Gildemeister Nef Ct 40 nakup rabljenega (235)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 29.200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600 L capacity and a 50 µm filter, as well as a high-pressure pump with selectable 8 or 20 bar. The machine is equipped with a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar feeder for 3-metre bars. With a chip discharge height of 1,250 mm, it is designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S • Mechanical and electrical pre-installation for fire extinguishing unit • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 litres • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar feeder: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Travel of movable spindle stock: 80 mm • Tool carriage with turret tooling • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (retrofit) • Machine operating hours: 29,200 h Advantages of the machine Technical advantages • Chip discharge height: 1250 mm Additional information Gedpfx Aaox D H I Te Ujiu Machine still under power

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 27.896 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2101-0171, premer struženja: 20 mm, največja hitrost vrtenja: 10.000 obr/min, vrtilni moment: 14 Nm, Oprema: podajalnik palic, transportni trak za ostružke, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis Data Linear axis Z1 / X1 / Z1 – Travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Max. feed rate: 40 m/min Linear axis Z1 / X1 / Z1 – Max. acceleration: 10 m/s² Linear axis Z1 / X1 / Z1 – Nominal force: 1,250 N Linear axis Z2 / X2 – Travel: 180 / 230 mm Giodjy Dr S Hjpfx Aa Usu Linear axis Z2 / X2 – Max. feed rate: 40 m/min Linear axis Z2 / X2 – Max. acceleration: 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS Control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Operating hours: 85,620 h Program run time: 27,896 h EQUIPMENT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Stanje: rabljeno, Leto izdelave: 2007, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Description: General: Year of manufacture: 2007 Control: Siemens 840 D Bar capacity: 65 mm Turning diameter: 250 mm Turning length: 650 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35 kW Max. torque: 370 Nm C-axis: 0.001° Bar capacity: 65 mm Chuck: Hainbuch Spanntop size 65 Chuck cylinder: Hollow clamping cylinder Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 26 kW Torque: 290 Nm C-axis: 0.001° Chuck: Hainbuch Spanntop size 65 Chuck cylinder: Semi-hollow clamping cylinder Z-axis: 670 mm X-axis: 175 mm Turret I (X/Y/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 300 mm Y-axis: 80 mm (+ / - 40 mm) Z-axis: 650 mm Turret II (X/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Gedoyamflepfx Aa Ujiu Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 180 mm Z-axis: 650 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system Measuring systems: Direct in all X-axes (glass scales) Bar feeder: IRCO Breuning Parts discharge: Finished parts gripper + transfer belt Emulsion mist separator: Mechanical Setup mode: Electronic handwheel

Stanje: rabljeno, Parts donor We are dismantling the CNC lathe GILDEMEISTER type GDM 42/2A CNC control: Eltropilot EPL 2 Machine no.: 4.5733 Year of manufacture: 1989 Machine not operational – electrical issues Standard turning diameter: 185 mm Max. swing diameter: 400 mm Cross slide travel = facing path: 190 mm Longitudinal slide travel = longitudinal path: 450 mm Spindle bore in turning spindle: 52.7 mm Spindle passage in draw tube: Ø 42 mm Feed rate X and Z axes: max. 3000 mm/min Spindle speed: 40-6300 rpm, stepless Spindle drive motor power: 22 kW Mains connection: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT Ø 200 mm - 12-position tool turret, VDI 40, every second station powered - 6 powered tool positions - Electrical cabinet included, standing separately Footprint of complete machine (L x W x H): 5000 x 2500 x 2100 mm Total weight: approx. 5.7 tons Good condition Transport dimensions: Basic machine space requirement (L x W x H): 3000 x 2300 x 1900 mm Basic machine weight: approx. 4.8 tons Electrical cabinet space requirement (L x W x H): 2500 x 550 x 2000 mm Electrical cabinet weight: approx. 450 kg Without chip conveyor Gijdjdzqm Repfx Aa Usu Main motor missing Individual parts available upon request

Stanje: rabljeno, Leto izdelave: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum speed: 8,000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 travel: 320 mm X1 travel: 50 mm Y1 travel: 255 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 25 mm Slide 1 Tool Mount: Tool positions Fixed, with tool shank 16 x 16 mm: 5 units Slide 2: X2 travel: 165 mm Z2 travel: 200 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 30 mm Slide 2 Tool Mount: Number of turret stations with integrated spindle: 8 units Number of axial live tools (integrated): 8 units Coolant tank, approx.: 400 l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder Gisdpfotzyx Tjx Aa Usu - 5-position tool holder plate for slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub-spindle - 2 double drill holders for rear machining support with cylinder - Sub-spindle parts ejector

Stanje: dober (rabljeno), Leto izdelave: 1997, - Krmiljenje: SIEMENS SINUMERIK 840-C - Maks. premer palice: 65 mm - C-os - Hitrost glavnega vretena: 31 - 6.300 1/min - Revolver 1: 8 postaj, od tega 4 pogonske - Revolver 2: 8 postaj, od tega 4 pogonske - Hitrost pogonjenih orodij: 4.000 1/min - Oba revolverja z notranjim hlajenjem - Visokotlačna naprava Gisdoxa Epbjpfx Aa Usu - Transporter ostružkov - Podajalnik palic IRCO SiMag 65 - Maks. dolžina palice: 3200 mm Dimenzije D x Š x V: - Stroj 3400 x 1700 x 1800 mm - Podajalnik palic 4000 x 1000 x 1400 mm - Transporter ostružkov 3000 x 1100 x 1600 mm Skupna teža: ca. 6.000 kg

Leto izdelave: 2000, stanje: dober (rabljeno), Gildemeister MF Sprint 42 4 kos ravnih aktivnih orodij Gjdpfx Aaeyiym Uo Uoiu Statični nosilec Delovna orodja niso vključena

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Godpoin Ub Tefx Aa Uoiu Type: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 12.013 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 580 mm, premer struženja: 100 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 36 mm, TEHNIČNI PODATKI Premer palice: 36 mm Premer vpenjalne glave: 100 mm Dolžina struženja: 580 mm Obratovalni premer nad ležiščem: 145 mm Stružni premer: 100 mm Hitrost vrtenja: 2 x 25 - 8.000 min⁻¹ Prevzemno vreteno: da Indeksiranje: 2 x C-os, 0,001° Revolverska glava Število revolverskih glav: 2 x 12-kratni VDI 25 Pogon postaj za orodja: 2 x 12 Hitrost vrtenja orodja: 31 - 6.300 min⁻¹ PODATKI O STROJU Krmiljenje: Sinumerik 840 D Skupna potrebna moč: 50 kVA Teža stroja: ca. 6 t Gisdpfjxqpfbjx Aa Uju Prostorska potreba: ca. 4,8 x 2,2 x 2 m Obratovalni čas: 21.521 h Vreteni čas: 12.013 h OPREMA - SIMAG podajalnik palic 42.1, letnik 2000

Stanje: rabljeno, CNC control system, numeric control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Rack with 20 module slots – 12 modules installed Installed modules: 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output Card 2 pieces 0.651.708-57.3 I32 Input Card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position Control Gsdpfx Asflrtxsa Usiu 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial Interface 1 piece 0.651.974-23.2 ABS Termination Card 1 piece 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, prehod palice: 60 mm, model krmilnika: Siemens 840D Powerline, največja hitrost protivretena: 5.000 obr/min, TEHNIČNI PODATKI Vrtina vretena: 65 mm Prehod palice: 60 mm Maks. hitrost glavnega vretena: 5.000 min⁻¹ Hitrost protivretena: 5.000 min⁻¹ Gedpfx Aasymw Iqe Uoiu PODROBNOSTI STROJA Krmiljenje: Siemens 840D Powerline Teža stroja: 3.500 kg OPREMA C-os Magazin za podajanje palic IEMCA Master 880/33 HF (dolžina palice do 3.200 mm) Hlajenje / hladilni agregat Vijačni tračni transporter za odrezke

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5601-0106, stružna dolžina: 320 mm, največja hitrost vretena: 10.000 obr/min, skupna masa: 2.800 kg, prehod palice: 33 mm, opremljen z Iemca Boss 542, nov leta 2000 – dobro opremljen – upravljanje Ge Fanuc 18i-T Gedpfx Aajxn R N As Uoiu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 32.700 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 165 mm, največja hitrost vrtenja: 5.000 obr/min, prehod palice: 65 mm, model krmilnika: SIEMENS 840 D, Oprema: transportni trak za ostružke, TEHNIČNE PODROBNOSTI X1-pomik: 165 mm Z1-pomik: 220 mm X2-pomik: 165 mm Z2-pomik: 150 mm X3-pomik: 165 mm Z3-pomik: 650 mm Y3-pomik: 80 (+50/-30) mm Premer prehoda palice: 65 mm Hitrost glavnega in nasprotnega vretena: 5.000 min⁻¹ Revolver: 3 s po 12 postajami (vse gnane) Hitrost gnanih orodij: 4.000 min⁻¹ Vpenjalo orodja: VDI 30 z gnano po DIN 5480 PODROBNOSTI STROJA Krmiljenje: SIEMENS 840 D Giedjymmdbjpfx Aa Usu Obratovalne ure Vklopne ure: 52.511 h Ure vretena: 32.700 h OPREMA C-os Y-os Hladilni sistem Transporter za ostružke Podajalnik palic TOP Automazioni XF 375

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, STRUŽNICA GILDEMEISTER GS20 VARIANTA 25 MM Električno in mehansko obnovljena - Pnevmatska vpenjalna glava za končno obdelavo obnovljena - Nova skupina za pripravo zraka in elektromagnetni ventili - Radialni in aksialni vozički na poz. 1-2-4-5 - Primem kos na poziciji 6 Gjdpfx Aasw Sxpte Ueiu MEHANSKA REVIZIJA: 1. Revizija bobna 2. Revizija vozičkov 3. Revizija čelnih delov in ročic 4. Revizija vreten 5. Revizija odpiranja/zapiranja vpenjalne glave 6. Revizija navojnega sklopa ELEKTRIČNA REVIZIJA: 1. Nov PLC Siemens S71200 in panel Siemens KTP700 2. Cam encoder 3. Zamenjava relejev

Stanje: rabljeno, Leto izdelave: 2000, Revolver 1 – Čelno/vzdolžno struženje 155/280 mm Revolver 2 – Čelno/vzdolžno struženje 82/120 Gildemeister Sprint 65 mm Vrtina vretena (glavno vreteno) 79 mm (s kleščnim vpenjanjem 65 mm) Vrtina vretena (podvreteno) 65 mm (s kleščnim vpenjanjem 42 mm) Vrtljaji vretena 25-5000 obr./min (glavno vreteno) C-os – 5000 obr./min Revolver z 8 postajami Krmiljenje: Siemens Sinumerik 840 C Opremljeno z: Gijdjy Hppzopfx Aa Usu Magazin za nalaganje palic proizvajalca Simag model 65.1 – 3200 mm – leto 2000 Transportni trak za ostružke Razni nosilci orodij

Stanje: rabljeno, Leto izdelave: 1985, Core drilling diameter - max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofitted and modernized by TBT Drilling - solid drilling approx. 1 - 18 mm Drilling - reaming approx. 25 mm Drilling depth 320 mm Centre height over bed/table 150 mm Stroke of drilling slide max. approx. 500 mm Stroke of positioning slide (linear guides) 500 mm Spindle distance 125 mm Gsdpfx Ast Hwvaoa Ujiu Drilling feed/rapid traverse stepless approx. 35 - 1,000/7,000 mm/min Centre distance between spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive of the complete machine approx. 33 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump components (approx. Ø 25 x 150 mm, bore approx. 5 mm) which are fed via an inclined conveyor into a dual-orientation station, positionally checked, and then automatically and in pairs clamped in the machining zone between drill bushing carrier and powered tailstock via a loading portal (with 2 x double grippers) mounted transversely to the machine. After machining, the second set of grippers transfers the workpieces to a blow-off and drill breakage inspection station. After successful inspection, the workpieces fall into transport containers. - Sequence programming and monitoring via SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated high-frequency spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw - Separate drilling oil unit, approx. 1,500 litres, with various pumps and a sophisticated band filter cleaning system - Separate hydraulic unit approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate control and switch cabinets, CE marked Condition: Good to very good - ready for demonstration soon Delivery: Ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1991, Turning diameter: 42 mm Turning length: 250 mm Control system Total power requirement: kW Machine weight approx.: t Space requirement approx.: m GILDEMEISTER Universal 8-axis CNC lathe with bar feeder Model: GAC 42 Year of manufacture: 1991 Serial No.: 5.1096 Bar diameter: 42 mm Chuck diameter: 140 mm Spindle bore: 56 mm Spindle speeds (485 Nm max.): 71 – 6,300 rpm The machine is equipped with: - 2 units of 2-axis side cross slides - 2 units of 1-axis side cutoff slides - 1 unit of 2-axis turret slide Turret slide traverse (X5/Z5): 40 / 274 mm Feed / rapid traverse: 5 / 15 m/min Feed force transverse / longitudinal: 600 / 1120 daN Cross slide traverse (X3/Z3, X4/Z4): 70 / 164 mm Feed / rapid traverse: 5 / 8 m/min Cutoff slide traverse (X1, X2): 70 mm Feed / rapid traverse: 5 / 8 m/min Spindle drive: 18 kW Overall drive: approx. 25 kVA - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: - GILDEMEISTER 8-axis CNC path control EPL 2 with color display, electronic handwheel, and all standard options: graphics, cycles, subroutines, parallel programming, etc. - 4 CNC side slides (2 with traverse/longitudinal axes, 2 with traverse axis), equipped with presettable quick-change system, tool shank 20 mm (square) - Tool turret with 8 VDI 30 stations, 4 of which are driven for drilling, milling, tapping with powered tools - Rotating pick-off device (chuck diameter 80 mm) for rear-side machining, using a linear tool carrier mounted on the right bed side (max. 3 tools) - Hydraulic hollow clamping device with collet chuck - SAMECA hydrostatic bar feeder MONOSAM 45 - 2-circuit coolant system, BMF chip conveyor, lockable sliding door, various driven tool holders, operating manual, miscellaneous accessories Thanks to the combination of a powered tool turret, rear-side machining, and 4 CNC side slides, this machine offers outstanding flexibility! Condition: Good to very good – demonstration ready Delivery: Ex stock – as inspected Payment: Net cash – upon receipt of invoice We look forward to receiving your order. Further conventional and CNC lathes available from stock – please inquire for details. Gisdpjt Hwz Ajfx Aa Uou

Stanje: dober (rabljeno), Leto izdelave: 1990, Ref.-Nr.: 10542 Proizvajalec: GILDEMEISTER Godjxmd Txepfx Aa Ueiu Tip: AS - 16 Leto izdelave: 1990 Maks. premer palice: 16 mm Število vreten: 6 kos Dolžina vodilne palice: 3,3 m Dodatne informacije: Stroj si je mogoče po dogovoru ogledati pod napetostjo.

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter 640 mm Turning length 1,185 mm Control system: SINUMERIK 840D Maximum workpiece diameter 640 mm Distance between spindle heads 1,500 mm Slide I: X1 / Y1 / Z1 / B Gjdpfx Aoydfllja Uoiu Travel in X-direction 550 mm Travel in Y-direction 180 mm Travel in Z-direction 1,185 mm B-axis 240° Feed rate X-axis 0 - 40,000 mm/min Feed rate Y-axis 1 - 24,000 mm/min Feed rate Z-axis 1 - 70,000 mm/min Feed rate B-axis 1 - 20 rpm Rapid traverse X/Y/Z 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00/11.00/7.50 kN Tool holder HSK 63 Milling spindle speed 10 - 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque 60 / 100 Nm Number of tools in magazine: 46 pcs Max. tool length 350 / 200 mm Tool diameter 80 mm Tool diameter with 2 free adjacent spaces 120 mm Max. tool weight 6 / 10 kg Slide II: X2 / Z2 Travel in X-direction 180 mm Travel in Z-direction 1,050 mm Feed rate X-axis 1 - 24,000 mm/min Feed rate Z-axis 1 - 36,000 mm/min Rapid traverse X + Z axes 24 / 36 m/min Feed force Z / X S6: 11.00/9.00 kN Turret (indexable) 12 positions Tool holder DIN 69880 Ø40 Driven tool stations - number: 12 Driven tool speed 1 - 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm Slide III Z3 mm Travel in Z-direction 1,150 mm Feed rate Z-axis 1 - 36,000 mm/min Rapid traverse Z-axis 36.00 m/min Feed force Z-axis S6: 13.00 Nm Main spindle ISM90 Main spindle speed 10 - 4,000 rpm Drive power 100% duty cycle 36.00 kW Drive power 40% duty cycle 45.00 kW Torque at 40% / 100% duty cycle 800 / 630 Nm Spindle bore 80 mm Counter spindle speed 10 - 5,000 rpm Drive power 100% duty cycle 21.00 kW Drive power 40% duty cycle 28.00 KW Torque at 40% / 100% duty cycle 320 / 240 Nm Spindle bore 80 mm Total connected load 70.00 kW Machine weight approx. 20.00 t Space requirement approx. 8.50 x 4.50 x H3.10 m Machine with SIEMENS SINUMERIK 840D control, main and counter spindle, chip conveyor, oil mist separator, DMG Automation WH10top. Main spindle ISM90: hollow clamping unit, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial hollow clamping unit, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off device with integrated conveyor belt, automatic safety hood, differential pressure clamping. With coolant pump frame: - Pump 1: 17 l/min at 80 bar - Pump 2: 20 l/min at 8 bar - Pump 3: 40 l/min at 20 bar No coolant system included, previously connected to central supply. Accessories: Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off gripper for turret

Stanje: pripravljen za uporabo (rabljen), izvrtina vretena: 36 mm, premer struženja nad prečnim suportom: 33 mm, stružna dolžina: 320 mm, Technical data: Main spindle: Maximum turning diameter: 33 mm Maximum speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Slide 1: Number of stationary tools with 16 x 16 shank: 5 tools Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Slide 2: Number of turret stations with integrated spindle: 8 stations Number of axially-driven tools (integrated): 8 stations Coolant tank, approx.: 400 liters Coolant pump, maximum output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Gisdpow Rcd Esfx Aa Usu Equipment: - Fanuc iT CNC control - Parts discharge system - IEMCA bar feeder magazine - 5-position tool plate for slide 1 - Electrical and software interface for bar feeder magazine - Drill holder for main spindle and pick-up spindle - 2 double drill holders for rear working support with cylinder - Part ejector for pick-up spindle

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 4.000 obr/min, premer struženja nad ležiščem sani: 640 mm, navor nasprotnega vretena (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle heads: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° X-axis feed rate: 0 - 40,000 mm/min Y-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 70,000 mm/min B-axis feed rate: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool holder: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% DC: 13.20 kW Drive power 40% DC: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 vacant stations: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm X-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Powered tools - number: 12 Speed: 1 - 4,000 rpm Drive power 100% DC: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% DC: 36.00 kW Drive power 40% DC: 45.00 kW Torque at 40% / 100% DC: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% DC: 21.00 kW Drive power 40% DC: 28.00 kW Torque at 40% / 100% DC: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total connected load: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control CNC control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG-Automation WH10top Main spindle ISM90: through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Part extraction unit with integrated conveyor belt Automatic safety guard Differential pressure clamping With coolant pump frame: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret Gisdpfxswyvc Ue Aa Usu

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 11.022 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07520000211, stružna dolžina: 1.070 mm, premer struženja nad prečnim suportom: 400 mm, premer struženja: 560 mm, moč vretenovega motorja: 37 W, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 79 mm, potovalna razdalja osi X: 485 mm, pomik osi Y: 160 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a coolant treatment unit as well as a comprehensive selection of HSK 63 - A tools, approximately 40 tools in total. Also comes with a Berg chuck, see photos for details. The machine is being sold due to a lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Gijdjug Uc Nepfx Aa Uou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, CNC stružno-rezkalni center GILDEMEISTER TWIN 500 Linear Leto izdelave: 2002 Siemens krmiljenje Tehnični podatki: Obhodni premer: 610 mm Stružni premer: 610 mm Stružna dolžina: 1870 mm Pogonska moč: 69 kW Hitrost vrtenja: 3200 min-1 Navor C osi: 650 Nm Glavno vreteno levo Premer vpenjalne glave: 250-500 mm Največji premer palice: 102 mm Zgornji suport Hitrost hitrega pomika X/Y/Z: 45/24/70 m/min Pot suportov X1/Y1/Z: 605/105 mm Stružno-rezkalno vreteno HSK 63A Največja hitrost vretena: 12.000 rpm B-os Zasuk osi B1: 120° Ločljivost: 0,001° Orodni magazin Gisdpfxsw Tarfo Aa Usu Število orodij: 40 Največja dolžina/število orodij: 350 mm / 40

Stanje: rabljeno, Hydraulic self-centering steady rest, Luenette, Lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Model: SLK 8-70 N Gijdpeiv Irljfx Aa Ueu Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Steady rest base: 245 x 240 mm Design: stationary - 3 pieces roller bearings, Ø 35 mm - Roller width 18 mm - hydraulically self-centering Dimensions (L x W x H): 350 x 250 x 550 mm Net weight: 65 kg In good condition

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Main spindle: max. bar capacity: 65 mm, draw tube bore: 75 mm, collet chuck diameter: 160 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 150 Nm, nominal power (S1): 22 kW. Counter spindle: draw tube bore: 45 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 100 Nm, nominal power (S1): 16.8 kW. W2 axis (counter spindle): travel: 690 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X1 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z1 axis: travel: 220 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X2 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z2 axis: travel: 150 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X3 axis: travel: 165 mm, max. speed: 40 m/min, max. acceleration: 10 m/s², nominal feed force (S1): 2,400 N. Z3 axis: travel: 678 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Y3 axis: travel: 80 mm (+50/-30), max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Workpiece unloading (UA-WA): max. unloading weight: 4 daN, max. unloading diameter: 70 mm. Total number of tool stations: 12, tool holder diameter: 30 mm, driven positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0 rpm): 17 Nm, nominal power (S1-n = 4,000 rpm): 2.9 kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19", number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Total operating hours: 70,035 h powered on, 48,657 h in production, machine operates with cutting oil. Complete with documentation and bar feeder FMB Turbo 8-80 XT 3200. On-site inspection is possible. Gisdpfeyln Ekox Aa Usu