Hlajenje Celic nakup rabljenega (2.020)

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C Nedjzizmnjpfx Alteld - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C Nsdpfezizmbox Altsld - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), TIRA Type: TCZ 4022 S-2K Description: Air-cooled Climate Simulation Chamber System Configuration: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068) - Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C - Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test room load) Njdpfjzizk Hox Altold - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test room load) - With max. 16 kW heat compensation - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test room (W x D x H): approx. 2260 x 4648 x 2260 mm - Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test room door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design features: - Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area - Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger - Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm - Test room lighting: 4 spotlights, each 500 W - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Complete unit: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Nodezizghjpfx Alteld Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Nljdpfx Ajzizdyslted Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Paddle Mixer / Vacuum-Cooled Paddle Mixer Seydelmann with CO2 cooling and transfer pump, 4000 liters capacity. Column loading system. Two units available, can be purchased separately. Double-shaft paddle mixer/vacuum-cooled mixing machine by Seydelmann, equipped with Oslos column lifter for pallet boxes. Model: PV 4000 Voltage: 400 V, 50 Hz, 125 A Power: 60 kW Weight: 6500 kg Dimensions: 4250 mm x 2300 mm x 2750 mm Lifting Device Brand: Oslos Model: Column Loader 1000S Voltage: 380 V, 3 Ph, 50 Hz, 5.2 A Power: 2.2 kW Lifting capacity: 1000 kg Lifter dimensions: 700 mm x 2600 mm x 4200 mm Lifting arm dimensions: 1750 mm x 1600 mm x 1250 mm Nljdpfx Alswxm E Rjtjd

Stanje: rabljeno, Preverjeno delovanje; artikel izhaja iz demontaže opreme avtomobilskega dobavitelja. Nljdpfjzgbz Hex Altjd Proizvajalec: Mettler Toledo Tip: IMPGI0015K4-2H-SA Funkcija: Precizna merilna celica za industrijske aplikacije Merilno načelo: merilni trak (strain gauge) Material: nerjaveče jeklo Zaščitni razred: IP68 Izhodni signal: milivolt na volt (mV/V) Napajalna napetost: 5–12 V DC Tip priključka: 4-žilni Uporaba: platformske tehtnice, dozirni in polnilni sistemi

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Miltenyi Biotec CliniMACS Plus, magnetni separator celic, letnik 2020. Uporabniku prijazne ključne komponente instrumenta CliniMACS Plus omogočajo napredne aplikacije za različne vrste ločevanja celic. Izbrane matične celice, monociti, dendritične celice (DC), naravne celice ubijalke (NK), B in različne podskupine T celic omogočajo raziskave na področju regenerativne medicine, adoptivne imunoterapije in inženiringa presadkov. Celic se magnetno označi v pripravljalni vrečki s specifičnim antigenim reagentom. Nato se pripravljalna vrečka priključi na instrument CliniMACS Plus. Intuitivna programska oprema omogoča obogatitev ali odstranitev ciljnih celic ter končni zbir v zbiralni vrečki. Sistem CliniMACS omogoča ločevanje večjih količin celic z visoko čistostjo ciljnih celic in odličnim izkoristkom. Njdpfxet E Hmro Altjld Električna napetost: 100-240V, 50/60Hz, 4A, 350VA Dobro ohranjen in delujoč. Oglejte si še druge naše oglase.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naprodaj je visokokakovostna FELSOMAT FlexBox za avtomatizirano rokovanje z obdelovanci v serijski proizvodnji. Naprava je zasnovana za avtomatsko nalaganje in razlaganje CNC stružnic, rezkalnih, brusilnih ali zobarskih strojev. Opremljena je s servopogonskim rokovalnim sistemom s pnevmatskim prijemalom, ter dodatno linearno prenosno osjo, ki omogoča obdelavo več postaj ali večje premike. Sistem izhaja iz industrijske proizvodnje in je idealen za proizvajalce posebnih strojev, avtomatizatorje ali kot osnova za retrofit projekte. Oprema FELSOMAT FlexBox Popolnoma zaprta varnostna celica Avtomatsko linearno rokovanje Servopogonske osi Pnevmatsko prijemalo za obdelovance Dodatna linearna prenosna os Skladišče za obdelovance Upravljalni panel Varnostni nadzor Vgrajena elektro omara Priključek za odsesavanje Popolnoma ožičena Tipična področja uporabe CNC stružnice CNC obdelovalni centri Brusilni stroji Zobarski stroji Merilne postaje Montažna avtomatizacija Proizvodne celice Tehnični podatki (tipični) Lastnost Podatek Proizvajalec FELSOMAT Model FlexBox Tip Avtomatizacijska celica Osi Servopogon linearni sistem Prijemalo pnevmatsko Rokovanje z obdelovanci avtomatsko Napajanje 400 V Varnostna kabina prisotna Dodatna os linearni transfer Obseg dobave FELSOMAT FlexBox Servo-handling Linearna prenosna os Prijemalni sistem Upravljalni panel Elektro omara Varnostna kabina Stanje Nljdpjzivapefx Altjd Naprava je v dobro ohranjenem vizualnem stanju. Rokovalni sistem, linearna os ter varnostne naprave so v celoti prisotne. Stroj se prodaja zaradi zaprtja podjetja. Ogled je možen po predhodnem dogovoru kadarkoli.

Stanje: pripravljen za uporabo (rabljen), Izvedba: prepustni celični ventil, zgornji priključek: okrogla prirobnica, pogon: SEW zobniški motor, s pnevmatsko zaporno zračno/gredno tesnilno enoto, filter regulatorjem, manometrom in priključki za cevi, primeren za plastiko, živila, hrano za hišne ljubljenčke, krmila, farmacijo, hrano za dojenčke, kemikalije, biomaso, akvakulturo, mlečne izdelke, kozmetiko, barve/lake, minerale, reciklažo, baterije, pnevmatike. Možen ogled na lokaciji, ni pod napetostjo. Nlsdpfxezhw Sqo Alted

Stanje: pripravljen za uporabo (rabljen), Profesjonalna wywrotnica próżniowa MA-3600PSCH renomowanej firmy Metalbud Nowicki to urządzenie zaprojektowane do intensywnej eksploatacji w przemyśle mięsnym. Model ten doskonale nadaje się do zmiękczania, marynowania i peklowania mięsa, a także poprawy struktury oraz wydajności gotowego produktu. Zastosowanie technologii próżniowej umożliwia głębszą penetrację marynat i ogranicza ubytki wagowe. Solidna, kwasoodporna konstrukcja ze stali nierdzewnej oraz intuicyjna obsługa czynią tę maszynę idealnym rozwiązaniem dla średnich i dużych zakładów przetwórstwa spożywczego. Nodjwxxbqjpfx Altold Specyfikacja techniczna: Producent: Metalbud Nowicki (Polska) Model: MA-3600PSCH Rok produkcji: 2006 Zasilanie: 3x400V / 50Hz Moc zainstalowana: 5,3 kW Maks. pobór prądu: 13 A Waga urządzenia: 2000 kg Wymiary (dł. x szer. x wys.): 4 m × 1,75 m × 2,05 m ✅ Zalety wywrotnicy próżniowej NOWICKI MA-3600PSCH: • Wysoka wydajność oraz duża pojemność bębna – idealna do produkcji na dużą skalę • Cyrkulacja próżniowa poprawiająca jakość i strukturę mięsa • Kwasoodporna konstrukcja – trwałość i łatwość utrzymania higieny • Niskie zużycie energii w stosunku do wydajności • Prosta obsługa i możliwość programowania parametrów • Pełna dokumentacja techniczna oraz schemat elektryczny w komplecie • Sprawdzona jakość marki Metalbud Nowicki – lidera rozwiązań dla przemysłu spożywczego Wywrotnica próżniowa NOWICKI MA-3600PSCH dostępna od ręki – to idealna inwestycja dla zakładów poszukujących efektywnych oraz niezawodnych rozwiązań w zakresie obróbki mięsa.

Stanje: dober (rabljeno), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical Data Climate Chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5 °C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Nedpfx Aozg Txqoltold Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical specifications. All data provided are subject to confirmation!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical Data Sun Simulation: Control unit: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Nledpjzg Txkjfx Altod Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications excepted!) If you have any further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), RS Simulators Nedpfxszg Txdj Altsld Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), TIRA Model: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Nodpfx Aezg Tw Toltjld Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (See picture) (Technical data and specifications are subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Nlsdezg Tw Hjpfx Altod Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Condition: Used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) If you have any further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), TIRA Type: Walk-in Climate Simulation Chamber TTZ 4008 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Nljdpfx Alozg Twmjted Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. Specifications are subject to change!) Should you have further questions, we would be happy to answer them by phone.

Stanje: rabljeno, Conveyor belt, belt conveyor, transport belt, belt band conveyor, chain conveyor, pallet conveyor belt, pallet conveyor -Drive: SEW-Eurodrive geared motor with brake 0.55 kW/15 m/min -Weighing cell: Bizerba HLC-C3 -Chain track width: 750 mm -Dimensions: 1995/990/H480 mm -Weight: 334 kg Nljdpfjgnnb Sox Altsd

Leto izdelave: 2010, stanje: rabljeno, Shear Beam Load Cell - Rated Capacity: 500 kg - Rated Output Tolerance: % +/- 0.1 - Stainless Steel: 1.4548 Njdpfx Aledkpa Soteld - Protection Class: IP68 - Legal for Trade (verifiable) - Dimensions: 32/32/130 mm - Net Weight: 0.98 kg

Stanje: rabljeno, Load cell, double bending beam load cell Nlodsd Al Hispfx Alted -Rated load: 100 kg -Accuracy class: C3 -Cable length: 3 m -Material: Stainless steel -Protection rating: IP 68 -Dimensions: 39/120 mm -Net weight: 0.4 kg

Leto izdelave: 2000, stanje: dober (rabljeno), Dozirni celični zapah, celični zapah, dozirni zapah, celični zapah za polžasti transporter, polžasti transporter, transportni polž, transportna tehnika, cevni polžasti transporter - Celični zapah, tip JK-S s 6-krilnim rotorjem, z pogonom - Število vrtljajev: 19 obr/min Nlodpfxjw Hzx Ue Alted - Pogonski motor: KEB 0,55 kW - Vstopna/izstopna odprtina: 220 x 1500 mm - Dimenzije: 340/1970/V305 mm - Teža: 113 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, The Matest C313N is a laboratory freeze-thaw and climate chamber primarily used for building materials testing – particularly to investigate the behavior of concrete, cement, aggregates, and other materials under varying temperature and humidity conditions. Main areas of application: - Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal cycling). - Durability testing of construction materials according to standards (e.g., EN 1367-1). - Accelerated aging and climate tests under various environmental conditions. Nodpfxjy R D D Uj Altold Features: ✔ Control of two parameters: temperature and humidity. ✔ Temperature range: approx. -30°C to +70°C. ✔ Humidity range: 20–95% (±1% accuracy within the relevant temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments configurable. ✔ 5" color display: real-time clock and optional data logging via PC connection. ✔ Stainless steel interior and exterior housing for long service life. Fields of application: - Freeze-thaw cycle testing on concrete and building materials: demonstrates how the material may crack or be damaged by thermal cycling. - Quality control of construction materials under laboratory conditions. - Environmental and climate testing, where precise control of temperature and humidity is required.

Stanje: dober (rabljeno), Leto izdelave: 2016, skupna dolžina: 2.500 mm, skupna širina: 1.300 mm, skupna višina: 1.600 mm, skupna masa: 927 kg, vhodna napetost: 400 V, moč: 2,7 kW (3,67 KM), kapaciteta rezervoarja: 1.000 l, Nowicki MA-1000 PSCH – vakuumska naprava za mariniranje z možnostjo hlajenja Nlodpfszlpa Iox Altjd Nowicki vakuumska naprava za mariniranje s kapaciteto 1.000 litrov in možnostjo hlajenja (vključno s hladilno enoto), zasnovana za plastificiranje mišic, delov mesa, drobnih mesnih izdelkov ter perutnine in njenih delov v vakuumu. Zagotavlja visoko kakovost proizvedenih izdelkov iz mesne dobrote. Prednosti zasnove: * zasnova, odporna na kisline * natančno izbrana oblika bobna in sistema nožev za mariniranje * mikroprocesorski upravljalnik * gladka regulacija vseh parametrov mariniranja * sistem za regulacijo vakuuma, ki ne potrebuje vzdrževanja * večstopenjski zaščitni sistem za vakuumsko črpalko * tehnološka odprtina * ventil za dovod salamure * pulzirajoči vakuum * možnost mariniranja v zamenljivem (plinastem) okolju * računalniški sistem za spremljanje delovnih parametrov naprave Proizvajalec: Nowicki Model: MA-1000 PSCH Letnik: 2016 Kapaciteta: 1.000 litrov (500 kg) Napetost: 400 V / 50 Hz / 2,7 kW Dimenzije naprave (D x Š x V): 2.500 x 1.300 x 1.600 mm Teža naprave: 927 kg

Stanje: skoraj kot novo (rabljeno), obratovalne ure: 33 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.500 kg, Fanuc – varilni robot – celica Nodpfxszggwmj Altold Tip: ARC Mate 100iC 12 Nosilnost: 12 kg Varilni vir: Fronius Guttroff GRZ 2.3-01-201 Letnik: 2016 Obratovalne ure varjenja: cca 33 Doseg: glej tehnični list v prilogi Pripravljeno za odsesavanje Čiščenje gorilnika Obratna miza System Siegmund z integrirano svetlobno zaščito Robot je vgrajen v zaprto celico, ki ima vso potrebno varnostno opremo. Varilno celico je leta 2016 kot demo napravo zgradilo podjetje Guttroff. Leta 2022 smo celico kupili, vendar ni bila uporabljena. V prilogi so fotografirani podatki o obratovalnih urah, čisti čas varjenja cca. 34 h Naprava je v brezhibnem stanju. Zunanje mere Teža: 2500 kg

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Njdpfx Alozd Sdgjtjld - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.