Gildemeister Gdm 90 nakup rabljenega (238)

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 450 mm, premer struženja: 290 mm, izvrtina vretena: 66 mm, potovalna razdalja osi X: 190 mm, pomik po osi Z: 450 mm, največja hitrost vrtenja: 5.000 obr/min, premer struženja nad ležiščem sani: 600 mm, Krmiljenje: EPL Država izvora: Nemčija Prehod vretena: Ø65 mm Revolver za orodja: 12 pogonskih mest Orodni držalo: VDI 40 Hitrost orodja: 3000 obr/min Teža: ca. 4.700 kg + 600 kg električna omara Lredpoy N Tdzjfx Agnsn Transporter za odrezke: BMF Bürener Maschinenfabrik Podajalnik palic: GIOVANNI CUCCHI, tip DB 70 Orodja za doplačilo Na voljo je skupno 6 strojev s podajalnikom palic (cena na stroj s podajalnikom) Na voljo je 1 stroj brez podajalnika (€ 6.500,-)

Stanje: rabljeno, FICHE TECHNIQUE - Nombre de broches : 6 - Cales transversales, en position : 1,2,4,5 - Course max. des cales transversales : 28 [mm] - Course max. des coulisses croisées : 45 [mm] - Course max. des broches frontales : 63 [mm] BROCHES - Diamètre max. de barre : 16 [mm] - Vitesse de rotation des broches : 400 - 6000 [tr/min] - Puissance du moteur de broche : 15 [kW] ALIMENTATION ÉLECTRIQUE - Tension d'alimentation : 400 [V] - Puissance totale installée : 31 [kVA] POIDS ET DIMENSIONS - Encombrement : 3 800 x 1 300 [mm] - Hauteur de la machine : 2 100 [mm] - Poids de la machine : 4 400 [kg] ÉQUIPEMENTS - Chariot mécanique double pour coupe et retour, en position : 6 - Broches frontales rotatives, en position : 1,2,3,4,5 - Sortie des pièces - Convoyeur à bande pour pièces - Goulotte de récupération des barres - Convoyeur à copeaux - Réservoir de liquide de coupe - Magasin de barres : Iemca PRA 40/33/P - Support de barres et son socle Lodpfx Aewvvrhjgnorn - Carénage du support de barres

Stanje: rabljeno, DONNÉES TECHNIQUES - Nombre de broches : 6 - Chariots transversaux, aux positions : 1, 2, 4, 5 - Course maximale des chariots transversaux : 28 [mm] - Course maximale des chariots croisés : 45 [mm] - Course maximale des broches frontales : 63 [mm] BROCHES - Diamètre maximal de barre : 16 [mm] - Vitesse de rotation de la broche : 400 - 6000 [tr/min] - Puissance de l'entraînement de broche : 15 [kW] ALIMENTATION ÉLECTRIQUE - Tension d'alimentation : 400 [V] - Puissance totale installée : 43 [kVA] Lsdpowvvrbefx Agnsrn POIDS ET DIMENSIONS - Encombrement au sol : 3 800 x 1 100 [mm] - Hauteur de la machine : 2 300 [mm] - Poids de la machine : 4 200 [kg] ÉQUIPEMENTS - Chariot mécanique double pour coupe et retour, en position : 6 - Broches frontales rotatives, en positions : 1, 2, 3, 5 - Dispositif d’évacuation des pièces - Convoyeur à bande pour pièces - Goulotte de récupération pour barres - Convoyeur à copeaux - Réservoir de liquide de coupe - Magasin de barres : Iemca PRA 40/31/P - Support de barres et son pied - Capot du support de barres

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Number of counter spindles: 1 - Max. stroke of front spindles: 120 [mm] - Max. bar feed: 130 [mm] SPINDLES * Max. bar diameter: 35 [mm] * Spindle speed: 218–4000 [rpm] COUNTER SPINDLE - Single-acting hydraulic counter spindle - Counter spindle position: 6 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Required floor space: 5950 x 1680 x 1980 [mm] - Machine weight: 10500 [kg] - Operating hours: 10946 [h] ACCESSORIES - Standard tool slide, in position: 6 - Hydraulic cylinder for reverse operation, at position: 6 - Fixed front spindles, positions: 1, 2, 3, 4, 5 Lrjdpfx Agou Habmonjn - Thread milling and polygon turning unit - Parts removal device - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: Iemca PRA 40/42F - Bar support and its base - Bar support housing - Oil mist extraction unit: Donaldson

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Number of counter spindles: 1 - Max. stroke of front spindles: 120 [mm] - Max. bar feed: 130 [mm] SPINDLES * Max. bar diameter: 35 [mm] * Spindle speed: 218–4,000 [rpm] COUNTER SPINDLE - Single-acting hydraulic counter spindle - Counter spindle position: 6 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 5,950 x 1,680 x 1,980 [mm] - Machine weight: 10,500 [kg] ACCESSORIES - Standard cut-off slide, at position: 6 - Hydraulic cylinder for reverse movement, at position: 6 - Fixed front spindles, at positions: 1, 2, 3, 4, 5 - Device for thread milling and polygon turning - Cam device - Secondary cut-off slide: sliding - Parts extraction - Chip conveyor Lredeu Habgopfx Agnjn - Coolant tank - Bar magazine: Pietro Cucchi - Oil mist extractor: Donaldson

Stanje: rabljeno, TEHNIČNI PODATKI - Število vreten: 2 - Število osi: 2 GLAVNO VRETENO - Hitrost vretena: 6500 [vrt/min] - Največji premer palice: 42 [mm] - Največji obdelovalni premer: 120 [mm] - Najmanjša ločljivost C-osi: 0,1 [stopinje] KONTRA VRETENO - Hitrost vretena: 6500 [vrt/min] - Največji premer palice: 42 [mm] - Najmanjša ločljivost C-osi: 0,1 [stopinje] ELEKTRIČNA OSKRBA - Napajalna napetost: 230 [V] - Skupna moč: 7,5 [kW] TEŽA IN MERE - Prostor potreben: 5.400 x 1.900 [mm] - Višina stroja: 2.000 [mm] - Teža stroja: 5.000 [kg] DELOVNE URE - Ure pod napetostjo: 33.912 [h] - Obratovalne ure: 21.069 [h] DODATNA OPREMA - Krmilje: FANUC 160i Lrsdpju E U Ufjfx Agnjn - Rezervoar za hladilno tekočino - Transporter za ostružke - Enota za odvzem kosov - Trakasti transporter za kose

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Maximum bar diameter: 20 [mm], 25 [mm] as option - Number of cross slides: 4 - Maximum feed length: 100 [mm] - Spindle speed: 420 - 5000 [rpm] - Indexing time: 0.7 [s] - Machining time: 1.4-60 [s] - Power: 11 [kW] - Dimensions: 5800 x 1500 [mm] - Weight: 6000 [kg] EQUIPMENT - 4 cross slides at positions 1, 2, 4, and 5 - 1 chip conveyor - 5 drills Ledpfx Aeuharrognorn - 1 bar feeder: IEMCA PRA41/31/P

Stanje: rabljeno, Leto izdelave: 1992, obratovalne ure: 53.500 h, Funkcionalnost: popolnoma funkcionalen, Strung CNC Proizvajalec: GILDEMEISTER Model: CTX-400 Leto izdelave: 1992 Krmiljenje: EPL-2 Delovne ure: ca. 53.500 h S/N: 310549 Tehnični podatki: - Revolver: 12 postaj VDI-30, od tega 6 gnanih postaj - Število vrtljajev: 25 - 5.000 vrt/min - Pogonska moč: 27,5 kW pri 60 % ED - Vretenova izvrtina: Ø 72 mm - Pomik X: 212 mm - Pomik Z: 640 mm - Maks. premer v obratu: 500 mm - Premer v obratu nad vodilom: 290 mm Lsdpfjzcd Hlex Agnsrn - Hidravlična konjiček (vlečen), hod pinole 100 mm / MK4 vpenjanje - Hidravlična luneta SMW Autoblok - Hidravlična 3-čeljustna glava 200 mm - Vpenjalna glava Hainbuch - Transporter za ostružke - Lovilec delov (demontiran / nepopoln) - Popolna programska navodila - Mehanska in električna dokumentacija - Velik paket dodatne opreme – čeljusti / nosilci - Paket rezervnih delov (pogonski jermeni / drobni deli) - 2x nožno stikalo - Teža stroja: 5,2 t - Nakladanje na tovornjak vključeno

Stanje: dober (rabljeno), Centre height: 260 mm Tailstock taper: MT 4 Quill stroke: 100 mm Lrodpfxsralkmj Agnsn This hydraulic tailstock is from a GILDEMEISTER CT 40 CNC slant bed lathe. Picture similar Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed/ways cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Lrodpjvr Eh Ejfx Agnen Speed range: 16 – 3,150 rpm Feed range, longitudinal and facing: 0.5 – 5,000 mm/min Rapid traverse, longitudinal + facing: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT screen General Description: CNC manual input control system with program input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu navigation and plain text display of all functions. Control keyboard, screen, and handwheel are housed in a separate chip protection cover. The EPL control offers the following features: Programs can be entered and edited directly by the operator via the EPL control without manual program preparation. NC programs in ISO/EIA format can be entered, output, or directly input manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, facing, and contour turning, including stock allowance. Thread cutting. Undercuts as per DIN 509 Form E and F and DIN 76, grinding allowance programmable. Axial and radial grooves according to DIN 471 and 472, including bottom finishing. Radii 90° and chamfers 45°. Automatic cutter radius compensation for cycles, undercuts, grooves, radius, and chamfering. Programming: Block-oriented, metric/inch, diameter in absolute input, radius in incremental input, full circle programming, subprogram technique, skip levels for program sections. Zero offset. Operating mode selection via menu. Program input and output: Menu-guided dialogue with operator prompts or direct dialogue. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged belt chip conveyor • 12-station VDI 40 turret, 6 standard tool stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric footswitch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 42.400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0680 0000521, potovalna razdalja osi X: 800 mm, največja hitrost vretena: 5.000 obr/min, stružna dolžina: 300 mm, izvrtina vretena: 79 mm, model krmilnika: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel X-axis: 800 mm Travel Z-axis: 300 mm Main drive speed range: 20 – 5,000 rpm C-axis speed range: 0 – 100 rpm Spindle bore: 79 mm Main drive torque: 200 Nm Spindle torque: 240 Nm Clamping device torque: 28 Nm Rapid traverse X-direction: 100 m/min Rapid traverse Z-axis: 45 m/min Tools and Tool Magazine Number of tool magazine positions: 12 Maximum driven tool speed: 6,000 rpm Lsdpfx Agjzb Efgonern Tool holder: VDI 40 Clamping area in working space (W x H): 340 x 430 mm Number of T-slots as per DIN 650: 7 MACHINE DETAILS Control model: Siemens 840D Main spindle power: 27 / 20 kW Total power requirement: 50 kVA Electrical specification — voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle hours: 42,400 h Power-on hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading system with 20 stations Power chuck (225 mm) Hydraulics 6x various turning tool holders 2x various live tool holders

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 used CNC turning-milling center Lredpfsq T I Izjx Agnjn Gildemeister Model TWIN 65 RG 2, year 2008 with Siemens 840 D Maximum turning length (Z-axis travel): 650 mm Maximum turning diameter over bed: 250 mm Maximum travel length X-axis: 300 mm Maximum rapid traverse X-axis: 30 m/min Maximum rapid traverse Z-axis: 30 m/min Maximum main spindle power: 35 kW Spindle bore diameter: 65 mm Minimum main spindle speed: 20 rpm Maximum main spindle speed: 5000 rpm Machine length: 7000 mm Machine width: 4700 mm Machine height: 2500 mm Machine weight: 10 t Equipment - Y-axis - Irco bar feeder ILS RBK 1200 mm - Workpiece removal device Technical data subject to change/errors excepted. Note: The machine is sold without chucks, as these remain with the previous owner!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, potovalna razdalja osi X: 220 mm, pomik po osi Z: 635 mm, število osi: 2, Horizontalni stružnica iz leta 1993. Ta Gildemeister CTX 400 je v dobrem stanju in popolnoma delujoča, opremljena z upravljanjem EPL 2. Priložena je odsesovalna cev/cev, priklopljena na stransko ohišje. Če iščete kakovostno stružnico, razmislite o Gildemeister CTX 400, ki ga imamo na voljo za prodajo. Za več podrobnosti nas kontaktirajte. - Proizvajalec: Gildemeister - Model: CTX 400 - Leto izdelave: 1993 - Stanje: Dobro / Popolnoma delujoče - Krmiljenje: EPL 2 - Priložena oprema: Odsesovalna cev/cev vidno priklopljena na stransko oblogo Lrodezb E E Tjpfx Agnen Tehnične specifikacije Protiprst: Ne Gonjena orodja: Ne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, potovalna razdalja osi X: 212 mm, pomik po osi Z: 640 mm, število osi: 2, Horizontalni stružnica iz leta 1991. Ta Gildemeister CTX 400 je opremljena z zanesljivim krmilnim sistemom EPL 2, ki zagotavlja učinkovito delovanje. Če iščete visoko kakovostno stružnico, razmislite o Gildemeister CTX 400, ki ga ponujamo v prodajo. Kontaktirajte nas za več podrobnosti. - Proizvajalec: Gildemeister - Model: CTX 400 - Leto izdelave: 1991 - Stanje: dobro / popolnoma funkcionalno - Krmilni sistem: EPL 2 Tehnične specifikacije Lodozb Ewcspfx Agnorn Kontra vreteno: Ne Pogonska orodja: Ne

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 14.901 h, Funkcionalnost: popolnoma funkcionalen, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC Turning/Milling Center DMG CTX beta 1250 TC 4A, year of manufacture 2012. The machine is equipped with Siemens 840D / ShopTurn 3G control and features main and counter spindles, B-axis, Y-axis, upper milling spindle, as well as a lower turret. Current operating hours approx. 14,901 h, current spindle hours approx. 5,000. The machine is still connected to utilities and can be inspected by appointment. Condition: Exceptionally Good / Meticulously Maintained Technical Data Process: Turning / Milling / Complete Machining Machine type: CTX beta 1250 TC 4A Year of manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control: Siemens 840D / ShopTurn 3G Main spindle / Counter spindle: each 1 x FNC 250, up to 5,000 rpm Main spindle: Hainbuch Spanntop nova Modular 80 Main spindle through bore: diameter 77 mm Ljdpfx Aozbg Txognjrn Counter spindle partial through bore: diameter 67 mm x 700 mm Coolant supply: 8 / 20 / 40 / 80 bar Short bar loader: IRCO ILS-RBK 100/16 Upper milling spindle: HSK-63A, 24-position disc magazine Travel of upper unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower turret: VDI 40, 12 tool stations, X-axis 195 mm, Z-axis 1,200 mm Extra: Turret-mounted steady rest SMW SLU-X-2-ZS 8–101 mm Footprint: approx. 9,200 x 2,600 mm incl. exhaust filtration system, chip conveyor, and bar loader Video footage and a large photo collection available on request via WhatsApp.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, For sale: GILDEMEISTER CTX 410 V6 CNC Lathe – driven tools, Y-axis, sub-spindle TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of manufacture: Germany Year of manufacture: 2007 Lsdpfx Agsy Rbz Dsnern The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 stations for VDI-30 tool holders (all positions driven) - Max spindle speed: 5,000 rpm - C-axis on both spindles - Driven tools - Y-axis - Sub-spindle - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - High-pressure coolant system - 250 mm 3-jaw hydraulic chuck on main spindle - 200 mm 3-jaw hydraulic chuck on sub-spindle - Through-hole main spindle (bore diameter: 77 mm) - Finished parts catcher - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a complete inspection. 100% functional. Connected and ready for operation. At Stal-Com, we have been selling, servicing, and providing training on DMG-group CNC machines for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo thorough technical inspections. In addition to Polish clients, our machines are purchased by customers across Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from us, we provide operator training and can set up production at the customer site. We maintain long-term cooperation with several companies, supplying them with subsequent machine tools.

Leto izdelave: 2003, obratovalne ure: 10.975 h, stanje: rabljeno, skupna dolžina: 4.500 mm, skupna širina: 2.500 mm, skupna višina: 2.300 mm, Barva: Bela Lastna teža: 6.500 kg Cena: Na zahtevo - Leto izdelave: 2003 - Dokumentacija na voljo: Da - CE-označba prisotna: Da - CE-certifikat prisoten: Da - Serijska številka: - Delovnih ur: 10.975 - Krmiljenje: CNC - Znamka krmilnega sistema: Siemens Ledpfx Aozd U A Sognern - Tip krmilnega sistema: Sinumerik 840D SL - Moč [kW]: 25,0 - Višina konic [mm]: 340 - Premer struženja nad posteljo [mm]: 680 - Premer struženja nad vozičkom [mm]: 565 - Razdalja med konicami [mm]: 600 - Premer vretena [mm]: 65 - Min. število vrtljajev vretena [rpm]: 0 - Maks. število vrtljajev vretena [rpm]: 5000 - Opcije: Transporter za ostružke, trivrata vpenjalna glava - X-os hod [mm]: 260 - Y-os hod [mm]: 635 - Transportne mere: 4500 mm x 2500 mm x 2300 mm (d x š x v) - Transportna teža [kg]: 6500 kg - Število transportnih enot: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev po diferenci: Podjetja lahko odbijejo DDV Dobava in odkup sta možna kadar koli za vso industrijsko opremo Lukas van Rossum

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Obodni premer nad posteljo/prizmatično desko: 320mm/150mm, višina konic: 160mm, konična razdalja: 750mm, maksimalna dolžina struženja: 740mm, pomik X/Z: 185mm/700mm, premer vpenjalne glave: 200mm, število vrtljajev: 4000 o/min, hitri pomik X/Z: 5m/10m/min, število orodnih postaj: 8, hod pinole konjička: 120mm, premer pinole konjička: 60mm, dimenzije stroja X/Y/Z: ca. 2300mm/1500mm/1700mm, teža: ca. 2000kg, krmiljenje: Heidenhain. Dokumentacija je na voljo. Možen ogled na lokaciji. Ledpfxezdum Do Agnjrn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 53.548 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 01160014061, stružna dolžina: 630 mm, premer struženja: 420 mm, odpiranje primeža: 66 mm, vrsta upravljanja: CNC krmiljenje, Oprema: transportni trak za ostružke, Ni minimalne cene – zagotovljena prodaja za najvišjo ponudbo! TEHNIČNI PODATKI Območje obdelave Premer struženja: maks. 420 mm Dolžina struženja: maks. 630 mm Premer vretena: 66 mm Revolver Glava za orodje: 12 orodij Sauter VDI30 CNC krmilnik: 4290 Heidenhain PODATKI O STROJU Električni podatki Napetost: 400 V Pomožna napetost: 230 V / 24 V Frekvenca: 50 Hz Tok: 80 A Priključna moč: 44 kVA OPREMA C-os z motornimi orodji Transporter za odrezke Dokumentacija Lrodpfsza D Rfjx Agnon 2 nosilca motoriziranih orodij Zunanja referenca: 598

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, CNC stružnica Proizvajalec: Gildemeister Tip: CTX 420 linear V3 Leto izdelave: 2003 Krmiljenje: Heidenhain Plus IT Premer vrtenja nad ležiščem: 680 mm Premer vrtenja nad pripravnim vozičkom: 565 mm Lsdpfxjxc Uq Te Agnsrn Prečno pomikanje: 260 mm Vzdolžno pomikanje: 635 mm Pogonska moč: 40/100% 25/37 kW Območje vrtljajev: 20 – 5000 vrt/min Teža cca.: 6500 kg Oprema: Pogonska orodja: 12 postaj Nosilec orodij: 12-kratni Sauter revolver VDI 30 Delni votli vpenjalnik Konjiček Samodejni pomik pinole Vpenjalni vretenec: Mk 5 Odvajalnik ostružkov Merilna roka Odvod oljne megle Pridržujemo si pravico do napak.

Stanje: rabljeno, GILDEMEISTER GM35 AC MULTI-SPINDLE LATHE WITH PIETRO CUCCHI BAR LOADER Lsdpfxewrpb Is Agnjrn We can offer the lathe and bar loader fully refurbished as new, complete with CE certificate.

Stanje: novo, Lathe fully overhauled both electrically and mechanically, as new, with repainting Replacement of the electrical cabinet with Siemens Series 1500 PLC Pendant control panel Replacement of cables and micro-switches Overhauled main motor Replacement of loss lubrication oil pump Replacement of tool cooling pump Door interlock checked with electromechanical system Pneumatic unit Loader interface Bar-end position 1 Replacement of all bearings Overhaul of slides Camshafts replaced Replacement of all lubrication distributors Replacement of working and threading clutches Lredpfxed Hza Ij Agnsn Pneumatic secondary chuck Fixed and rotating front chucks 20 mm diameter variant CE certification with supporting documentation

Stanje: novo, Leto izdelave: 2024, Gildemeister 42ACF: this is a multi-spindle automatic lathe, designed to meet the requirements of high efficiency production. This model stands out for its versatility, being capable of machining parts up to 42 mm in diameter with the same ease and precision. The 42ACF lathe offers a range of features that make it particularly easy to use. These include intuitive programming via the SIEMENS operator panel, allowing for easy setting and modification of spindle speed, cycle time, and threading speed. Technical data: ● Number of spindles: 6 ● Maximum bar diameter: 42 mm ● Hexagonal key: 36 mm ● Cross slides: 4 (positions 1-2-4-5) Lsdpfx Aerpniqjgnsrn ● Maximum feed length: 130 mm ● Main spindle speed: 400–4000 rpm (without threading) ● Indexing time: 1–1.5 s ● Cycle time: 2–90 s ● Power: 22 kW The Gildemeister 42ACF, on the other hand, is a multi-spindle lathe aimed at highly specialized industrial sectors, where precision and accuracy are essential.

Stanje: novo, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 mm - Bar passage enlargement on request: 25 mm - Cross slides: 4 (positions 1-2-4-5) - Maximum feed length: 100 mm - Main spindle speed: 400 – 4,000 rpm with threading, 400 – 5,000 rpm without threading - Indexing time: 0.7 s - Cycle time: 1.4 – 60 s - Power: 11 kW ELECTRICAL SETUP FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT Consisting of AC motors (IP 54 protection), main and feed drive with a Siemens S7-1500 programmable PLC DOCUMENTATION: CE Certification with manuals Lrodpfx Ajq Nzl Tegnen Electrical diagrams 1 Hard copy + 1 Copy on USB with PDF files CE Directive 2006/42/EC - 2014/30/EU 2014/68/EU STANDARD

Stanje: skoraj kot novo (rabljeno), Lathe fully overhauled both electrically and mechanically, as new, including repainting. Lredpjwit Elofx Agnjn