Hlajenje Celic nakup rabljenega (1.467)

Stanje: rabljeno, Leto izdelave: 2013, Compressed Air Refrigeration Dryer Model: MG 110 Year of manufacture: 2013 Air flow rate: 6,600 m³/h or 110.0 m³/min Rated power: 8.99 kW Nkedpeu Rn Trjfx Abbot The air dryer is fully operational and was regularly serviced and inspected up until decommissioning.

Stanje: dober (rabljeno), Leto izdelave: 2019,

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 027/103, This cooling tank from Primac is located at Plastima Used Machinery's equipment storage. The cooling tank dates from 1994 and is in excellent condition. – Brand: Primac – Model: CV.2C. 125/6 – Maximum pipe diameter: 125 mm – Cooling length: 6000 mm Nsdpfxjrgqnro Abbekt – Year of manufacture: 1994

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 15.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4007342, rosišče pod tlakom: 3 °C, tlak (maks.): 14 letvica, Oprema: Na voljo je tipska ploščica, Beko Drypoint RA 120, za prevzem, lokacija Hildesheim 31137, še priključen, možen preizkus Nkjdpow Slhpefx Abbet

Stanje: dober (rabljeno), Tukaj vam ponujamo separator kondenzata BEKO Öwamat 4. Njdpextu Nkjfx Abbekt Za ponudbo nas kontaktirajte.

Stanje: rabljeno, Power source for orbital welding unit MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding system MESSER GRIESHEIM - POLYSOUDE RC200 Welding power supply, inverter welder POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Serial no. (welding source): 9885186 Serial no. (cooling unit): 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours read off - Operating and maintenance manual Space requirements welding unit (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight of welding unit: 45 kg Nsdpfx Ajt Awm Debbokt Weight of cooling unit: 25 kg Good condition Without accessories Price is for a set consisting of 1 x power source and 1 x water cooler.

Stanje: novo, Leto izdelave: 2024, Exhibit item (immediately available): New KAESER TA5 Refrigeration Compressed Air Dryer with energy-saving SECOTEC control system. Equipped with float-controlled condensate drain and refrigerant storage. Year of manufacture: 2024 Technical data: Volume flow: 0.60 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 3/4" Dimensions (W x D x H): 630 x 484 x 779 mm Nkedsh Rwd Ropfx Abbot Weight: 70 kg Electrical supply: 230 V / 1 / 50 Hz Visit our showroom in Erlangen. On over 450 sqm of exhibition space, you will find a large selection of used and new compressors.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: TR0056_TA11, Exhibition model: New KAESER TA11 Refrigerated Compressed Air Dryer with energy-saving SECOTEC control system. Equipped with electronically controlled condensate drain and refrigeration storage. Year of manufacture: 2024 Technical data: Volume flow: 1.25 m³/min Njdpfjhmu Urex Abbekt Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 3/4" Dimensions (W x D x H): 630 x 484 x 779 mm Weight: 85 kg Electrical supply: 230 V / 1 / 50 Hz Visit our showroom in Erlangen. With over 450 sqm of exhibition space, you will find a large selection of new and used compressors.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1.2477.2, volumenski pretok: 930 m³/h, skupna širina: 712 mm, skupna dolžina: 982 mm, skupna višina: 1.612 mm, skupna masa: 249 kg, vhodna napetost: 400 V, okoljska temperatura (maks.): 45 °C, temperatura okolja (min.): 3 °C, vrsta hlajenja: zrak, tlak (maks.): 16 letvica, Immediately available: Compressed Air Refrigeration Dryer KAESER TE 142 with energy-saving SECOTEC control system. Equipped with electronically level-controlled condensate drain, cold storage module, and SIGMA CONTROL SMART controller. Year of manufacture: 2025 Technical data: Volume flow: 15.5 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +45°C Compressed air connection: G 2" Nodpfjwvampsx Abbokt Dimensions (W x D x H): 712 x 982 x 1612 mm Weight: 249 kg Electrical supply: 400 V / 3 / 50 Hz Visit our premises in Erlangen. On over 450 sqm of exhibition space, you will find a wide selection of used and new compressors.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1.2483.1, volumenski pretok: 2.040 m³/h, skupna širina: 835 mm, skupna dolžina: 1.230 mm, skupna višina: 2.000 mm, skupna masa: 420 kg, vhodna napetost: 400 V, okoljska temperatura (maks.): 45 °C, temperatura okolja (min.): 3 °C, vrsta hlajenja: zrak, tlak (maks.): 16 letvica, Available immediately: Compressed Air Refrigeration Dryer KAESER TF 340 with energy-saving SECOTEC control system. with electronically level-controlled condensate drain with refrigeration storage tank with SIGMA CONTROL SMART controller Nedpfswvag Aox Abbekt Year of manufacture: 2025 Technical data: Volume flow: 34.0 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +45°C Compressed air connection: DIN flange DN 80 PN 16 Dimensions (W x D x H): 835 x 1230 x 2000 mm Weight: 420 kg Electrical supply: 400 V / 3 / 50 Hz Visit our premises in Erlangen. On more than 450 sqm of showroom space, you will find a large selection of used and new compressors.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 1.680 m³/h, skupna širina: 1.000 mm, skupna dolžina: 790 mm, skupna višina: 1.590 mm, skupna masa: 262 kg, Exhibition Piece: Renner DV 1650 AB Refrigerated Compressed Air Dryer (Made by Donaldson Ultrafilter) with hot gas bypass control Njdpfeqv Egisx Abbokt with electronically level-controlled condensate drain Year of manufacture: 2023 The electronic controller with display shows the current pressure dew point, operating hours, as well as service and alarm messages and offers numerous options for individual settings. Technical Data: Volume flow: 28.00 m³/min Power consumption: 3.10 kW Pressure drop: 0.16 bar Connection: DN 80 PN 16 Condensate outlet: 1/2" Electrical supply: 3 Ph / 400V / 50Hz Dimensions (L x W x H): 79 x 100 x 159 cm Weight: 262 kg Visit our showroom in Erlangen. On over 450 sqm of exhibition space, you will find a large selection of used and new compressors.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: TR0067_TA8, Exhibition piece: New KAESER TA8 refrigerated compressed air dryer with energy-saving SECOTEC control system. with electronically controlled condensate drain with cold storage Year of manufacture: 2023 Technical data: Volume flow: 0.8 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Njdpjhu R Hnofx Abbekt Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 3/4" Dimensions (W x D x H): 630 x 484 x 779 mm Weight: 80 kg Electrical supply: 230 V / 1 / 50 Hz Visit our showroom in Erlangen. On more than 450 m² of exhibition space, you will find a wide range of used and new compressors.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1.2487.0, volumenski pretok: 3.900 m³/h, skupna širina: 1.025 mm, skupna dolžina: 1.656 mm, skupna višina: 2.127 mm, skupna masa: 704 kg, vhodna napetost: 400 V, okoljska temperatura (maks.): 50 °C, temperatura okolja (min.): 3 °C, vrsta hlajenja: zrak, tlak (maks.): 13 letvica, Immediately available, unused customer return: Compressed Air Refrigeration Dryer KAESER TG 650 with energy-saving SECOTEC control system. with electronically level-controlled condensate drain with refrigeration storage with SIGMA CONTROL SMART controller Year of manufacture: 2025 Technical data: Volume flow: 65.0 m³/min Pressure dew point: 3°C Overpressure: 3 to 13 bar Ambient temperature: +3°C to +50°C Max. compressed air inlet temperature: +60°C Compressed air connection: DIN flange DN 150 PN 16 Dimensions (W x D x H): 1025 x 1656 x 2127 mm Nodpfx Ajwu Ukmebbskt Weight: 704 kg Electrical supply: 400 V / 3 / 50 Hz Visit our showroom in Erlangen. On over 450 sqm of exhibition space, you will find a large selection of used and new compressors.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) Nkjdpfxsg Ey T Eo Abbot - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water Nedpfsg Ey Ufex Abbokt - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Nksdsftm Hrjpfx Abbjt HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Nkjdpfx Asg Ey Rfebbot Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) Nkjdpfx Absg Ezarobjt - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: rabljeno, Leto izdelave: 2014,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, 1 x Refrigeration Dryer Kaeser TA 5 Year of manufacture: 2011 In as-new condition. With operating manual. (Photo to follow) Nedov Tbuqspfx Abbskt The dryer can be inspected at our warehouse at any time.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Cooling capacity at water supply/return temperature of 15/10°C: 2.3/2.1 kW Flow rate: 0.5 m³/h Electrical connection: 380 V, 1 kW Nsdpfx Ajr Ezdrsbbekt Space requirement: 900 x 600 x 1020 mm Weight: 160 kg Water connections reduced to 1/2".

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 0841412556, Offener Milchkühltank FRIGOMILK G1, 200 Liter, 2 Melkgänge SERIENNUMMER: 0841412556 TECHNISCHE DATEN HERSTELLERANGABEN: - Innenbehälter und Außenverkleidung aus Edelstahl AISI 304, auf Rollen; - maximales Volumen 212 Liter, Nennvolumen 200 Liter; - Durchmesser 784 mm; - Gesamthöhe 1800 mm; - Gesamtgewicht 77 kg; - Spannung 1230 V; - Max. Druck: 14 bar; - Hochdruckseite: 28 bar; - Nennleistung: 0,82 kW; - Kompressorleistung des Kühlaggregats: 0,5 PS; - Primärfläche des Trapcold™-Laserschweißverdampfers für höchste Effizienz. Nodpjild N Rjfx Abbokt - Extra starke, umweltfreundliche und leistungsfähige Polyurethanschaum-Isolierung. - DN50 Auslauf – Schmetterlingsventil inklusive. - Millimetergenauer Edelstahl-Peilstab zur Direktablesung des Milchpegels in Litern. KÜHLSYSTEM: - Vereisungsfrei, kühlt auch bei geringem Füllstand; - Direktexpansion; - Kältemittel R404A; - Edelstahlgehäuse. - Kompakt und einfach zu installieren. ELEKTRISCHES SYSTEM: - FIPO 0 elektronischer Milch-Controller; - Temperaturkontrolle und Anzeige der Milch; - Rührwerk-Programm; - Anschlusskabel mit genormtem Stecker (männlich), 380 V; - Edelstahlellenbogen; - 60 Hz Netzfrequenz. Sehr guter technischer Zustand. Nur für rumänische Unternehmen besteht die Möglichkeit des Ratenkaufs, Anzahlung erforderlich. Preis: 2.300 Euro + MwSt., verhandelbar, FCA: Oradea/Rumänien. Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, številka stroja/vozila: 11182, skupna masa: 1.200 kg, 1 fast neuer Prüfstand für Brennstoffzellen-Stacks Leistungscharakterisierung und Alterungstests im SOFC/SOEC-Betrieb Nkjdpfx Absw E Iw Iobst 4-facher Zell-Teststand, Typ FCTR-C-..... Stackaufnahme nicht im Lieferumfang! Baujahr 2024. Vorab genommen beim Lieferanten, Endabnahme im Werk, einschließlich aller sicherheitsrelevanten Prüfungen. Dauerläufe und Produkttests. Keine Produktion. Betriebsbereit. Weitere Informationen finden Sie in den zwei angehängten Datenblättern. Bitte nennen Sie uns Ihren Angebotspreis. Verkauf ausschließlich innerhalb Europas (EU) einschließlich Türkei, Großbritannien und Schweiz. Technische Daten siehe Handout. Ohne Verpackung; jegliche Gewährleistung ist ausgeschlossen. Sollten Sie die Anlage selbst demontieren wollen, bitten wir um entsprechende Information in Ihrem Angebot. Für die Richtigkeit der technischen Daten, für die Vollständigkeit von Zubehör und Werkzeugausstattung sowie für die Einhaltung aller in den Unfallverhütungsvorschriften genannten Sicherheits- und Umweltschutzanforderungen übernehmen wir keine Gewähr.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11192, 1 nearly new fuel cell stack test bench Performance characterisation and aging tests in SOFC/SOEC operation 4-station cell test bench, type FCTR-C-..... Stack holder not included in the scope of supply! Year of manufacture: 2024. Pre-commissioned at the supplier, final acceptance and all safety-relevant tests performed at the facility. Endurance and product tests conducted, not used in production. The unit is operational. Nkedpfx Abew E I U Tjbst Further information available in the two attached data sheets. ----- Please submit your offer price. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland. ----- Technical details: see data sheet. Ex works, without packaging; any warranty is excluded. If you wish to dismantle the system yourself, please notify us accordingly in your offer. We assume no liability for the correctness of the technical data, the completeness of accessories and tooling, or for compliance with safety and environmental protection requirements as per accident prevention regulations.

Stanje: rabljeno, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Model: WT-2000PV Type: µ-PCD Nksdopvkt Sjpfx Abbet Condition: Used