Flex 5 Aggregat nakup rabljenega (23.504)

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Knedpfx Aexcdfajh Aof Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, Leto izdelave: 1999, premer žaginega lista: 500 mm, Dvojna kotna žaga Emmegi, letnik 1999, z elektronskim upravljanjem, leva stran fiksna. Premer žaginega lista 500 mm, na voljo od marca 2026. Knjdjx Ndagjpfx Ah Aef

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 Knedpjwk Hp Tefx Ah Aef - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: novo, Siemens 6FC9320-2BC resolver measuring gear DM 2 / 150 i = 1 : 5 < unused > 100% functional Kedpfx Ahoi Ed Hke Aonf

Leto izdelave: 2006, obratovalne ure: 79.000 h, Stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Gear cutter, module cutter, hobbing cutter, gear form cutter, module cutter head, cylindrical side milling cutter, cylindrical cutter, milling cutter, gear hob, spline shaft hob - Diameter: 63 mm - Height: 40 mm - Bore: 22 mm - Quantity: 2x cutter locating discs 650.054.06A SPAN. 5° EV4CO Knodpsb A Rcgefx Ah Asf - Price: for the complete set - Sale: only as a complete set - Weight: 1.5 kg

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg Kjdpfxexcdf To Ah Ajnf As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, Leto izdelave: 1977, Pressure 30 t Outreach 110 mm Stroke 50 mm Strokes per minute 35 - 80 /min Clearance between body walls 170 mm Installation height 230 mm Table surface 410 x 260 mm Table height above floor 790 mm Ram surface 190 mm Ram adjustment 35 mm Drive power 1.0 x 1.1 x 1.8 kW Weight 1.3 t Only approved for use with safety tools or fixed guards in accordance with German accident prevention regulations (UVV) Knedpfx Asvuugpeh Aef with motor-driven knuckle-joint system, pneumatic friction disc clutch and brake, manual ram adjustment, mechanical ejector in table, fixed table, automatic centralized oil lubrication, foot operation as-is, WITHOUT being put into operation – Video from the seller available prior to disassembly

Stanje: rabljeno, Leto izdelave: 1989, Štiristranski skobeljni stroj FUTURA ROTOMAT 220/5 s peto rezkalno gredjo Leto izdelave: 1989 Kodpfx Ahsxx Tb Ns Ajnf Cena Ex Works

Stanje: pripravljen za uporabo (rabljen), Groschopp WK 1735309 gear motor with brake, serial no. 9019059, equipped with gearbox VE 31-K-R-31, gear ratio i = 5; mounting hole spacing: 46 x 46 mm; drive shaft diameter: 10 mm. Used, minor signs of wear, fully functional. Delivery as shown in photos. Ksdpfji D H U Tex Ah Ajnf

Stanje: rabljeno, Offer consisting of: Ring eye conversion kit without leaf springs for bolster heads 48/5 Ksdpsu Srfnefx Ah Ajnf Upon request, we can organize the following for you: Packaging, loading, transport (by ship or airplane) including customs clearance Obtaining a leasing offer

Stanje: rabljeno, Détails techniques : Course X : 500 mm Course Y : 380 mm Course Z : 330 mm Commande : Siemens 840 D / 810 D Cône de broche ISO, vertical/horizontal : 40 Surface de serrage de la table : 400 x 800 mm, fixe Vitesses de broche, sans paliers, vertical/horizontal : 35–1800 tr/min Tête de broche orientable à gauche et à droite : 90° Avance rapide X, Y : 3,15 m/min Avance rapide axe Z : 1,6 m/min Avance, sans paliers, X/Y/Z : 6,3 – 1250 mm/min Puissance totale requise : 7,4 kW Poids de la machine env. : 1,8 t Dimensions machine (LxlxH) env. : 1,8 x 2,2 x 1,8 m Dimensions armoire électrique (LxlxH) : 0,5 x 0,85 x 2,1 m La machine a été modernisée en 2002 avec une commande Siemens 840D/810D ShopMill moderne. - Course de réglage avec coulisse de contre-palier : 440 mm Ksdou Nc R Nopfx Ah Ajnf Équipement : - Système de refroidissement - Pupitre de commande avec bras pivotant Accessoires : - Divers pinces de serrage - Divers porte-outils SK 40 - Divers porte-fraiseurs selon disponibilité.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1977, Takoj na voljo iz lokacije: Hidravlični nihajni upogibni stroj Köllschen Tip AM 2500/5 Letnik izdelave 1977 Dolžina upogibanja: 2550 mm Debelina materiala: 5 mm Kjdpfx Aox Ihdmoh Aenf Zadnji prislon Dodatne nove upogibne letve Pogon: 7,5 kW Teža: 5 t Cena: 3.750 € + DDV, iz lokacije.

Stanje: dober (rabljeno), Manual lever shear, long-blade sheet and round steel shear, sheet metal shear - Manufacturer: Peddinghaus Sheet and Round Steel Shear Type 1 BR 5 - Sheet steel: up to 5 mm - Round steel: up to 11 mm - Blade length: 150 mm Knsdefgi Nqjpfx Ah Ajf - Lever arm with safety spring - Quantity: 2x lever shears available - Price: per piece - Dimensions: 275/100/H1180 mm / 280/100/H934 mm - Weight: 11 kg each

Stanje: zelo dobro (rabljeno), TORNOS DT 26/5 je CNC avtomatski stružni stroj za natančnost, visoko točnost in zanesljivost. 5+2 osi, 2 vretena, dolžina obdelovanca 195 mm, premer palice 25,4 mm; 2 revolverska nosilca orodij, 22 postaj, 4 stružna/4 vrtalna orodja. Vreteno 0–10.000 min⁻¹, 8,2 kW (kontra vreteno 8,2 kW); pogonska orodja 5.000 min⁻¹, 1 kW. Hitri pomik 32 m/min; teža ≈2400 kg; dimenzije D2912׊1300×V1720 mm. Oprema: podajalec palic Top Automazioni, visokotlačno hlajenje 20 bar, centralno mazanje, svetilka za stanje stroja. Omogoča ozke tolerance; panoge: avtomobilska industrija, urarstvo, orodjarstvo, letalska industrija, medicinska tehnologija. Knedpsxx U Spjfx Ah Aof

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3+5) 8-axle hydraulic swing BPW axle assembly with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), consisting of 4 heavy-duty modules with removable gooseneck, extendable up to 5 m telescopic excavator low-bed with 4 wheel recesses, ABS, payload up to 175,620 kg (technically possible). Comprising the following 4 individual heavy-duty module components: Knedpfx Ahexx Evfe Aof 1st Module: Hydraulic universal gooseneck, Type STH - Can be combined with heavy-duty platform modules and drive-over loading decks - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - 3.5" king pin - Detachable aluminium side walls - Fully hydraulically manoeuvrable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty module - As single module: technically permissible total weight: 108,000 kg (axle loads up to 36,000 kg at 5 km/h) - Unladen weight: 10,350 kg - Technical payload as single module: 97,650 kg at 5 km/h - 8-fold hydraulic pendulum axles, 215/75/R17.5 tyres - Axle load: up to 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Dual-circuit hydromechanical all-wheel forced steering (max. axle steering angle 60°) with integrated hydraulic tank - Optimised front/rear pin-plate coupling for longitudinal combination - Single-tyre pendulum axles, 8 wheels per axle line - Hydraulic axle compensation: ±300 mm, hydropneumatic suspension with gas pressure accumulator - Hydraulic steering of all axles - BPW axles with drum brakes and ABS, nominal axle load: 34 t at 5 km/h 3rd Module: Extendable heavy-duty low-bed/excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m (length) x 3.00 m (width), loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extendable module at the front section - Total height in wheel recess area: approx. 150 mm - Load capacity: up to 80 t on the low-bed, up to 175.6 t in full STHP 8 (3+5) configuration - Front and rear hydraulic bolt-plate couplings with claw adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg; axle loads: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tyre hydraulic pendulum axles, 4 wheels per axle line, tyres: 20 x 285/70 R 19.5 - Hydraulic axle compensation: ±300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering on all axles - Radio remote control for steering axles Notes: - Up to 3 different train combinations possible with the 4 heavy-duty modules; payloads vary according to configuration - The low-bed can be viewed and tested at our premises - Current Goldhofer manufacturer’s certificate for special low-bed combination available Price: NET, plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal reference number: 2285 Advert also available in complete German / Inserat auch komplett in Deutsch verfügbar

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Stroj za profiliranje parketa za vzdolžno stran 5+5 motorjev Kedpfxsxwnhbs Ah Asnf Hitrost do 60 m/min Minimalna delovna širina 70 mm Diamantno orodje za T&G profil + dovodni trakasti transporter

Leto izdelave: 2019, Stanje: zelo dobro (rabljeno), Double-head automatic saw for cutting aluminium and PVC profiles, featuring electronic control and pneumatic tilting of the heads. Equipped with a virtual axis for the tilting of the saw heads. Cutting length: 5000 mm Control: Electronic with automatic movement of the mobile head Head tilting: Pneumatic, with adjustable angles (range from 90° to 45°). Manual head adjustment for additional angles down to 20°30’. Additional features: Hydropneumatic blade feed, profile clamping Kodjwwtwqspfx Ah Aonf

Stanje: rabljeno, prevoženi kilometri: 224.000 km, moč: 96 kW (130,52 KM), prva registracija: 11/2020, vrsta goriva: dizel, skupna masa: 3.400 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 2.825 mm, širina tovornega prostora: 1.230 mm, višina nakladalnega prostora: 1.210 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Special Equipment: Docking station (MyFord Dock), vehicle without vinyl flooring in the cargo/passenger compartment, 240 A alternator, LED cargo area lighting, smoker’s package, sliding door on the left in the cargo/passenger compartment, start/stop system, AGM battery 80 Ah (2 batteries) Knedpfjvralljx Ah Asf Additional Equipment: Driver’s airbag, traction control system (ASR), audio system: radio with USB and Bluetooth hands-free system, indicators integrated in exterior mirrors, onboard computer, entry lights, electronic brakeforce distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, lockable glove compartment, rear wing doors without windows (opening angle 180 degrees), interior pollen filter, body/build: high roof van, body variant: medium high roof, high partition wall behind driver and passenger without window with lower through-loading option, adjustable steering column (height and length), truck registration, model update, engine 2.0 L - 96 kW TDCi KAT, parking pilot system, front and rear parking sensors, wheelbase 3300 mm, full-size spare wheel, low emissions according to Euro 6d-TEMP, leather gearshift/selector lever, adjustable interval wipers, H4 headlights, right side sliding door in cargo/passenger compartment, mud flaps front and rear, Visibility Package 2, Seat Package 13: driver’s seat (4-way adjustable), double passenger seat, fabric, Seat Package 25: driver’s seat (4-way adjustable), double passenger seat in velour, steel wheels 6.5x16, partially painted bumpers, style color package, LED daytime running lights, Trend, tinted glazing, half-height lining in the cargo/passenger area, side lashing rails in the cargo area, 8 lashing points, lightly tinted heat-insulating glass. Cooling system: Special equipment: PHARMATRANSPORT System: Transcool Multitemperature With 3 compartments: -30°C, +22°C, +4°C Standby cooling 220V Payload: 700 kg Vehicle is in good condition! This is a take-away price without TÜV (without technical inspection).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 18.800 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 530 mm, pomik po osi Z: 630 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain iTNC 530, širina mize: 1.150 mm, dolžina mize: 560 mm, obremenitev mize: 700 kg, skupna masa: 7.800 kg, največja hitrost vretena: 10.000 obr/min, delovne ure vretena: 3.600 h, število mest v zalogovniku orodij: 30, dolžina orodja: 250 mm, teža orodja: 6.000 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, incl. Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Equipped with M&H probing system / tool measurement, 1x POSfix 100mm vise (see left), 1x quadruple clamping system (see center) 30 tool stations in the magazine, SK40 taper. Internal coolant supply, air through spindle, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, significantly fewer hours on the Lehmann 4th/5th axis. Inspection under power is possible (almost) anytime by appointment. Single-user operation (the machine was exclusively operated by myself). Reason for sale is a private accident about two years ago. For further questions and optional accessories regarding the machine and the Lehmann 4th/5th axis, I am happy to assist you. Kjdpfsxzhfnox Ah Aonf Note: LANG clamps and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for illustration purposes only!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Separator iz podjetja trio-technik je naprodaj. Naprava je zasnovana za ločevanje predmetov različnih geometrijskih oblik. Dolžina: 950 mm Širina: 700 mm Nastavljiva višina: 700–1380 mm Možna širina reže: 50 mm Naklonski kot: max. 20° Knedpfx Ajx Dm Rzsh Ajf Pogon/trifazni tok: 400 V 50 Hz Poraba energije: 0,09 kW/h Možnost nastavitve hitrosti.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3+5) 8-axle hydraulic swing BPW axle assembly with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), consisting of 4 heavy-duty modules with removable gooseneck, extendable up to 5 m telescopic excavator low-bed with 4 wheel recesses, ABS, payload up to 175,620 kg (technically possible). Comprising the following 4 individual heavy-duty module components: 1st Module: Hydraulic universal gooseneck, Type STH - Can be combined with heavy-duty platform modules and drive-over loading decks - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - 3.5" king pin - Detachable aluminium side walls - Fully hydraulically manoeuvrable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty module - As single module: technically permissible total weight: 108,000 kg (axle loads up to 36,000 kg at 5 km/h) - Unladen weight: 10,350 kg - Technical payload as single module: 97,650 kg at 5 km/h - 8-fold hydraulic pendulum axles, 215/75/R17.5 tyres - Axle load: up to 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Dual-circuit hydromechanical all-wheel forced steering (max. axle steering angle 60°) with integrated hydraulic tank - Optimised front/rear pin-plate coupling for longitudinal combination - Single-tyre pendulum axles, 8 wheels per axle line - Hydraulic axle compensation: ±300 mm, hydropneumatic suspension with gas pressure accumulator - Hydraulic steering of all axles - BPW axles with drum brakes and ABS, nominal axle load: 34 t at 5 km/h 3rd Module: Extendable heavy-duty low-bed/excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m (length) x 3.00 m (width), loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extendable module at the front section - Total height in wheel recess area: approx. 150 mm - Load capacity: up to 80 t on the low-bed, up to 175.6 t in full STHP 8 (3+5) configuration - Front and rear hydraulic bolt-plate couplings with claw adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg; axle loads: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tyre hydraulic pendulum axles, 4 wheels per axle line, tyres: 20 x 285/70 R 19.5 - Hydraulic axle compensation: ±300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering on all axles Knsdsxxv Rmepfx Ah Asf - Radio remote control for steering axles Notes: - Up to 3 different train combinations possible with the 4 heavy-duty modules; payloads vary according to configuration - The low-bed can be viewed and tested at our premises - Current Goldhofer manufacturer’s certificate for special low-bed combination available Price: NET, plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal reference number: 2285 Advert also available in complete German / Inserat auch komplett in Deutsch verfügbar

Stanje: rabljeno, Cooling water pump Manufacturer: Grundfos Type: SK 4 -15/5 Speed: 2840 rpm Flow rate: 40 - 80 litres Delivery head: 27 - 18 metres Kodpfx Asc Unydjh Asnf

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Dvoglava žaga s 3 krmiljenimi osmi za aluminij, PVC in lahke zlitine z avtomatskim premikom gibljive glave in elektronskim upravljanjem vseh kotov od 45° (notranjih) do 15° (zunanjih), z natančnostjo do 280 položajev na stopinjo. Kodpjxqdu Defx Ah Ajnf

Stanje: rabljeno, prevoženi kilometri: 389.755 km, moč: 265 kW (360,30 KM), prva registracija: 03/2015, vrsta goriva: dizel, lastna masa: 12.950 kg, največja dovoljena obremenitev: 5.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, medosna razdalja: 5.200 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, kabina, klimatska naprava, meglenke, parkirni grelec, servovolan, spojka prikolice, tempomat, zapora diferenciala, žerjav, * German vehicle * First owner * Complete documentation and crane inspection booklet available * Palfinger PK 15001L Performance rear-mounted crane Kedpfjvhqfuex Ah Aonf * Maximum crane reach: 15.10 meters * 5th and 6th hydraulic control circuits * Grapple control * Lifting capacities: 11.10m = 1,060 kg | 8.80m = 1,350 kg | 4.90m = 2,760 kg | 2.00m = 5,900 kg * 3 fully hydraulic extensions / crane * 2 hydraulic outriggers * High seat control * Palfinger stone grab available for an additional charge * Platform dimensions: L = 5,600 mm | W = 2,450 mm | H = 1,000 mm * Aluminum side boards * Spring flaps * DIN lashing rings and rails * Trailer hitch * Towing capacity: 24,000 kg * Air suspension with lift/lower function * L-cab * Auxiliary heater * Air conditioning * Air-suspended comfort driver’s seat * Heated seat * Multifunction steering wheel * Cruise control * Radio * Electric windows * Heated and electrically adjustable exterior mirrors * Electric engine brake * ESP / ABS * Bluetooth phone system * Tool/storage box * Wheelbase: 5,200 mm * GVWR: 18,000 kg * Curb weight: 12,950 kg * Payload: 5,050 kg If a new technical inspection (TÜV) is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website under: We speak the following languages: German, English, Polish, Turkish Note: We offer and expressly recommend viewing and inspecting the goods to ensure that no misunderstandings arise regarding their condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.