Fliegl Asw 268 nakup rabljenega (197)

Stanje: novo, številka stroja/vozila: 408ba9a39bbb8087056d6e563, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Redpoi Ri Dajfx Abhen Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: rabljeno, številka stroja/vozila: 3ca51192c90a3f38a59d77748, lastna masa: 2.872 kg, največja dovoljena obremenitev: 15.128 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2019, velikost pnevmatike: 385/65 r22,5, Leto izdelave: 2019, Further information: Fine-grain steel welded construction, front stop, longitudinally adjustable and foldable, pair of guide rollers removable, front and rear, Swap Guard – swap body guide, located before and after each container lock, 4 container locks with sturdy outriggers based on 20-foot positions for swap bodies 7.15 m and 7.45 m, turntable with robust ball-bearing slewing ring, wheel chocks with holders, aluminium side underrun protection, side underrun protection set inward for optimal clearance to the swap body supports, steel rear underrun protection, rear underrun protection shortened for optimal clearance to the swap body supports, lighting system installed protected, quarter mudguards at the front and half mudguards at the rear, without impact protection, spare wheel holder in basket design, plastic toolbox. Rsdpoi Ri Dzjfx Abhen Drawbar (L = 2,200 mm) with tested 40 mm towing eye, drawbar length, drawbar height adjustment via spring. SAF disc brake axles with 430 mm disc diameter, axles/chassis laser measured to reduce tyre wear and fuel consumption, air suspension. 2-line compressed air brake system, colour-coded piping for easy servicing, air supply 208 litres, spring-actuated parking brake, 2 interchangeable coupling heads at the front, with connection lines to the truck, EBS, electronic braking system with EBS plug at the front, with connection cable. (Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS!) with lift/lower valve, hold function in both lift and lower positions, brake release function via button on vehicle beside the H & S valve, to release the brake in coupled condition, EBS power supply must be ensured! 24 Volt, multi-chamber lights, lateral yellow LED lighting, 2 white position lights at front, 2 white/red clearance lights at rear, 1 x 15-pin plug at front with connection cable, extra LED work light at the rear operated via reverse gear, front-centre mounted rearward-facing LED work light operated via reverse gear. Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), prepared for single-line number plate holder, warning sign according to ECE-70, ADR warning sign at the rear, foldable, contour marking with reflective tape according to ECE R 048, white on the side and red at the rear.

Stanje: novo, številka stroja/vozila: 71cc13750cef13b72f7a55abe, lastna masa: 5.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22,5², Further Information Chassis semi-trailer tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front panel 24 t, 2-speed landing gear, single-sided operation, straight lower section, without sliding compensation 2 wheel chocks with holders Folding underride guard Half-shell mudguards Integrated mudguard brackets, stone-resistant surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 tow hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-calibrated axles/chassis for reduced tire wear and fuel consumption Axles in off-road configuration Air suspension Rjdpfoi Ri Efjx Abhsn 1st axle automatic lift axle, including forced lowering and drive-off aid, activation via 3x braking (drive-off aid functions up to 30% axle overload and a max. speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line compressed air brake system with color-coded lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system, with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift and lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Control hydraulic via truck auxiliary drive Body Aluminum box-type body made of high-grade, abrasion-resistant material, front wall 5 mm thick, outer side walls from 30 mm hollow-chamber profiles, clean welded, with bulk material-repellent top rail profile. Internal access at the front wall (not compatible with Cramaro system). External shovel and broom holder on the front wall. Greenline—conical and aerodynamic body shape Membrane rear wall Rear wall pendulum mounted with double-link hinge and divided 2-leaf door (1⁄2 to 1⁄2), upper swing bracket, each door with a grain slider Rear wall with rubber seal Note! Heat-resistant to max. 170°C! Floor completely 6 mm thick Standing platform with ladder, connector plate for air/electricity and brake with large clearance for optimal usability Roll tarp stored on right side (FR-right), central locking on left side (FR-left) Operating Instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion. The specified total weight is technically possible; depending on the load, the permissible axle, support, and fifth wheel loads may not be reached (poor driving and trailing performance may result from incorrect load distribution) Registration/Country Marks Germany Test approval per EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, white on sides and red at rear Paintwork Chassis DB 7350 Novagr

Stanje: novo, številka stroja/vozila: 207ad28f83705ed0d38a4f174, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis Change Central-Axle Trailer Fine-grain steel welded construction Front stops, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 rear-flush (with 7.15 swap bodies not rear-flush, fork pockets/frame protrude) Telescopic support leg at front 1 pair gearbox support legs at front, with straight lower part and single-sided operation on FR right Wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Semi-shell mudguards Mounting for truck-mounted forklift at rear, including 2 fork insertion pockets, 2 extendable support tubes, holder for chain safety device with locking pin. Rear underrun protection with lighting unit, foldable. Includes 2 loose rubber buffers for rear wall protection; counterweight recommended! Note: Partial low ground clearance when fitted with forklift, potential poor trailing behavior, no warranty! (Forklift self-weight up to max. 1,500 kg for trailers). (With proximity switch for forklift control in combination with lift axle). Due to the forklift mount, axles are shifted rearwards; mind load distribution when driving without forklift—customer's risk! (For swap body trailers, driving with a forklift is only permitted in combination with a swap body). Forklift mount as per AU 203670 adapted for 7.45 m swap bodies. Counterweight at front between frames, approx. 300 kg, if required—exact assessment still pending Towing device for central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, or final check required upon order) Lower coupling drawbar Drawbar without length adjustment Axles + suspension SAF drum brake axles as per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Brake system Two-line compressed air brake system Color-coded line layout for easy servicing Rodoi Ri Iaepfx Abhon Spring-loaded parking brake Duomatic connection at front with line to tractor unit, located FR-left Duomatic connection at front with line to tractor unit, located FR-right EBS electronic braking system with EBS plug at front and connection cable, FR-left Note: Trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift and lower valve, hold function in both raised/lowered position Vehicle stability system Wheels and tires 235/75 R17.5, brand at manufacturer’s discretion Twin arrangement steel rims, factory silver Electrics 24 volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, side yellow LED lighting, protected installation! 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable, FR-left 2 x 7-pin sockets at FR-left rear for truck-mounted forklift 1 x 15-pin socket at FR-left rear for truck-mounted forklift LED worklights to both sides behind the 2nd axle (switched via reverse gear) Extra LED worklight at rear, switched via reverse gear Approval / License Plates Germany With Dekra inspection and certificate (per §13 EU FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on sides and red rear Paint Frame in DB 7350 Novagrau 10-year warranty

Stanje: novo, številka stroja/vozila: 83732a53562459145277be051, lastna masa: 4.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front end 24 t two-speed landing gear, single-side operation, with straight lower section, without compensating slide 2 wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface With anti-spray splash flaps on the last axle only 1 tarpaulin bar with bracket 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle as automatic lift axle, including forced lowering and start-up aid, activated by braking 3 times (start-up aid functions up to 30% axle overload and max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year rust-through warranty Brake system 2-line compressed air brake system, color-coded line layout for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure ABS functionality! With raise & lower valve Vehicle stability system Automatic tip lowering with shut-off valve Wheels and tires 385/65 R22.5, brand at the manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red track lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Aluminium box body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, fitted with bulk material-repellent top rail profile. Interior with ladder at front wall (not in combination with Cramaro). Shovel and broom holder on exterior of front wall. Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall as swing flap with double hinge, mounted externally with double hook lock. Rear wall with rubber seal. Note: Heat resistant up to max 170°C! Floor continuous 6 mm thick Standing platform with access, connection plate for air/electrics and brakes, with large clearance for optimal operability. Roll tarp can be placed on the right side (FR-right), with central locking on the left side (FR-left) Redpfx Aoi Ri Nbsbhjn Operating notes For transportation of salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent corrosion and material attack. The specified gross weight is technically possible; depending on the cargo, the total weight may not be achievable within the permissible axle, support, and saddle loads. (Poor driving and tracking behavior can result from incorrect load distribution) Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Chassis DB 7350 Nova grey 10 y

Stanje: novo, številka stroja/vozila: 8b1f4087611d72661dc0b3869, lastna masa: 4.500 kg, največja dovoljena obremenitev: 27.500 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis semi-trailer tipper Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front closure, patented 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating ram Wheel chocks with holder Foldable underrun protection Half-shell mudguards Tarp bar with bracket Tow hook at rear Axles & Suspension SAF disc brake axles Axles/chassis laser-measured – reduces tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle is an automatic lift axle, including forced lowering and starting aid, activated by 3x braking (starting aid is functional up to 30% axle load exceedance and up to a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Braking System 2-line compressed air brake system, color-coded lines for easy servicing Spring-loaded parking brake 2 anti-mix-up coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at front, no connection cable Note: The trailer may only be towed by towing vehicles ensuring ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red track-keeping lights at rear 2 x 7-pin anti-mix-up sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck PTO Body Rjdpfx Aei Ri Nfobhjn Steel round tipper body in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic ram and access ladder at front wall. Greenline - conical and aerodynamic body shape. Shovel and broom holder outside at front wall. Membrane tailgate Tailgate as pendulum flap with double-jointed hinge, mounted externally with dual hook locking. 2 clamping screws with toggle locks at bottom sides. Side walls full-length 4 mm, floor 4/5 mm, wear- and weight-optimized construction Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operability Roll tarp to be stowed on FR-right, with central locking on FR-left Operating Instructions For transports involving salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated gross weight is technically possible; depending on the cargo, the maximum permissible total weight may not be reached due to axle/support loads restrictions. (Poor driving and trailing behavior may occur due to incorrect load distribution) Registration Country / Plates Germany Approval according to EC 2007/46 Body strength in accordance with EN 12642 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Nova Grey, 10-year warranty against corrosion Landing legs coated black Body RAL 7035 Light Grey Fliegl advertising StoneMaster on sides and rear Roll tarp in RAL color on request, single-colored Available as thermally insulated version: Cover BA

Stanje: novo, številka stroja/vozila: 06017a31026c05fc8f6ccf5ae, lastna masa: 3.055 kg, največja dovoljena obremenitev: 14.945 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Swap body turntable trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20' base for swap bodies 7.15 and 7.45 meters Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-shell mudguards at the rear Drawbar turntable trailer coupling Redpji Ri Rcofx Abhen Drawbar with certified 40 mm draw eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Braking system 2-line air brake system, color-coded piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS plug at the front and connecting cable Note: The trailer must only be towed by towing vehicles that ensure ABS functionality! With raise & lower valve, holding function for both positions Wheels and tires 235/75 R17.5, manufacturer brand at the manufacturer's discretion Steel twin rims, factory silver Electrics 24V system, LED multi-chamber lights with resistor, side marker lights in amber LED, license plate illumination in LED (Note: certain towing vehicles may show fault diagnoses despite correct function) 2 white front position lights in LED 2 white/red rear outline marker lamps in LED 1 x 15-pin plug at the front with connecting cable Additional LED work light at the rear, switched via the reversing light Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey Note: Archive images!

Stanje: rabljeno, številka stroja/vozila: 26f50c72368441dbf86440716, lastna masa: 2.500 kg, največja dovoljena obremenitev: 10.900 kg, skupna masa: 13.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2015, velikost pnevmatike: 285/70 r19,5, Leto izdelave: 2015, Further Information Chassis: Fine-grain steel welded construction, telescopic support leg, wheel chocks with holder, steel underride guard, half-shell mudguards Tandem Trailer Drawbar: Drawbar with certified 50 mm towing eye, undercoupler drawbar mechanically length-adjustable Axles: BPW disc brake axles, air suspension with lift & lower valve, electronic dolly steering system Braking System: Two-line compressed air brake system, spring-actuated parking brake, Duomatic coupling head at front, with connecting lines to the tractor unit, fail-safe coupling heads for the semi-trailer, EBS, electronic braking system with EBS plug at front, including connecting cable Rsdsi Ri Rropfx Abhsn Electrics: 24 Volt, side yellow lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front with connecting cable to truck, 1 x 15-pin plug with connecting cable to the semi-trailer Approval: Contour marking with reflective tape according to ECE R 048, warning plate according to ECE - 70, truck Fifth wheel height approx.: 950 mm

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Rjdpfx Aei Ri Ryjbhen Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: d24246f092ae53c0e155d19dd, lastna masa: 2.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 16.000 kg, Further information Chassis: Tandem trailer Steel welded construction with approximately 152 mm high floor assembly, load-oriented and torsion-resistant steel frame design. Longitudinal floor frame with a load-resistant outer frame and guiding tunnel spaced at 600 mm intervals, tunnel with top and side alignment guides, tunnel height approx. 45 mm. Four container corner castings suitable for 20ft interchange units. 4 Jumbo support legs for parking height of 970 mm, laterally extendable and can be folded by 90°, with short safety struts and locking device, frame-mounted pin lock and robust drop latch as secondary transit locking system, symmetrical arrangement of the support legs—Type A2 for CWB C 745/782 for parking height approx. 970 mm. Reinforcement between support feet. 7 pairs of recessed lashing rings in the outer frame, each rated for 2.5 tonnes. Heavy-duty pallet stops on both sides, approx. 20-25 mm high, lash points every 200 mm, loading height reduced by approx. 20-25 mm. Side door retainers. Rear underrun protection made from flat steel. Floor Anti-slip phenolic plywood, approx. 27 or 30 mm thick (at manufacturer's discretion), designed for high point loads, suitable for forklift axle loads up to max. 4400 kg. Front wall/corner stanchions Front stanchions 2,800 mm high, remainder closed with tarpaulin, steel corner stanchions in volume design, quick-release system for side curtain at front wall. Centre posts 1 pair of sliding posts, fully adjustable lengthwise, with four latching pockets and an extended pocket at the bottom. Insert slats Three rows of aluminium V-insert slats or wooden slats as per manufacturer’s choice, One extra row of aluminium V-insert slats. Rear wall/rear corner stanchions Rear corner stanchions, steel up to the underside of the roof, tarpaulin hangers with round tube and tension ratchet. Rear portal doors, double-leaf, each door with two internal locking rods. Tarpaulin Tarpaulin with welded horizontal and vertical tension belts. Tension locks made from stainless steel. Roof Sliding curtain roof, rear end-lift foldable, roof can slide from rear to front, L-shaped roof beam suitable for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin colour: white. EcoLift - lifting roof, can be raised by approx. 380 mm, gas strut assisted. Approval / Plaques Country of registration: Germany Manufacturer certificate to EN 12642 XL Paintwork Frame: hot-dip galvanized Front corner stanchions: hot-dip galvanized Redpskt Ni Ujfx Abhjn Front wall: aluminium Rear corner stanchions: hot-dip galvanized Rear wall: white Tarpaulin: RAL 9005 deep black with advertising lettering Note: Images are archive photos.

Stanje: rabljeno, številka stroja/vozila: 5a722b71e07e463c6c5370ad2, lastna masa: 6.927 kg, največja dovoljena obremenitev: 28.073 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2016, velikost pnevmatike: 385/55 r19,5, Further Information Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin Note! With a frame neck height of 30 mm, the truck wheelbase must not exceed 3700 mm! Outer frame slightly angled with Load-Lock profile for lashing strap attachment. Note! To attach straps in conjunction with side walls, the side walls must be opened! Not permitted in the neck area! 10 pairs of additional lashing rings recessed into the outer frame, each rated for 2.5 t, outer frame with Load-Lock profile for lashing strap attachment. Note! Not usable with side walls closed! 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without load equalization, folding supports front of bulkhead, extendable outward and foldable. During travel, positioned as far inward as possible (for dropping under load), without supports, pull-out ladder at rear, side-mounted door holders, wheel chocks with holder, aluminium side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of and behind each axle, anti-spray splash guards behind each axle, rear underrun protection Heavy Blocker rear impact guard, heavy-duty pallet stop both sides, approx. 20–25 mm high, with lashing option every 200 mm, loading height reduced by approx. 20–25 mm, plastic toolbox SAF disc brake axles, air suspension, without lift axle 2-line compressed-air braking system, spring-loaded parking brake, 2 anti-interchange coupling heads at front, without connecting line, EBS (Electronic Braking System) with EBS socket at front, without connecting cable. Attention: The trailer may only be towed by tractors that ensure the functionality of ABS! With raise & lower valve, vehicle stability control system 24 volt, multi-chamber lights, lateral yellow LED side markers, 2 white position lights in the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin coded sockets at the front, without connecting cable Floor: Front section with steel floor and anti-slip coating, plywood panels approx. 30 mm thick, cross joints with Omega insert, on longitudinal subframes for high point load capacity, suitable for forklift axle load up to max. 7100 kg, in wheel well area with steel/chequer plate covering. Front wall/corner posts: 2,580 mm high, steel corner posts in volume version, side curtain release mechanism at the front wall, lower inside at approx. 140 mm height with steel impact protection Center posts: 3 pairs of sliding stanchions, adjustable over the entire length, with 4-way staking pockets and long pocket below, 3 pairs of stake positions, aluminum plug-in slats Rodpekyrlwefx Abhen Rear corner posts: Steel up to lower edge of roof, curtain retaining bracket with round tube and tension ratchet, rear portal doors, double-wing with 2 internal rod locking mechanisms each Curtain with integrated horizontal and vertical belts, tension locks made of stainless steel, customer branding on rear portal Roof: Sliding roof, rear section foldable upwards, can be slid from rear to front, L-type roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, curtain color: white, EcoLift – roof can be raised by approx. 380 mm, supported by gas struts, Anti-Ice system, with a central hose, automatic ventilation Country of registration: Germany, type approval according to EC 2007/46, load securing certificate according to EN 12642 XL (valid only with 4 rows of aluminum slats), additional DC 9.5 certificate,

Stanje: rabljeno, številka stroja/vozila: 37ccfb14057f542c66638bc2e, lastna masa: 6.300 kg, največja dovoljena obremenitev: 28.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, velikost pnevmatike: 385/55 r19,5, Further Information Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch kingpin, 14 pairs of lashing rings recessed into the outer frame, each rated at 2.5 tonnes, outer frame with load-lock profile for attaching tie-down straps. Note! Not usable with drop sides! 24-ton, 2-speed landing gear, single-sided operation, with semi-round lower section and straight mounting plate, with thrust compensation. 2-step sliding ladder at the rear, lateral door holders, wheel chocks with holder, aluminium side impact protection, galvanized steel underrun protection, quarter-shell mudguards ahead of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, spare wheel carrier for 1 spare wheel, with wheel fixing kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable. Attention: The towed vehicle may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Rsdpfx Ajkyrlzsbhsn With lifting & lowering valve, vehicle roll stability system, tire pressure monitoring system TPMS (Haldex), in connection with info center. 24 volts, multi-chamber LED lights, amber LED side marker lights, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin fail-safe sockets at the front, without connecting cable, LED safelight at the top in rear corner posts. Floor: approx. 30 mm thick plywood boards with Omega inserts in cross joints, mounted on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts: 2,600 mm high, steel corner posts in volume design, release device for side curtain at front wall, lower inner part approx. 140 mm high with steel rear impact protection. Centre posts: 5 sliding stanchions adjustable over the entire length, with 4-way insert pockets and extended pocket at the bottom (3 right-hand side, 2 left-hand side), 5 stanchion positions (3 right, 2 left), aluminium slats for slot-in. Rear corner posts in steel up to the lower roof edge, curtain attachment with round tube and curtain ratchet tensioner, rear portal doors in two wings each with 2 internal rotary bar locks. Curtain with welded horizontal and vertical belts, reinforcements for stanchions. Quick Lock system for side curtain with central lock, left side only, stainless steel tension locks on the right side, curtain with integrated vertical slats for load securing, one-sided on the left (then only 2 pairs of centre posts on the left). Roof: sliding roof, rear end lift-up, cover can be moved from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, curtain color: white, lifting roof mechanically adjustable by approx. 380 mm, liftable roof can be opened while doors are closed. Country of registration: Germany, type approval according to EC 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, pre-mounted for single-line number plate holder, warning sign according to ECE-70, reflective strips: white (continuous on lower part of side curtain and at top in corners), Reflective strips: red, surrounding the rear portal.

Stanje: rabljeno, številka stroja/vozila: 1dad0ba418a93eaeb83d187cb, lastna masa: 2.000 kg, največja dovoljena obremenitev: 11.400 kg, skupna masa: 13.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2018, velikost pnevmatike: 285/70 r19,5, Leto izdelave: 2018, Further information: Rjdpfji Riyajx Abhsn Fine-grained steel welded construction, fifth wheel coupling, manufacturer of our choice for 2 kingpins, with ball-bearing turntable, maximum pivot angle 20°, lockable, support at the drawbar, wheel chocks with holder, steel underrun protection, quarter-shell mudguards in front of and behind the axle assembly, with tarpaulin cover when empty. CLG undercoupling drawbar with certified 50 mm towing eyes for both dolly and motor vehicle. BPW disc brake axles with 370 mm disc diameter, air suspension with lift and lower valve. 2-line compressed air brake system, spring-loaded parking brake, Duomatic coupling head at the front with connecting lines to the motor vehicle, 2 non-interchangeable coupling heads for the semi-trailer including connecting coil. EBS by Wabco, electronic braking system, with CAN router, EBS plug at the front, with EBS connection cable to the semi-trailer. Note: The trailer may only be towed by vehicles that guarantee ABS functionality! Axle load identification for trucks via EBS, without truck installation. 24 Volt, 4 x 3-chamber rear lights + 1 round rear fog lamp, side yellow LED lighting, 2 white position lights to the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front with connecting cable to the truck, 1 x 15-pin socket with coiled cable to the semi-trailer, cable for reversing camera system with socket, additional LED working light at the rear, switched via reversing light. Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Saddle height approx.: 950 mm

Stanje: novo, številka stroja/vozila: 92df8e9d6c187f34b20298f39, lastna masa: 4.900 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22,5², Further information Chassis semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall - patented Central telescopic support leg, uncoupling under load not possible, in uncoupled position the vehicle must be sloped to the rear. 2 wheel chocks with holders Foldable underride guard Half-shell mudguards Integrated mudguard bracket, stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 tow hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle including forced lowering and start-off aid, activated by triple brake application (start-off aid operational up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake system 2-line compressed air brake system, color-coded piping for easy servicing. Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure operational ABS! With raise & lower valve Vehicle - driving stability system Wheels and tires Rodpfxei Riz Rj Abhon 385/65 R22.5 brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof sockets at the front, without connection cable Hydraulics Low pressure cylinder, max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Activation hydraulically via truck PTO Bodies Aluminium box body made of high-grade, wear-resistant material. Front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top section profile. Interior with access ladder on front wall (not in combination with Cramaro). Shovel and broom holder mounted outside at front wall. Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall pendulum flap with double hinge, external with double hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Continuous 6 mm thick floor Standing platform with entry, connection plate for air/electrics and brake with large clearance for optimum accessibility. One-sided roll tarp deposit FR-right, with central locking FR-left Operating notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the transported material. The specified total weight is technically possible; depending on the load, the permissible total weight may not be achievable within the allowed axle/support/semi-trailer loads. (Poor driving and trailing performance may occur due to incorrect load distribution) Registration country / license plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white, rear red Painting Frame DB 7350 Novagrau 10 years

Stanje: novo, številka stroja/vozila: b50cac2c60a813b0968994fa0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 18.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Full-width rear mudflap Preparation for widening to 3,000 mm (holes in outer frame, not in rear bevel) Low-loader lashing rings 1 pair of lashing cutouts embedded in the front longitudinal beam at the gooseneck, each rated for 10 t 7 pairs of lashing mushroom pins embedded on top and side of the outer frame, each rated for 10 t 1 x on the front gooseneck 5 x in the low-bed area 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated for 5 t (for lashing strap hooks) 5 x at the gooseneck, 6 x in the low-bed area, and 1 x in the rear bevel Drawbar system for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles, brand as per manufacturer’s choice Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 unmistakable coupling heads at the front, with connecting lines to the truck, Rodji Ri Agopfx Abhon Connecting lines extended by approx. 60 cm No ABS, but with mechanical ALB (automatic load-dependent brake valve), thus maximum 60 km/h permit Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm 1 LED beacon with holder, operated via parking light (lamp removable) 2 pairs of illuminated and extendable warning plates up to 3,000 mm Floor Front gooseneck with steel/chequer plate covering Toolbox recessed in the drive-over slant to gooseneck Following area with 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-bed loading area including rear bevel: 5,900 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wooden covering Spring-assisted lifting Operating Instructions For axle loads of 10,000 kg, an exemption permit is required; only indivisible loads permitted!!! The stated total weight is technically possible; depending on the load, the total weight may not be achievable within the allowable axle/support and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle as agricultural/forestry vehicle (LoF), (for Switzerland, max. 40 km/h possible) Prepared for double-line license plate holder No contour markings / reflective tape according to ECE R 048 Painting Frame: DB 7350 Novagrau 10-year corrosion protection warranty Drawbar galvanized or black, according to manufacturer’s choice Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: 6e7907b4000c16661fa1c8a1f, lastna masa: 4.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis – Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front end – patented Without landing gear Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface Tow hook at rear Axles + Suspension SAF disc brake axles Axles/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, activated by 3x braking (traction aid active up to 30% axle overload and max. speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded hoses for easy maintenance Spring-loaded parking brake 2 interchangeable couplings at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractors capable of ensuring ABS functionality! With raise & lower valve Vehicle electronic stability program Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Polished aluminum rims, brand at manufacturer’s discretion Electrics 24 volt, multi-chamber rear lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, no connecting cables Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Operation hydraulic via truck PTO Rjdpei Ri Arjfx Abhsn Body Aluminum box body made from high-grade, wear-resistant alloy; front wall 5 mm thick, external side walls made from 30 mm hollow section profiles, neatly welded, with bulk material-repellent top rail profile. Inside with ladder at front wall (not together with Cramaro system). Shovel and broom holders mounted externally on front wall. Greenline – conical and aerodynamic body shape Membrane – rear wall Rear wall as pendulum flap with double-joint hinge, external, double hook locking. Rear wall with rubber seal. Note: Heat resistant up to max. 170°C! Floor continuous 5 mm thick, Brinell 110. Note: Only suitable for transport of sand, gravel and round aggregate with max. grain size up to 20 mm! Warranty excluded for all other goods! Standing platform with ladder, terminal plate for air/electric connections and brake with large clearance for optimum accessibility. Roll tarp stored on right (FR-right), with central locking on left (FR-left). Operating instructions For salt, lime etc. transports, we recommend a tipping cylinder with hard chrome-plated piston rod to prevent corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while respecting permitted axle, coupling and king pin loads. (Incorrect load distribution may cause poor driving and trailing behavior) Revolution Link: Revolution Link user report: Registration Country / Registration Plates Germany With Dekra inspection and certificate (according to §13 EC – FGV) 24/7 service hotline Prepared for single-line number plate holder Reflective contour markings according to ECE R 048, white at sides, red at rear Paintwork Frame DB 7350 nova gray Body R

Stanje: novo, številka stroja/vozila: 15431365fe5515297a6a9fb05, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Half-shell mudguards on 1st and 2nd axles with antispray mud flaps behind each axle, antispray mud flaps before and after 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points each 5 t located in the excavator arm recess on the side at the main frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, can be locked with a padlock (lock not included) 1 storage box recessed into the floor at the gooseneck, with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm 70 mm timber planks for extension to 3,000 mm Storage compartment for timber planks under the loading platform Lashing eyes (40 securing options) 1 pair lashing eyes on gooseneck, each 5 t 9 pairs lashing mushrooms integrated on top and side of outer frame, each 10 t 2 x on gooseneck to the front 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each 5 t (for tension belt attachment) 3 pairs of additional folding lashing eyes, each 10 t 1 x inside next to the main frame at the beginning of the low-bed 1 x on gooseneck (protruding) 1 x recessed behind the last axle Trailer towing device turntable Drawbar with tested 50 mm towing eye, towing eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum braked axles Rodpfxoi Ri A Ss Abhjn Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) front and rear Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, operated via sidelights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel chequer plate covering Followed by 70 mm softwood floor, wheel arch area with steel chequer plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber overlay Spring-assisted lifting Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for double-line licence plate holder Conspicuity marking with reflective strips according to ECE R 048, white at the side and red at the rear Warning panel according to ECE - 70 Coating Frame hot-dip galvanized incl. passivation, 15-year corrosion guarantee Drawbar galvanized or black, as per the manufacturer's choice Loading ramps hot-dip galvanized Attention! Archive pictures shown!

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Rsdei Ri Dljpfx Abhjn Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: a0a72d14f9b44bce47bc25ffb, konfiguracija osi: 1 os, velikost pnevmatike: 11,5/80-15,3 alliance, Further information Rsdji Ri D Tepfx Abhsn 40 mm towing eye Support leg with wheel Tyres: 11.5/80-15.3 Alliance Without suspension Distance from towing eye to centre of fifth wheel plate: 3,200 mm Tyre load capacity: 5,800 kg at 30 km/h + 5,150 kg at 40 km/h Without road approval, for internal use only!

Stanje: novo, številka stroja/vozila: dd98a7658922be8f2e25bcadb, lastna masa: 2 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 10 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r 17,5, Further information Chassis Central Axle Trailer Low-bed Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel mudguards over both wheels Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension Euro-axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Rodpoi Ri Ebsfx Abhjn Wheels and Tires 235 / 75 R 17.5 (manufacturer’s choice) Factory silver steel rims Braking System 2-line compressed air braking system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connection cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin mistake-proof plugs at the front, including connection cable Body TTS Low-mounted steel trough, bridge floor made of steel/chequer plate covering, steel sidewalls solidly welded to the floor Bridge length 4500 mm; trough at the front and sides with load-lock profile for attaching lashing straps (8 points in front, 12 per side) Note: Slight floor waviness possible due to welding distortion! 2 pairs of lashing rings, one at the corners of the steel trough front and one at the rear floor, each rated 5t 2 additional pairs of lashing rings in the floor, each rated 5t Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps Wooden covering Gas spring assist for one-man operation Operating instructions The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while observing the permissible axle/load and saddle loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline markings with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame RAL 3002 Carmine red Ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: 8e6cf81e11b107f23f22f209a, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19.5, Further Information Rodpfx Aji Ri E Hjbhjn Fine-grain steel welded construction, with preload light pretensioning in the neck area, fifth wheel plate with interchangeable 2" kingpin, outer frame slightly angled new version with load-lock profile for lashing strap attachment, 24-ton 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation. Note: Free landing leg corner dimension or free rear swing radius approx. 1930 mm, extending ladder at rear, door holders on the side, 2 wheel chocks with holders, side underrun protection in aluminum, underrun guard in galvanized steel, quarter shell mudguards in front of the first axle and behind each axle, with anti-spray flaps as per EC regulations, rear impact protection. SAF disc brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, air suspension. 2-line compressed air brake system, color-coded line routing for easy maintenance. Spring-actuated parking brake, 2 mistakable-proof coupling heads at front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve, vehicle stability control system. 435/50 R19.5 tires, brand as chosen by manufacturer, steel rims, factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at front, 2 white/red side marker lights at rear, 2 x 7-pin mistakable-proof sockets at front, without connecting cable. Floor: Phenolic plywood panels approx. 30 mm thick, laid on longitudinal crossmembers for high point load capacity, suitable for forklift axle loads up to max. 7100 kg. Front wall / front corner posts: 2,580 mm high, corner posts in steel, high-volume design, quick-release system for side curtain at front wall, crash blocker, interior lower ram protection in steel approx. 140 mm high. Center posts: 3 pairs of sliding posts movable along the entire length, with 4 stake pockets each and long pocket below, 3 pairs of post positions. Insert slats: 5 rows of wooden slats. Rear wall / rear corner posts: Rear corner posts in steel up to lower roof edge, curtain mounting with round tube and curtain tensioner ratchet, rear portal doors, double-wing, each with 2 internal locking bars. Tarpaulin: Tarpaulin with welded-in horizontal and vertical straps, tension locks in stainless steel. Roof: Sliding roof, rear end lift foldable upwards, roof can be slid from rear to front, L-profile roof beam for automotive industry, interior width between roof beams approx. 2,490 mm, tarpaulin color: white, 400 roof non-elastic, minimal roof beam deflection during loading and unloading, optimal rain gutter at rear, top of the end bow above the doors, EcoLift – lifting roof can be raised by approx. 380 mm, with gas strut assistance, 3 driving positions at front: internal height at front approx. 2,900 mm / 2,950 mm / 3,000 mm, set to approx. 3,000 mm. Germany, type approval as per EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for body strength as per EN 12642 XL, prepared for single-line license plate holder, warning sign as per ECE-70, reflective tape: white, continuous at the lower edge of the side curtain and at the top corners (if visible sideboards, stripe at the bottom of sideboards), reflective tape: red, all around the rear portal. Frame DB 7350 Nova grey, 10-year anti-corrosion warranty, land

Stanje: novo, številka stroja/vozila: a3b1347da4aa7f31dceb875db, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the outer floor/frame, each rated at 5 tons Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell fenders Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Factory silver steel rims Braking System Dual-line air brake system Hand spindle parking brake Integral air reservoir 2 interchange-proof coupling heads at the front with connecting pipes to the towing vehicle Rjdpfx Abji Ri Ilohjn ABS and ALB, ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white front position lights 2 white/red rear marker lights 2 x 7-pin interchange-proof plugs at the front, with connecting cable Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness possible due to welding distortion! Platform length approx. 5,200 mm Rear tapering approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, 320 mm high Side walls 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / corner posts 1 pair of steel stanchions fixed to the frame and with holders for securing the loading ramps, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps wooden inlay with gas strut for one-person operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable within the permitted axle/support/coupling loads. (Poor driving and tracking may result from incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau, 10-year warranty against rust-through Front wall aluminum Side wall anodized aluminum Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: c1946328bb4efe26fccb128ee, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385 / 55 r 22,5, Further Information Chassis Turntable Semi-trailer for Waste Disposal Fine-grained steel welded construction 2 longitudinal beams with cross members, top side of the longitudinal beams designed as a container roller track in wear-resistant design, rear-loadable, with run-up ramp. Suitable for roll-off containers with a length of 6.5/7.0 m. Container Locking System: - 2 pairs of locking hooks recessed into the floor - Pneumatic actuation The container locking system is a 2-point design acting internally; locking of roll-off containers with an internal strut is not possible (for transporting roll-off containers with subframes according to DIN 30722). Turntable with robust slewing ring Wheel chocks with holders Side underride protection, aluminium Rear underride protection, steel Half-shell mudguards Drawbar equipment for turntable trailer Drawbar with tested 40 mm towing eye Axles + Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Wheels and Tires 385/55 R 22.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Immobiliser: When container locking is open, the spring-loaded parking brake is activated Vehicle – Driving Stability System 2 reverse-polarity safe coupling heads at the front, with connecting lines to the truck EBS, Electronic Braking System with EBS plug at the front and connecting cable Note: The trailer may only be towed by vehicles that guarantee effective ABS operation! With lift and lower valve Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin reverse-polarity safe plugs at the front, with connecting cable Registration/Country Plates Registration country: Germany With DEKRA inspection and certificate (according to §13 EC – FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey, 10 years warranty against corrosion perforation Redpfsi Ri Nmox Abhjn Drawbar KTL black Note: Archive images!

Stanje: novo, številka stroja/vozila: b6e633155abf971a017e4b53b, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385 / 55 r 22,5, Further Information Rjdpfx Absi Ri Nqehon Chassis Turntable Trailer Disposal Fine-grained steel welded construction Carriage: The container is placed on the carriage from the rear and pushed forward, front container stop adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with external roller. Container Locking: - 2 pairs of locking hooks recessed in the floor - Pneumatic actuation The container lock is of 2-point design, operating from the inside, and locking containers with internal crossbars is not possible. Turntable with robust ball bearing slewing ring Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Half-shell fenders Rear impact protection vertically on left and right, with delta rubber on rear underrun holder Turntable trailer coupling device Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension with raise & lower valve Wheels and Tires 385 / 55 R 22.5 Manufacturer's choice Steel rims factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Immobilizer: When the container lock is open, the spring-loaded parking brake is activated Vehicle Stability System 2 interchangeable coupling heads at the front, with connection lines to the towing vehicle, EBS electronic braking system with EBS plug at the front, with connection cable Note: The trailer may only be towed by tractors that ensure effective ABS function! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 additional LED work lamp at the rear, switched via reverse light 2 x 7-pin interchangeable plugs at the front, with connection cable Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tapes according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Drawbar KTL black Note: Archive images!

Stanje: rabljeno, številka stroja/vozila: 7e3bf6da9bda95b470a3b0a97, lastna masa: 5.340 kg, največja dovoljena obremenitev: 12.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2021, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2021, Additional Information Chassis Central Axle Trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at the front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Mudflaps in front of each axle and anti-spray mudflaps behind each axle 1x spare wheel holder for 1 E-wheel, with wheel fixing kit 1x spare wheel, same brand as main tyres, steel rim 1x stainless steel toolbox, width=600 / height=400 / depth=500 mm, with polished door, lockable Lashing eyes on low loader 5 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) 7 pairs of lashing mushrooms recessed in the top and side of the outer frame, each rated at 10 t 2 additional pairs of folding lashing eyes recessed in the low bed area, each 10 t – 1 pair at the front and 1 pair at rear incline Central axle trailer drawbar assembly Drawbar with tested 50 mm towing eye Axles and Suspension SAF drum brake axles Axle/chassis laser alignment reduces tyre and fuel consumption Axle spacing 1810 mm (with 10 t axle load technical rating) Air suspension Brake system 2-line compressed air brake system, color-coded lines for easy servicing Rsdpfx Abep N Dgushsn Spring-loaded parking brake Duomatic coupling at the front with connection to truck EBS, Electronic Braking System with EBS connector at the front and connecting cable Note: This trailer may only be towed by vehicles that ensure correct ABS function! With lift and lower valve Vehicle driving stability system Axle load detection via EBS CAN bus signal for display in driver’s cab – truck must be pre-equipped accordingly, not for trucks not fitted (not a calibrated scale) Wheels and Tyres 235/75 R17.5 make Fulda Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED marker lights 2 white position lamps at front 2 white/red track marker lamps at rear 1 x 15-pin connector at front with connection cable 1 additional LED work lamp at rear, switched with reverse light 1x LED beacon with bracket, switched with parking light (removable lamp) Floor Then fitted with 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear incline with Mega Grip anti-slip grating Low-bed area including rear incline 6500 mm Front bulkhead / corner posts 25 mm aluminium box section, 400 mm high, removable Ramps Steel ramps 3600 mm long, 750 mm wide, split and tensioned with cable pull, laterally adjustable Ramp adjustment, minimum spacing approx. 600 mm, maximum outer width approx. 2880 mm Ramp surface with Mega Grip anti-slip grating Hydraulic operation via dedicated electro-hydraulic unit mounted in a steel box, controls on right-hand side. Note: NATO socket with connection cable required on truck. Connection cable must not be attached while driving! Hydraulic lateral adjustment of ramps, individually controllable (only in combination with hydraulic ramp operation) Operating Instructions The specified gross weight is technically possible, but depending on the cargo the maximum gross weight may not be achievable while adhering to permitted axle, support and kingpin loads. (Incorrect load distribution may cause poor driving and tracking behavior) A special permit is required for 10,000 kg axle load. The permit must be applied for individually in each federal state; there is no guaranteed legal right to approval for 20 t gross weight. Customer assumes risk.