Hoja Tla Priklopnika nakup rabljenega (2.694)

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: x-axis travel: 690 mm y-axis travel: 400 mm z-axis travel: 550 mm B-axis (table): 360° Control: Siemens 840 D Spindle speed: max. 15,000 rpm Tool clamping system: DIN 69893 standard Tool holder: HSK-A63 Tool magazine: chain magazine, 12 positions Traverse speed (x/y/z axis): 40 m/min Total power requirement: 195 kW Machine weight approx.: 13.0 t Travelling Column Machining Centre - The machining unit consists of 3 NC machining axes and 1 NC rotary table axis Kedsu Idl Sepfx Abbswt - Equipped with rotary indexing table, type SKH-NC 4/029; Ø=460 mm; table plate clamped Ø500x20 mm; max. table rotation speed 22 rpm, 4x 90° indexing - Operating panel: SIEMENS - Spindle type: DRF-WE-255-N-W-15-30, 15,000 rpm, spindle power = 30 kW - Chip conveyor: Knoll type 400K-3/280; discharge height 1,150 mm - Spindle cooling unit: SCHIMBKE type DK 80 V; 3.36 kW (internal coolant supply)

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approximate machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: Kwodpfx Abou Idvwobot No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 workstations and 15 drilling and milling spindles E.g., suitable for the production of large batches of fittings Further technical specifications: - Workpiece carrier: Drum-type workpiece holder, Ø 800 mm, for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; maximum speed 2240 rpm - Left side: 3x drilling/milling and drilling spindles, 2x tapping spindles - Right side: 2x drilling/milling spindles, 2x tapping spindles and 1x U-axis, plus radially 2x movable tapping spindles, 2x drilling/milling spindles (one of which is movable), and 1x movable U-axis - 1st tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Manual pulse generator as is.

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Kwodpeu Idxfjfx Abbot Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 1700 mm No. 4: LxWxH: 1000 x 500 x 1350 mm Space requirement approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 work stations and 15 drilling and milling spindles For example, suitable for the production of industrial fittings in high quantities (see photos) Further technical specifications of the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 interface; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - 1st tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Features: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Handheld control pendant This machine is not connected. Sale as is! Subject to prior sale.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total connected load: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles, e.g. for the production of larger quantities of fittings Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations; indexing time 10 sec. - Drilling and milling unit: SK 40 taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left: 3x drilling-milling spindles and drilling spindles, and 2x tapping spindles - Right: 2x drilling-milling spindles, 2x tapping spindles and 1x U-axis; plus radially adjustable 2x tapping spindles, 2x drilling-milling spindles (one adjustable), and 1x U-axis (adjustable) - 1st tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5–900 rpm; right/left - 2nd tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45–560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor Kwjdeu Idv Dspfx Abbjt - Belt filter by Filtertechnik Gera (nonwoven belt 430 mm) - Operating panel - Hand-held control unit in good condition.

Stanje: rabljeno, Leto izdelave: 1992, Technical details: Sheet width: 4050 mm Sheet thickness: 16 mm Distance between uprights: 4900 mm Control for program: Robosoft SC5 Controller Backgauge: 1000 mm, motorized Cutting angle: 0.5° - 3° Cutting gap adjustment: yes / adjustable in mm Hold-downs: 23 units Height above floor: 1030 mm Table size (L x W): 4000 x 520 mm Machine weight approx.: 19.2 t Machine dimensions: 5.2 x 2.2 x 2.78 m Additional features: - Blade length 4100 mm, can be rotated/reversed 4 times - Stroke rate: 5 – 11 cycles/min. - Table: side gauge with linear scale, with 1000 mm fence, removable; push assistance via/integrated ball supports - Front support: L x W x H: 1600 x 1100 x 1000 mm; movable via roller rail, easy handling - Backgauge adjustable, motor-driven and foldable Operation via control panel with jib arm and foot switch Equipment: - Light curtain at backgauge - Cutting line illumination Kodou Icpcspfx Abbowt Accessories: - 1 set (2 pieces) of shear blades

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Space requirements approx. (LxWxH): 5.0 x 6.2 x 3.8 m Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 work stations and 15 drilling/milling spindles For example, for the production of fittings in larger quantities Further technical specifications: Kwsdeu Idxrspfx Abbjt - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm - Left: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm; radial 3x drilling and milling spindles, including 1x U-axis and 1x thread cutting spindle - 1st thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Control panel - Hand-held selector switch in process.

Stanje: rabljeno, Technical Details: Machine weight approx.: 4.0 t Machine dimensions LxWxH: 1.8 x 1.8 x 0.9 m Machine table with 5 rotary indexing tables for multi-side machining Application: Multi-side machining of workpieces in rotary transfer machines in a single operation on 5 rotary indexing tables equipped with clamping fixtures. Design: Round, stationary base body with 5 rotary indexing tables arranged in a pentagon layout and a centrally mounted rotary table. Description: Central rotary table = pentagon design, diagonal 830 mm; circumscribed circle Ø 873 mm, side length 513 mm 5x rotary indexing tables, arranged as a regular pentagon on the machine body, pitch circle Ø = 1280 mm, table design as truncated square 380x380 mm, clamping via 4 Röhm taper clamping units and 1 central centering flange, 360° rotatable, workpiece Ø approx. 730 mm Operation/drive is hydraulic Sold as is. Kedou N D S Uspfx Abbswt

Stanje: rabljeno, Leto izdelave: 1993, Technical details: Sheet width: 3050 mm Sheet thickness: 6.0 mm Frame gap: 3460 mm Strokes per minute: min./max.: 9 / 17 strokes/min Backgauge: 750 mm (motorized) Cutting angle: 0.5° - 3.0° Blade clearance adjustment: manual Hold-downs: 18 units (hydraulic) Table size: 380 x 3100 mm Total connected load: 7.5 kW Machine weight approx.: 4.56 t Machine dimensions: L: 2.3 x W: 3.7 x H: 1.8 m Equipment: - with side stop L: 1000 x W: 100 x H: 60 mm and stop bar 990 mm, with 8 supports - Operation via control panel and foot switch - Cutting zone illumination Kwodpfx Abou Rni Hsbjt - Stroke counter - Machine feet as per details.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display Kwodjx Ta Smopfx Abbet - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) Kjdpfx Aex Ta R Nebbswt F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Kjdpfex Ta Rpjx Abbswt Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2021, obratovalne ure: 10 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. Kedjx Ta Nxepfx Abbewt MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 20.000 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: GA11VSD+FF, Compressor compressed air system Atlas Copco Comprising: Compressor GA18 Plus, year 2007 Compressor GA11VSD+FF, year 2017 Control unit ES 6 Kwodpfxsvx Nmfo Abbjt Buyer is responsible for professional dismantling. Forklift will be provided.

Stanje: dober (rabljeno), Leto izdelave: 2014, Vključno z obstoječimi rezervnimi filtri. Pretok zraka: 8000 m³/h Električna priključna moč: 1,5 kW 400 V/50 Hz Širina: 2000 mm Višina: 1650 mm Globina: 1000 mm Teža pribl. 120 kg Kedpfox Uz A Aox Abbjwt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 20.900 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 4.500 kg, moč: 45 kW (61,18 KM), kapaciteta rezervoarja za gorivo: 2.000 l, obratovalni tlak: 10 letvica, vrsta hlajenja: zrak, Complete compressor room Atlas Copco GA75VSD, year 2013, 46,100 operating hours - 75 kW - max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, year 2007, 21,000 operating hours - 45 kW - max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, year 2013 refrigeration dryer Dimensions: W120 x D110 x H100 cm MaBe 2000L tank, year 2016, height 2.85 m Incl. oil-water separator The plant is currently still in operation, so hours may vary. The system is fully functional and has been regularly serviced. Service kits and oils are included. Very good condition, see pictures. Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with ZIP code. Kwodev Snn Ispfx Abbst

Stanje: dober (rabljeno), steady rest (5122) Shaft diameter: 100 mm Kodpfsc Unyhox Abbowt Center height: 150 mm Mounting hole distance: 85 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Oferujemy x2 sprężarki ATLAS COPCO ZR 400 7,5 o następujących parametrach technicznych: - Maksymalne ciśnienie robocze: 7,5 bar - Przepracowane godziny: 53 000 - Moc zainstalowana: 355 kW - Prędkość obrotowa wału: 1485 obr./min - Rok produkcji: 2014 Ksdpfou Szu Nox Abbowt Sprężarki zostały zdemontowane z przedsiębiorstwa, które zakończyło działalność. Wyposażenie dodatkowe: Sprężarki sprzedawane są w komplecie z x2 osuszaczami powietrza Atlas Copco, model: MD1000 W CE, o parametrach: - Maksymalne ciśnienie robocze: 10,5 bar - Rok produkcji: 2014 Prosimy o przesyłanie ofert cenowych bezpośrednio przy nawiązywaniu kontaktu.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Max Photonics, laserska moč: 6.000 W, trajanje garancije: 6 meseci, leto zadnje generalne obnove: 2025, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, Company Profile & Services – LaserEVO GmbH LaserEVO GmbH is a specialized and independent service provider for maintenance, repair, and technical upgrades of industrial laser cutting systems from various manufacturers. Our focus is on CO₂ and fiber laser systems. Kodpfx Asr Igxljbbjwt Our range of services at a glance: • Professional servicing and repair of industrial laser cutting machines • Power upgrades for fiber laser sources • Retrofit solutions from CO₂ to fiber lasers • Repair and replacement of fiber laser modules • Servicing, repair, and overhaul of cutting heads • Supply of spare and wear parts for laser cutting systems Legal notice: LaserEVO GmbH is an independent service provider and is not affiliated in any commercial, legal, or economic way with Bystronic AG, IPG Photonics, HighYAG, or any other mentioned manufacturers. The mention of brand or product names is solely for the technical identification of compatible machines and components and does not constitute a recommendation, endorsement, or partnership.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 17.555 h, Funkcionalnost: popolnoma funkcionalen, Vijačni kompresor Atlas Copco GA110VSD. 110 kW z 8,5 bara in 21,60 m3/min. Integriran pretvornik. Kodex Iu H Uepfx Abbswt

Leto izdelave: 2024, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: kotni ventil, odsesavanje hlapov, odsesavanje prahu, For sale: JustLaser Fiber Laser Model JustMark 4.2. The unit was purchased new in December 2024, directly from the manufacturer JustLaser, located in Haag an der Amper (location of the machine). Included is a dedicated extraction system from the same manufacturer, as well as two lenses with engraving fields of: 110x110mm and 150x150mm engraving area. The machine has been used very little and is in as-new condition. Selling due to reinvestment. It is ideal for processing metals, stainless steel, plastics, etc. Manufacturer description: The JustMark fiber laser guarantees the simplest and fastest laser marking. Thanks to its secure and durable product design and low investment costs, JustMark provides a risk-free entry into the world of laser markers. It is particularly suitable as an efficient, flexible, and fast laser marker for applications in mechanical engineering, medical technology, toolmaking, automotive industry, electronics & semiconductors, nameplate marking, plastics processing, inscriptions on watch parts, ball bearings, handguns, and much more. The JustMark 4.2 is the ideal entry-level solution for laser marking. With its compact dimensions, the JustMark 4.2 laser marker is a space-saving solution for quick and easy operation. Typical applications for this fiber laser include marking nameplates, components, tools, and more made from metal and plastic. Kwjdox N Nbvjpfx Abbet Inspection is possible by appointment at any time. Pick-up only. Price is net, and an invoice with VAT will be provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 35.741 h, Funkcionalnost: popolnoma funkcionalen, Vijačni kompresor Atlas Copco GA15VSDFF. Sušilec in pretvornik sta integrirana. 15 kW, 13 bar, 2,91 m3/min. Kedpfsx Igzkex Abbowt

Stanje: pripravljen za uporabo (rabljen), HACO - ATLANTIC HPA 30-135 / Tlačna sila 135 ton - Tlačna sila 135 ton - Upogibna dolžina 3050 mm - Prehod med stojali 2550 mm - Kompletna zgornja greda / orodja in ločeni segmenti v različnih dolžinah - Dve matrici - Motorizirana nastavitev višine - Zadnji omejevalnik - ročni - 2x sprednja podpora / podpora za material - Nožno stikalo / ročno stikalo Kwsdpfx Aex Swg Eobbet Dimenzije: DxŠxV 4x1,9x2,5 metra / Teža 8.500 kg Možne so napake in vnosne napake.

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: CAI710777, moč: 7,5 kW (10,20 KM), obratovalni tlak: 9 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, kompresor, sistem stisnjenega zraka, The Atlas Copco GA7 FF lubricated compressor is an ideal solution for businesses seeking reliability and efficiency in their operations. Designed by Atlas Copco, this pre-owned model offers a power output of 7.5 kW, delivering robust performance suitable for a wide range of industrial applications. Kodpfx Abox Uydrsbswt Operating at a maximum pressure of 9.75 bar, the GA7 FF is fully capable of meeting demanding pneumatic system requirements. Its durable construction ensures a long service life and optimal operation, even in challenging environments. The compact design allows for easy integration into most facilities without the need for major modifications. This Atlas Copco compressor stands out thanks to its ability to reduce energy consumption while maintaining high production levels, thereby helping to lower operational costs. It is a smart choice for those looking for dependable, high-performance equipment on the used machinery market.

Stanje: zelo dobro (rabljeno), Hladilni sušilec stisnjenega zraka Proizvajalec: Atlas Copco Tip: FD 120 Leto izdelave: N.A. Predvidoma 2013-2014 Kwedpfx Abjya A Uvjbjt Volumenski pretok: 120 l/s Maks. delovni tlak: 14 bar Izguba tlaka: 0,11 bar Teža: 160 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 6.280 kg, lastna masa: 5.760 kg, Leto izdelave: 2014, obratovalne ure: 3.100 h, Oprema: kabina, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, Atlas 75e čelni nakladač z vilicami in žlico, čist in pripravljen za takojšnjo uporabo. Zaslon je bil zamenjan pri Atlasu leta 2023 pri približno 2.700 urah, trenutni zaslon kaže 460 obratovalnih ur, skupaj približno 3.100 ur. Transport in dostava možna. Ogled po dogovoru možen tudi ob vikendih. Kedpfx Absyacylsbswt