Erika 60 nakup rabljenega (21.647)

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Isdsvb E Uqspfx Adketd Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Isdpox Anipofx Adkstd Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 17.600 h,

Stanje: rabljeno,

Stanje: rabljeno, Pressione: 600 TON Punti di pressione: n°2 Itsdpfx Adjq N Ettskjd Modello: AF 600 MB 30-60 Anno di costruzione: 1994 Dimensioni piano di lavoro: 3.000 x 1.600 mm Dimensioni slitta: 3.000 x 1.600 mm Luce frontale: 3.000 mm Luce laterale: 1.200 mm Regolazione slitta: 150 mm Colpi al minuto: 20 c/min Corsa: 500 mm Apertura stampo a PMI: 1.118 mm Potenza motore principale: 30 kW Sistema di sicurezza idraulica: presente Peso: 110 ton

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 4.769 h, nosilnost: 5.000 kg, dvižna višina: 5.080 mm, prosto dvigovanje: 1.600 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.500 mm, dolžina vilic: 1.800 mm, vrsta pogona: Elektro, Chariot élévateur électrique 4 roues Classe ISO : classe ISO 3 = 2 500 - 4 999 kg Type de mât : Triplex Transmission : automatique Ijdpfoyt Tiwox Adkstd État : remis à neuf sans garantie État technique : très bon Type de pneus avant : non marquants État des pneus avant : 80 à 100% Type de pneus arrière : non marquants État des pneus arrière : 20 à 40% Tension batterie : 80V Capacité batterie : 930Ah Année de la batterie : 2020 Description : Prix incluant un nouvel examen UVV, 4 pneus SE à l’avant en très bon état / pneus arrière remplacés. Batterie de 2020 régénérée avec un power cycler et test Kappa inclus, chargeur adapté avec prise fourni. Transport économique disponible sur demande. Possibilité de location-vente ! Déplacement latéral, positionneur de fourches, 3e valve, 4e valve, projecteur arrière, projecteurs avant, chauffage, cabine intégrale, levée libre totale, certificat CE, mini-leviers, toit de protection (LSG),

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 39.256 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, skupna višina: 2.800 mm, skupna dolžina: 7.000 mm, skupna širina: 7.000 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 12.000 kg, For sale: Deckel Maho DMC 60 T machining centre The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis swivel range: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Iedswtft Nepfx Adketd Max. load: 400 kg Table rotation speed: max. 30 rpm Number of tool pockets: 120 positions Max. tool diameter: 80 mm Max. tool diameter with an empty adjacent pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse (X / Y / Z): 50 m/min Feed speed: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Space requirements: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, cooling system, high-pressure coolant 40 bar IKZ, paper band filter, 2-position pallet changer, tool breakage control Accessories such as clamping devices or tool holders are not included in the offer. On request, transport and loading can be organised throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading (purchase/sale) BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2001, obratovalne ure: 18.391 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11160000853, največja hitrost rezkalne vretena: 12.000 obr/min, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Maximum spindle speed: 12,000 rpm Feed rate X-axis: 20 - 15,000 mm/min Feed rate Y-axis: 20 - 15,000 mm/min Feed rate Z-axis: 20 - 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Linear scale resolution X-axis: 0.001 mm Linear scale resolution Y-axis: 0.001 mm Linear scale resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 NC rotary table clamping surface: 630 mm diameter Maximum table rotation: 10.7 rpm Table feed rate: 3,600°/min Rotary table measuring system resolution: 0.001° Control: Heidenhain Itodpeypl Ecsfx Adkod Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Read spindle hours: 18,391 h EQUIPMENT 60-position tool changer Chip conveyor Coolant system

Leto izdelave: 1987, stanje: rabljeno, Število pogonskih osi: 1 Tirna širina: 1435 mm Vlečna moč - maks.: 300 t Motor: Deutz Vrsta goriva: dizel Tehnični podatki so podatki proizvajalca oz. upravljavca, zato za njih ne jamčimo. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši pogoji poslovanja in prodaje. O podjetju preko 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, dvigalna zmogljivost 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Ijdpjyt R Auofx Adkjtd Dodatne ponudbe najdete na naši spletni strani. Ogled je možen po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, obratovalne ure: 9.871 h, nosilnost: 5.000 kg, dvižna višina: 6.040 mm, prosto dvigovanje: 870 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 4.030 mm, širina nosilnega okvirja vilic: 1.760 mm, dolžina vilic: 1.620 mm, lastna masa: 10.694 kg, skupna dolžina: 4.200 mm, vrsta pogona: Elektro, gradbena širina: 2.770 mm, Four-way side loader Load center: 800 mm Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Cushion tires Front tire size: 660/250-480 Rear tire type: Cushion tires Rear tire size: 413/178-285.8 Battery voltage: 80V Battery capacity: 775Ah Itsdpfx Aju Dy A Eodked Battery year: 2017 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing and financing at attractive conditions are always available. We are also happy to purchase your used equipment, no trade-in required. Our owner, Mr. Peter Sawitzki, will advise you in detail regarding this 50/18/60 STC8.5. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls, and custom conversions for forklifts from 8 tons and up. We can also sell your vehicle on consignment. Fork positioner, Platform height: 530 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, obratovalne ure: 16.191 h, nosilnost: 13.600 kg, dvižna višina: 5.250 mm, prosto dvigovanje: 1.390 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 4.100 mm, širina nosilnega okvirja vilic: 2.450 mm, dolžina vilic: 1.200 mm, lastna masa: 18.300 kg, skupna dolžina: 4.800 mm, vrsta pogona: Diesel, gradbena širina: 2.550 mm, Diesel forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tire size: 12.00-20 Iodpoxxdy Aofx Adkotd Rear tires type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, industrial forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Lease-purchase and financing under favorable conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice about this 13.6 60-32. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on commission. Sideshifter, fork positioner, Heater, full cabin, full free lift,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, obratovalne ure: 9.894 h, nosilnost: 13.600 kg, dvižna višina: 5.250 mm, prosto dvigovanje: 1.390 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 4.100 mm, širina nosilnega okvirja vilic: 2.450 mm, lastna masa: 19.500 kg, skupna dolžina: 4.800 mm, vrsta pogona: Diesel, gradbena širina: 2.550 mm, Diesel forklift Load center: 600 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 12.00-20 Rear tires type: Superelastic Rear tires size: 12.00-20 Description: In addition to this Svetruck model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders available at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing under attractive conditions are always possible. We are also happy to purchase your used truck outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this 13.6 60-30. P.S.: Our forklift master workshop specializes in the repair, servicing, overhaul, and custom modification of forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale at our facility. Side shifter, fork positioner, heater, full cab, full free lift. Itjdpfsxxdyvex Adked

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 11.010 h, nosilnost: 6.000 kg, dvižna višina: 4.500 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.050 mm, širina nosilnega okvirja vilic: 1.460 mm, dolžina vilic: 1.400 mm, lastna masa: 9.690 kg, skupna dolžina: 4.950 mm, vrsta pogona: Diesel, gradbena širina: 2.230 mm, Sideload forklift Load centre: 700 Itsdpjv U Ey Hjfx Adksd Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 3.00-15 Rear tyres type: Superelastic Rear tyres size: 3.00-15 Description: In addition to this Jumbo model, we have approximately 200 heavy-duty forklifts, compact forklifts, conventional forklifts & sideloaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing and financing at attractive terms are always possible with us. We are also happy to buy your used equipment, even if you don’t purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you thoroughly on this JDQ 60/14/45. P.S.: Our forklift master workshop specialises in repairs, servicing, overhauls, and special builds for forklifts from 8 tons upwards. We can also exhibit your vehicle for commissioned sale at our premises if desired. Heater, Full cabin, Platform height: 1050 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 9.183 h, nosilnost: 6.000 kg, dvižna višina: 7.000 mm, prosto dvigovanje: 2.320 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.320 mm, širina nosilnega okvirja vilic: 1.460 mm, dolžina vilic: 1.400 mm, lastna masa: 9.690 kg, skupna dolžina: 5.100 mm, vrsta pogona: Diesel, gradbena širina: 2.230 mm, širina odpiranja: 2.147.483.647 mm, Sideload forklift Load center: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Iedpfx Aju Dy Riodkstd Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing & financing at attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/70T. P.S.: Our forklift master workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons upwards. We are also glad to display your vehicle with us for commission sale. Heater, full cabin, full free lift, Platform height: 960 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, nosilnost: 5.000 kg, dvižna višina: 6.000 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.850 mm, širina nosilnega okvirja vilic: 1.300 mm, dolžina vilic: 1.400 mm, lastna masa: 8.200 kg, skupna dolžina: 4.700 mm, vrsta pogona: Diesel, gradbena širina: 2.150 mm, Sideloader Load centre: 700 mm Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Pneumatic Front tyre size: 3.00-15 Rear tyre type: Pneumatic Rear tyre size: 3.00-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing on favourable terms are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this DX50/14/60. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tonnes. We are also happy to consign your vehicle for sale. Heater, full cab, Iedpfxjv U Ervs Adkstd Platform height: 1050 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 13.329 h, nosilnost: 6.000 kg, dvižna višina: 4.000 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 2.900 mm, širina nosilnega okvirja vilic: 1.460 mm, dolžina vilic: 1.200 mm, lastna masa: 9.490 kg, skupna dolžina: 5.120 mm, vrsta pogona: Treibgas, gradbena širina: 2.000 mm, Sideloader Load center: 600 mm Fork width: 180 mm Itedpfx Adjwaca Hokod Fork thickness: 60 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks, and sideloaders available in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing on favorable terms are always possible for us. We are also happy to purchase your used vehicle outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with comprehensive advice on this JGQ 60/12/40V. P.S.: Our master workshop specializes in the repair, maintenance, overhaul, and special construction of forklifts from 8 tons. We are also happy to offer your vehicle for commission sale. NIVO forks Heater, full cabin, full free lift, Platform height: 1050 mm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, številka stroja/vozila: 323, potovalna razdalja osi X: 600 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, model krmilnika: SIEMENS SINUMERIK 840 D, skupna masa: 12.000 kg, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu v obdobju med 08.04.2026 in 16.04.2026! TEHNIČNI PODATKI Pomik osi X: 600 mm Pomik osi Y: 560 mm Pomik osi Z: 560 mm Pomik osi B: 360° Dimenzije palet: 2 kosa, 500 x 400 mm PODATKI O STROJU Krmilje: SIEMENS SINUMERIK 840 D Priključna moč: 60 kVA Itedpfx Asyk Ulnodked Obratovalna napetost: 400 V Frekvenca: 50 Hz Nazivni tok: 90 A Dimenzije & Teža Dimenzije (D x Š x V): 5.000 x 5.000 x 3.000 mm Teža: 12.000 kg

Stanje: rabljeno, prevoženi kilometri: 1.033.881 km, moč: 260 kW (353,50 KM), prva registracija: 06/2010, število sedežev: 60, vrsta prenosa: samodejen, emisijski razred: Euro 5, barva: bela, zavore: retarder, Oprema: ABS, klimatska naprava, * naša interna št.: 1161 * O 530 GÜ * ZF avtomat (1/2/3/D/N/R) * Retarder * 60 sedežev (vključno z 4 zložljivimi sedeži) * Vgrajeni varnostni pasovi na sedežih * 260 KW / EURO 5 * LAWO matrika (spredaj/stran/zadaj) LCD matrica * LAWO krmilna enota * Vgrajen radio * Silišni izhod – loputa nad voznikovim mestom * Odmična okna * Mehanska zložljiva rampa * Samodejni odpirač vrat za potnike * NOVO 02/2025 Zavore sprednja os + pogonska os * Kupec je dolžan osebno preveriti stanje in opremljenost blaga/vozila! * itd. * Vozilo je lahko v uporabi / število prevoženih km in stanje lahko odstopata * Vsi podatki brez garancije * Pridržujemo si pravico do vmesne prodaje * Sklicujemo se na naše splošne pogoje Itedpeyrwm Djfx Adksd

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, Year of manufacture: 2020 Operating hours: 12,019 Load capacity: 4,000 kg H2 mast free lift: 1,688 mm H1 mast lift height: 2,600 mm H3 mast rated lift: 5,380 mm H4 mast maximum height: 6,337 mm Itsdpeytta Asfx Adksd Vehicle width: 1,399 mm Mast type: triplex mast Fork carriage: 6 rollers, 1,410 mm, class 3A Forks: 2 Tyres: superelastic Protective roof: driver’s cab, height approx. 2,334 mm Driver’s seat: MSG 75 Exclusive PLUS textile cover Hydraulic auxiliary system: double for DRF+ANB Hydraulic control: mini-levers (2 levers) Driving controls: double-pedal Electrical auxiliary equipment: prep. for data terminal 12V/10A Hydraulic accumulator in lifting circuit Tilt cylinders: 3°/6° Heater: electric heater 1,500 W Reversing lights: LED, on cab, top right Lighting system: special edition Searchlights: special edition, left & right Hour meter: only drive and lift motor Discharge indicator with lift cut-off Battery compartment for tray 236 Rearview mirror: interior panoramic mirror Battery connector: 320 A, DIN 43589, Schaltbau, LV Reverse warning signal: STILL SafetyLight, front & rear Paintwork: orange/silver metallic Labels: German Additional equipment: customer-specific feature 1 Residual load capacity 1: 4,000 kg Main pump motor serial no.: JA200311191;563435 Battery brand: special Battery: 80 V special battery, 236 Water refill system: special water refill, 80 V Electrolyte circulation for special battery, 80 V Charger: D80/

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 8.835 h, nosilnost: 6.000 kg, dvižna višina: 4.000 mm, vrsta goriva: dizel, lastna masa: 9.160 kg, barva: rdeča, Nudimo stranski viličar Jumbo JDQ 60712/52 Iedpox Trllsfx Adkstd

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0011863 - Koda proizvajalca: 4-075-02-0231 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 16KG 46X39X27 Itjdsymdzwepfx Adked

Stanje: rabljeno, Leto izdelave: 1986, Kotna jekla 120 x 13 mm Prebijalni stroj: pritisk 60 t Prebijalni stroj: izložnost 510 mm Prebijalni stroj: kapaciteta (premer x debelina) Ø 27 v 17 mm Škarje za pločevino: ploščati material 500 x 14 mm Škarje za pločevino: ploščati material 400 x 16 mm Škarje za pločevino: ploščati material 180 x 20 mm Škarje za pločevino: ploščati material 120 x 21 mm Škarje za pločevino: ploščati material 100 x 22 mm Skupna električna moč 7,5 kW Teža stroja pribl. 2,5 t Iedot D Nz Aspfx Adkotd Dimenzije pribl. 1,8 x 0,9 x 1,8 m - Hidravlične škarje za profile – kombinirane -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Itjdjvl Skgepfx Adked Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, številka stroja/vozila: P 710, vrsta upravljanja: CNC krmiljenje, kapaciteta rezervoarja za olje: 120 l, skupna masa: 6.500 kg, moč: 5,5 kW (7,48 KM), Machine is in like-new condition. The High Quality Press Brake (HQPB) represents the top model of Placke press brakes. The entire manufacturing process, from hydraulic cylinder to control cabinet construction, is carried out in-house. The combination of state-of-the-art technology and many years of experience in forming technology enables the HQPB series to achieve top-tier bending performance. Even the basic standard version is a fully functional press brake. This package offers safety, reliability, and efficiency, combined with intuitive operation, allowing us to meet the highest demands and precision requirements in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side frames welded with two pressure pipes and a top-mounted oil tank - Above-floor design - Painted finish (2-component structural paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relieved annealed - Depth measurement, reading head guided via ball rail system - Separate Y1 and Y2 control, electrical deflection monitoring Hydraulic System: - Hydraulic proportional control valve system with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rods - Low-noise internal gear pump Punch Clamping: - Upper tool holder, WILA system, hydraulic clamping system, type NSCL-II-HC, fully hardened, Max. load: head-supported = 250 t/m, shoulder-supported = 300 t/m Lower Beam: - Narrow table incl. manual clamping bar, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Due to the design, the use of mechanical crowning to compensate for deflection is not required. Iedpfoyvzkiex Adkotd - Single-V die holder (13x20) - Working height: 1050 mm (with 55 mm tool height) Front of the machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, tape measure, and plastic wear strip. Support arms are adjustable via a linear ball guide and can be set in height using a slot adjustment from 55 mm to 100 mm tool height. The ball guide is integrated into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge "2-axis controlled": - X and R axes CNC-controlled - Z axis manual Delem DA 66 Touch controller mounted on a swing arm. Safety equipment according to CE standard Technical data and working area: Press force 600 kN Working length 1550 mm Space between uprights 1200 mm Installation height 400 mm Throat depth 255 mm Ram stroke 215 mm Ram speeds: Rapid traverse max. 280 mm/s Pressing speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy ± 0.01 mm Ram tilt ± 10 mm Electronically limited to ± 5 mm Height of lower beam above floor 947 mm Motor power 5.5 kW Main dimensions: Depth below floor 0 mm Side frame pit depth 0 mm Machine weight approx. 6.5 t Tank capacity (hydraulic oil) 120 l (Technical specifications subject to change) Rear machine lighting: Work area illuminated by LED light strip between the uprights.

Stanje: dober (rabljeno), Manufacturer: KOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Power: 18.5 kW Itedok E Dxkjpfx Adksd RPM: 2930 Load capacity depends on viscosity