings: 8 Feed speeds: 2/ 4/ 5.5/ 6.7/ 11/ 13/ 16.5/ 33 m/min Motor output: 0.75 kW Connection: 400 V / 50 Hz Weight: 65 kg