Gkt 60 nakup rabljenega (21.735)

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 4.990 kg, dvižna višina: 6.060 mm, skupna dolžina: 3.980 mm, - Operation: Seated - Load centre distance: 525 mm - Axle load with load front/rear: 11,475/1,283 kg - Axle load without load front/rear: 3,814/3,954 kg - Tyres: Superelastic - Track width front/rear: 1,104/932 mm - Mast tilt (forward/backward) α/β: 7/5° - Seat height based on SIP (low version): 1,342 mm - Aisle width with 1000 x 1200 mm pallet (across): 4,370 mm - Aisle width with 800 x 1200 mm pallet (lengthwise): 4,570 mm - Turning radius: 2,645 mm - Minimum pivot point distance: 729 mm - Travel speed with load: 20 km/h - Travel speed without load: 20 km/h - Lifting speed (Plus//Standard-Performance) with load: 0.39/0.31 m/s - Lifting speed without load: 0.45 m/s - Lowering speed with load: 0.5 m/s - Lowering speed without load: 0.5 m/s - Traction force with load: 6,750 N - Traction force without load: 7,430 N Bodpfxsyb Tm Eo Abhecu - Max. traction force (Plus//Standard-Performance) with load: 22,590/19,000 N - Max. traction force (Plus//Standard-Performance) without load: 22,560/19,090 N - Gradeability with load: 8.9% - Gradeability without load: 15.5% - Max. gradeability (Plus//Standard-Performance) with load: 20.4/13.8% - Max. gradeability (Plus//Standard-Performance) without load: 27.5/27.5% - Acceleration time 15 m (Plus//Standard-Performance) with load: 6.3/7.4 s - Acceleration time 15 m (Plus//Standard-Performance) without load: 5.7/6.2 s - Service brake: Hydraulically actuated wet disc brake - Battery voltage: 80 V - Handling performance (Plus//Standard-Performance): 324/315 t/h - Working pressure for attachments: 250 bar - Oil flow for attachments: 50 l/min - Sound pressure level (operator’s position): 66 dB(A) - Human vibration: Acceleration per EN 13059: 0.42 m/s² - Trailer coupling type: Pin

Stanje: rabljeno, Leto izdelave: 2015, nosilnost: 3.000 kg, dvižna višina: 3.710 mm, skupna dolžina: 4.920 mm, - Type of equipment: Electric - Operation: Seated - Load capacity: 3.0 t - Load center: 500 mm - Load distance: 440 mm Bcsdpfoyb Tmrex Abhsu - Wheelbase: 1650 mm - Front axle load with load: 7290 mm - Rear axle load with load: 861 mm - Front axle load without load: 2581 mm - Rear axle load without load: 2570 mm - Tyres: Superelastic - Track width front: 950 mm - Track width rear: 900 mm - Mast/carriage tilt forward: 3° - Mast/carriage tilt back: 9° - Seat/standing height (SRP): 1141 mm - Coupling height: 487/367 mm - Aisle width with 1000 x 1200 mm pallet, crosswise: 3735 mm - Aisle width with 800 x 1200 mm pallet, lengthwise: 3935 mm - Turning radius: 2095 mm - Minimum pivot point: 570 mm - Travel speed with load: 19 km/h - Travel speed without load: 20 km/h - Lifting speed with load: 0.40 m/s - Lifting speed without load: 0.55 m/s - Lowering speed with load: 0.52 m/s - Lowering speed without load: 0.45 m/s - Drawbar pull with load: 7680 N - Drawbar pull without load: 8040 N - Max. drawbar pull with load: 17050 N - Max. drawbar pull without load: 17240 N - Gradeability with load: 18.1 % - Gradeability without load: 29 % - Max. gradeability with load: 21.7 % - Max. gradeability without load: 29.0 % - Acceleration time with load: 4.7 sec - Acceleration time without load: 4.2 sec - Service brake: electric/mechanical - Drive motor, rated performance S2 60 min: 15 kW - Lift motor, rated output at 15% duty cycle: 16.3 kW - Battery voltage: 80 V - Working pressure for attachments: 250 bar - Oil volume for attachments: l/min - Trailer coupling, type: DIN pin

Stanje: rabljeno, Leto izdelave: 2020, nosilnost: 3.000 kg, dvižna višina: 4.970 mm, skupna dolžina: 3.660 mm, - Type of equipment: Electric - Operation: Seated - Load capacity: 3.0 t - Load center: 500 mm - Load distance: 440 mm Bcedpfxeyb Tmlj Abhsu - Wheelbase: 1650 mm - Front axle load with load: 7290 mm - Rear axle load with load: 861 mm - Front axle load without load: 2581 mm - Rear axle load without load: 2570 mm - Tyres: Superelastic - Track width front: 950 mm - Track width rear: 900 mm - Mast/carriage tilt forward: 3° - Mast/carriage tilt back: 9° - Seat/standing height (SRP): 1141 mm - Coupling height: 487/367 mm - Aisle width with 1000 x 1200 mm pallet, crosswise: 3735 mm - Aisle width with 800 x 1200 mm pallet, lengthwise: 3935 mm - Turning radius: 2095 mm - Minimum pivot point: 570 mm - Travel speed with load: 19 km/h - Travel speed without load: 20 km/h - Lifting speed with load: 0.40 m/s - Lifting speed without load: 0.55 m/s - Lowering speed with load: 0.52 m/s - Lowering speed without load: 0.45 m/s - Drawbar pull with load: 7680 N - Drawbar pull without load: 8040 N - Max. drawbar pull with load: 17050 N - Max. drawbar pull without load: 17240 N - Gradeability with load: 18.1 % - Gradeability without load: 29 % - Max. gradeability with load: 21.7 % - Max. gradeability without load: 29.0 % - Acceleration time with load: 4.7 sec - Acceleration time without load: 4.2 sec - Service brake: electric/mechanical - Drive motor, rated performance S2 60 min: 15 kW - Lift motor, rated output at 15% duty cycle: 16.3 kW - Battery voltage: 80 V - Working pressure for attachments: 250 bar - Oil volume for attachments: l/min - Trailer coupling, type: DIN pin

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 3.500 kg, dvižna višina: 6.700 mm, skupna dolžina: 4.850 mm, - Operation: Seated Operator - Load Capacity: 3,500 kg - Load Center Distance: 500 mm - Load Distance: 468 mm - Axle Load with Load (front/rear) kg: 8,042 / 958 - Axle Load without Load (front/rear) kg: 2,662 / 2,838 - Track Width (front/rear) mm: 1,002 / 900 - Mast/Fork Carriage Tilt (forward/backward) °: 7 / 7 - Aisle Width with 1,000 x 1,200 mm Pallet (across) mm: 3,941 - Aisle Width with 800 x 1,200 mm Pallet (lengthwise) mm: 4,141 - Turning Radius: 2,273 mm - Minimum Pivot Turning Distance: 649 mm - Travel Speed (Blue-Q/Standard/Sprint) with Load km/h: 18 / 18 / 20 - Travel Speed (Blue-Q/Standard/Sprint) without Load km/h: 18 / 18 / 21 - Lift Speed (Plus* / Standard Performance) with Load m/s: 0.53 / 0.44 - Lift Speed (Plus* / Standard Performance) without Load m/s: 0.57 / 0.51 - Lowering Speed with Load m/s: 0.50 - Lowering Speed without Load m/s: 0.43 - Tractive Force (Plus* / Standard Performance) with Load N: 10,300 / 7,590 - Tractive Force (Plus* / Standard Performance) without Load N: 10,650 / 8,015 - Max. Tractive Force (Plus* / Standard Performance) with Load N: 20,900 / 16,920 - Max. Tractive Force (Plus* / Standard Performance) without Load N: 20,290 / 17,170 - Gradeability (Plus* / Standard Performance) with Load %: 17.8 / 12.9 - Gradeability (Plus* / Standard Performance) without Load %: 28.2 / 21.9 - Max. Gradeability (Plus* / Standard Performance) with Load %: 24.2 / 20.6 - Max. Gradeability (Plus* / Standard Performance) without Load %: 24.82 / 28.2 - Acceleration Time 15 m (Plus* / Standard Performance) with Load s: 5.7 / 6.3 - Acceleration Time 15 m (Plus* / Standard Performance) without Load s: 5.0 / 5.4 - Service Brake: Hydraulically operated wet disc brake - Handling Capacity (Plus* / Standard Performance) t/h: 258 / 245 - Energy Consumption at Handling Capacity (Plus* / Standard Performance) kWh/h: 8.6 / 8.0 - Working Pressure for Attachments bar: 250 - Oil Flow for Attachments l/min: 55 - Sound Pressure Level LpAZ (Operator's Seat) dB(A): 70 - Human Vibration: Acceleration according to EN 13059 m/s²: 0.57 - Trailer Coupling, Design/Type: DIN Pin - Integrated storage compartments and cup holders - Display and control unit with screen, function keys, and menu navigation (splash-proof) - MSG 65 Grammer seat with synthetic leather cover - Grab handle on overhead guard, front and rear - Multi-lever control - 3 fixed and 2 freely configurable drive programs, Blue-Q economy mode, sprint mode for maximum handling performance at the press of a button - Display of energy consumption and remaining travel time based on current battery charge status - Lithium-ion battery 1:1 exchangeable - Automatic parking brake - Curve Speed Control - Intelligent seatbelt monitoring with logic check Bedpjxd E Dtefx Abhscu

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 3.500 kg, dvižna višina: 4.660 mm, skupna dolžina: 3.870 mm, - Operation: Seated Operator - Load Capacity: 3,500 kg - Load Center Distance: 500 mm - Load Distance: 468 mm - Axle Load with Load (front/rear) kg: 8,042 / 958 - Axle Load without Load (front/rear) kg: 2,662 / 2,838 - Track Width (front/rear) mm: 1,002 / 900 - Mast/Fork Carriage Tilt (forward/backward) °: 7 / 7 - Aisle Width with 1,000 x 1,200 mm Pallet (across) mm: 3,941 - Aisle Width with 800 x 1,200 mm Pallet (lengthwise) mm: 4,141 - Turning Radius: 2,273 mm - Minimum Pivot Turning Distance: 649 mm - Travel Speed (Blue-Q/Standard/Sprint) with Load km/h: 18 / 18 / 20 - Travel Speed (Blue-Q/Standard/Sprint) without Load km/h: 18 / 18 / 21 - Lift Speed (Plus* / Standard Performance) with Load m/s: 0.53 / 0.44 - Lift Speed (Plus* / Standard Performance) without Load m/s: 0.57 / 0.51 - Lowering Speed with Load m/s: 0.50 - Lowering Speed without Load m/s: 0.43 - Tractive Force (Plus* / Standard Performance) with Load N: 10,300 / 7,590 - Tractive Force (Plus* / Standard Performance) without Load N: 10,650 / 8,015 - Max. Tractive Force (Plus* / Standard Performance) with Load N: 20,900 / 16,920 - Max. Tractive Force (Plus* / Standard Performance) without Load N: 20,290 / 17,170 - Gradeability (Plus* / Standard Performance) with Load %: 17.8 / 12.9 - Gradeability (Plus* / Standard Performance) without Load %: 28.2 / 21.9 - Max. Gradeability (Plus* / Standard Performance) with Load %: 24.2 / 20.6 - Max. Gradeability (Plus* / Standard Performance) without Load %: 24.82 / 28.2 - Acceleration Time 15 m (Plus* / Standard Performance) with Load s: 5.7 / 6.3 - Acceleration Time 15 m (Plus* / Standard Performance) without Load s: 5.0 / 5.4 - Service Brake: Hydraulically operated wet disc brake - Handling Capacity (Plus* / Standard Performance) t/h: 258 / 245 - Energy Consumption at Handling Capacity (Plus* / Standard Performance) kWh/h: 8.6 / 8.0 Bcodpfeyb Tlbex Abhsu - Working Pressure for Attachments bar: 250 - Oil Flow for Attachments l/min: 55 - Sound Pressure Level LpAZ (Operator's Seat) dB(A): 70 - Human Vibration: Acceleration according to EN 13059 m/s²: 0.57 - Trailer Coupling, Design/Type: DIN Pin - Integrated storage compartments and cup holders - Display and control unit with screen, function keys, and menu navigation (splash-proof) - MSG 65 Grammer seat with synthetic leather cover - Grab handle on overhead guard, front and rear - Multi-lever control - 3 fixed and 2 freely configurable drive programs, Blue-Q economy mode, sprint mode for maximum handling performance at the press of a button - Display of energy consumption and remaining travel time based on current battery charge status - Lithium-ion battery 1:1 exchangeable - Automatic parking brake - Curve Speed Control - Intelligent seatbelt monitoring with logic check

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 227 kg, lastna masa: 7.756 kg, gradbena višina: 2.540 mm, skupna dolžina: 8.150 mm, doseg roke: 11.150 mm, gradbena širina: 2.490 mm, delovna višina: 20.160 mm, Sklepna teleskopska dvižna ploščad Bodjyafbrjpfx Abhocu Hitrostni razred: 6,44 Tehnično stanje: Novo Stanje baterije: Novo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 533 h, nosilnost: 300 kg, Teleskopska dvižna delovna ploščad Bcodpfx Aoyafblsbheu Hitrostni razred: 4,82 Tehnično stanje: dobro Stanje baterije: dobro

Stanje: novo, Spiralni mešalec za testo Prostornina posode (kapaciteta): 60 litrov Spiralni mešalci so namenjeni profesionalni uporabi na področju pekarstva in gostinstva. Uporabljajo se za pripravo osnovnega testa, lahko pa jih uporabimo tudi za pripravo drugih vrst izdelkov, kjer mehanski sistem nadomesti ročno delo. Bcodpfxjx U Efbe Abhou Na ta način je mogoče neprekinjeno proizvajati večje količine testa. Sestavljeni so iz posode za sestavine in mešalnega orodja (spirala). Imajo digitalno upravljalno ploščo z zaslonom, dva neodvisna električna motorja z dvema hitrostma in nasprotnima smerema, ki premikata posodo in spiralo, ter vgrajen časovnik. Specifikacija spiralnega mešalca - enofazni: Prostornina posode: 60 litrov Električna moč: 3kW Dimenzije stroja: 840x480x1000mm

Stanje: novo, Leto izdelave: 2014, Zasukan izbočnik žerjava izbočnik s sistemom ZYBA-MAT Proizvajalec: Strödter Bcjdpjgu Dkyefx Abhsu Tip: ZP 60 / SAZ 60 D1 Leto izdelave: 2014 Novo in neuporabljeno Nosilnost največja dovoljena teža: 25 kg Delovni radij približno: 3.000 mm Maksimalna višina dviga: 800 mm Maksimalna hitrost dviga: cca 800 mm/s Napajanje: pnevmatsko Način pritrditve: Zasukan izbočnik s samostoječim stebrom Lastna teža naprave (s sredstvom za prijem tovora): 287 kg Pnevmatski delovni tlak: 6 bar Kakovost zraka potrebna za največjo nosilnost: čist, suh in filtriran (5 μm) Poraba zraka max.: cca 17 Nl/dvojni dvig ZYBA-MAT na zasukanem izbočniku Pnevmatski balansirni nadzor z avtomatsko tehtnico 21126ä

Stanje: rabljeno, Leto izdelave: 1979, Press force: 60 t Column distance: 650 mm Stroke: 220 mm Distance table/ram, max. stroke at top, adjustment at top: 410 mm Table surface: 600 x 525 mm Blankholder force in table: 5 t Blankholder stroke in table: 80 mm Table height above floor: 900 mm Lateral frame opening: 200 mm Ram surface: 560 x 490 mm Bedpfovuk Nmsx Abhscu Required space (WxDxH): 1.9 x 1.3 x 2.7 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, light curtain (Sick FGS 600), hydraulic blankholder in table, two-hand and foot operation No foundation pit required Can be offered in its current condition, either as-is or ready for operation

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 480 h, nosilnost: 5.000 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.340 mm, dolžina vilic: 2.400 mm, lastna masa: 7.643 kg, skupna dolžina: 2.600 mm, vrsta pogona: Elektro, gradbena širina: 1.400 mm, Električni štirikolesni viličar Širina vilic: 130 mm Debelina vilic: 60 mm ISO razred: ISO razred 4 = 5.000 - 10.000 kg Tip droga: Triplex Tehnično stanje: zelo dobro Sprednje pnevmatike, tip: Non Marking Sprednje pnevmatike, stanje: 80 - 100% Zadnje pnevmatike, tip: Non Marking Zadnje pnevmatike, stanje: 80 - 100% Baterija, napetost: 80V Baterija, kapaciteta: 930Ah Proizvajalec baterije: Still Leto izdelave baterije: 2019 Bcodpfx Asydr Hijbhsu Stanje baterije: 80 - 100% Bočni pomik, nastavljive vilice, 3. ventil, 4. ventil,

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 630 mm, pomik osi Y: 800 mm, pomik po osi Z: 650 mm, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik 840 D, največja hitrost vrtenja: 18.000 obr/min, skupna masa: 14.000 kg, največja hitrost vretena: 18.000 obr/min, dovod hladilne tekočine: 70 letvica, število vreten: 1, število mest v zalogovniku orodij: 180, Horizontalni obdelovalni center DECKEL MAHO DMC 60 H Linear z dvojnim menjalcem palet in 180 mesti v magazinu Letnik: 2009 Krmiljenje: Sinumerik 840D Bodpfxex Dlgns Abhocu Tehnični podatki: Hitrost glavnega vretena: 0-18.000 min-1 Pogonska moč: 35 kW Navor: Vretenovo vpenjanje: HSK 63 Število mest v magazinu: 180 kosov Število palet: 2 Velikost palete: 500x500 mm Pomiki: X-os: 630 mm Y-os: 800 mm Z-os: 650 mm C-os: 0,001° Vse osi imajo linearne pogone Dodatna oprema: - Sistem za hlajenje - Transporter za ostružke Stroj je bil redno vzdrževan. Še vedno zelo natančen! Dodatne slike sledijo. Video na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 640, skupna višina: 2.700 mm, skupna masa: 9.600 kg, največja hitrost vretena: 20.000 obr/min, največja dolžina izdelka: 3.000 mm, število osi: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, spindle speed of 20,000 rpm, and a 120-position tool changer. The machine is equipped with a chip conveyor, coolant system, and internal coolant supply at 40 bar. It is ideally suited for high-precision machining tasks. Take the opportunity to purchase this DMG MORI DMU 60 EVO vertical machining center. Contact us for further information about this machine. • CNC tilting rotary table • Tool changer: yes, chain-type magazine with 120 positions (120-fold) • Coolant: internal/external; internal coolant supply at 40 bar / 6001; extended chip flush; rinsing pistol; spindle center air blast • Rotating safety window • Electronic handwheel • Screen display: German/English • Required floor space: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe Bjdpfx Aoydp Iwebhjcu • Tool breakage control TRS2 • 4-color signal light • Extended M65 interface for Erowa Job Management System • Preparation for EROWA handling system (Operation mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 250 h, Funkcionalnost: popolnoma funkcionalen, Control: NCT 201/15” touch screen + USB (Windows-based) Max. swing diameter over bed: 590 mm Max. swing diameter over cross slide: 340 mm Max. turning diameter: 300 mm Centre distance: 300 mm Chuck diameter: 8" Guideway type: Linear Travel paths X / Z / Y / W: 160 / 455 / - / 325 mm Rapid traverse speed X / Z / Y / W axis: 24 / 30 / - / 24 m/min MAIN SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-6 Spindle bore: D75 mm Bar capacity: max. D60 mm Drive: Belt Number of ranges: 1 Motor power: 15 kW Cooling: Air SUB SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-5 Motor power: 6.9 kW Drive: Belt TOOLS: Tool changer: Tool stations: 12 Tool system: VDI30 Number of driven tool positions: 12 Max. driven tool speed: 4000 rpm DIMENSIONS: Footprint x Height: 2693 x 1810 x 1950 mm Net weight: 4230 kg BAR FEEDER: Type: BF1500 / DH65-LN Max. bar length: 1500 mm Max. bar diameter: D65 mm Weight approx. 333 kg Bcedpfxjx R Smko Abheu Equipment, accessories: - Chip conveyor - Coolant system - Bar feeder - Discharge conveyor for finished parts - Sub spindle - C axis + driven tool turret - Tool holders - Manuals - CE marking - Foot pedals The machine has barely been used. It is powered up in Western Hungary and is available for inspection.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, vpenjalna sila: 800 kN, premer vijaka: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. It is a vertical injection molding machine that offers a reliable solution for precision molding applications. Take advantage of the opportunity to purchase this Engel Insert 200V/60 rotary vertical injection molding machine. Contact us for further information. Screw diameter: 25 mm. 1.) Clamping Unit Clamping force: 600 kN Opening stroke: 338 mm Ejector stroke: 105 mm Ejector force: 20.1 kN 2.) Drive: Drive power of pump: 15 kW 3.) Injection Unit 1 Screw diameter: 22 mm 25 mm 30 mm 35 mm Max. shot volume: 53 cm³ (22 mm) 69 cm³ (25 mm) 99 cm³ (30 mm) 135 cm³ (35 mm) Max. screw speed: 480 rpm (for all diameters) Current screw speed: 480 rpm (for all diameters) Injection volume: 80 cm³/s (22 mm) 104 cm³/s (25 mm) 149 cm³/s (30 mm) 203 cm³/s (35 mm) Increased injection rate: 53 cm³/s (22 mm) 68 cm³/s (25 mm) 98 cm³/s (30 mm) 134 cm³/s (35 mm) Specific injection pressure: 2221 bar (22 mm) 2090 bar (25 mm) Bcjdpfx Absx D H Awohou 1451 bar (30 mm) 1066 bar (35 mm) Increased specific injection pressure: 2402 bar (22 mm) 2404 bar (25 mm) 2205 bar (30 mm) 1620 bar (35 mm) Nozzle stroke: 530 mm Nozzle contact force: 28.3 kN

Stanje: rabljeno, Kuter Bjdpfexrt Naex Abhjcu Proizvajalec: Baader Nerjaveče jeklo Kapaciteta: 60 litrov 6 nožev

Stanje: zelo dobro (rabljeno), Proizvajalec: ARBURG Model: Allrounder 270-S-500-60 Leto izdelave: 1998 Serijska številka: 173062 Krmilni sistem: Arburg Selogica Bcedox Eiq Hjpfx Abhju Premer polža: 18 mm

Stanje: zelo dobro (rabljeno), Proizvajalec: ARBURG Model: Allrounder 270S-500-60 Leto izdelave: 1997 Serijska številka: 170175 Krmilni sistem: Arburg Selogica Bcedpsx Eiq Tsfx Abheu Zapiralna sila: 500 kN Premer polža: 15 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 61.469 h, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world’s first automated bending cell featuring integrated image recognition for maximum flexibility. Suitable for sheet metal parts up to 40 kg, this system incorporates a 6-axis backgauge sensor system. Outstanding repeatability is ensured by angle measurement sensors (ACB) in automated operation. The machine features a robust all-steel frame, electro-hydraulic top drive, and modern block hydraulic system. It is equipped with TRUMPF TASC 6000 control, including a 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending tasks. Contact us for further information on this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearings and angle adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Low-profile front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil within machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge/stop • Backgauge system • Rear backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable • Remote diagnostics via modem Bcedox Imqlspfx Abhou • Operation • Operator panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety features • BendGuard safety device for upper tools up to 390 mm • CE marking Additional Equipment • TRUMPF BendMaster automation (standard configuration) • Robot/handling • Sturdy base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary feed-through for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Remote diagnostics via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first automated bending cell with image recognition for maximum flexibility. Sheet metal up to 40 kg, 6-axis backgauge sensor system. Highest repeat accuracy due to angle sensors (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Stanje: rabljeno, Manzoni high-speed press 60 tons, strokes 110/308 Bsdpfxekn Hqge Abhscu Used - Bargain

Stanje: rabljeno, številka stroja/vozila: 008167, Delovno območje os X: 6000 mm Delovno območje os Y: 1750 mm Bcodpfx Abjx A Hczohou Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 30 Število mest za orodja: 72

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Pritisna sila: 60 t maks. delovna širina: 2550 mm svetlina med stebri: 2550 mm za pločevino (pri polni delovni širini) do: izsev stebra: 250 mm hitrost upogibanja: 75 mm/s hitrost vračanja: 95 mm/s Bcsdpoyda Uzjfx Abhou nastavitev zadnjega prislona: 500 mm Hidravlični pogon: 380 V, 4 kW Potreben prostor: 2920 x 1350 x 2250 mm Teža: 4,7 t Krmiljenje CYBELEC

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stiskalna sila: 60 t, teža bale: 450 kg, Horizontal baler DIXI 60 SLD Year of manufacture: 2014 Press has been serviced / new hydraulic cylinder installed. Semi-automatic 60 ton baling system for efficient volume reduction of residual (recyclable) materials in industry and commerce: - Cardboard - Tetra packs - Foils - Foams - PET bottles - Insulation mats - and other compressible materials. Bcsdpfxsyfgq Sj Abhou Machine dimensions (L x H x W) approx. mm: 4150 (5080) x 1725 x 2035 Feed opening (W x H, standard) mm: 990 x 1110 Machine weight approx. kg: 5,420 Pressing force max. kN: 60 t / 600 kN Pressing cycle (average) approx. s: 47 Bale size (W x H x L) approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Tying: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on weight, volume and, above all, distance. When requesting a quote, the following information is relevant: delivery address (postal code and city), but further details require a phone call. Therefore, we kindly ask you to contact us by phone to inquire about transport costs and additional delivery conditions. Our contact details can be found under the legal information of the seller. Cash payment upon collection possible. We sell and export worldwide. Due to our very large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before making a purchase. We issue intra-community invoices – excluding VAT. Business hours: Mon–Fri: 8:00–16:00 Sat: closed

Stanje: dober (rabljeno), Leto izdelave: 2008, vrsta goriva: električni, dolžina vilic: 1 mm, Neto masa: 4.585 kg Dvižna zmogljivost: 2.500 kg CE-oznaka: da Tehnično stanje: dobro Vizualno stanje: dobro Bedpfx Asx Hhcgsbhecu Transportne mere (D x Š x V): 2,38 x 1,3 Država proizvajalca: DE Za dodatne informacije se obrnite na Christiana Theißena. Proizvajalec: Still Tip: RX 60-25 Letnik: 2008 Vrsta izdelka: Rabljeno Podatki: Maks. višina dviga: 3,65 m Maks. dvižna moč: 2500 kg Dolžina vilic: 1,25 m Pogon: Elektro Skupne mere D x Š (brez vilic): 2,38 x 1,30 m Višina stroja: 2,73 m Lastna masa: 4.585 kg Posebnosti: bočni pomik, zaščitna streha, prednje steklo Lokacija: 41468 Neuss takoj na voljo

Stanje: zelo dobro (rabljeno), Robot ABB IRB4600-60/2.05 in krmilnik IRC5 RAZVOJ GSG ROBOTICS Bsdpjxq Tq Isfx Abhocu Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima sedež v Marl od leta 2015 in ponuja obsežno servisno območje za vzdrževanje in popravila robotov. Skozi leta smo postali celovit partner za vsa vprašanja v zvezi z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za dva znana proizvajalca robotov, ABB in Fanuc.