Tandem trailer

Fliegl Tandem-Tiefbett-Anhänger TTS 100 - 5,5m

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.200 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 6.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized individually per customer request. Chassis: Central axle trailer, low-bed Fine grain steel welded construction Gear support leg at front Telescopic rear support 2 wheel chocks with holders Steel mudguards covering both wheels Side underrun protection in aluminium Drawbar assembly for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles “Axle/chassis laser alignment” reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235 / 75 R 17.5” Manufacturer’s choice Factory silver steel rims Brake System Dual-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle 24V ABS and ALB system, ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the ABS system is operational! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red lane indicator lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Platform TTS Low-positioned steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor Platform length: 4,500 mm Front and side “Load-Lock” profiles for strap attachment (Front: 8 points; each side: 12 points) Note: Minor floor undulation due to welding distortion is possible! 2 pairs of lashing eyes: 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With carry handle on the ramps Wooden covering (ramp tip with chequer plate steel) Gas pressure springs for single-person operation Operating notes The specified gross weight is technically possible; depending on the load, the permissible axle/support/kingpin loads may limit the actual gross weight. (Poor handling and tracking can result from incorrect load distribution) Country of registration / Number plates Country of registration: Germany Includes Dekra inspection and report (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective tape to ECE R 048, white on the sides, red at the rear Paintwork Frame painted or galvanized according to customer preference Loading ramps hot-dip galvanized Tailor-made transport solution Cedpji Ri Ebofx Afwjri Configure your Fliegl vehicle to meet your requirements. The example vehicle shown serves as a sample. Production and equipment are tailored individually to customer requirements.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.520 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 7.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customised based on customer specifications. Chassis Central Axle Lowbed Trailer Fine-grain steel welded construction Gear support foot at the front Telescopic rear support 2 wheel chocks with holder Steel mudguards covering both wheels With anti-spray mudflaps only on the last axle Side underrun protection in aluminium Transverse stop at front, insertable into floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balancing (rocker compensation) Wheels and Tyres 235 / 75 R 17.5" manufacturer's choice Steel rims, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit Power sockets for electrics, ABS/EBS and air connection at the towing fork or drawbar 24-volt EBS electronic braking system with EBS plug at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! "TPMS" Tyre Pressure Monitoring System according to ECE R 141, display via in-cab monitor through EBS Electrics 24-volt system, multi-chamber LED taillights, side amber LED lighting, LED licence plate lighting Side amber LED lighting connected to indicators (side marker lights blink) 2 white position lights at the front (LED) 2 white/red lane departure lamps at the rear (LED) Premium LED side marker lights, each with 20 LEDs per unit 2 x 7-pin non-interchangeable plugs at the front with connection cables Platform Low-profile steel trough, platform floor from steel/chequer plate, steel sides and floor robustly welded Platform length 5,500 mm Trough with "Load-Lock" profile at front and sides for lashing straps (8 at front, 16 per side) 2 pairs of lashing eyes: 1 at the front corners of the steel trough, 1 at the rear in floor, each rated 5 t 3 additional pairs of lashing eyes in the floor, each rated 5 t 4 pairs of lashing eyes screwed onto sidewalls Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With hand grip on the ramps Timber-covered (tread area covered with steel/chequer plate) With gas strut for one-man operation Rear Wall / Rear corner posts Plywood board, 400 mm high, plug-in, positioned between ramps Operating Instructions The total weight specified is technically achievable. Depending on the cargo, the total weight may not be attainable due to statutory axle, support, and kingpin loads Registration / Signage Registration country: Germany Approval according to EC 2007/46 Prepared for single-line number plate holder Conspicuity marking with reflective tape in accordance with ECE R 048, white on sides, red on rear Csdpfx Afozcnugswjri Warning sign according to ECE - 70 Customised Transport Solution