Hermes nakup rabljenega (404)

Stanje: zelo dobro (rabljeno), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat / temperature switch unused in original packaging -Type: TBFR 112 spez -Temperature range: 18 to 55 °C -Carton dimensions: 220/120/H50 mm Iedpfjqv Hp Uox Adkstd -Weight: 0.5 kg

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F.24442.03.03, Unique opportunity for serial manufacturers Ijdpfxswpd Rrs Adkstd We are offering you an immediately available, top-tier thermoforming linear system with automatic tool change, rotary table, heavy-duty lower table with spindle drive, tool change station, maintenance platform, hot melt extraction, heating enclosure, and many other special features, directly from the manufacturer FRIMO. The system was most recently used for producing automotive door panels. The film itself was coated with hot melt adhesive. However, the system can also be used for dispersion adhesives (adhesive applied to carrier parts). Very large components are possible, with a forming area of up to 800 x 2,000 mm. The maximum forming height is 250 mm. Very fast cycle times of under 60 seconds are easily achievable. The system was regularly maintained and was operational until it was dismantled. Currently, the system is professionally stored at our facility in Hungary. We have locations worldwide and can provide direct on-site support at your plant. We can deliver this system worldwide as required, install it at your facility, train your staff, and assist you with all technical questions. Any type of modification or modernization is also possible. Contact us with your individual project requirements!

Stanje: dober (rabljeno), Varilni lok Iodpsxwlxwofx Adketd - Varilni lok: za varjenje plastike, iz stroja za izdelavo mask - Termoplošče/ventilacijske šobe: po 2 kosa - Mere: glejte fotografije - Količina: 3x lok na voljo - Cena: na kos - Dimenzije: 240/100/H55 mm - Teža: 0,7 kg/kos.

Stanje: skoraj kot novo (rabljeno), Termoformirni stroj Nerjaveče jeklo Isdpfxsxtp I Is Adketd Kompakten in enostaven za uporabo Do 100 shranjenih programov Do 10 ciklov na minuto 055 m³/h Moč: 9,5 kW Napetost: 400V / 50Hz / 3 faze

Stanje: rabljeno, Ta objava je namenjena za napravo Thermo Fisher Invitrogen E-Gel™ Power Snap Electrophoresis Device. Enota je popolnoma delujoča in pripravljena za takojšnjo uporabo. E-Gel™ Power Snap Electrophoresis Device je kompakten, vse-v-enem namizni sistem, ki poenostavi tako ločevanje kot vizualizacijo DNA v gelu. Sistem je zasnovan za hitro, varno in praktično elektroforezo ter združuje napajalnik, modro-svetlobni transiluminator in jantarni filter v eni napravi, zaradi česar je idealen za širok spekter analiz DNA. Ključne značilnosti: Ijdpfx Adjxv Az Tskjtd Poenostavljena elektroforeza in zajem slike: vse-v-enem sistem integrira tek gela in zajemanje slike. Hitro ločevanje: vzorce DNA lahko ločite v samo 10 minutah z uporabo suhih, že pripravljenih E-Gel™ agaroznih gelov. Vizualizacija v realnem času: integrirana modra svetloba in jantarni filter omogočata pregled in zajem vzorcev DNA, ko se le-ti ločujejo. Takojšnje zajemanje slike: priključena kamera E-Gel™ Power Snap omogoča visokoločljivo zajemanje slike gela brez potrebe po zunanjem napajanju ali povezavi z računalnikom. Prijazno za laboratorijsko mizo: majhna, hitra in zmogljiva naprava z izjemno kompaktno zasnovo omogoča učinkovito in priročno uporabo. Vnaprej programirani protokoli: vgrajeni postopki za vse združljive E-Gel™ agarozne gele za preprosto uporabo plug-and-play. Varna in enostavna uporaba: slikanje z modro svetlobo odpravlja nevarnosti, povezane z UV svetlobo.

Stanje: rabljeno, Dieses Angebot bezieht sich auf das Thermo Scientific Vanquish UHPLC-System. Das Gerät befindet sich in einwandfreiem, voll funktionsfähigem Zustand und ist sofort einsatzbereit. Übersicht: Thermo Scientific Vanquish UHPLC-Systeme 1. Autosampler Funktion: Automatische Probenaufgabe in den mobilen Phasenstrom. - Entnimmt Proben aus Vials, Mikrotiterplatten oder Röhrchen - Präzise Injektion (häufig im nL- bis µL-Bereich) Itedpoxhfkzsfx Adkod 2. Pumpenmodul Funktion: Fördert die mobile Phase (Lösungsmittel) mit hohem Druck durch das System. - Binäre Pumpe: Mischt zwei Lösungsmittel bei Hochdruck – ideal für schnelle Gradienten. - Quaternäre Pumpe: Mischt bis zu vier Lösungsmittel bei Niederdruck – flexibler, jedoch langsamere Gradientenerstellung. - Genaue Steuerung der Flussrate (z. B. 0,001–5,000 mL/min) - Ermöglicht Gradientenelution (zeitlich variable Lösungsmittelzusammensetzung) 3. Detektormodul (x2) Funktion: Erkennung und Messung von Analyten nach Elution aus der Trennsäule. - Diodenarraydetektor (DAD/UV-Vis): Standard; detektiert UV-absorbierende Verbindungen - Fluoreszenzdetektor: Für fluoreszierende Substanzen - Charged Aerosol Detector (CAD): Universelle Detektion nicht-UV-aktiver Substanzen - Brechungsindexdetektor: Für Zucker, Polymere - Massenspektrometer (MS): Hochsensitive, fortschrittliche Analytik Die Vanquish-Plattform von Thermo Fisher umfasst verschiedene Varianten, abgestimmt auf unterschiedliche analytische Anforderungen – von Routine-HPLC bis hin zu Hochdurchsatz- und Niedrigfluss-LC-MS-Anwendungen: - Vanquish Flex UHPLC: Flexible HPLC/UHPLC-Methodeentwicklung, Betriebsdruck bis 1.000 bar. Unterstützt binäre/quaternäre/dual Pumpen, Lösungsmittelüberwachung und optionales Touchscreen-Interface. - Vanquish Horizon UHPLC: Für maximale Performance – Ultrahochdruck bis 1.500 bar, ultraniedriges Gradienten-Totvolumen, biokompatible Fließwege und exzellente Retentionszeitstabilität sowie Detektorempfindlichkeit. - Vanquish Neo UHPLC: Für next-generation Niedrigfluss-LC‑MS (nano bis mikro) – hohe Empfindlichkeit und Robustheit. - Vanquish Analytical Purification LC: Für präzise Fraktionierung – Hochdruck (700–1.500 bar), bis 10 mL/min Durchfluss, integrierter Fraktionssammler, multimodale Detektion, fortschrittliche Automatisierung. Wesentliche Merkmale der Vanquish-Plattform: - Modulares Design: Auswahl und individuelle Kombination von Pumpen, Probengebern, Detektoren und Thermostatmodulen. Die meisten Modelle bieten biokompatible Fließwege und Viper-Fingertight-Fittings für werkzeuglose Montage bei minimalem Totvolumen. - Temperaturmanagement: Hochleistungsfähige Säulenfächer mit aktiver/passiver Erwärmung, Vorheizung und nachgeschalteter Säuhlenkühlung für minimale Reibungswärme und maximale Reproduzierbarkeit. - Detektionsoptionen: Diodenarray (mit LightPipe-Optik für höchste Sensitivität), Charged Aerosol Detector, Fluoreszenz, Multiwellenlängen-, Brechungsindex- und Massenspektrometrie-Detektion. - Softwareintegration: Vollständig kompatibel mit Chromeleon CDS (inkl. SII für nahtlose MS-Integration); Xcalibur und TraceFinder für LC-MS-Anwendungen. - MS-Anbindung: Direkte Integration zu Thermo-MS-Plattformen (Triple Quadrupole, Orbitrap) für empfindliche und präzise Massenanalysen. - Wirtschaftlichkeit: Thermo betont reduzierte ungeplante Wartungen, höhere Produktivität und Nachhaltigkeit durch CO₂-neutrale Produktion mit erneuerbaren Energien.

Stanje: rabljeno, Table size 900 x 460 mm X/Y/Z travel – 600/400/420 mm Spindle speed 20–4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Tool changer with 32 stations Quill movement in vertical head 75 mm Swivelling vertical head +/- 90° Itsdel Dvx Eopfx Adked Control: Heidenhain TNC 407 Equipped with: Machine vice 19 tool holders Coolant system

Stanje: rabljeno, Ta ponudba je za Thermo Scientific Heratherm IMH400-S inkubator Naprava je v popolnoma delujočem stanju in je pripravljena za takojšnjo uporabo. Pregled Heratherm IMH400-S je del linije Heratherm Advanced Protocol Security mikrobioloških/laboratorijskih inkubatorjev. Zasnovan je za zahtevne aplikacije, kjer sta pomembni tako temperaturna zmogljivost kot tudi varnost/zaščita vzorcev. Beseda "Security" v imenu označuje dodatne značilnosti, kot so zaklepna vrata, alarmi in visokotemperaturni dekontaminacijski cikel. ----- Ključne tehnične specifikacije ParameterVrednost / ObsegOpombe / PoudarkiNotranji volumen / kapacitetaPribl. 381 litrov (≈ 13,5 cu ft) Nekateri oglasi uporabljajo zaokroženo oznako "400 l" Zunanje dimenzije (Š × G × V)Pribl. 778 × 770 × 1.545 mm (30,6 × 30,3 × 60,8 in) Vključuje kolesa, ohišje itd. Temperaturno območjeOkolje +5 °C do 105 °C Možno za inkubacijo in sušilne programe Temperaturna stabilnost / enakomernost±0,2 °C (pri 37 °C) običajno Nekatere verzije navajajo ±0,1 °C v idealnih pogojih Konvekcija / pretok zrakaMehanska konvekcija; nastavljiva hitrost ventilatorja (običajno 10–100 %) Enakomerna porazdelitev temperature; uporabnik lahko prilagodi hitrost potrebam aplikacije Dekontaminacijski cikel140 °C za pribl. 6 ur Zmanjšanje kontaminacije mikroorganizmov; ni potrebno sneti vseh polic za avtoklaviranje Police vključene; do pribl. 39 možnih položajev Police so snemljive; razmak je nastavljiv Moč / elektrikaPribl. 1380 W Običajne verzije: 230 V, 50/60 Hz Itjdpoxzh H Ejfx Adkjd Teža / masaPribl. 144 kg Težka naprava – potreben trden pod in previdnost pri vgradnji

Leto izdelave: 2006, stanje: potreben popravila (rabljeno), Repak termoformirni stroj, tip: RE 25, številka stroja: 2500020, letnik: 2006, 220/240 V, 3 faze, 50 Hz, 12 kW, 30 A, matrica: (12x) 85 mm x 110 m Nadomestni deli na prodaj. Slika 1. Krmilnik, elektronski deli, orodje, vakuumska črpalka, deli okvirja ipd. Vključuje orodja različnih velikosti. V stanju, kot je prikazano na sliki. Formirni deli komplet 4000 EUR. Slike 2. Flender motor ZF48-M100LB4, 250 EUR slike 3. Busch vakuumska črpalka Wv1000B-001 KDFC, 1200 EUR, slika 4 Avtomatski 2-linijski tiskalnik etiket in nanesevalec, komplet. 1500 EUR. Slike 5. Rotacijski rezalnik, trda folija. 500 EUR slike 6. Itodpfju Hz Tdsx Adksd Odtokovni transporter 300 EUR, slika 8. Prodaja kot komplet za 4000 EUR, prodaja v obstoječem stanju. Komplet matričnih setov 2500 EUR. HMI in elektronski deli. Ostali deli.

Stanje: rabljeno, Naprodaj so Multivac orodja za oblikovanje in zapiranje, prikazana na slikah. Na voljo sta 2 kompleta, vsak za širino folije 420 mm. Multivac 19.200.1240.95. Velikost pladnja: 6x11 cm x 18 cm. Cena: 2000 EUR. Drugi ima velikost 9x11,5 cm x 11 cm, številka artikla 105793236, cena 2000 EUR. Ijdewth Uispfx Adketd

Stanje: dober (rabljeno), Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat - Manufacturer: Raychem, thermostat with temperature sensor Iedpfx Aench H Todkjtd - Type: TRDR - Temperature range: - 0–15°C / + 0–15°C - Dimensions: 160/105/H55 mm - Weight: 0.6 kg

Leto izdelave: 2007, stanje: rabljeno, Visokofrekvenčni varilni stroj THERMATOOL CFI 350 kW VF Iedpfoymadbsx Adkjtd Popolnoma servisiran leta 2025 s strani strokovnjakov podjetja Thermatool Tehnične specifikacije: Nazivna moč (izhodna moč): 350 kW Nazivna varilna frekvenca: 180–300 kHz Vhodna napetost: 380 V AC / 50 Hz Skupna instalirana moč: 525 kVA Izhodna moč: 350 kW Varilna frekvenca: 180–300 kHz Vhodna napetost: 380 V AC / 50 Hz Skupna instalirana moč: 525 kVA

Stanje: rabljeno, Leto izdelave: 2011, SMC Deutschland GmbH Temperirana kopel, vodno hlajenje, INR 244 713D Model: INR244713D Stanje: Rabljeno Ijdpfxex I Al Ee Adkjtd Tehnični podatki: Thermo-Con 220-230VAC 50/60Hz Splošno: Enota za uravnavanje temperature SMC Thermo-Con (TCU), iz ASML Yieldstar S-200B. Hlajenje / uravnavanje temperature (MCW/PCW) za optiko, elektroniko, senzoriko ASML 4022.639.27493

Leto izdelave: 2022, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 919-313-239-i, For sale is a used thermography camera including protective housing. FLIR A400, Image Streaming, 42° Serial Number: 91901277 Scope of delivery: - Cardboard packaging - Infrared camera with lens - Ethernet cable M12 to RJ45, 0.3m - Calibration certificate with login data ##### TOPA ML protective housing for FLIR A400/A500/A700 including 3" germanium window High protection class and chemical resistance: IP67 Robust construction made from anodised aluminium profile Vibration-resistant mounting with good heat dissipation Dimensions: 96 x 96 x 227 mm (W x H x L), without cable gland ##### Climate control unit for TOPA protective housing with temperature monitoring and emergency shutdown Free-standing unit with high-performance pump, fans and radiator for continuous monitoring of camera temperature and water flow with emergency shutdown in case of malfunction. Typically, the system allows camera operation at an ambient temperature from -50°C to 200°C. The distance between the camera and the climate unit must not exceed 20 metres. The height difference must not exceed 5.7 metres. Included in delivery are cables and hoses for a distance of up to 3 metres. Scope of delivery: - Water cooling module for mounting on TOPA protective housing - Climate unit - Power supply 12VDC, 40W for DIN rail mounting - 6m NBR hose (-20°C to +80°C continuous temperature) Iedpfjx Ifafox Adketd - 3m high-temperature cable with temperature sensor - 3m DC connection cable - 250ml coolant concentrate

Stanje: zelo dobro (rabljeno), RS-Simulators RS-Simulators ST2K 320/70D Water-cooled Thermal Shock Test System For sale is a high-performance thermal shock testing system, model ST2K 320/70D. This system is ideal for standard-compliant thermal shock testing in accordance with DIN EN 60068‑2‑14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic specimen basket transfer, this system offers the perfect solution for component, material, and reliability testing in industry, research, and quality assurance. Main Technical Data: Temperature Ranges Upper test chamber: +40 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Humidity Testing (optional) – Upper test chamber Temperature: +40 °C to +90 °C Relative humidity: 20% to 98% r.H. (±2–5%) Specimen Basket Transfer: Vertical movement, < 10 seconds transfer time Power Supply: Total rating: 16 kVA Current consumption: 32 A Main fuse: 3× 35 A slow-blow Power connection: 3× 400 V / N / PE / 50 Hz Main cable: 5× 16 mm² Water & Compressed Air Connections: Cooling water inlet: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Iedpfxswx Ip Dj Adketd Condensate drains: 2× G ½", 1× G ¼", non-pressurized Deionized water inlet: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & Weight: Specimen basket internal dimensions (Type ST2K 320) Internal: Width approx. 430 mm, Height approx. 470 mm, Depth approx. 700 mm External: Width approx. 1100 mm, Height approx. 2300 mm, Depth approx. 2300 mm Weight: approx. 1150 kg Other Technical Data Sound level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3,800, limit 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12,100, limit 0.68 kg/m³) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% r.H. For your safety as a buyer, please note the following: The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information excepted!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), Julabo Type: FP51-SL (v.2) Low-Temperature Thermostat for ultra-low temperatures below -50°C, with bath opening for internal and external temperature control Low-temperature circulating thermostats of the HighTech series equipped with HL or SL controllers feature powerful pressure and suction pumps. The units offer the full range of functions of the professional HighTech thermostat series. Technical Specifications for FP51-SL Dimensions and Volume Dimensions (W × D × H): 46 x 55 x 89 cm Filling volume: 7.5 ... 12 l Weight: 90 kg Pump connection thread: M16x1 external thread Temperature Values: Operating temperature range: -51 ... +200°C Temperature stability: ±0.05°C Setting resolution of temperature display: 0.01°C Temperature display resolution: 0.01°C Permitted ambient temperature: +5 ... +40°C Mains voltage: 400V/3PNPE/50Hz (16A CEE plug) (R507) Performance Data: Heating capacity: 3 kW Cooling capacity: +20°C: 2 kW, 0°C: 1.5 kW, -20°C: 1 kW, -40°C: 0.26 kW Refrigerant: R507 Global warming potential: 3985 Filling weight: 1030 g Carbon dioxide equivalent: 4.10455 t Pump capacity, flow rate: 22 ... 26 l/min Pump capacity, delivery pressure: 0.4 ... 0.7 bar Maximum suction capacity: 0.2 ... 0.4 bar Maximum viscosity: 70 cSt Current consumption: 16 A Electronics Interfaces: Profibus optional Pt100 external sensor connection: integrated Integrated programmer: 6x60 steps Temperature control: ICC Absolute temperature calibration: 3-point calibration Temperature display: VFD Temperature setting: Keypad Isdpfx Aoqazddjdkotd Voltage variants: 400V/3PNPE/50Hz (16A CEE plug) (R507) Condition: used Scope of delivery: (See image) (Specifications subject to change and possible errors in technical data!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic polymer to rectangular glass panels as part of a solar module production line. The polymer forms a seal to a second glass pane, which is applied in a subsequent production step. Feeding, application, and removal of the glass panels are carried out on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet numerous requirements with great precision. For this reason, only raw materials (glass, sealant) that conform to the specifications on the following pages should be processed. This helps ensure high-quality and safe production. Performance Data and Connection Values - Maximum transport speed: 18 m/min - Height of the glass running surface: 1100 mm - Height of the applied sealant bead: 0.5 to 1.2 mm - Maximum width of the applied sealant bead: 12.0 mm - Required constant pneumatic inlet pressure: 6.5 to 8.0 bar - Operating pneumatic pressure: 6.0 bar - Compressed air consumption (normal operation): 10 NL/min - Compressed air consumption (during drum change): 500 NL/min - Average energy consumption per hour: 10 kWh - Working temperature of sealant: 110°C to 130°C Environmental Conditions and Emissions - Minimum ambient temperature: +15°C - Maximum ambient temperature: +35°C - Maximum relative humidity: 75% - Sound level: less than 70 dB(A) Requirements for Sealant Drums Design: Material drum with lid D18 acc. to DIN 6644 – with foot (F1) and smooth outer surface (mantle version, smooth). - Capacity: 216 liters - Inner diameter: 571.5 mm - Height: 874 mm - Minimum wall thickness: 1.25 mm Processable Glass Panels Glass types: Processable are glass panels with smooth surfaces (float glass). Dimensions and Weights Smallest sizes – largest sizes – geometry - Length (LS): 1198 mm – 1200 mm - Width (BS): 498 mm – 600 mm - Thickness (DS): 1.8* mm – 5.0* mm Processable thermoplastic polymers are based on polyisobutylene (butyl). The polymer must be flowable at about 110°C to 130°C and exhibit a defined viscosity profile. Only materials that are proven in practical use and have been approved by the manufacturers of these substances as well as by Bystronic for your intended application should be used. For detailed product descriptions and information on handling, storage, and disposal of the polymer, please refer to the product and safety data sheets made available by the manufacturers. Dimensions of Gantry Robot with Glass Conveyor - Height x Width x Depth: 2800 x 1890 x 2735 mm - Weight of gantry robot: 850 kg - Weight of glass conveyor: 1400 kg Ijdsd N Erpopfx Adkjtd Dimensions of Drum Pumps - Height x Width x Depth: 3320 x 1060 x 1200 mm - Weight (without drum): 850 kg - Weight (with drum): 1100 kg - Height H for drum pump FP1: 4400 mm - Height H for drum pump FP2: 4000 mm Dimensions of Control Cabinet - Height x Width x Depth: 2200 x 1800 x 600 mm - Weight: 450 kg The applicator was operated with butyl material. Condition: used From test laboratory, mint condition, only a few operating hours for testing! Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications may change!) If you have further questions, we will be happy to answer them by phone.

Stanje: rabljeno, Julabo Model: PRESTO W80t Completely overhauled! Operating temperature range: -80 ... +250 °C Temperature stability: ±0.01 ... ±0.05 °C Heating capacity: 3.4 kW Pump capacity (flow rate): 0 ... 40 l/min Pump capacity (delivery pressure): 0.1 ... 1.7 bar Refrigerant Information Refrigerant: R507 R23 Filling quantity: 720 g 500 g Cooling water temperature range: 10 ... 15 °C Itodpfxsvwch Te Adksd Cooling water differential pressure: 1.5 ... 6 bar Cooling water consumption: 2 l/min Pt100 external sensor connection: integrated Second external Pt100 sensor connection: optional accessory Integrated programmer: 8x60 steps Temperature control: ICC Absolute temperature calibration: 3-point calibration Temperature display: 5.7" TFT touchscreen Temperature setting: touchscreen Overall dimensions (W × D × H): 43 x 65 x 126 cm Condition: used Weight approx. 170 kg Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), TA Instruments Type: TMA Q400 TMA Thermomechanical Analyzer Itjdpfx Adohukh Neked Performance: Temperature range (max.): -150 to 1,000 ˚C Temperature accuracy: ± 1 ˚C Furnace cooling time (air cooling)

Stanje: dober (rabljeno), Thermo Fisher Isdsry Ui Hepfx Adkstd ARCTIC A25 Technical Specifications: Controller Type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling Capacity: 500 W Flow Rate: 17 l/min Pump Type: Pressure pump, suction pump Temperature Range: -25°C to +100°C Max. Pressure: 300 mbar Temperature Stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal Length: 18.4 cm Width: 27.3 cm Internal Width: 17.3 cm Height: 71.1 cm Internal Depth: 20.4 cm Weight: 36.1 kg Electrical Requirements: 230 V, 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See pictures as shown) (Subject to modifications and errors in the technical data; all information is without guarantee!) For further questions please feel free to contact us by phone.

Stanje: dober (rabljeno), Julabo Type: FC 600 Technical Data for FC 600 Dimensions (W × D × H): 36 x 54 x 49 cm Weight: 48 kg Temperature Data: Operating temperature range: -20 ... +80°C Temperature stability: ±0.2°C Mains voltage: 230V/50Hz 7 A Performance Data: Heating capacity: 1.2 kW Cooling capacity: +20°C: 0.6 kW, 0°C: 0.34 kW, -10°C: 0.21 kW Refrigerant: R134a Global warming potential: 1430 Fill weight: 290 g Pump output flow rate: 20 l/min Pump output pressure: 0.5 bar Filling volume: 6 to 8 l Iodpfx Adsry Uifjkstd Condition: used Scope of delivery: (see picture) (Specifications subject to change. Errors and omissions excepted!) If you have any further questions, we will be happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1506, širina folije: 1.000 mm, vrsta vhodnega toka: trifazni, pritisk: 6 letvica, skupna širina: 700 mm, skupna dolžina: 1.000 mm, skupna višina: 350 mm, vhodna napetost: 400 V, najv. debelina pločevine: 10 mm, ogrevalna zmogljivost: 30 kW (40,79 KM), skupna masa: 1.500 kg, višina orodja: 490 mm, Tip stroja: ILLIG UA 100 G Isdpfx Adowfdd Dokjtd Številka stroja: 1506 Leto izdelave: 1988 Skupna teža: pribl. 1,5 t Napajanje: 3x400V Skupna poraba energije: 35 kWh Skupna moč ogrevanja (zgoraj in spodaj): 30 kWh Tip grelne plošče: keramična Največja velikost plošče: 1000x700 mm Najmanjša velikost plošče: 310x210 mm Največja debelina plošče (ročno nalaganje): 12 mm Največja površina oblikovanja: 960x660 mm Najmanjša površina oblikovanja: 270x170 mm Višina pozitivno oblikovanega izdelka: 350 mm Višina negativno oblikovanega izdelka: 350 mm Največja višina orodja: 490 mm Stroj je bil približno leta 2020 obnovljen. Vgrajen je bil nov krmilni sistem Omron, ki je zamenjal originalni Schleicher, prav tako pa smo obnovili ožičenje in električno omarico.

Stanje: dober (rabljeno), Thermal motor protection relays, relays, heater current monitoring, preheating for generators, contactor, solid-state contactor, contactor Itsdpfx Asb A Svyedkjd - 60–100 A, class 10 - Weight: 0.8 kg

Stanje: kot nova (razstavni stroj), obratovalne ure: 50 h, Uhlmann Thermoform Packaging System UPS 4 ETX for processing PVC forming film and aluminum lidding foil Base machine with modular technology and balcony design, consisting of 12 modules: - Forming film unwinding unit with 2 pneumatic expanding shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and splicing table for forming film - Intermittent forming film unwinding - 3-zone contact heater: - 6 heating circuits, individually controllable - simultaneous heating of at least 3 advances - heating plates open automatically when machine stops - Forming station with 4-column lift table guidance - Filling section, length 1,360 mm - Safety cover in filling area Lidding foil unwind on operator side with pneumatic expanding shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4-column lift table guidance: - integrated overload protection - automatic lifting of the upper sealing tool when machine stops - Free module for installation of an additional station - Indexing chain feeder - Punching station with blister lowering - Waste cutter with integrated motor-driven transport of the punching grid - Smoothing device - Perforation station ET/DT - Monitoring of compressed air supply with machine stop if minimum value is not reached - Visio Scan - electrically interlocked safety doors - Fast format change due to: - plug-in format parts - quick-connect couplings for cooling water supply - Main drive with frequency-controlled three-phase geared motor - Control cabinet at machine rear, swing-mounted Operating control Paccontrol - 10.4" TFT color display, resolution 640x480 pixels - Processor 68C030 - Operating system OS9 2.9 - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Programmable logic controller in modular design: - B&R PLC control Isdotndpzjpfx Adkotd - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - external program memory Technical Data UPS 4 ETX: - Cycles: - ET area: min./max.: 15/50 cycles/min. depending on film quality, feeding, and format design - Format range: min./max. advance in filling area: 64/226 mm min./max. film width: 100/300 mm min./max. punching width: 28/284 mm max. forming depth: 12 mm - Compressed air: - Input pressure: approx. 6 – 8 bar 4 Simtap feeders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: omejena funkcionalnost, Manufacturer: Breyer Extrusion Item: Die, 3-layer die 2300 mm 3-layer flat sheet die, 2,300 mm wide (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price: EUR 365,500 Total original price: EUR 444,200 Main technical data of the die: Total throughput: approx. 700 kg/h Designed for HDPE material Gross outlet width: 2,300 mm, adjustable via deckling Lip opening: 16 – max. 26 mm Heating: electric via heating cartridges 400 V / 50 Hz Die heating power: 137 kW Co-extrusion adapter heating power: 7.5 kW Comprises: - Die (main die body) with 3 channels Itedpfx Adjx A D Emoked - Co-extrusion adapter - Die body - Die lip body - Accessories / screws - Accessories for deckling and parts for co-extrusion adapter - Adjustment device accessories (Note: Photographs are from 2023) The die now shows signs of use and is stored dismantled. Heating system is included, but not installed. The die is located at 78224 Singen (Hohentwiel), Germany, with the manufacturer. Inspection is possible on site by appointment. Additional photos available on request. You are welcome to send us your price offer. Reasonable offers will be considered. For inquiries, please include your full contact details! Delivery may be possible for a fee. You are welcome to come and inspect the item on site. To do so, simply call and we will arrange an appointment. Small tip in advance: Become a 'FOLLOWER' of us here in the classifieds, so you will always see our current offers or new listings. The item originates from insolvency proceedings and therefore shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. The sale is made without any warranty. Liability, reduction, or withdrawal from sale are expressly excluded. Prior inspection is recommended, as the item is sold as inspected. All information and details are provided without guarantee. Errors and changes reserved. The item is sold as viewed on site, in used condition, with retention of title and excluding liability for visible and hidden defects, especially technical, quality-related or performance-related defects and usability. Due to time constraints, we will only respond to serious inquiries and price offers! This is an advertisement for information purposes only. Inspection only by appointment! Kind regards, Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. +49 152 31381635