Gildemeister Ctx 410 nakup rabljenega (234)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 63.778 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06800002061, največja hitrost vrtenja: 6.000 obr/min, izvrtina vretena: 56 mm, premer vretena: 90 mm, lastna masa: 6.000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse speed X: 100 m/min Rapid traverse speed Z: 45 m/min Chuck diameter: 200 mm Spindle nose, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Positioning accuracy at standstill: < 0.02 degrees Number of tool stations: 12 Shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Main spindle drive power: 25 kW Torque, 100% duty cycle: 160 Nm Hsdoy T Ikkjpfx Altor Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Clamping unit pressure: max. 700 bar Coolant unit Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 74.523 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06800001121, največja hitrost vrtenja: 6.000 obr/min, izvrtina vretena: 56 mm, premer vretena: 90 mm, lastna masa: 6.000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse speed X: 100 m/min Rapid traverse speed Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque (brake): 240 Nm Accuracy at positioning: < 0.02 degrees Number of tool stations: 12 Tool shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Main spindle motor power: 25 kW Torque at 100% duty: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Clamping device pressure: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Delivery rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Hedpfx Aley T Id Doter Operating hours: 74,523 h Note: Sale of the machine includes a small set of accessories!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 77.119 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06810000041, največja hitrost vrtenja: 6.000 obr/min, izvrtina vretena: 56 mm, premer vretena: 90 mm, lastna masa: 6.000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse speed X: 100 m/min Rapid traverse speed Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque (brake): 240 Nm Positioning accuracy: < 0.02 degrees Number of tool stations: 12 Tool shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Main drive (three-phase) power: 25 kW Hsdjy T Iddepfx Alter Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical Data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Clamping device pressure: max. 700 bar Coolant Unit Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The sale of the machine includes a small set of accessories!

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser . mm Drehlänge . mm Steuerung . Typ . CCUO Drehdurchmesser über Support . mm Planweg . mm Spindeldurchlass . mm Drehzahl . U/min Getriebestufen . Pinolenhub . mm Eilgang . m/min Hauptantriebsmotor . kW Dreibackenfutter Durchmesser . mm Gesamtleistungsbedarf . kW Maschinengewicht ca. . t Raumbedarf ca. . m Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Hodpfx Aleyqwb Ejtor Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: pripravljen za uporabo (rabljen), izvrtina vretena: 36 mm, premer struženja nad prečnim suportom: 33 mm, stružna dolžina: 320 mm, Technical data: Hsdpfx Ajw Rcd Esltor Main spindle: Maximum turning diameter: 33 mm Maximum speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Slide 1: Number of stationary tools with 16 x 16 shank: 5 tools Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Slide 2: Number of turret stations with integrated spindle: 8 stations Number of axially-driven tools (integrated): 8 stations Coolant tank, approx.: 400 liters Coolant pump, maximum output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Parts discharge system - IEMCA bar feeder magazine - 5-position tool plate for slide 1 - Electrical and software interface for bar feeder magazine - Drill holder for main spindle and pick-up spindle - 2 double drill holders for rear working support with cylinder - Part ejector for pick-up spindle

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 4.000 obr/min, premer struženja nad ležiščem sani: 640 mm, navor nasprotnega vretena (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle heads: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° X-axis feed rate: 0 - 40,000 mm/min Y-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 70,000 mm/min B-axis feed rate: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Hedpswyvc Ujfx Altjr Tool holder: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% DC: 13.20 kW Drive power 40% DC: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 vacant stations: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm X-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Powered tools - number: 12 Speed: 1 - 4,000 rpm Drive power 100% DC: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% DC: 36.00 kW Drive power 40% DC: 45.00 kW Torque at 40% / 100% DC: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% DC: 21.00 kW Drive power 40% DC: 28.00 kW Torque at 40% / 100% DC: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total connected load: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control CNC control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG-Automation WH10top Main spindle ISM90: through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Part extraction unit with integrated conveyor belt Automatic safety guard Differential pressure clamping With coolant pump frame: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter 640 mm Turning length 1,185 mm Control system: SINUMERIK 840D Maximum workpiece diameter 640 mm Distance between spindle heads 1,500 mm Slide I: X1 / Y1 / Z1 / B Travel in X-direction 550 mm Travel in Y-direction 180 mm Travel in Z-direction 1,185 mm B-axis 240° Feed rate X-axis 0 - 40,000 mm/min Feed rate Y-axis 1 - 24,000 mm/min Feed rate Z-axis 1 - 70,000 mm/min Feed rate B-axis 1 - 20 rpm Rapid traverse X/Y/Z 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00/11.00/7.50 kN Tool holder HSK 63 Milling spindle speed 10 - 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque 60 / 100 Nm Number of tools in magazine: 46 pcs Max. tool length 350 / 200 mm Tool diameter 80 mm Tool diameter with 2 free adjacent spaces 120 mm Max. tool weight 6 / 10 kg Slide II: X2 / Z2 Travel in X-direction 180 mm Hodpfx Aeydfllelter Travel in Z-direction 1,050 mm Feed rate X-axis 1 - 24,000 mm/min Feed rate Z-axis 1 - 36,000 mm/min Rapid traverse X + Z axes 24 / 36 m/min Feed force Z / X S6: 11.00/9.00 kN Turret (indexable) 12 positions Tool holder DIN 69880 Ø40 Driven tool stations - number: 12 Driven tool speed 1 - 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm Slide III Z3 mm Travel in Z-direction 1,150 mm Feed rate Z-axis 1 - 36,000 mm/min Rapid traverse Z-axis 36.00 m/min Feed force Z-axis S6: 13.00 Nm Main spindle ISM90 Main spindle speed 10 - 4,000 rpm Drive power 100% duty cycle 36.00 kW Drive power 40% duty cycle 45.00 kW Torque at 40% / 100% duty cycle 800 / 630 Nm Spindle bore 80 mm Counter spindle speed 10 - 5,000 rpm Drive power 100% duty cycle 21.00 kW Drive power 40% duty cycle 28.00 KW Torque at 40% / 100% duty cycle 320 / 240 Nm Spindle bore 80 mm Total connected load 70.00 kW Machine weight approx. 20.00 t Space requirement approx. 8.50 x 4.50 x H3.10 m Machine with SIEMENS SINUMERIK 840D control, main and counter spindle, chip conveyor, oil mist separator, DMG Automation WH10top. Main spindle ISM90: hollow clamping unit, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial hollow clamping unit, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off device with integrated conveyor belt, automatic safety hood, differential pressure clamping. With coolant pump frame: - Pump 1: 17 l/min at 80 bar - Pump 2: 20 l/min at 8 bar - Pump 3: 40 l/min at 20 bar No coolant system included, previously connected to central supply. Accessories: Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off gripper for turret

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, prehod palice: 60 mm, model krmilnika: Siemens 840D Powerline, največja hitrost protivretena: 5.000 obr/min, TEHNIČNI PODATKI Vrtina vretena: 65 mm Prehod palice: 60 mm Maks. hitrost glavnega vretena: 5.000 min⁻¹ Hitrost protivretena: 5.000 min⁻¹ Hjdpfxeymw Iqj Alter PODROBNOSTI STROJA Krmiljenje: Siemens 840D Powerline Teža stroja: 3.500 kg OPREMA C-os Magazin za podajanje palic IEMCA Master 880/33 HF (dolžina palice do 3.200 mm) Hlajenje / hladilni agregat Vijačni tračni transporter za odrezke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, število osi: 2, Ta Gildemeister MF twin 65 je bila izdelana leta 1996. Opremljena je z dvema revolverskima glavama, vsaka z 12 orodnimi postajami, ki so vse lahko motorizirane. Vključuje 14 pogonskih orodij in 14 držal za orodje. Stroj ima obe vreteni v zelo dobrem stanju in prehodnost palic 65 mm, dopolnjeno z avtomatskim podajalnikom palic Cucchi Pietro. Za več informacij o stroju nas kontaktirajte. • 2 revolverski glavi (12 + 12 orodnih postaj), vse motorizirane • Prehodnost palic: 65 mm • Obe vreteni v zelo dobrem stanju • Nova hidravlična/pogonska črpalka Dodatna oprema • Avtomatski podajalnik palic Cucchi Pietro • 14 pogonskih orodij • 14 držal za orodje Hedpsyaqr Aofx Altjr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 29.200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600 L capacity and a 50 µm filter, as well as a high-pressure pump with selectable 8 or 20 bar. The machine is equipped with a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar feeder for 3-metre bars. With a chip discharge height of 1,250 mm, it is designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S Hjdsx D H I Topfx Altjr • Mechanical and electrical pre-installation for fire extinguishing unit • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 litres • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar feeder: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Travel of movable spindle stock: 80 mm • Tool carriage with turret tooling • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (retrofit) • Machine operating hours: 29,200 h Advantages of the machine Technical advantages • Chip discharge height: 1250 mm Additional information Machine still under power

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 11.022 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07520000211, stružna dolžina: 1.070 mm, premer struženja nad prečnim suportom: 400 mm, premer struženja: 560 mm, moč vretenovega motorja: 37 W, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 79 mm, potovalna razdalja osi X: 485 mm, pomik osi Y: 160 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a coolant treatment unit as well as a comprehensive selection of HSK 63 - A tools, approximately 40 tools in total. Also comes with a Berg chuck, see photos for details. The machine is being sold due to a lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Hodpfxeug Uc Ns Altor

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Lathe Model: CTV 250 - R Manufacturer: DMG Gildemeister Serial Number: 6860000451 Hedpfx Aoi Ewq Soltsr Power-on hours: 46,491 Spindle hours: 30,748 Footprint: 4m x 3m Optional: Cooling unit for connection of two CTV 250 machines

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, CNC stružno-rezkalni center GILDEMEISTER TWIN 500 Linear Leto izdelave: 2002 Siemens krmiljenje Tehnični podatki: Hodpfow Tarfsx Altor Obhodni premer: 610 mm Stružni premer: 610 mm Stružna dolžina: 1870 mm Pogonska moč: 69 kW Hitrost vrtenja: 3200 min-1 Navor C osi: 650 Nm Glavno vreteno levo Premer vpenjalne glave: 250-500 mm Največji premer palice: 102 mm Zgornji suport Hitrost hitrega pomika X/Y/Z: 45/24/70 m/min Pot suportov X1/Y1/Z: 605/105 mm Stružno-rezkalno vreteno HSK 63A Največja hitrost vretena: 12.000 rpm B-os Zasuk osi B1: 120° Ločljivost: 0,001° Orodni magazin Število orodij: 40 Največja dolžina/število orodij: 350 mm / 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 08500, premer struženja nad prečnim suportom: 225 mm, stružna dolžina: 1.000 mm, premer struženja: 400 mm, največja hitrost vretena: 4.000 obr/min, model krmilnika: EPL 2, TECHNICAL DETAILS Max. turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Max. torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter in front bearing: 100 mm Tool turret Number of tool stations: 12 pos. Tailstock Hsdpfeyxm Tnjx Altjr Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MK 4 Max. quill pressure: 8,000 N Feed Rapid traverse (X / Z direction): 10 m/min Feed rate (X / Z direction): 5 m/min Feed force (X direction): 5,000 N Feed force (Z direction): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Stanje: rabljeno, CNC control system, numeric control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Rack with 20 module slots – 12 modules installed Installed modules: Hsdpsflrtxefx Alter 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output Card 2 pieces 0.651.708-57.3 I32 Input Card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position Control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial Interface 1 piece 0.651.974-23.2 ABS Termination Card 1 piece 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Stanje: rabljeno, Gildemeister GMX250 Hjdex Up A Depfx Alter

Stanje: dober (rabljeno), Leto izdelave: 2006, Upravljanje MANUAL PLUS 4110 Hodpfx Ajx Tg T Rjlter

Stanje: rabljeno, Hydraulic self-centering steady rest, Luenette, Lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Model: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Steady rest base: 245 x 240 mm Design: stationary - 3 pieces roller bearings, Ø 35 mm - Roller width 18 mm - hydraulically self-centering Dimensions (L x W x H): 350 x 250 x 550 mm Net weight: 65 kg Hjdpfx Aljiv Irlstjr In good condition

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Main spindle: max. bar capacity: 65 mm, draw tube bore: 75 mm, collet chuck diameter: 160 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 150 Nm, nominal power (S1): 22 kW. Counter spindle: draw tube bore: 45 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 100 Nm, nominal power (S1): 16.8 kW. W2 axis (counter spindle): travel: 690 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X1 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z1 axis: travel: 220 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X2 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z2 axis: travel: 150 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X3 axis: travel: 165 mm, max. speed: 40 m/min, max. acceleration: 10 m/s², nominal feed force (S1): 2,400 N. Z3 axis: travel: 678 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Y3 axis: travel: 80 mm (+50/-30), max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Workpiece unloading (UA-WA): max. unloading weight: 4 daN, max. unloading diameter: 70 mm. Total number of tool stations: 12, tool holder diameter: 30 mm, driven positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0 rpm): 17 Nm, nominal power (S1-n = 4,000 rpm): 2.9 kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19", number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Total operating hours: 70,035 h powered on, 48,657 h in production, machine operates with cutting oil. Complete with documentation and bar feeder FMB Turbo 8-80 XT 3200. On-site inspection is possible. Hodpfoyln Eksx Altsr

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica Gildemeister. Premer vrtenja nad ležiščem/vozičkom: 600 mm / 360 mm, dimenzije ležišča X/Y: 350 mm / 450 mm, dolžina vozička: 620 mm, širina vozička: 250 mm, pot vozička: 1100 mm, premer vpenjalne glave: 315 mm, premer vretena: 107 mm, premer osi vretena: 140 mm, moč vretena: 30 kW, navor: 950 Nm, število vrtljajev: 3150 obr/min, hitro premikanje X/Z: 10 m/min / 5 m/min. Premer konjička: 100 mm, hod konjička: 180 mm, maks. pritisk konjička: 1200 daN, dolžina struženja: 1000 mm. Mere stroja X/Y/Z: cca. 4350 mm / 2050 mm / 2000 mm, teža: cca. 6400 kg, delovnih ur: 49811 h. Na voljo je dokumentacija. Možen je ogled na lokaciji. Hodjx R Duaopfx Altjr

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC dvovreteni stružni stroj Gildemeister z Y-osjo. Prehod palice: 32 mm, orodjarna: 2x12, hitrost glavnega in kontra vretena: 8000 obr/min, krmiljenje: Siemens Sinumerik 840D Powerline, obratovalne ure: 39.426 h, ure vretena: 25.529 h. Vključuje KSS napravo, orodja in nalagalnik kratkih palic 1500 mm Iemca Vip 80E. Dokumentacija je na voljo. Ogled na lokaciji je možen. Približno na voljo od konca aprila 2026. Hsdoygw Svspfx Altor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Manufacturer: GILDEMEISTER Model: NEF Plus 500 Year of manufacture: 1995 Control system: Grundig Approximate machine weight: 2,650 kg Speed range: 8 – 2,800 rpm Hjdpfotpn S Isx Altor Swing diameter: 500 mm Turning length: 1,000 mm Approximate space requirement: 2,500 x 1,750 x 1,850 mm Spindle bore: 70 mm

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser 320 mm Hodpfxjyqtdie Altor Drehlänge . mm Steuerung Siemens Typ . CCUO Drehdurchmesser über Support . mm Planweg . mm Spindeldurchlass . mm Drehzahl . U/min Getriebestufen . Pinolenhub . mm Eilgang . m/min Hauptantriebsmotor . kW Dreibackenfutter Durchmesser . mm Gesamtleistungsbedarf . kW Maschinengewicht ca. . t Raumbedarf ca. . m Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A CNC twin-spindle turning and milling center by Gildemeister, including coolant system and chip conveyor, is available. Swing diameter over bed: 640 mm, machining diameter: 400 mm, center distance: 1930 mm, X/Z travel: 550 mm/1585 mm, Y-axis travel: +/-110 mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36 kW/45 kW, speed: 4000 rpm, torque: 600 Nm-730 Nm, bore: 107 mm. Milling spindle: speed: 12000 rpm, power: 13.2 kW/22 kW, torque: 100 Nm. Tool positions: 60, turret: 12-station star turret SW 380. Machine dimensions X/Y/Z: approx. 9300 mm/4600 mm/3100 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection possible. Hjdpswmdv Aofx Altsr

Leto izdelave: 1982, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica Gildemeister, vključno s transporterjem za ostružke in vpenjalom Forkat. 1) Gildemeister NEF CT 60, letnik: cca 1982, razdalja med konicami: 1000 mm, dolžina struženja: 1000 mm, maks. premer struženja: 460 mm, višina konice: 300 mm, širina postelje: 450 mm, vretena izvrtina: 107 mm, hitrost vrtenja: 3015 o/min, število orodnih mest: 12, premer pinole: 100 mm, hod pinole: 180 mm, dimenzije stroja X/Y/Z: cca 5400 mm/2100 mm/2000 mm, teža: cca 7000 kg. 2) Transporter za ostružke Allweiler GB 30L 38L. Brez filtra. Dokumentacija na voljo. Možen ogled na lokaciji. Hsdpfx Ajydp Azsltsr