Holzkraft Fs 41 Elite Tersa nakup rabljenega (217)

Stanje: novo, Leto izdelave: 2025, Chip Extraction Device ASA 4303 Mobile unit with 180° rotatable extraction assembly Designed for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit enables chip removal from below or above Robust metal impeller Standard equipped with a high-quality chassis for increased stability and easy maneuverability Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l Extraction inlet diameter (outer): 260 mm Extraction outlet diameter (outer): 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Motor power: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Rated airflow: 4300 m³/h Max. vacuum: 2000 Pa Gujdpfx Abjhk S Slj Tsk Scope of Delivery: Two filter bags, two chip collection bags Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 203 With standard chassis Dimensions and Weights Chip collection volume: 175 l Inlet extraction port (external diameter): 200 mm Length approx.: 1061 mm Width/depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Guedpfehk S Szsx Ab Tjk Noise Emission Max. sound pressure level: 84 dB(A) Volume Flow Rate Rated air flow: 2500 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easy maneuverability thanks to swivel castors Low power consumption Extraction system complies with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Stanje: novo, Leto izdelave: 2025, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Gujdpfxehp Rdle Ab Tsk Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Robust construction allows machining of longer workpieces. Grinding unit is tiltable, making the machine also usable as an edge sanding machine. 225 mm large, precision-balanced belt drive rollers ensure low-vibration operation. Easy belt alignment adjustment. High belt speed of 17 m/s. Right/left belt run. Top sanding shoe with graphite coating. Sanding shoe with 4-way spring suspension. Equipped with a movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy loads from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table with flip-up function for specialized edge sanding. Drawer sanding device. Integrated work table lighting. Features and Equipment 225 mm large, precision-balanced belt drive rollers ensure optimal, low-vibration power transmission. Belt speed: 17 m/s. Professional tiltable sanding shoe for bevelled surfaces (4-way spring suspension). Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with integrated drawer sanding device. Split table with flip-up functionality for specialized edge sanding applications. Dimensions and Weights Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Guodpfx Asff Hdfeb Tjk Work Table(s) Table height adjustment: 550 mm Table transverse travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Abrasive belt length: 7000 mm Abrasive belt width: 150 mm Belt speed(s): 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable rubberized conveyor belt Infinitely variable feed rate Constant infeed height STR L models with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for sensitive materials. Unit for saw-cut effect available as an option Motorized height adjustment of the units Units can be switched on individually Infinitely adjustable feed rate Dimensions and Weights Length approx. 1300 mm Width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Connection for dust extraction Extraction connection diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Speed 1500 min⁻¹ Electrical Data Drive motor power 2 x 3.0 kW Feed motor power 0.22 kW Total power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise Emission Sound power level Lw (idle without extraction) 65 dB(A) Gusdjff Hdgjpfx Ab Tok Sanding Unit Max. sanding width 300 mm Feed Unit Feed speed 1 – 13 m/min Workpiece Max. height 300 mm Max. weight 100 kg

Stanje: novo, Leto izdelave: 2025, Small panel saw with tilting saw blade and high-quality anodised aluminium sliding table Cutting level of the small panel saw is directly at the rolling table Precision-guided format sliding table made from aluminium, anodised as standard Large support table on telescopic arm, longitudinally adjustable Standard table extension and table widening enable easy handling of larger workpieces The large saw unit, made from cast iron, is double-mounted to the cast table, ensuring stability, precision, smooth running, and a long service life Large working table made of ground cast iron, extremely robust and insensitive to wear Smooth operation and precise cuts Aluminium sliding table Proven ball-contact system, in use millions of times Dust and dirt resistant due to minimal contact area between ball and trapezoidal rail 10-year HOLZKRAFT warranty against wear on the hardened guideways Telescopic fence Extendable aluminium telescopic fence Adjustable angle With two professional folding stops Parallel fence Standard with fine adjustment and quick clamping system Gusdpfx Abecnxams Tek Scope of delivery: - Table extension - Table widening - Anodised aluminium format sliding table - Parallel fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Crosscut length 1660 mm Max. cutting height 90° with scorer 100 mm Max. cutting height 45° with scorer 79 mm Max. rip width left of saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Max. saw blade diameter with scorer 315 mm Max. saw blade diameter without scorer 315 mm Scoring saw blade diameter (option) 80 mm Main saw blade speed 4000 rpm Scoring saw blade speed 7600 rpm Electrical connection 400 V / 50 Hz Motor power 4.0 kW Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Weight 295 kg Location: Available immediately ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Holzkraft Bandsaw HBS 533 S. Heavy-duty professional model with high dead weight for maximum smooth running Exceptionally smooth and precise operation thanks to a torsion-free machine housing Large, one-piece cast iron saw table, tiltable from 0° to +20°, with ground and polished surface Patented table tilting device with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic saw blade guides Large cast iron parallel fence Fast and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch with automatic shut-off when door is opened Large cast iron parallel fence Supplied as standard with mitre gauge Flywheels made of cast iron with special coating on the running surfaces Inspection window for checking saw blade run Gjdpfx Aob S Uzkob Touk Professional saw table guidance The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack-and-pinion guidance The tilt angle is continuously adjustable from 0° to +20° Patented Work table dimensions 750 x 530 mm Cutting speed 1400 m/min. Flywheel Ø 530 mm Max. cutting height 350 mm Max. cutting width with fence 465 mm Max. cutting width without fence 510 mm Bandsaw blade length 4190 mm Precision guides top / bottom Table tilt 0° - +45° Motor power 400 V/50 Hz/P2 4.0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Extraction port diameter 2 x 100 mm Location: Ex stock Bitburg

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Workbenches in professional design Precise and meticulous craftsmanship Entirely made from steamed, solid beechwood Gjdpfx Asc Uydaob Touk All important edges are rounded Surfaces are eco-friendly oil-finished Supplied as standard with tool drawer The two cylindrical rods of the vises are precisely and stably guided within a cast component Equipped with a smooth-operating trapezoidal thread spindle With French-style front vise and German-style tail vise with linear guide, two short round bench dogs, two long round bench dogs, drawer and tool tray Finger-jointed tail vise and tool tray back Length of work surface without vises: 1915 mm Width/depth of work surface without vises: 615 mm Working height: 870 mm Front vise length: 520 mm Tail vise length: 450 mm Front vise width: 70 mm Tail vise width: 140 mm Front vise clamping range: 190 mm Tail vise clamping range: 180 mm Front vise clamping range to center of round dog: 225 mm Tail vise clamping range to center of round dog: 265 mm Top thickness: 50 mm Product length: 2120 mm Product width/depth: 790 mm Product height: 870 mm Weight (net): 91 kg Location: Available from stock, 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Gujdpoff Ed Tsfx Ab Tok Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short notice

Stanje: novo, Leto izdelave: 2025, Holzkraft HBS Precision Bandsaws for Craftsmen – Top Quality, Workmanship and Price-Performance Ratio Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing Large cast iron saw table made from a single piece, with a precisely ground and polished surface Quick-release blade tensioning via eccentric lever on the rear of the machine Standard with two cutting speeds Precise 3-roller blade guides, fitted as standard above and below from model HBS 351 upwards Rapid cutting height adjustment via rotary knob and rack-and-pinion with millimeter scale Smooth-running aluminium rip fence with eccentric quick-clamping and magnifier Standard mitre fence, adjustable by 60° to either side Aluminium rip fence with eccentric quick-clamping Technical Data: Guodpovk Sd Dofx Ab Tok Worktable dimensions: 610 x 431 mm Cutting speed: 900 / 450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with fence: 370 mm / without fence: 410 mm Blade length: 3345 mm Precision 3-roller guide: above/below Table tilt: -10°, +45° Motor output: 1550 W / 400 V Weight: 130 kg Dimensions (mm): 680 x 512 x 2048 Extraction port diameter: 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 163 with standard chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter (outside) of extraction inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Gujdpfjhk S S Esx Ab Tek Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Maximum sound pressure level: 83 dB(A) Airflow Nominal air flow rate: 2200 m³/h Suitable for milling, planing, and sawdust (not for fine dust) Significantly reduced dust content due to BIA-certified filter material with high separation efficiency Housing parts and impellers made from high-strength special plastic Quick-release fasteners for filters and chip bags for easy maintenance Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction units comply with Dust Class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Gedpfx Abohp Rcro Teuk Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: novo, Leto izdelave: 2025, Quick-release belt tensioning via lever Upper belt support with graphite coating 250 mm large, balanced belt drive rollers ensure optimal power transmission. Godpfx Aboff Hdbo Teuk With electric height adjustment With dust extraction and noise protection devices With noise protection certificate With two speeds Tilting sanding shoe adapts to surfaces Beveled surfaces Standard with right and left run The quick-release belt tensioning enables fast and easy sanding belt changes. Delivery is partially assembled Dimensions and Weight Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Worktable(s) Worktable height adjustment: 620 mm Maximum working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-ph Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height workpiece longer than worktable: 180 mm Explanation regarding max. height of workpiece longer than worktable: Processing of the workpiece with an overhang to the right beyond the worktable is possible.

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motor-driven height adjustment of the working units with digital display Units can be operated individually Highly durable rubberized conveyor belt Infinitely variable feed speed Constant infeed height Models STR L with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for delicate materials. Unit for saw-cut finish optionally available Dimensions and Weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction port diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Rotation: 1500 rpm Electrical Data Guodpeff Hdisfx Ab Tjk Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Total connected load: 6.25 kW Supply voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Noise Emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Guodecnw T Ijpfx Ab Tjk Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional version with quick-release saw blade tensioning system for professional users Article number: 5150063 DESCRIPTION Heavy-duty professional model with high dead weight for maximum smoothness of operation Exceptionally smooth and precise running thanks to the torsion-resistant machine frame Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Patented table tilting mechanism with handwheel and rack Quick-release saw blade tensioning Precision saw blade guides Fast and precise cut height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shut-off when the door is opened Large cast-iron parallel fence Supplied as standard with mitre gauge Table tilt via rack and handwheel TECHNICAL DATA Dimensions and Weights Product length approx. 1190 mm Product width/depth approx. 820 mm Product height approx. 2063 mm Net weight approx. 377.7 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table(s) Work table length: 830 mm Work table width: 600 mm Work table height: 830 mm Table tilt: 0 – 45° Note on table tilt: For safety reasons, from 20° a holding device/stop must be used to prevent the wood from slipping! Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 4.1 kW Cutting Ranges Max. cutting height 90°: 400 mm Max. cutting width with fence: 570 mm Max. cutting width without fence: 610 mm Saw Blade Saw blade speed: 1615 m/min Flywheel diameter: 630 mm Saw blade length: 4600 mm Saw blade guide: precision guidance above and below Location: ex stock 54634 Bitburg - immediately available - Gjdjvk Sfbspfx Ab Teuk

Stanje: novo, Leto izdelave: 2025, Holzkraft Edge Sanding Machine: KSO 150 F PRO Oscillating sanding belt for optimal sanding results Article number: 5390020 Brand: Holzkraft Sanding unit tiltable via hand crank The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding performance Oscillation can be switched on or off as desired Graphite-coated sanding pad for increased belt service life Height-adjustable sanding table for utilizing the full belt width Additional table with extraction openings for sanding radii on the rubber-coated idler drum Sanding drum device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences Equipped with adjustable stops, ideal for veneer sanding The grooved veneer stop allows for precise sanding of veneer overhangs TECHNICAL DATA Dimensions and Weights Length (Product) approx.: 1700 mm Width/Depth (Product) approx.: 1000 mm Height (Product) approx.: 1150 mm Net Weight approx.: 300 kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Rated voltage: 400V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Sanding Unit Belt length: 2640 mm Belt width: 150 mm Belt speed: 14 m/s Guodpfov Sk Nnjx Ab Tsk Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Sanding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber drums Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Miter gauge

Stanje: novo, Leto izdelave: 2025, Clean-air dust extractor: RLA 140 For wood dust and chips, designed for commercial use Article number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested to H3; residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirement Maximum performance in its class Very quiet operation All models equipped with collision protection Application area Designed for commercial use For all woodworking machines with appropriately sized extraction sockets High-quality, well-engineered design Robust and compact housing made of galvanized steel sheet Extraction port easily convertible from left to right, allowing flexible applications Large inspection openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for rapid commissioning All models are mobile For model RLA 210: Optimal chip distribution in the containers due to large filter surface Filter description Ultra-compact design with maximum filter area Filter material made of polyester fleece, aluminum vapor-coated for high durability Filter comes standard in antistatic version, tested and approved according to M-BIA category Fan installed downstream of the filter TECHNICAL DATA Dimensions and weights Length (product) approx. 1241 mm Width/depth (product) approx. 830 mm Height (product) approx. 1750 mm Weight (net) approx. 210 kg Chip collection volume 165 l External diameter extraction port (inlet) 140 mm Extraction port axis to floor 850 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Efficiency class extraction motor IE3 Drive motor power 2.2 kW Filter Filter area 8.5 m² Residual dust content < 0.1 mg/m³ Gedpfx Abov Sk Tmj Tsuk Filter cleaning manual Noise emission Max. sound pressure level 71 dB(A) Airflow Nominal airflow 1108 m³/h Maximum airflow 1750 m³/h SCOPE OF DELIVERY Metal impeller wheel Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with locking brake Manual filter cleaning

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. Gjdpfx Ajdqzh Rsb Touk M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2025, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Guedpfx Aed Hx Hmeb Tjk Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Gedpshk S Stefx Ab Teuk Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of Delivery: Two filter bags, two chip bags Location: Available from stock 54634 Bitburg - Available at short notice -

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Weight (net) approx. 290 kg Dust Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1000 mm Sliding table length 1000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Required length 1945 mm Machine body width/depth 710 mm Required width/depth 2220 mm Working area length 1600 mm Explanation required space The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm Working area explanation Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Mains voltage 400 V Main drive motor power 5.0 kW Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 to -45° Spindle speeds 3500/7000/10000 min⁻¹ Usable spindle length 100 mm Spindle shaft diameter 30 mm Maximum spindle projection above table 130 mm Maximum Cutter Diameter Max. retractable cutter diameter 180 mm Max. cutter diameter for tenoning 275 mm Max. cutter diameter for profile milling 210 mm SCOPE OF DELIVERY Curved workpiece safety hood Anodised aluminium sliding table Gedpfshp Rcyex Ab Tsuk Telescopic mitre fence Aluminium fence jaws

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Capacity: 2 x 165 l Connection diameter (extraction inlet) outside: 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Network Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Guodpfxehkztte Ab Tek Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rate Nominal Airflow: 1448 m³/h Dust class: H3 Scope of delivery: - Metal fan wheel - Inspection opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed and two swivel castors with brake - Manual filter cleaning Item no. 5131620 Location: In stock, 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Holzkraft panel saw with scoring unit Compact panel saw with tiltable saw blade and high-quality sliding carriage made of anodised aluminium Cutting area of the compact panel saw directly on the rolling table Precision-guided format sliding carriage made of aluminium, anodised as standard Large-area table extension mounted on a telescopic arm, can be shifted longitudinally Standard table extension and table enlargement enable easy handling of larger workpieces Large-dimension cast iron saw assembly, double-mounted to the cast table, ensures maximum stability, precision, smooth operation, and long service life Large work table made of ground cast iron, making it extremely robust and resistant Smooth operation and precise cuts Aluminium sliding carriage With a proven ball contact system deployed millions of times Dust- and dirt-resistant due to minimal contact points between ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guideways Telescopic fence Extendable aluminium telescopic fence Angle-adjustable With two professional folding stops Ek2a0i2ik Rip fence Supplied with fine adjustment and quick release as standard Scope of delivery: Table extension Table enlargement Anodised aluminium panel sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut length: 1660 mm Max. cutting height at 90° with scorer: 100 mm Max. cutting height at 45° with scorer: 79 mm Max. crosscut width left of saw blade: 1270 mm Cutting width with rip fence: 900 mm Saw blade tilt: 90° - 45° Max. saw blade diameter with scorer: 315 mm Max. saw blade diameter without scorer: 315 mm Scoring blade diameter (option): 80 mm Main saw blade speed: 4000 rpm Scoring blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Gujdpoih Dwvsfx Ab Tsk Extraction outlet diameter: 120 mm Extraction outlet diameter saw guard: 60 mm Weight: 295 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Gujdpfsd Hx Hpex Ab Tek Feed Speed 5/8/12/18 m/min