Gmx 250 nakup rabljenega (10.884)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, Žaga Graule ZS 170, letnik 1996, 2200 EUR Rezkar Graule 6/250 - 160, letnik 2008, 2900 EUR Kedpfjwp Stzsx Af Nsll Vrtljivi zalogovnik za krila in okvirje, 500 EUR Valjčna proga 7,5 m kot zalogovnik za okna pred postajo za zastekljevanje, 600 EUR

Stanje: rabljeno, Technical details: Sheet width: 250 mm Sheet thickness: 2 mm Number of rollers: 11 Leveling speed: 5...30 m/min Infeed height: 1250 mm Total power requirement: 4.0 kW Machine weight approx.: 620 kg Machine dimensions: 1.15 x 1.02 x 1.5 m Switch cabinet dimensions (LxWxH): 0.66 x 0.53 x 0.32 m STRIP LEVELING LINE WITH FEEDER Features: - Lateral strip guiding rollers Kledpfxju Ic Ews Af Nol Design: - Strip infeed height, horizontal: 1250 mm - Tiltable: positive 30°; negative 15°

Stanje: rabljeno, Leto izdelave: 1979, Technical Details: Pressure: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250 x 800 x 100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900 x 670 x 100 mm Clearance between uprights: 500 x 400 mm Total power requirement: 23 kW Approx. machine weight: 16.6 t Machine dimensions: 2.8 x 1.4 x 3.7 m Control cabinet dimensions LxWxH: 1.15 x 0.6 x 2.1 m Kodpfju Nfinsx Af Nsll Drawing unit: Ejector force and blankholder force each 16 t Table fitted with 4 parallel T-slots (1250 x 800 x 100 mm) Ram plate fitted with 4 radial T-slots Accessories: - Steel plate 1170 x 860 x 80 mm

Stanje: rabljeno, Leto izdelave: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram clamping surface: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Kledpfeu Nfklsx Af Njl Table height above floor: 1000 mm Total power requirement: 23.0 kW Machine weight approx.: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Machine dimensions approx. (LxWxH): 3.0 x 1.3 x 3.3 m Further features: - Operation via two-hand control stand with foot pedal - 4 foot plates, Ø 220 mm

Stanje: rabljeno, Technical Details: Klodpfx Afou Ng Ifs Njl Grinding length: 450 mm Center height above table: 120 mm Grinding width: 200 mm Grinding spindle - swiveling: 350° Grinding spindle head adjustable: 15° right/left Grinding spindle head adjustment, vertical: 250 mm Spindle head adjustment, cross/transverse: 230 mm Spindle speeds: 2200/3500/5200 rpm Worktable (W x L): 120 x 950 mm Table movement, transverse: 220 mm Table movement, longitudinal: 500 mm Table tilting: 5° / 45° right / left Grinding wheel dimensions: Ø 120x15 mm Dimensions of hydraulic unit: 0.6 x 0.5 x 0.9 m Total power requirement: 1.8 kW Machine weight approx.: 1.2 t Machine dimensions approx. (L x W x H): 1.6 x 1.2 x 1.6 m Hydraulic unit dimensions: 600 x 550 x 820 mm The tool grinding machine is currently converted for use as a surface grinding machine. Scope of delivery: - Including Orsta-Hydraulik hydraulic unit - Including dust extraction - As well as various accessories as shown in the picture i.D.

Stanje: rabljeno, Leto izdelave: 2001, Technical Details: Kedpfx Afevbgr Ro Noll Grinding length: 2,500 mm Grinding width: 800 mm Workpiece height: 800 mm Table movement horizontal, longitudinal stroke: 2,700 mm Table movement horizontal, cross stroke: 800 mm Table speed: longitudinal: 1 - 35 m/min / cross: 0 - 3 m/min Feed rate: vertical: 0.001 mm/stroke / cross: 0.0025 mm/stroke Magnetic chuck size: 2,500 x 800 mm automatic grinding wheel infeed: 0.001 mm Distance table to spindle center: 900 mm Grinding spindle speed: n/a rpm Grinding wheel dimensions: 400 x 76 x 127 mm Total power consumption: 36 kW Machine weight approx.: 13.5 t Machine dimensions (LxWxH): approx. 7.5 x 2.8 x 2.7 m Cooling system dimensions (LxWxH): 1.8 x 1.0 x 0.92 m Hydraulic system dimensions: 1,900 x 800 x 1,500 mm Transport dimensions machine (LxWxH): 8.0 x 2.4 x 2.85 m The machine is currently located in the technical department! Equipment: - Currently mounted grinding wheel = Ø 340 x 81 mm - Hydraulic unit - Dressing device - Separated working area (2-sided sliding door) - Machine interior lighting Accessories: Various grinding wheels Ø 400; Ø 310; Ø 300 as well as Ø 200 mm Various magnetic inserts and filter cartridges

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: Measuring range X-axis: 280 mm Measuring range Y-axis: 300 mm Tool holder: SK 40 Tool holder: rotatable 360° Kjdpfxsva Atne Af Noll Compressed air: required, bar Power supply: 220 V Weight: approx. 70 kg Dimensions (LxWxH): 900 x 475 x 820 mm Application for rotary tools Measuring method: optical / point and line measurement (line, angle, radius, plumb, with center point and concentricity) Measuring beam adjustable via handwheel, X-axis = 140 mm and Z-axis = 300 mm, transmitted light LED illumination Color camera type HS-CAM 6, working distance 100 mm, outreach 55 mm Image processing system type TCAM3, fixed/floating crosshairs, via 12.1" screen, memory for 1000 tools Table support Ø 90 mm, outreach max. 225 mm, manually rotatable 360°, tool holder SK50:SK40 (see photo) Accessories: Power supply 12 V adapter 4x USB interfaces (label printer with power supply not connected) Tool holder SK50:HSK A63

Stanje: rabljeno, Technical details: Vertical rapid feed: Z-axis: 1,125 mm Horizontal travel: X-axis: 600 (+1,000 electrically/manual) mm Cross feed: Milling slide Y-axis: 325 (340) mm Control system: Siemens 840D Clamping surface diameter: 3,500/5,800 mm Turning diameter: max. 6,000 mm Rotational speed range, faceplate: 1–12 rpm Spindle speed (milling spindle): 1,000–6,000 rpm Max. workpiece diameter on pallets: 6,000 mm Workpiece weight: 10–2,000 kN Kedpfeu Idlfsx Af Nell Tool holder: HSK-A-100 Total power requirement: 120 kVA Machine weight approx.: 35 t VERTICAL RING AND CYLINDER MACHINING CENTER SPECIAL CNC MACHINING MACHINE Application: FOR TURNING, BORING, MILLING, AND GRINDING RING-SHAPED PARTS (large slewing bearings, slewing rings, gear rims, special flanges, and much more.) Machine structure: Two separate main units: Column unit and faceplate/table unit - Feed drives via AC servomotors - Cross movement of milling support Z-axis 325 (max. 340) mm - Faceplate drive power: 76 kW - Table positioning accuracy = 0.02 mm Renewed/Upgraded: - Axis motors replaced (Siemens) - Central lubrication for large slewing bearing of rotary table/spindle expanded - Partial machine rewiring - Accumulator and safety valve in progress.

Stanje: rabljeno, Technical Details: Diameter: 250 mm Kodpfsu Nk D Rjx Af Noll Machine weight approx.: 31 kg Speeds: 3504 rpm Three-jaw chuck - includes 3 sets of jaws each for external and internal clamping - without packaging

Stanje: rabljeno, Technical details: Pressure: 250 t Stroke: Continuous idle 40 mm Ram stroke: adjustable 36 - 126 mm Ram adjustability: 110 mm Ram clamping area: 630 x 500 mm (L x W) Clamping surface: 1000 x 750 x 100 mm Distance table / ram: 400-526 mm Passage opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Control cabinet dimensions (L x W x H): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (L x W x H): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator stand Accessories: Kledju N Ddwepfx Af Nsl - Base plate 2200 x 1500 x 40 mm

Stanje: rabljeno, Technical details: Grinding length: 300 mm Grinding spindle - rotatable: 350° Grinding spindle head adjustable: vertical: 250 mm Spindle head adjustment: crosswise: 230 mm Grinding spindle head adjustable: tiltable +/-15° Grinding diameter: Ø 250 mm Spindle speeds: 2200 - 3500 - 5200 rpm Work table: W: 120 x L: 950 mm Table movement: upper table swivable: right/left 45° Table movement: max. table travel: 500 manual mm Magnetic chuck surface: 305 x 130 x 100 mm Grinding wheel dimensions: cup wheel 125 x 20 Ø 32 mm Total power requirement: 1.8 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 1.6 x 1.3 x 1.7 m Hydraulic unit dimensions: 600 x 550 x 870 mm Kledou Ng Npepfx Af Njl Accessories: Universal clamping head Morse taper MK5 Drill bit grinding fixture Ø 10 mm

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Maximum pitch circle diameter: 360/24 mm Approx. machine weight: 46 kg Center height: 130 mm Swivelable: yes ° Rotational movement: 360 degrees Dimensions: 350 x 450 x 260 mm Klsdpfju Nlg Tex Af Nol Application: For auxiliary tasks, e.g. marking out divisions - Indexing device with chuck Ø 125 mm on a 360° pitch circle - Clamping is achieved via an indexing pawl/indexing plate - Pitch circle 24 - Chuck: Ø 125 mm, with circumferential scale; through-hole Ø 17 mm; without jaws - Base plate: size 260 x 300 mm, with 2 T-slots WxL: 15 x 21 mm - Chuck key - 2 T-slot nuts

Stanje: rabljeno, Technical details: Machine weight approx.: 160 kg Machine dimensions approx. LxWxH: 0.58 x 0.50 x 0.3 m Pivotable: no Rotary movement: 360 degrees Application: For auxiliary tasks, e.g., marking out of divisions - Dividing head with clamping chuck Ø 370mm with 4-jaw external clamping Kljdpfou N E Dxsx Af Nol - Pitch circle with 15/16/17/18/19/20360°; rotation 360° - 360° rotation via radial scale

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Cutting diameter: 120 mm Saw blade dimensions: 425 x 30 mm Cutting range at 90 degrees, round: 120 mm Height above floor: 800 mm Electrical connection: 380 V / Hz Strokes per minute: 60 / 92 / 140 strokes/min Ksdju Nilaepfx Af Njll Total power requirement: 1.5 kW Machine dimensions: approx. L: 1.2 x W: 0.75 x H: 1.10 (bow raised) m Vice adjustable longitudinally by loosening the nuts. Miter and straight cuts: 45° and 90° Equipped with cutting pressure and lift hydraulics After the cut is complete, the machine switches off and the saw blade remains in the lowest position. Workpiece holder with fixed jaw and clamping jaw, operated by handwheel Coolant system in the base Stop

Stanje: rabljeno, Leto izdelave: 1978, Tehnične podrobnosti: Nosilnost: 0,25 t Višina spodnjega roba iztegnjenega kraka: 3450 mm Dolžina iztegnjenega kraka od sredine stebra: 3000 mm Premer stebra: 194 mm Zasuk: pribl. 100° Na voljo so 3 kos stebrnih vrtljivih žerjavov za prodajo (cena na kos), lokacija Leipzig. 2 stebrna vrtljiva žerjava (št. 3 in št. 4) so obnovljena in delujoča, en stebrni vrtljivi žerjav (št. 5) je v stanju "kot je", brez obnove. Dvižni mehanizem Demag-PK2 N-F, 250 kg, hitrost dviga 10 m/min, počasni dvig 2,5 m/min, verižni enojni verižnik; glej tipsko tablico; upravljanje preko ročne viseče tipke, ročna vožnja. Ksdpfx Aou Szhpof Njll Pri stebrih št. 3 in 5 je osnovna plošča 580 x 580 x 20 mm, pri št. 4 pa 400 x 400 mm. Iztegnjen krak Steber i.D.

Stanje: rabljeno, Technical Details: Cartridge filter type: mechanical Air delivery rate: 1,330 m³/h Total power requirement: 40 kW Machine weight approx.: 300 kg Mobile extraction unit with wet separator - industrial extraction system Application: For combustible dusts (for aluminum and magnesium dusts); EX-protected Design: Sheet steel housing Dust cartridge: dust class M 10 m² and dust class H 10 m² Kjdsu Nv A Eepfx Af Noll Deduster: - Size Ø 580 x 1,000 mm - Pipe connection Ø 160 x 60 mm - Mechanical filter Dust container: - Size Ø 580 x 550 mm - With 4 swivel casters (Ø 100 x 36 mm) Water separator: - With 2" drain valve with manual lever - Max. capacity 75 liters

Stanje: rabljeno, Leto izdelave: 1996, Technical details: Cutting capacity in steel up to: 25 mm Amperage: 2 x 120 A (2 units available) Plasma cutting system with possible welding processes: - Plasma cutting, gouging; TIG welding (on all metals and alloys); MIG welding on light metals, alloys, heavy metals, as well as arc welding Description: - Power source: Nertajet HP 120 (220V, 24V, 380V, 415V, 440V, 500V) multiple frequencies 50/60Hz (2 units available / price per unit) Kodeu Nwxnspfx Af Nsll - Torch: CPM 250 (flat electrode) - 1 unit available In good condition.

Leto izdelave: 2016, Stanje: rabljeno, Technical Details: Wheelbase: 950 mm Load capacity: 25,000 kg Lifting height: 1,310 mm Own weight: 2,100 kg Dimensions (LxWxH): 1.7 x 2.0 x 0.75 m Total power requirement: 11.2 kW WHEELSET CHANGING SYSTEM - WHEELSET PIT Application: Changing of wheelsets and drive axles for railway requirements (locomotives, freight cars, etc.) 2 speed levels forward/reverse 2 speed levels for lifting approx. 60 sec./lowering approx. 110 sec., operation via hand-held controller Lateral shift left/right +/- 20 mm Hoisting category 5 Emergency stop Platform: L: 1,420 x W: 657 mm, usable stroke 1,050 mm Operating pressure for hydraulics = 185 bar Chassis speed = 2-stage minimum 18 mm/sec. Klodpfx Aex Ac R Uef Njl Axle spacing: 950 mm Equipment: 10 m connection cable with 380 V

Stanje: rabljeno, Technical details: Kodpfsu Nurxjx Af Noll Mounting diameter: 310 mm Weight: 216 kg Dimensions (L x W x H): 0.5 x 0.2 x 0.9 m Connecting rod for mechanical press PEE 250 Trapezoidal thread Ø 146 x 14 mm

Stanje: rabljeno, Tehnične podrobnosti: Z-hod: 1250 mm Premer vrtenja nad ležiščem: 260 mm Premer obdelovanca nad ležiščem: 500 mm Klsdsv U Un Hepfx Af Nsl Premer obdelovanca nad suportom: 250 mm Višina konice nad ležiščem: 260 mm Dolžina rezkanja: 2000 mm Maks. modul: 8 / 12 Skupna potrebna moč: 9,5 kW Približna teža stroja: 3,8 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, potovalna razdalja osi X: 300 mm, pomik po osi Z: 740 mm, največja hitrost vretena: 5.000 obr/min, skupna višina: 3.900 mm, skupna masa: 14.000 kg, največja dolžina izdelka: 3.100 mm, število osi: 2, Splošni podatki Teža stroja: 14.000 kg Višina stroja: 3.900 mm Premiki Ksdpjx Imr Ajfx Af Nell Pomik osi X: 300 mm Pomik osi Z: 740 mm Glavni pogon Število osi: 2 Hitrost vretena: 5.000 min⁻¹ (obr/min) Dimenzije Dolžina stroja: 3.100 mm Ta EMAG VTC 250 Twin je bil izdelan leta 2015. Gre za robusten vertikalni stružni stroj z osnovo iz MINERALIT-a, namenjen obdelavi obdelovancev do premera 140 mm in dolžine 630 mm, z maso do 20 kg. Opremljen je z EMAG pick-up sistemom in dvema revolverskima glava z 11 mesti za orodja na vsaki. Največja hitrost vretena je 5.000 obr/min, poganja jo agregat z močjo 29 kW. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Struženje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Glavni pogon Število osi: 2 Pomik Pomik po osi X: 300 mm Pomik po osi Z: 740 mm Stroj EMAG VTC 250 je bil izdelan leta 2013. Ima premer vpenjalne glave 250 mm in lahko obdeluje obdelovance s premerom do 140 mm. Stroj omogoča pomik po osi X 300 mm in po osi Z 740 mm. Izkoristite priložnost za nakup tega vertikalnega stružnega stroja EMAG VTC 250. Za več informacij nas kontaktirajte. Kljdsx Imtmopfx Af Nsl Vrste uporabe Struženje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Glavni pogon Število osi: 2 Ta EMAG VTC 250 je bil izdelan leta 2015. Gre za vertikalni stružni stroj s premerom vpenjalne glave 250 mm in največjim premerom obdelovanca 140 mm. Hodi osi znašajo 300 mm v osi X in 740 mm v osi Z. Razmislite o nakupu tega vertikalnega stružnega stroja EMAG VTC 250. Za več informacij nas kontaktirajte. Vrste uporabe: Struženje Ksdsx Imtgspfx Af Noll

Stanje: pripravljen za uporabo (rabljen), moč: 28 kW (38,07 KM), vrsta goriva: dizel, lastna masa: 4.800 kg, Leto izdelave: 2009, obratovalne ure: 7.950 h, Oprema: dodatne luči, hidravlično kladivo, kabina, nastavljiva roka, Opis vozila Mini bager / Midi bager / Gosenicarski bager TAKEUCHI TB 250 Leto izdelave: 2009 Po števcu: 7.950 ur 4.800 kg 28,4 kW - POWERTILT - hidravlična hitra menjava - vse cevi - 3 žlice - takoj pripravljen za uporabo - dobre gosenice - redno servisiran stroj Prodajna cena: 29.900,-- neto Kedpfx Afjxz E His Nell Možna tudi ugodna dostava!

Stanje: zelo dobro (rabljeno), Thermo Scientific Heratherm Thermo Scientific Heratherm OMS180 Forced-Air Drying Oven – 250 °C Item description: For sale is a Thermo Scientific Heratherm OMS180 forced-air drying oven. This device was previously used in a laboratory, and is in good used condition. Kjdpox Uxz Ajfx Af Nell Heating, recirculating fan, and controls function properly. Suitable for laboratory, industrial applications, training, research, material and sample drying. Technical data: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Max. temperature: 250 °C Temperature control: Digital Chamber material: Stainless steel Forced-air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Dimensions & Weight: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.