Galvanotechnik Leipzig nakup rabljenega (612)

Leto izdelave: 2025, Stanje: novo, Dimenzije (dolžina/širina/višina) 2920x980x1450 mm Teža 1500 kg Skupna priključna moč 11,5 kW Ksdpfx Ahsvz Hzro Asfa Vakuumska membranska stiskalnica ÖKOVAC - Delovno območje 1150 x 2850 mm - Dimenzije mize 1300 x 3000 mm - Največja višina obdelovanca 400 mm - Digitalni prikaz temperature - Moč grelca 2x2,5 kW - Največja temperatura 100 °C - Vakuumska črpalka 40 m3/h - Moč motorja vakuumske črpalke 1,1 kW - Izvedba v skladu s CE - Električna napeljava Möller - Dimenzije: D=3050, Š=1350, V=1550 mm - Teža pribl. 400 kg - Raztegljivost kavčukove membrane 700 %, primerna do maks. 75°C Stiskalnica je primerna za lepljenje furnirja na ukrivljene in ravne elemente ter na frezane in profilirane dele (npr. kuhinjska fronta ali profili vrat).

Leto izdelave: 2025, Stanje: novo, Mere (dolžina/širina/višina) 1700x860x850 mm Teža 190 kg Skupna potrebna moč 1,5 kW Oscilacijski brusilni stroj za oblikovance OFS-3 - Delovna višina krtačnega agregata 150 mm - Krtačni agregat opremljen z brusnimi/krtačnimi trakovi - Moč motorja 1,5 kW - Število obratov brezstopenjsko nastavljivo 0 - 1400 obr/min - Napetost 400 V / 50 Hz - Dimenzije brusne lamele 150 x 60 mm - Dimenzije D=1700, Š=860, V=850 mm - Teža 190 kg MOŽNOST: Kedevz Hzlspfx Ah Ajfa - Brusna lamela 150 x 60 mm P120 EUR 2,00 / kos - Brusna lamela 150 x 60 mm P150 EUR 2,00 / kos - Brusna lamela 150 x 60 mm P180 EUR 2,00 / kos - Brusna lamela 150 x 60 mm P240 EUR 2,00 / kos - Brusna lamela 150 x 60 mm P320 EUR 2,00 / kos

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 1700 x 660 x 850 mm Kfedpfx Ahevz Hzfo Aoa Weight: 180 kg Total power requirement: 3 kW Profile Sanding Machine, Oscillating, OFS-2 - Working height of brush unit: 150 mm - Diameter of brush unit: 280 mm - Double-sided - Each brush unit equipped with 20 sanding/brush strips - Motor power: 3.0 kW - Infinitely variable speed control: 0 – 1400 rpm - Voltage: 400 V / 50 Hz - Dimensions of abrasive flap: 150 x 60 mm - Dimensions: L=1700, W=660, H=850 mm - Weight: 180 kg OPTION: - Abrasive flap 150 x 60 mm, P180, EUR 2.00 each - Abrasive flap 150 x 60 mm, P240, EUR 2.00 each - Abrasive flap 150 x 60 mm, P320, EUR 2.00 each

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 800x860x850 mm Weight: 140 kg Total Power Requirement: 1.5 kW Profile Oscillating Sanding Machine OFS-1 - Working Height of Brush Unit: 150 mm - Brush Unit Diameter: 280 mm - Brush Unit equipped with 20 sanding/brush strips - Motor Power: 1.5 kW - Infinitely variable speed control: 0 - 1400 rpm - Voltage: 400 V / 50 Hz - Sanding Lamella Dimensions: 150 x 60 mm - Machine dimensions: L=800, W=860, H=850 mm - Weight: 140 kg OPTIONAL: - Sanding Lamella 150 x 60 mm P120 EUR 2.00 / pc - Sanding Lamella 150 x 60 mm P250 EUR 2.00 / pc Kfodpfx Ahevz Hy Uo Aja - Sanding Lamella 150 x 60 mm P180 EUR 2.00 / pc - Sanding Lamella 150 x 60 mm P240 EUR 2.00 / pc - Sanding Lamella 150 x 60 mm P320 EUR 2.00 / pc

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Notcher NSF-6-20 Manual Foot-Operated Sprossen Notcher Morsö NF is a foot-operated sprossen notcher designed for cutting window mullions, cabinet doors, kitchen cabinets, etc. Morsö NF ensures a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is continuously adjustable. Kjdpfxevz Hyne Ah Aefa Stops, left and right, with adjustable end stops, guarantee precise work. The favourable lever transmission of the foot pedal allows extremely easy operation. Double springs return the knives to their starting position. When comparing the Morsö NF with a milling machine, please note the following advantages: – No dust – No noise – No compressor required - The Morsö NF delivers an even smoother and more precise cut - The Morsö NF produces no dust and therefore does not require an extraction system - Blade change on the Morsö NF takes less than 15 minutes - Set-up and adjustment of stops - As the knives wear down, the 45° angle remains unchanged, guaranteeing consistently precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm - Stops, left and right: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield - Waste chute - 6 end stops - Stops on the left and right sides of the machine - 1 neck knife (size of your choice) - 1 pair of side knives

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Kfedpfx Aevz Hyheh Aea Sprossen Punch NLF-12-26 Manual Foot-Operated Sprossen Punch Morsö NF is a foot-operated punching machine for cutting window mullions, cabinet doors, kitchen cabinets, etc. The Morsö NF guarantees a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is incrementally adjustable. Left and right stops with adjustable end stops ensure precise operation. The favorable lever-ratio of the foot pedal allows for very easy operation. Dual springs return the blades to the starting position automatically. Compared to a milling machine, the following points should be considered with the Morsö NF: – No dust – No noise – No compressor required - The Morsö NF guarantees a smoother and consistently more precise cut - The Morsö NF produces no dust, eliminating the need for an extraction system - Changing blades takes less than 15 minutes - Setup and adjustment of stops - Even as the blades wear, the 45° angle remains unchanged, constantly ensuring precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm - Left and right stop: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield - Scrap chute - 6 end stops - Stops on the left and right side of the machine - 1 neck blade (size of your choice) - 1 pair of side blades

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 2200x1650x1600 mm Teža 1300 kg Ksdpfx Aovz Hybeh Aofa Skupna potrebna moč 17,5 kW Klinasto-cinkarski rezkar MXB-3515AL - Debelina lesa min./maks. 20 - 150 mm - min. dolžina obdelovanca 100 mm - maks. delovna širina 450 mm - delovna miza 500 x 650 mm - premer vretena rezkarja 50 mm - premer vretena rezkalnika 30 mm - hitrost vretena rezkarja 6750 min⁻¹ - hitrost rezkalnika 6750 min⁻¹ - moč motorja rezkarja 11,0 kW - moč motorja rezkalnika 4,0 kW - moč motorja hidravlične enote 2,2 kW - skupna moč 17,2 kW - napetost 400 V, 50 Hz - upravljanje hidravlično - rezkalna miza vodena po preciznih THK linearnih vodilih - upravljanje s stopalko – mesto za nanos lepila - priključek stisnjenega zraka 6 bar - dimenzije D=2200, Š=1650, V=1600 mm - teža 1300 kg

Stanje: novo, Leto izdelave: 2025, Mere (D/Š/V) 3000x800x2100 mm Teža 1250 kg Kodpjvz Hxwofx Ah Asfa Skupna potreba po moči 0 kW Stiskalnica za perforirane plošče MULTIPRESS DELUXE - IZDELANO V NEMČIJI - Dimenzije perforirane plošče 2800 x 1800 mm - največja vpenjalna višina 1450 mm - največja vpenjalna širina 2600 mm - Tlačna sila na gonilo z zobatim kolescem 3000 kg / 30.000 N - vključno z 6 enotami za stiskanje z nastavljivimi gonili z zobatim kolescem, hod 150 mm - vključno z 6 kosov 90-stopinjskih prislonov - vključno s pritrdilcem z vretenastim vpenjalom - Mere D=3000, Š=800, V=2100 mm - Teža 1250 kg MOŽNOST: - Dodatna stiskalna enota z gonilom z zobatim kolescem €590,00 - Pritrdilec €250,00

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 3550 x 1450 x 1800 mm Weight: 3500 kg Total Power Requirement: 94.75 kW Twin-shaft saw MULTIMAX DUO-280 XL - Maximum cutting height: 280 mm - Minimum cutting height: 150 mm (100 mm) - Maximum working width: 300 mm Kodpfx Ahjvz Hxqo Asfa - Minimum workpiece length: 800 mm - Feed speed: 3–15 m/min - Saw shaft diameter: 60 mm - Speed: 3,000 rpm - Maximum saw blade diameter: 405 mm - Minimum saw blade diameter: 305 mm - Upper saw shaft motor: 45 kW - Lower saw shaft motor: 45 kW - Feed motor: 4.0 kW - Height adjustment motor: 0.75 kW - Total power: 94.75 kW - Voltage: 400 V / 50 Hz - Feed rollers: Ø 140 x 50 mm - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction ports: 4 x 140 mm - Working height: 860 mm - Dimensions: L = 3550, W = 1450, H = 1800 mm - Weight: 3500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2500 x 2170 x 2080 mm Weight: 4,250 kg Total power requirement: 81 kW MULTIMAX 170-500 XL Multi-Blade Saw - Max. working width: 500 mm - Chain width: 500 mm - Max. cutting height: 170 mm - Min. cutting height: 10 mm - Min. workpiece length: 740 mm - Max. saw blade diameter: 505 mm - Min. saw blade diameter: 405 mm - Saw blade bore diameter: 80 mm - Spindle diameter: 60 mm (without bush) - Speed: 2,600 rpm - Feed rate: 2.5 – 24 m/min - Saw shaft motor: 75 kW Kjdpfsvz Hwtex Ah Ajfa - Feed motor: 5.5 kW - Height adjustment motor: 0.75 kW - Total power: 81 kW - Voltage: 400 V / 50 Hz - Digital display for feed speed - Swivelling control panel at eye level - Electrically driven infeed roller table with pneumatically controlled pressure roller - Optical wood detection via light barrier - Electrically driven outfeed roller - Heavy-duty roller conveyors at infeed and outfeed - Hard chrome-plated transport chain surface - Saw bushing with a set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction connections: 2 x 150 mm - Working height: 820 mm - Machine dimensions: L = 4,850 mm, W = 2,020 mm, H = 1,880 mm - Transport dimensions: L = 2,500 mm, W = 2,170 mm, H = 2,080 mm - Weight: 4,250 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 2800x1100x2200 mm Gewicht 1100 kg Gesamtleistungsbedarf 8,8 kW Bohrmaschine horizontal und vertikal MULTI MZ3x8 - Max. Mittenabstand zwischen den Löchern 2440(L)mm x 300(B) mm - Min. Mittenabstand zwischen den Löchern 220(L)mm x 32(B) mm - Max. Bearbeitungslänge 2440 mm Kfodpfxevz Hwae Ah Aja - Min. Bearbeitungslänge 220 mm - Plattenstärke 12~40 mm - Gesamtzahl der Bohrer 32 Stk. - Horizontale Bohrreihen auf der Rückseite 4 Reihen - Max. Bohrdurchmesser 35 mm (Einzelbohrer) und 13 mm (Multi) - Max. Bohrtiefe 50 mm - Durchmesser des Bohrerschafts 10 mm - Länge der Bohrkrone 57 mm/70 mm - Drehzahl der Bohrkrone 2840 U/min - Anzahl der horizontalen L&R-Bohrreihen 2 Reihen - Anzahl der vertikalen Up-Bohrreihen 2 Reihen - Luftdruck 0,5~0,6 MPa - Gesamtleistung 8,8 kW - Nettogewicht 1100 kg - Gesamtabmessungen 2800 x 1100 x 2200 mm

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 650 x 1160 x 650 mm Kjdpjvz Hv Aefx Ah Ajfa Weight: 125 kg Total power requirement: 3 kW Metal grinding machine MSM-150 - Optimal grinding results due to high belt speed - Simple and quick belt change - Swivelling grinding unit with quick adjustment - Powerful drive for strong throughput - Running surface with graphite backing to minimize friction - Grinding belt: 200 x 150 mm - Speed: 18 + 37 m/sec - Dimensions: 650 x 1160 x 650 mm - Motor: S6/400V 3 kW - Weight: 125.0 kg Scope of delivery: - Base frame

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 750 x 1160 x 550 mm Weight: 85 kg Total power requirement: 2.2 kW Metal Grinding Machine MSM-75 - Optimal grinding results thanks to high belt speed - Easy and quick belt replacement Ksdevz Hv Nspfx Ah Aofa - Pivotable grinding unit with quick adjustment - Powerful drive for strong throughput - Running surface with graphite backing for minimized friction - Sanding belt: 2000 x 75 mm - Speed: 34 m/sec. - Dimensions: 750 x 1160 x 550 mm - Motor: S6/400V 2.2 kW - Weight: 85.0 kg - Belt speed: 34 m / sec Scope of supply: - Base frame

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 90 kg Total power requirement: 0 kW Mitre Chopper MODEL H (pneumatic) Morsø H Semi-Automatic Pneumatic Mitre Chopper – No dust – No noise Kjdjvz Hvvepfx Ah Asfa Designed for picture frame mouldings and furniture mouldings with rebate, the Morsø H performs double mitre cuts at 45° and single mitre cuts up to 90°. Ideal for crafts and joinery, the machine is also suitable for tenoning, notching, lapped mitres, and more. The Morsø H operates with knives in a pulling (non-rotational) cut, generating no dust. Cut-off waste is discharged via a chute away from the machine. Operation is by foot pedal and only requires an air compressor. The Morsø H guarantees mirror-smooth, precise cuts, enabling moulding pieces to be joined without further finishing. The horizontal motion of the knife head is adjustable in increments. Vertical movement can be set via stepless clamping. The Morsø H works on the same simple principle as the MORSØ-F, but pneumatically. Supplied with two-hand control for added safety. The pneumatic cylinder replaces the foot pedal, drawing the knives smoothly through the moulding. Morsø H Standard, incl.: safety shield, two-hand operation, waste chute, adjustable longitudinal stop, measuring scale up to 1,500 mm, adjustable stops (45°–90°), and adjustable rebate supports. - Double mitre cuts 45° - Single mitre cuts up to 90° - Max. working width: 100 mm - Max. working height: 165 mm - Cross-section: 65/65 mm - Measuring scale up to 1,500 mm - Air pressure: 6–8 bar - Air consumption per stroke: 9 litres - Air hose, minimum: 10 mm - Net weight: 90 kg

Leto izdelave: 2025, Stanje: novo, Dimensions (LxWxH): 0 x 0 x 0 mm Weight: 90 kg Total Power Requirement: 0 kW Mitre and Sash Punch MODEL FC For picture frame and furniture mouldings with rebate: The Morsø FC cuts double mitres at 45° and single mitres up to 90°. In craft applications, the machine is also highly suited for cutting tenons, notches, lap joints, covered mitres, etc. The Morsø FC operates with draw-cut knives (not rotary cutting). It cuts completely dust-free. Cut-off waste is discharged away from the machine via a chute. The Morsø FC is foot-pedal operated and requires neither a compressor nor electricity, i.e., the Morsø FC can be used virtually anywhere. Morsø FC guarantees a highly smooth and precise cut, allowing mouldings to be joined without further finishing. The horizontal movement of the knife head is adjustable in increments. Vertical movement can be set by means of a stepless clamp. The advantageous lever-action transmission of the foot pedal enables extremely easy operation. Double return springs bring the knives back to their starting position. The adjustable longitudinal stop with measuring scale ensures accurate setting for inside, outside, and rebate measurements. Morsø F Standard, includes: safety guard, waste chute, adjustable longitudinal stop, 1500 mm measuring scale, adjustable stops (45°-90°), and adjustable support tables for rebate profiles. Thanks to a special lever-gear mechanism, only light pressure is required. The knives are made of premium, finest-quality hardened steel. Option: Automatic rebate support tables. - Foot-pedal operation - Adjustable longitudinal stop - Measuring scale - Adjustable stops left and right of the knife head (45°-90°) - Adjustable support tables for rebate profiles Kedpevz Hvpefx Ah Aofa - With combination knife head (mitre and sash) - 1 set sash knives (10 - 18 mm neck width) - Locking screw with clamping lever and stop ruler - Double mitre cut at 45° - Single mitres up to 90° - Max. working width: 100 mm - Max. working height: 160 mm - Max. cross-section: 65 x 65 mm - Measuring scale up to 1,500 mm - Net weight: 90 kg

Leto izdelave: 2025, Stanje: novo, Mere (D׊×V) 0×0×0 mm Teža 35 kg Skupna potrebna moč 0 kW Kotna škarja MODEL BA (z merilno lestvico) Ročno upravljana kotna škarja Morsø BA je majhen in priročen namizni model, ki je zelo primeren za ozke letve z utorom. Glava z noži se lahko nastavi v dva položaja, kar omogoča gladek in čist rez. Merilna lestvica zagotavlja natančno nastavljanje dolžine. Kfsdpfjvz Hvcsx Ah Aoa - brez prahu - brez hrupa - brez kompresorja - čist rez - dvojni kotni rez 45° - enojni kotni rez do 90° - delovna širina, max. 70 mm - delovna višina, max. 115 mm - merilna lestvica do 650 mm - neto teža 35 kg

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kW Mitre Guillotine MODEL F For picture frame mouldings and furniture mouldings with rebate. The Morsø F cuts double mitres at 45° and single mitres up to 90°. Kodpevz Hvisfx Ah Asfa In workshop applications, the machine is also very suitable for cutting tenons, notches, half-mitres, etc. The Morsø F operates with knives in a shearing (non-rotational) motion. It works without producing dust. Offcuts are directed away from the machine via a chute. The Morsø F is operated by a foot pedal and does not require a compressor or electricity, which means it can be used almost anywhere. The Morsø F guarantees a perfectly clean and precise cut, so that mouldings can be joined together without any further processing. The horizontal movement of the knife head is adjustable in steps. The vertical movement can be set using a stepless clamp. The favourable leverage of the foot pedal allows for effortless operation. Double springs return the knives to their starting position. The adjustable length stop with measuring scale guarantees precision for inside, outside, and rebate measurements. Morsø F Standard configuration includes: safety guard, offcut chute, adjustable length stop, 1,500 mm measuring scale, adjustable stops (45°-90°), and adjustable rebate supports. Option: Automatic rebate supports. - Double mitre cuts 45° - Single mitre cuts up to 90° - Maximum working width: 100 mm - Maximum working height: 160 mm - Maximum cross-section: 65/65 mm - Measuring scale up to 1,500 mm - Net weight: 90 kg

Leto izdelave: 2025, Stanje: novo, Dimenzije (Dolžina/Širina/Višina) 0x0x0 mm Teža 35 kg Skupna potrebna moč 0 kW Kotna štanca MODEL B (brez merilne lestvice) Ročno vodena kotna štanca Morsö B je kompaktna in priročna namizna naprava, ki je zelo primerna za steklene letve ipd. Letve do ustrezne širine je mogoče rezati z enim rezom. – Brez prahu – Brez hrupa – Brez kompresorja – Čist rez Kjdpfx Aovz Hu Seh Aofa – Dvojni kot 45° – Enotni kot do 90° – Največja delovna širina: 70 mm – Največja delovna višina: 115 mm – Neto teža: 35 kg

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina): 7600x1400x1800 mm Teža: 2950 kg Skupna potrebna moč: 9,15 kW Ekstruder MHB-1560 AUTOMATIK - samodejno podajanje preko transportnega traku - maks. dolžina stiskanja: 6000 mm - maks. širina obdelovanca: 150 mm Kfjdpsvz Hu Esfx Ah Asa - maks. višina obdelovanca: 80 mm - maks. delovni pritisk: 7500 kg - motor hidravlične črpalke: 4,0 kW - motor pomika: 0,75 + 1,1 kW - motor prečne žage: 2,2 kW - napetost: 50 Hz, 400 V - skupna moč: 8,05 kW - število vrtljajev žage: 2800 U/min - premer žaginega lista: 350 mm, izvrtina 30 mm - hitrost pomika: 30 – 60 m/min - potreba po stisnjenem zraku: 8 bar - mere: L = 7600, Š = 1400, V = 1800 mm - teža: 2950 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 800 x 1000 x 1600 mm Kedpsvz Ht Iefx Ah Ajfa Weight: 350 kg Total power requirement: 0.6 kW Universal Sharpening Machine MF-2720 - Saw blade diameter: 80 - 700 mm - Saw blade holder swivel range: -30° to +45° - Grinding angle: -20° to +20° - Speed: 2850 rpm - Grinding wheel dimensions: 125 x 10 x 32 mm - Motor: 250 W - Connection: 230 V / 50 Hz - Weight: 29 kg Scope of delivery: - Diamond grinding wheel for carbide-tipped circular saw blades - Cast iron base for increased precision - Rubber feet for vibration damping and quiet operation - Spacer rings for different saw blade bore diameters

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 820 x 1150 x 1580 mm Weight: 450 kg Total Power Requirement: 2.2 kW Cutter and Profile Grinding Machine MF-223 Kfsdpfx Ahovz Htze Aea - Sharpening and manufacturing of profile knives from solid blanks using a template - Stable base and unit construction - Maximum knife length: 300 mm - Maximum tool diameter: 355 mm - Grinding unit adjustable horizontally +/- 45° - Back angle adjustable via grinding wheel according to scale - Motor: 2.2 kW / 400 V - Grinding wheel: Ø 205 x 32 mm - Mounting arbor: Ø 25, Ø 30, Ø 40, Ø 50 mm - Grinding wheel speed: 4,500 / 10,000 rpm - Copying finger carrier for precise transfer of the profile contour - Coolant device from above via flexible plastic hose prevents overheating of the knives even during heavy stock removal - Halogen lamp with adjustable mount - Armrest for fatigue-free operation - Sturdy tool holding device - Entire operation from the front side - Lubricant pump - Dimensions: L=820, W=1150, H=1580 mm - Weight: 450 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 1400x780x1500 mm Gewicht 500 kg Gesamtleistungsbedarf 2 kW Sägeblatt Schärfautomat MF-128 - für Brust- und Rückenschliff - min. / max. Sägeblattdurchmesser 150 mm / 500 mm - min./max. Dicke des Sägeblatts 2~8 mm - Aufnahmeadapter Ø 30, 40, 50 mm Ksdevz Htuepfx Ah Asfa - Drehzahl Schleifscheibenspindel 3800 U/min - Gesamtleistung 2 kW / 400 V / 50 Hz - max. Schleifscheibendurchmesser mm Ø125 mm - inklusive Diamantschleifscheibe Ø 125 x 32 x 10 mm - Schleifaggregat +/- 45° links und rechts verstellbar - Schleifaggregat +/- 45° neigbar - Kühlmitteleinrichtung von oben mittels Kunststoffgelenkschlauch verhindert ein Überhitzen der Zähne - Halogenlampe mit verstellbarer Halterung - gesamte Bedienung von der Vorderseite - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Abmessungen L=1400, B=780, H=1500 mm - Gewicht 500 kg

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina) 1100x750x1380 mm Teža 450 kg Skupna potrebna moč 0,5 kW Avtomat za ostrenje žaginih listov MF-127 Kjdpfx Aovz Htnoh Aefa - za brušenje čelne in hrbtne strani - največji premer žaginega lista 630 mm - sprejemni adapter Ø 20, 22, 25, 30, 50, 60 mm - število vrtljajev brusnega kolesa 3500 min⁻¹ - motor 470 W / 400 V - diamantno brusno kolo Ø 125 x 16 x 10 mm - brusni agregat nastavljiv +/- 45° levo in desno - brusni agregat nagiben +/- 45° - hladilna naprava od zgoraj s plastično gibljivo cevjo preprečuje pregrevanje zob - halogenska svetilka z nastavljivim nosilcem - celotno upravljanje s sprednje strani - dimenzije D=1100, Š=750, V=1380 mm - teža 450 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2300 x 1800 x 1400 mm Weight: 2300 kg Total power requirement: 37 kW Multi-blade saw MBS-1300-45 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 45 mm - Min. workpiece length: 600 mm - Spindle diameter: 85 mm - Saw spindle speed: 2600 rpm - Saw blade diameter: 255 mm Kedpfx Aovz Hrqoh Asfa - Max. 30 saw blades on the spindle - Motor output: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 7 pairs (14 units) - Extraction connection: 150 mm - Dimensions (L = 2300, W = 1800, H = 1400 mm) - Weight: 2300 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. Kfedovz Hq Tepfx Ah Aja They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.