Gildemeister Gm 20 nakup rabljenega (235)

Leto izdelave: 2000, stanje: dober (rabljeno), Gildemeister MF Sprint 42 4 kos ravnih aktivnih orodij Fjdpfx Ahjyiym Usmsph Statični nosilec Delovna orodja niso vključena

Stanje: rabljeno, Leto izdelave: 2005, Tehnične podrobnosti: Premer kroženja: 320 mm Krmiljenje: 840 D SIEMENS Število obratov: 5000 1/min Motor vretena: 20 / 27 kW Premer vpenjalne glave: 250 mm Pomik - x: 650 mm Pomik - z: 300 mm Revolverska glava: 12 pozicij Nosilec orodja: VDI 40 Hitrost orodja: 4000 1/min Moč pogona orodja: max. 11,7 kW Teža stroja pribl.: 8 t Fpedpfomcibwox Ahmeh CNC vertikalni stružni stroj desne izvedbe, Pogonjena orodja, C-os, Visokotlačna črpalka 20 bar, 500l, filter Razpršilna pištola, 3-čeljustna vpenjalna glava, EWAB nakladalna postaja desno, Transportni trak za odrezke Števci: pribl. 23.500 ur vklopa, pribl. 8.000 ur vretena (skupaj) STROJ SE DOBAVI Z OBNOVLJENO VRETENO (0 ur)

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 Fedpfx Asin Ub Tehmoph – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: novo, Leto izdelave: 2024, Zaščitna plošča iz varnostnega stekla za Gildemeister CTX Beta 500 V4, artikel popolnoma nov, neuporabljen, v originalni embalaži. Fpsdpfxeyx U Slj Ahmoh

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 10.463 h, premer struženja nad prečnim suportom: 455 mm, stružna dolžina: 1.000 mm, premer struženja: 680 mm, izvrtina vretena: 107 mm, pomik po osi Z: 1.000 mm, Oprema: dokumentacija / priročnik, Gildemeister CTX600E Heidenhain CNC Pilot 3190 control unit Between centers (TDC): 1000 mm Swing over bed: Ø 680 mm Swing over cross slide: Ø 455 mm X-axis travel: 320 mm Z-axis travel: 1097 mm Turret: 12 positions Driven tools: Yes Tool holder: VDI 50 C-axis: Yes Main spindle power: approx. 30 kW Spindle speed range: 4 – 2800 rpm Spindle bore: Ø 107 mm Max. chuck diameter: 500 mm X-feed force: 8 kN Z-feed force: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tailstock Quill diameter: 120 mm Quill stroke: 120 mm Fodpfx Ahjyl Sa Semeph Taper: MK5 (6) Quill force: 14 kN Dimensions & weight Weight: approx. 9,000 kg Length: 4300 mm Width without enclosure: 2000 mm Width with enclosure: 2450 mm Height: 2200 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 21.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80439430900, premer struženja nad prečnim suportom: 465 mm, premer struženja: 680 mm, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 300 mm, pomik po osi Z: 1.050 mm, razdalja med središči: 1.150 mm, TEHNIČNI PODATKI Maks. hitrost vretena: 3.500 min⁻¹ Razdalja med konicama: 1.150 mm Višina konic: 360 mm Pomik osi Z: 1.050 mm Pomik osi X: 300 mm Premer struženja nad posteljo: 680 mm Premer struženja nad sani: 465 mm Hitri pomik osi Z: 30 m/min Hitri pomik osi X: 30 m/min Ločljivost merilnega sistema linearnih osi X in Z: 0,001 mm Maksimalna teža med konicama: 350 kg Stožčasta vpenjalna konica: MK 5 Fpodoyw H E Uopfx Ahmeh PODROBNOSTI O STROJU Obratovalna napetost: 400 V Frekvenca: 50 Hz Obratovalni tok: 80 A Teža stroja: 7.500 kg OPREMA Samospennjeno vpenjalo Röhm (Röhm Duro-NC 260/3) Nosilci orodja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 12.013 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 580 mm, premer struženja: 100 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 36 mm, TEHNIČNI PODATKI Premer palice: 36 mm Premer vpenjalne glave: 100 mm Dolžina struženja: 580 mm Obratovalni premer nad ležiščem: 145 mm Stružni premer: 100 mm Hitrost vrtenja: 2 x 25 - 8.000 min⁻¹ Prevzemno vreteno: da Indeksiranje: 2 x C-os, 0,001° Fpodpexqpfbefx Ahmoh Revolverska glava Število revolverskih glav: 2 x 12-kratni VDI 25 Pogon postaj za orodja: 2 x 12 Hitrost vrtenja orodja: 31 - 6.300 min⁻¹ PODATKI O STROJU Krmiljenje: Sinumerik 840 D Skupna potrebna moč: 50 kVA Teža stroja: ca. 6 t Prostorska potreba: ca. 4,8 x 2,2 x 2 m Obratovalni čas: 21.521 h Vreteni čas: 12.013 h OPREMA - SIMAG podajalnik palic 42.1, letnik 2000

Stanje: rabljeno, CNC control system, numeric control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Rack with 20 module slots – 12 modules installed Fpjdpfxsflrtxj Ahmjh Installed modules: 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output Card 2 pieces 0.651.708-57.3 I32 Input Card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position Control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial Interface 1 piece 0.651.974-23.2 ABS Termination Card 1 piece 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, CNC stružnica GILDEMEISTER NEF 400 Leto izdelave: 2005 Siemens 840 D Tehnični podatki: Stružna dolžina: 650 mm Premer obdelave nad posteljo: 400 mm Premer obdelave nad sani: 270 mm Preboj vretena: 65 mm Prehod po osi X: 220 mm Prehod po osi Z: 700 mm Največje število obratov glavnega vretena: 4.000 obr/min Fpsdeyin Imspfx Ahmjh 8-pozicijski revolverski nosilec orodja Teža stroja: cca 3.175 kg

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 60.425 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja nad prečnim suportom: 350 mm, TECHNICAL DATA Swing diameter: max. 465 mm Turning length: 1050 mm Swing over bed: 680 mm Chuck diameter: 325 mm Travel X: 300 mm Travel Z: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: max. 3500 rpm Drive power: 33 kW Fpsdpfev Epzvjx Ahmsh Torque: max. 630 Nm Spindle bearing diameter: 120 mm Max. bar capacity: 90 mm Tailstock quill travel: 850 mm Quill stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5601-0106, stružna dolžina: 320 mm, največja hitrost vretena: 10.000 obr/min, skupna masa: 2.800 kg, prehod palice: 33 mm, opremljen z Iemca Boss 542, nov leta 2000 – dobro opremljen – upravljanje Ge Fanuc 18i-T Fjdpfx Ahjxn R N Aemsph

Stanje: rabljeno, Leto izdelave: 2000, Revolver 1 – Čelno/vzdolžno struženje 155/280 mm Revolver 2 – Čelno/vzdolžno struženje 82/120 Gildemeister Sprint 65 mm Vrtina vretena (glavno vreteno) 79 mm (s kleščnim vpenjanjem 65 mm) Vrtina vretena (podvreteno) 65 mm (s kleščnim vpenjanjem 42 mm) Vrtljaji vretena 25-5000 obr./min (glavno vreteno) C-os – 5000 obr./min Revolver z 8 postajami Krmiljenje: Siemens Sinumerik 840 C Opremljeno z: Magazin za nalaganje palic proizvajalca Simag model 65.1 – 3200 mm – leto 2000 Transportni trak za ostružke Fsdpfxey Hppzo Ahmeph Razni nosilci orodij

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 32.700 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 165 mm, največja hitrost vrtenja: 5.000 obr/min, prehod palice: 65 mm, model krmilnika: SIEMENS 840 D, Oprema: transportni trak za ostružke, TEHNIČNE PODROBNOSTI X1-pomik: 165 mm Z1-pomik: 220 mm X2-pomik: 165 mm Z2-pomik: 150 mm X3-pomik: 165 mm Z3-pomik: 650 mm Y3-pomik: 80 (+50/-30) mm Premer prehoda palice: 65 mm Hitrost glavnega in nasprotnega vretena: 5.000 min⁻¹ Revolver: 3 s po 12 postajami (vse gnane) Hitrost gnanih orodij: 4.000 min⁻¹ Vpenjalo orodja: VDI 30 z gnano po DIN 5480 Fpedpfxoymmdbj Ahmoh PODROBNOSTI STROJA Krmiljenje: SIEMENS 840 D Obratovalne ure Vklopne ure: 52.511 h Ure vretena: 32.700 h OPREMA C-os Y-os Hladilni sistem Transporter za ostružke Podajalnik palic TOP Automazioni XF 375

Stanje: dober (rabljeno), Leto izdelave: 1990, Ref.-Nr.: 10542 Proizvajalec: GILDEMEISTER Tip: AS - 16 Fpsdpfxjxmd Txo Ahmeh Leto izdelave: 1990 Maks. premer palice: 16 mm Število vreten: 6 kos Dolžina vodilne palice: 3,3 m Dodatne informacije: Stroj si je mogoče po dogovoru ogledati pod napetostjo.

Stanje: rabljeno, Leto izdelave: 1991, Turning diameter: 42 mm Turning length: 250 mm Control system Total power requirement: kW Machine weight approx.: t Space requirement approx.: m GILDEMEISTER Universal 8-axis CNC lathe with bar feeder Model: GAC 42 Year of manufacture: 1991 Serial No.: 5.1096 Bar diameter: 42 mm Chuck diameter: 140 mm Spindle bore: 56 mm Spindle speeds (485 Nm max.): 71 – 6,300 rpm The machine is equipped with: - 2 units of 2-axis side cross slides - 2 units of 1-axis side cutoff slides Fpodpfx Ast Hwz Aehmeh - 1 unit of 2-axis turret slide Turret slide traverse (X5/Z5): 40 / 274 mm Feed / rapid traverse: 5 / 15 m/min Feed force transverse / longitudinal: 600 / 1120 daN Cross slide traverse (X3/Z3, X4/Z4): 70 / 164 mm Feed / rapid traverse: 5 / 8 m/min Cutoff slide traverse (X1, X2): 70 mm Feed / rapid traverse: 5 / 8 m/min Spindle drive: 18 kW Overall drive: approx. 25 kVA - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: - GILDEMEISTER 8-axis CNC path control EPL 2 with color display, electronic handwheel, and all standard options: graphics, cycles, subroutines, parallel programming, etc. - 4 CNC side slides (2 with traverse/longitudinal axes, 2 with traverse axis), equipped with presettable quick-change system, tool shank 20 mm (square) - Tool turret with 8 VDI 30 stations, 4 of which are driven for drilling, milling, tapping with powered tools - Rotating pick-off device (chuck diameter 80 mm) for rear-side machining, using a linear tool carrier mounted on the right bed side (max. 3 tools) - Hydraulic hollow clamping device with collet chuck - SAMECA hydrostatic bar feeder MONOSAM 45 - 2-circuit coolant system, BMF chip conveyor, lockable sliding door, various driven tool holders, operating manual, miscellaneous accessories Thanks to the combination of a powered tool turret, rear-side machining, and 4 CNC side slides, this machine offers outstanding flexibility! Condition: Good to very good – demonstration ready Delivery: Ex stock – as inspected Payment: Net cash – upon receipt of invoice We look forward to receiving your order. Further conventional and CNC lathes available from stock – please inquire for details.

Stanje: pripravljen za uporabo (rabljen), izvrtina vretena: 36 mm, premer struženja nad prečnim suportom: 33 mm, stružna dolžina: 320 mm, Technical data: Main spindle: Maximum turning diameter: 33 mm Maximum speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Slide 1: Number of stationary tools with 16 x 16 shank: 5 tools Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Slide 2: Number of turret stations with integrated spindle: 8 stations Number of axially-driven tools (integrated): 8 stations Coolant tank, approx.: 400 liters Coolant pump, maximum output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Parts discharge system - IEMCA bar feeder magazine - 5-position tool plate for slide 1 - Electrical and software interface for bar feeder magazine - Drill holder for main spindle and pick-up spindle - 2 double drill holders for rear working support with cylinder Fsdpjw Rcd Ejfx Ahmeph - Part ejector for pick-up spindle

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, obratovalne ure: 2.859 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 600 mm, premer struženja: 290 mm, Univerzalni stružnica – GILDEMEISTER CTX Leto izdelave: 1993 Obratovalne ure: 2.859 h • Revolverski nosilec orodij s 12 postajami Fsdpfxeyxgi Ns Ahmsph • Največja hitrost vretena: 5.000 obr/min • Največji premer struženja (os X): 290 mm • Največja dolžina struženja (os Z): 600 mm • Hidravlična trije-čeljustna glava, Ø 200 mm • Premer izvrtine vretena: Ø 66 mm • Vključen transporter odrezkov Stroj je v zelo dobrem stanju in je bil uporabljan v tehnični izobraževalni ustanovi.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Manufacturer: GILDEMEISTER Model: NEF Plus 500 Year of manufacture: 1995 Control system: Grundig Fjdstpn S Ijpfx Ahmeph Approximate machine weight: 2,650 kg Speed range: 8 – 2,800 rpm Swing diameter: 500 mm Turning length: 1,000 mm Approximate space requirement: 2,500 x 1,750 x 1,850 mm Spindle bore: 70 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Hello, I am offering for sale a renowned brand CNC LATHE – GILDEMEISTER CTX 400 V3 equipped with driven tools and a C-axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Fedpfx Aetpuh Aehmsph Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 2000 _ Machine specifications: - Turret: 12-tool with VDI 30 holders (every second station is powered) - Maximum spindle speed: 5000 rpm - Maximum turning length in Z-axis: 640 mm - Maximum turning diameter in X-axis: 290 mm - C-axis - Driven tools - BERG KH 200 chuck - Maximum bar diameter: 65 mm – finished parts catcher - Cooling system - Hydraulic tailstock - Chip conveyor - Spindle drive power: 21 kW - Documentation (DTR) - Machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own in-house and mobile service - Over 700 DMG machines sold - Possibility of commissioning the machine at the customer’s site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection – 100% ready to work - Machine purchase available via installment plan or leasing.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Hello, I have for sale a CNC lathe from the renowned brand GILDEMEISTER, model CTX 400 V3, equipped with driven tools and C-axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control system: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine specifications: - Turret: 12 stations for VDI 30 holders (every second station is driven) - Max spindle speed: 5,000 rpm - Maximum turning length (Z axis): 640 mm - Maximum turning diameter (X axis): 290 mm - C-axis - Driven tools - Tool measurement probe - Spindle chuck: BERG KH 200 Fpodpfx Aetw U E Uehmoh - Maximum bar diameter: ø65 mm – finished parts unloader - Coolant system - Hydraulic tailstock - Chip conveyor - Spindle drive power: 21 kW - Documentation (DTR) - Machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own service – both stationary and mobile - We have sold over 700 DMG machines - Possibility to commission the machine at the customer's site - Operator training and delivery to the customer included in the price - All our machines undergo a professional technical inspection – they are 100% ready for work - Purchase possible via installment plan or leasing _ www_ppmsc_pl _ Tomek_Contact_+48 504 009 641 Paweł_Contact_+48 607 305 841

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Hello, I am offering for sale a CNC LATHE from the renowned brand DMG GILDEMEISTER, model CTX 500 V3, equipped with a C-axis and driven tools. The machine is in very good technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Fpodpfx Ahou Aauxjmeh Model: CTX 500 V3 Control: HEIDENHAIN 3190 with TURN PLUS software for program generation Country of manufacture: Germany Year of manufacture: 1998 _ Machine specifications: - Turret: 12-tool stations with VDI 40 holders (every second station is powered) - Max spindle speed: 3500 rpm - C-axis - Driven tools - Max turning length in Z-axis: 1150 mm - Max turning diameter in X-axis: 500 mm - BERG chuck, diameter 315 mm - Max bar diameter: 91 mm - Cooling system - Hydraulic tailstock – programmable control - Chip conveyor - Spindle drive power: 31 kW - Full documentation (DTR) - Machine weight: 9 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own stationary and mobile service team - We have sold over 700 DMG machines - Option to commission the machine at the customer's site - Operator training and delivery of the machine included in the price - All our machines undergo a professional technical inspection – they are work-ready - Machine purchase available via installment plan or leasing

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Lathe Model: CTV 250 - R Fpjdpfx Aei Ewq Sohmeh Manufacturer: DMG Gildemeister Serial Number: 6860000451 Power-on hours: 46,491 Spindle hours: 30,748 Footprint: 4m x 3m Optional: Cooling unit for connection of two CTV 250 machines

Stanje: potreben popravila (rabljeno), Leto izdelave: 2011, obratovalne ure: 8.545 h, Funkcionalnost: nefunkcionalno, stružna dolžina: 310 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 190 mm, pomik osi Y: 80 mm, pomik po osi Z: 370 mm, montažni premer: 30 mm, Condition: Non-functional. The machine has an unknown malfunction in the turret, therefore reference runs and axis movements are not possible. The machine requires repair! TECHNICAL DETAILS Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Distance between centers: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Control: Heidenhain CNC Pilot 4290 Spindle speed: 6,000 rpm Spindle bore: 73 mm Bar capacity: 50 mm Main spindle torque: 95 Nm at 100% and 127 Nm at 40% Tool turret - Number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min MACHINE DETAILS Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m Operating hours (power on): 36,443 h Main spindle operating hours: 8,545 h Interface: yes Fjdpfx Asw T Srdohmsph EQUIPMENT - 3-jaw chuck 160 mm with matching flange - 2 sets of spare jaws - Turret head for 12 tools with driven tooling - Sauter disc turret (C-axis = 300 rpm) - Chip conveyor 450 K-1/250; year of manufacture 2000 - Manual chuck installed – no hydraulic power chuck - Electrical cabinet with Rittal cooling

Stanje: rabljeno, Hydraulic self-centering steady rest, Luenette, Lynette SMW AUTOBLOK Fpodoiv Irljpfx Ahmsh Hydraulic steady rest with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Model: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Steady rest base: 245 x 240 mm Design: stationary - 3 pieces roller bearings, Ø 35 mm - Roller width 18 mm - hydraulically self-centering Dimensions (L x W x H): 350 x 250 x 550 mm Net weight: 65 kg In good condition

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Main spindle: max. bar capacity: 65 mm, draw tube bore: 75 mm, collet chuck diameter: 160 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 150 Nm, nominal power (S1): 22 kW. Counter spindle: draw tube bore: 45 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 100 Nm, nominal power (S1): 16.8 kW. W2 axis (counter spindle): travel: 690 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X1 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z1 axis: travel: 220 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X2 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z2 axis: travel: 150 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X3 axis: travel: 165 mm, max. speed: 40 m/min, max. acceleration: 10 m/s², nominal feed force (S1): 2,400 N. Z3 axis: travel: 678 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Y3 axis: travel: 80 mm (+50/-30), max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Workpiece unloading (UA-WA): max. unloading weight: 4 daN, max. unloading diameter: 70 mm. Total number of tool stations: 12, tool holder diameter: 30 mm, driven positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0 rpm): 17 Nm, nominal power (S1-n = 4,000 rpm): 2.9 kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19", number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Total operating hours: 70,035 h powered on, 48,657 h in production, machine operates with cutting oil. Complete with documentation and bar feeder FMB Turbo 8-80 XT 3200. On-site inspection is possible. Fsdpfx Aheyln Eksmoph