Ess Uniarc 5 nakup rabljenega (68.296)

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 14 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, skupna širina: 1.500 mm, skupna dolžina: 3.000 mm, skupna višina: 2.500 mm, pritisk: 2.800 letvica, obratovalni tlak: 2.800 letvica, gorivo: dizel, skupna masa: 3.000 kg, vrtljajska hitrost (min.): 700 obr/min, največja hitrost vrtenja: 1.500 obr/min, dolžina visokotlačne cevi: 60.000 mm, leto zadnje generalne obnove: 2025, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Lot of 5 UHP Water Jetting Units, with extensive spare parts and accessories as follows: 1 x High-Pressure Water Jetting System with Deutz-MWM V-8 diesel engine Continuously adjustable pressure from 0–1400 bar and 0–2800 bar, overflow/dump system, equipped with interchangeable piston sets for the following capacities: - 1400 bar at 99 liters/minute - 2800 bar at 46 liters/minute The high-pressure head (with sleeves and valves) remains unchanged for both 1400 and 2800 bar pressure stages. Pressure stage switch between 1400 and 2800 bar is achieved simply by changing the pistons. The unit was built in 2013 and kept in service as a backup machine, but was only used once for 14 hours at 2800 bar for a heat exchanger cleaning project. This UHP machine is mounted on a galvanized steel frame. The Deutz-MWM engine was purchased second-hand with approximately 3,000 operating hours and was equipped with a new Jetech UHDW high-pressure water jet pump in 2013. Additionally, there is a large quantity of accessories and spare parts included, such as dump guns & foot valves, swivels, rotary joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP water jetting unit is also available, but fitted with a Scania V-8 engine and 850 operating hours at max. 1400 bar / 99 liters/minute. This unit also includes piston kits for both 1400 bar / 99 l/min and 2800 bar / 46 l/min. The system is housed in a 20-foot container with an 800-liter diesel tank, workbench, and vise. Additionally, 3 more high-pressure water jetting systems are available, each rated at 110 kW; 2 units are equipped with interchangeable piston kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 bar operating pressure. Also available is a hydraulic heat exchanger cleaning device with a rotating lance, mounted on a scissor lift table, suitable for very large heat exchangers. Rjdoxc E Tropfx Ad Tobt All equipment is being sold due to the closure of my business following my retirement. A buyer is sought for all machines and accessories as a complete package. Price for the entire lot: €150,000 (pickup only) in D-36404 Vacha, Germany. Domestic delivery possible for an additional charge.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Avtomatska hidravlična stiskalnica Automax ES5-3000 z močjo 3000 kN za tlačne preizkuse, v odličnem stanju. Namenjena delu s kockami do mere 200 mm in valji s premerom do 160 mm ter višino do 320 mm. Opremljena z zunanjim okvirjem za upogibne teste z močjo 100 kN. Leto izdelave: 2005. Rbodpfx Aexpcuyjd Tjt

Leto izdelave: 1993, Stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau Vulcanizing Press Year of manufacture: 1993 Machine no.: 2758 Press force: 2,800 kN Heating plates: 500 x 500 mm Heating: electric Plate opening: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Including sliding table, vacuum pump, vacuum chamber, storage tank Rbodpfx Ajn Sm A Sjd Tjt In good used condition. With CE marking.

Leto izdelave: 1990, Stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau vulcanizing press Year of manufacture: 1990 Machine no.: 2559 Pressing force: 2800 kN Heating plates: 500 x 500 mm Heating: electric Plate gap: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Rodpfx Asn Sm Aysd Tebt Includes sliding table, vacuum pump, vacuum chamber, storage tank Good used condition. With CE marking.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SVC5003396, merilno območje os X: 500 mm, merilno območje osi Y: 450 mm, merilno območje os Z: 300 mm, Oprema: dokumentacija / priročnik, Stroj je bil avgusta 2022 servisiran pri proizvajalcu! TEHNIČNE PODROBNOSTI Merilno območje os X: 500 mm Merilno območje os Y: 450 mm Merilno območje os Z: 300 mm Rsdpfx Asyaq Hyod Tsbt Skupno merilno območje: 500 x 450 x 140 mm OPREMA Dokumentacija/priročnik Kalibracijska krogla Različni podaljški tipala Trojni sistem menjave tipal Renishaw Trening kos ZONE3 Programska oprema Metrology

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Številka zaloge: 9722 Rsdpfxswiqpbe Ad Tebt Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Cena: 16.600 € Leasing obrok: 318,72 € Na zalogi: 1 Dolžina upogibanja: 2050 mm Maksimalna kapaciteta upogibanja - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 130 mm Hitrost valjanja: 3,5 m/min Moč motorja: 2,2 kW Dolžina: 3200 mm Širina: 750 mm Višina: 1000 mm Teža: 1500 kg 3 valji Asimetrična postavitev valjev - z predupogibanjem 2 pogonska valja z zavornim motorjem KALJENI VALJI ročno pomikanje stranskih valjev Zgornji valj se lahko izklopi naprej Tek naprej/nazaj Stožčasto valjanje z nastavkom zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI MOŽNOSTI: (Dobavni rok z možnostmi približno 8 tednov) motorno pomikanje stranskih valjev digitalni prikaz položaja stranskih valjev

Stanje: novo, Leto izdelave: 2026, Stanje novo Leto izdelave 2026 Inventarna številka 070153 Dobavni rok takoj, vmesna prodaja možna Država izvora Turčija Cena 4.800 € Na zalogi 1 kos Teža koluta 500 kg Maks. zunanji premer koluta 1200 mm Min. notranji premer koluta 400 mm Maks. notranji premer koluta 550 mm Maks. širina koluta 300 mm Min. širina koluta 50 mm Min. širina koluta pri izvedbi s pnevmatsko pritisno roko 80 mm Motor 0,55 kW Dolžina 1400 mm Rbodpfxswirz Ss Ad Tet Širina 1200 mm Višina 1550 mm Teža 190 kg Motorni pogon Mehansko nastavljiv kolutni trn s 4 čeljustmi Regulacija hitrosti premikanja, nastavitev časa pospeševanja in zaviranja Fotoelektrični bližinski senzor SICK za nadzor ugreza

Stanje: novo, Leto izdelave: 2026, Stanje: novo Leto izdelave: 2026 Št. zaloge: 070155 Dobava: takoj, vmesna prodaja mogoča Država izvora: Turčija Cena: 6900 € Leasing obrok: 133,17 € Na zalogi: 1 Teža navitja (coila): 500 kg Najv. zunanji premer navitja: 1200 mm Min. notranji premer navitja: 400 mm Najv. notranji premer navitja: 550 mm Najv. širina navitja: 300 mm Min. širina navitja pri različici s pnevmatskim pritisnim krakom: 80 mm Dolžina: 1450 mm Širina: 1200 mm Višina: 1640 mm Teža: 260 kg Pogonski motor Rodpowirmujfx Ad Tobt Mehansko nastavljiva navijalna gred s 4 čeljustmi Regulacija hitrosti odvijanja kot tudi časa pospeševanja in zaviranja Fotoelektrično bližinsko stikalo SICK za nadzor povesne zanke PNEVMATSKA NAPENJALNA ROKA

Stanje: novo, Leto izdelave: 2025, Stanje novo Leto izdelave 2025 Številka zaloge 090120 Dobavni rok takoj, vmesna prodaja mogoča Država izvora Turčija Cena 7100 € Leasing rata 137,03 € Bestseller 1 Na zalogi 1 Rodpfxjwira Io Ad Tjbt Upogibna dolžina 1050 mm Maks. upogibna zmogljivost – konstrukcijsko jeklo 3 mm Premer zgornjega valja 90 mm Hitrost valjanja 6 m/min Moč motorja 1,1 kW Dolžina 1630 mm Širina 700 mm Višina 1200 mm Teža 480 kg 3 valji Asimetrična razporeditev valjev 2 pogonska valja z zavoro Pogonski zadnji valji z ročnim kolesom Žlebovi za vstavljanje žice na spodnjem in zadnjem valju KALJENI VALJI Zgornji valj izmetljiv Desno/levo smer z dvojnim nožnim stikalom Naprava za konično valjanje Navodila za uporabo v NEMŠČINI

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrags Ursprungsland Türkei Preis 39400 € Leasingrate 628.39 € Sonderpreis 32900 € Biegelänge 2050 mm Max. Biegekapazität - Baustahl 10 mm Max. Blechstärke ohne Anbiegung - Baustahl 10 mm Max. Blechstärke mit Anbiegung - Baustahl 8 mm Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze 10 mm Redpsyb S Arsfx Ad Tebt Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwal 8 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalzen 8 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalz 6 mm Oberwalzendurchmesser 200 mm Unterwalzendurchmesser 200 mm Seitenwalzendurchmesser 180 mm Rollgeschwindigkeit 6 m/min Länge 3850 mm Breite 1350 mm Höhe 1290 mm Gewicht 3750 kg Motorischer Walzenantrieb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH OPTIONEN: Topsupport Seitensupport Variable Geschwindigkeit NC Steuerung

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrag Ursprungsland Türkei Preis 34.900 € Leasingrate 555,81 € Sonderpreis 29.100 € Biegelänge 2.050 mm Max. Biegekapazität - Baustahl 8 mm Max. Blechstärke ohne Anbiegung - Baustahl 8 mm Max. Blechstärke mit Anbiegung - Baustahl 6 mm Rbsdjyb S Afepfx Ad Tot Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze 8 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwalze 6 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalze 6 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalze 4 mm Oberwalzendurchmesser 180 mm Unterwalzendurchmesser 180 mm Seitenwalzendurchmesser 150 mm Rollgeschwindigkeit 5 m/min Länge 3.850 mm Breite 1.350 mm Höhe 1.290 mm Gewicht 3.300 kg Motorischer Walzenantrieb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rbodpfx Ajyb Sz Ied Tjt Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Leto izdelave: 2024, Condition: New Year of manufacture: 2024 Stock number: 9729 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €28,450 Leasing rate: €488.96 Stock: 1 Special price: €25,600 Bending length: 1,550 mm Max. bending capacity (mild steel): 7 mm Max. sheet thickness without pre-bending at D=5x upper roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x upper roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x upper roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x upper roller: 3.5 mm Upper roller diameter: 150 mm Lower roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Upper roller driven by hydraulic motor and planetary gearbox, lower roller driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of upper roller Hydraulic opening bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE regulations OPTIONS: Rbodpfx Aeyb Szhsd Tot (Delivery time for options approx. 10 weeks) Continuously variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: Maximum sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of the roller width Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Rsdpfx Asyb Szbjd Tjbt IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Rbedpfsyb Sy Rjx Ad Tet Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrags Ursprungsland Türkei Preis 26300 € Leasingrate 502,33 € Biegelänge 2050 mm Max. Biegekapazität - Baustahl 4 mm Rbedpfxoyb Sy Dj Ad Tet Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze 4 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwal 3 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalzen 3 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalz 2 mm Oberwalzendurchmesser 130 mm Unterwalzendurchmesser 130 mm Seitenwalzendurchmesser 130 mm Rollgeschwindigkeit 5 m/min Motorleistung 2,2 + 1,1 kW Länge 3800 mm Breite 1150 mm Höhe 1110 mm Gewicht 2450 kg Motorischer Walzenantrieb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH OPTIONEN: Topsupport Seitensupport Variable Geschwindigkeit NC Steuerung

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,600 kg Rbsdpfoyb Sywjx Ad Tst 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Rbsdpfsyb Sykox Ad Tet Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Rbjdpfxoyb Sydo Ad Tet Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness, pre-bending at D=5x top roll: 13 mm Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE specifications OPTIONS: Stepless variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: delavnici obnovljeno (rabljeno), HIDRAVLIČNA TOPLA STISKALNICA 25×13 Proizvajalec: ORMA Model: 25×13 [Koda: PRS-040] RABLJEN STROJ – V380/50 Rsdpfx Aoycg Skjd Tjbt Dimenzija plošč: 2500×1300 mm Ogrevanje plošč z vročo vodo 4 bati Največji pritisk: 70 TON Pripravljena za priklop na centralni sistem NOVE PLOŠČE (spirale + pločevine)

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €174,688 Leasing rate: €3,301.60 Laser power: 3 kW Manual table / Shuttle table: Manual table Max. sheet thickness – Mild steel: 16 mm Rodpfx Aox U Elhjd Tsbt Max. sheet thickness – Stainless steel: 8 mm Max. sheet thickness – Aluminium: 8 mm Max. sheet thickness – Copper: 5 mm Max. sheet thickness – Brass: 8 mm Cutting area: 3060 x 1530 mm X-axis: 3060 mm Y-axis: 1530 mm Z-axis: 140 mm Max. sheet size: 3048 x 1524 mm Max. sheet weight: 160 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm The HD-FO is our compact entry-level model. Control system, laser source, and chiller are integrated into the machine to keep the overall dimensions as compact as possible. The manually extendable table is moved out laterally for loading and unloading. The cutting head features automatic focus adjustment. This makes the system a particularly economical, fast, and very easy-to-operate production machine. The system includes the following components: - Manual loading and unloading table - Enclosed cutting chamber with protective glass - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Latek for programming and optimized material utilization (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Air conditioning for control cabinet - Equipped in accordance with CE guidelines ALTERNATIVE LASER SOURCES: Material | 4 kW | 6 kW -----|-----|----- Mild steel S235 | 20 | 25 Stainless steel (304) | 10 | 15 Aluminium (5083) | 12 | 20 Copper | 6 | 10 Brass (CuZn39 Pb3) | 10 | 12 OPTIONS: - Extraction with filter unit - Shuttle table

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €188,488 Leasing rate: €3,562.42 Laser power: 3 kW Manual table / shuttle table: Shuttle table Max. sheet thickness – mild steel: 16 mm Max. sheet thickness – stainless steel: 8 mm Max. sheet thickness – aluminium: 8 mm Max. sheet thickness – copper: 5 mm Max. sheet thickness – brass: 8 mm Total connected load: 26.4 kW (with extraction) Cutting area: 3,100 x 1,525 mm X-axis: 3,100 mm Y-axis: 1,525 mm Z-axis: 125 mm Max. sheet size: 3,084 x 1,524 mm Max. sheet weight: 240 kg (for 3–12 kW) / 400 kg/m² Max. total weight for double table: 2,200 kg (for 3–12 kW) / 360 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table changeover time: 25 s The HD-FN features two tables that are automatically exchanged in alternation, allowing for simultaneous cutting and loading/unloading operations. The shuttle table is positioned longitudinally, providing optimum accessibility for optional loading and unloading systems. Control, laser source, and cooling system are integrated into the unit. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinally positioned for best accessibility for optional loading/unloading systems) - Enclosed cutting area with protective glass - CNC graphic control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - Lantek CAD/CAM software for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap bin - Work area lighting - Multi-chamber extraction system - Light barrier protection for the shuttle table Rodpjx U Elbefx Ad Tobt - Remote maintenance access - Control cabinet air conditioning - Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material | 4 kW | 6 kW | 12 kW | 15 kW | 20 kW -----|-----|-----|-----|-----|----- Mild steel S235 | 20 | 25 | 30 | 35 | 40 Stainless steel (304) | 10 | 15 | 25 | 35 | 40 Aluminium (5083) | 12 | 20 | 30 | 35 | 40 Copper | 6 | 10 | 15 | 15 | 15 Brass (CuZn39 Pb3) | 10 | 12 | 20 | 20 | 20 OPTIONS: - Extraction with filter unit - Sheet handling systems - Automatic nozzle changer

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €160,788 Leasing rate: €3,038.89 Laser power: 3 kW Max. sheet thickness - mild steel: 12 mm Max. sheet thickness - stainless steel: 6 mm Max. sheet thickness - aluminum: 6 mm Max. sheet thickness - copper: 3 mm Max. sheet thickness - brass: 6 mm Total connected load: 26.5 kW Max. tube diameter: 250 mm Min. tube diameter: 16 mm Max. dimensions for square profiles: 160 x 160 mm Max. dimensions for rectangular profiles: 200 x 150 mm Max. profile length: 6,000 mm Max. profile weight: 58 kg/m Positioning accuracy: +/- 0.2 mm Repeatability: +/- 0.05 mm Profile types: round, square, rectangular Max. X-axis speed: 40 m/min Max. Y-axis speed: 94 m/min Max. Z-axis speed: 30 m/min Max. A-axis speed: 510 °/s The system includes the following components: - Enclosed cutting area with safety glass - CNC graphic control with touchscreen - Brilase 3 kW premium laser source incl. chiller - Cutting head with automatic focus adjustment - Manual loading - Manual unloading table, 3 m - Positioning laser - Central lubrication Rodpfjwiqr Asx Ad Tebt - Scrap container - CAD/CAM software with autonesting - Work area lighting PRICE FCA TURKEY OPTIONS: - Extraction unit with filters - Semi-automatic front loading system - 6 m unloading table with conveyor unit - Durma Cloud license - Laser source with 4 or 6 kW (on request)

Stanje: novo, Leto izdelave: 2026, Stanje novo Godina proizvodnje 2026 Inventarski broj 080147 Rok isporuke odmah, prodaja moguća u međuvremenu Zemlja porekla Slovačka Cena 26.400 € Leasing rata 504,24 € Na lageru 1 Pritisna snaga 40 t Rjdpswiqnqefx Ad Tobt Dužina savijanja 1500 mm Ose X i Y osa Hod 100 mm Visina ugradnje 310 mm Pogonski koncept hidraulični Rezervoar za ulje 38 l Motor 6 kW Dužina 2000 mm Širina 950 mm Visina 1900 mm Težina 1800 kg Zadnji graničnik 420 mm Matrica 1 Brzina 10 mm/s Brzina povratka 12 mm/s Brzina zadnjeg graničnika 40 mm/s Tačnost prese 0,02 +/- mm Tačnost zadnjeg graničnika 0,05 +/- mm 2 ose (Y i X) Motorni zadnji graničnik sa tasterom i ručnim, finim podešavanjem sa brojačem Dubina prešanja Y i gornja mrtva tačka pomoću unapred odabranog upravljanja Međuprsten s brzim steznim polugama za stezanje gornjeg alata Gornji alat 1010/75/R0,8/105 1x835 mm + 1x835 mm podeljen Matrica 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm podeljen 2 stola za podršku lima Oprema prema CE standardima Ulje napunjeno Uputstvo za upotrebu na nemačkom

Stanje: dober (rabljeno), Leto izdelave: 1963, Stroke = 250 mm Rbjdjydlxfopfx Ad Tot