Elmo nakup rabljenega (107)

Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, one-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: Roll material: 0.4 - 3 mm Wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min. For corner copying (at 16, 18 & 19 mm thickness): feed speed 12 m/min. Aggregate equipment: RIEPE - separator agent application Joint trimming unit with two counter-rotating, demand-driven motors, equipped with diamond-tipped spiral cutterheads Option: Diamond cutting tools, height 65 mm instead of 30 mm Automatic edge feeder with rotary reel table, diameter 800 mm, with automatic strip magazine, spiked roller for wood strips Glue pot with automatic temperature control and stand-by function, glue roller temperature adjustable separately, capacity approx. 1.5 kg Option: Glue run-out function, Teflon-coated drip pan, adapted software for EVA/PU glue Option: Quick-change system for glue pot Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with two HF motors, 0.55 kW Pneumatically tiltable from 0 - 10 degrees, controlled from the control panel Combination milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via control system Option: Nesting kit for combination milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (Not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors each for positioning the horizontal tracing shoes and the tool Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Option: Nesting kit for radius scraper Flat scraper unit with pneumatic activation/deactivation via control panel RIEPE cleaning agent spraying unit Buffing unit with 2 motors, 0.09 kW Cgjdpfxexugpls Afxjn Control system: 18.5-inch graphic touchscreen with L-Motion software Option: Volt-free contact for integration of a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity. The return conveyor visible in the photos is not included in the scope of delivery.

Stanje: rabljeno, Statistična največja obremenitev: 4.000 kg Premer: 160 mm Višina: 35 mm Navoj: M 16 x 1,5 Cedpjfii Diofx Afxegn Višina izravnave: 20 mm Teža: 2,2 kg - 49 kosov na zalogi - novo - Cena na kos

Stanje: rabljeno, Feed unit with 6 drum motors Round motor Codpfx Afsq E Ipbexegn Motorized roller Drum motor

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA20101490328170, dolžina rezanja (maks.): 3.800 mm, širina reza pri vzporednem vodilu: 1.300 mm, premer žaginega lista: 450 mm, dolžina mize: 840 mm, moč: 6,5 kW (8,84 KM), Oprema: dozator, Rabljeni stroj GM010.0256 Leto izdelave: 2020 F45 ElmoDrive Višina stroja: 910 mm Upravljanje na višini oči Obojestransko nagibanje (+/- 46°) Maks. premer lista 450 mm Motor 6,5 kW (8,8 KM) 3-osni predrezni agregat, nagib na obe strani Podaljšek mizne plošče 840 mm Cedpfxjw Imvmo Afxogn Dvojni voziček z dolžino 3800 mm Stikalo za vklop/izklop na dvojnem vozičku Kotno-vogalni prislon CNC vzporedni prislon 1300 mm Laserski prikaz reza Pršilni sistem

Stanje: rabljeno, moč: 74 kW (100,61 KM), prva registracija: 05/1953, vrsta goriva: dizel, število sedežev: 36, vrsta prenosa: mehanski, barva: rdeča, +++No vehicle registration documents available+++ +++Various attachments and windows included+++ Engine: Henschel 512 DJ Seating capacity: 35 + 1 tour guide (only 32 + 1 seats present) Transmission: 5-speed manual Tour guide microphone * Trailer hitch * Driver’s door * Roof hatches/ventilators * Vehicle dimensions: Length 9.28 m, Width 2.40 m, Height 2.8 m Cedpformlq Rsx Afxegn * Dual rear wheels * Tyre condition approx.: Front axle 70% - Rear axle 70% Our internal vehicle number: 4396 Subject to errors. Images and text may differ from the actual vehicle. Always over 180 vehicles in stock.

Stanje: pripravljen za uporabo (rabljen), vlečni modul Codpfsd Hvznex Afxjgn

Stanje: rabljeno, static maximum load 3,200 kg diameter 185 mm height 45 mm Cedpefii Dgsfx Afxogn thread M 20 x 1.5 levelling height 20 mm weight 3.4 kg - 1 unit in stock - new - unit price

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM010.0310, dolžina rezanja (maks.): 3.300 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, vhodna frekvenca: 50 Hz, moč: 7,5 kW (10,20 KM), Altendorf F45, manufacturer-refurbished, with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage lengths and cutting lengths: - Carriage length (double roller carriage): 3,400 mm - Cutting length with crosscut fence: 3,300 mm - TIP-SERVO-DRIVE: 2,990 mm - Max. saw blade diameter: 550 mm Saw blade: - Saw blade diameter: 550 mm - Saw blade projection at 90°: 204 mm - Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data: - Motor power: 7.5 kW Csdpfx Afsw I Rtcjxsgn - Voltage: 380–420 V - Frequency: 50 Hz - Circuit protection: 25 A Dust extraction connection: - Extraction port (top): 80 mm - Extraction port (bottom): 120 mm - Negative pressure: 1,200 Pa at total extraction connection, 140 mm - Air flow: min. 1,110 m³/h at 20 m/s Air cushion table: - Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT: - Extendable cross slide carriage extension - DIGIT L display

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 2.900 mm, premer žaginega lista: 550 mm, moč: 7,5 kW (10,20 KM), Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length at mitre fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Max. blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse rating: 25 A Cgedpfx Afjwynhpexsn Dust extraction connection Extraction (top): 80 mm Extraction (bottom): 120 mm Vacuum: 1,200 Pa at total extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder, directly at the control unit Preparation for 2-axis scoring unit Extended cutting height with single-sided tilting

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. Codpfxjf Tdwcj Afxegn • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood Code: RU0010618 - Manufacturer Code: 2BH1610-7HH36-Z - Condition: Used - Functionality: Fully operational - Weight: 60 kg - Dimensions: 120x80x60 cm - If interested, we offer an overhaul service; please contact us. Cgjdpju H Ir Hefx Afxen

Stanje: dober (rabljeno), Leto izdelave: 2001, Prodajam 3-osni CNC obdelovalni center HOLZ-HER UNI-MASTER 7226 s prečnim delovnim mizo, letnik 2001. Konfiguracija: Glavno vreteno za 3 osi, popolnoma obnovljeno / vodno hlajeno Magazin za orodja za 6 HSK63 mest na glavi 1x utorna žaga v X-smeri Vrtalna glava s 16+4 vrtalnimi vreteni Uporabna delovna površina 3100x1360 mm 2 delovni območji, 4 vpenjalna območja Avtomatski sistem centralnega mazanja Holzher programska oprema z navodili za uporabo Črpalka SIEMENS ELMO-L S22 2,35 kW Cgodpji U Dxuofx Afxjn Dodatni vakuum za šablonska dela ali dodatne vpenjalne naprave Dobro stanje. Na voljo takoj iz zaloge.

Stanje: rabljeno, Vakuumska črpalka ATEX Elmo G400 Kapaciteta: 440 mbar Vakuumski manipulator + vrtljiva roka (maks. 50 kg) Uporaba: Ravnanje z vrečami in kartoni Cgsdpsyfw H Djfx Afxen

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 399.747 km, moč: 199 kW (270,56 KM), prva registracija: 06/2007, vrsta goriva: dizel, velikost pnevmatike: 385/55 R22.5, konfiguracija osi: 4x2, medosna razdalja: 3.900 mm, gorivo: dizel, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 12, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 7.050 mm, skupna širina: 2.500 mm, skupna višina: 3.100 mm, Leto izdelave: 2007, Oprema: zapora diferenciala, Structure Tank capacity: 9,000 litres Structure: Total container capacity: approx. 9,200 litres Flush water capacity: approx. 2,000 litres Sludge capacity: approx. 7,200 litres Hydraulic tipping system Hydraulic opening Vacuum system Vacuum pump: ELMO 2BE1-253-OBY4. The NASH 2BE1 liquid ring vacuum pumps and compressor series covers a wide range of suction volumes from 100 to 22,500 m³/h (60 to 13,000 ACFM), a vacuum range of 33 mbar abs. (down to 1 inHgA) and pressure up to 3.5 bar abs. (50 psia). High-pressure system Pratissoli KF30 approx. 110 litres / 200 bar Jetting hose reel with approx. 160 m HP hose DN25 = Further information = General information Cab: P (CP14), single Registration number: BT-BT-98 Technical information Number of cylinders: 6 Driveline Engine brand: Scania Axle configuration Brakes: Disc brakes Front axle: Tyre size: 385/55 R22.5; Max. axle load: 9,000 kg; Steered; Tyre tread left: 80%; Tyre tread right: 80%; Suspension: leaf spring Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Differential lock; Max. axle load: 11,500 kg; Tyre tread inner left: 80%; Tyre tread outer left: 80%; Tyre tread inner right: 80%; Tyre tread outer right: 80%; Suspension: air suspension Weights Unladen weight: 12,810 kg Payload: 7,690 kg GVW: 20,500 kg Functional Water tank: 2,000 l Tipper: rear Maintenance APK (general technical inspection): valid until 07/2026 Condition Technical condition: very good Visual condition: very good Number of keys: 2 (2 remote controls) = Company Information = For more photos see: Why buy from Thomas Trucks? The choice is simple. Thomas Trucks is one of the world's independent trading companies in the field of commercial vehicles. Here you can choose from a constantly changing stock of used trucks, tractors, trailers, and semi-trailers. Our range includes all European brands, model years and price ranges. You will always find a good vehicle at the right price! Thomas Trucks always offers: - Competitive prices - Good service - Spacious and fast-changing stock - Recognized quality - Proper business conduct - We speak many languages - Support with registration and transport - (Export) license plate quickly arranged - Professional technical services - And much more. Cedpfx Afsyhat Ssxjgn Visit the website: and view our complete stock and competitive offers We are open 6 days a week. Need help with export, import, or shipping your vehicle? Contact our sales team. It is also possible to sell your current vehicle to us. We do our best to display the data as accurately as possible, however, no rights can be derived from this information. We can also arrange financing for you in the Netherlands.

Stanje: dober (rabljeno), Stranski kanalni kompresor, stranski kanalni puhalnik, obročni puhalnik, vakuumska črpalka, puhalnik Codpfx Afswncvwsxogn -Proizvajalec: Gardner Denver Siemens, Elmo Rietschle stranski kanalni puhalnik/kompresor -Tip: G 200 2BH1800-7AH17 -Pogon: 5,5 kW -Hitrost vrtenja: 2900 obr/min -Vakuum: -300 do 300 mBar -Mere skupno: 495/480/H525 mm -Teža: 129 kg

Leto izdelave: 1999, Stanje: dober (rabljeno), Granulate dryer, compressed air dryer, continuous dryer, granulate drying system - Manufacturer: digicolor, Granulate dryer type Dehumidifying Dryer - Model: DT 204 M - Power: 10,000 W - Side channel blower: Siemens Elmo-G 1.5 kW Cgodelb Iv Njpfx Afxjn - Individual components: see photos - Dimensions: 1020/610/H1550 mm - Weight: 241 kg

Stanje: rabljeno, Leto izdelave: 2004, Za neprekinjeno proizvodnjo degazirane vode. Stroj (dodatno): Degazacija vode Kapaciteta: 50 hl/h Vsebnost O2 po odzračevanju: 0,5 ppm Temperatura: 16 °C Tlak: 4 bar Csdexw R Rxepfx Afxogn Moč: 1,0 kW Napetost: 380 V Frekvenca: 50 Hz Upravljanje / krmiljenje: Popolnoma avtomatsko / krmilnik S7 Material: Okvir: 1.4301, cevovodi: 1.4404 Oprema: Vodna linija (pnevmatski loputni ventili, merilnik pretoka, povratni ventil, ventil za odvzem vzorcev), membranski moduli (vstop vode od spodaj), CO2-linija (loputni ventil, redukcijski ventil, merilnik pretoka, ročni regulacijski ventil), vakuumska linija (loputni ventil, vakuumska črpalka (ELMO), ročni regulacijski ventil), ploščni toplotni izmenjevalnik (Thermowave), visokotlačna črpalka (Hilge, 4,5 bar pri 250 hl/h, 7,5 kW motor)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FXH14B001, stružna dolžina: 1.600 mm, največja hitrost vretena: 2.500 obr/min, pomik po osi Z: 900 mm, teža obdelovanca (maks.): 8.000 kg, premer mize: 1.250 mm, La machine n'a été utilisée qu'environ 5 fois ! DÉTAILS TECHNIQUES Déplacement axe X : −685 mm à +680 mm Déplacement axe Z : 900 mm Déplacement axe W : 800 mm Diamètre de pivotement max. : 1 600 mm Longueur de tournage max. : 1 600 mm Poids maximal de la pièce : 8 000 kg Table Diamètre de la table : 1 250 mm Vitesse basse : 5–120 tr/min Vitesse haute : 150–300 tr/min Broche d’usinage Vitesse de broche : 25–2 500 tr/min Couple maxi. de la broche : 478 Nm Axe C Vitesse nominale : 3,33 tr/min Plage d’avance (fraisage) : 0,1–3 000 mm/min Plage d’avance (tournage) : 0,01–500 mm/tr Cgsdpex Atpbofx Afxsn Changeur d’outils Cône de broche : BT50 Capacité du magasin d’outils : 16 Diamètre max. de l’outil : 220 mm Longueur max. de l’outil : 500 mm Poids max. de l’outil (fraisage) : 25 kg Poids max. de l’outil (tournage) : 50 kg Temps de changement d’outil : 30 s DÉTAILS DE LA MACHINE Marque de la commande : Fanuc 0i-T Dimensions Hauteur de la machine : 5 625 mm Poids de la machine : 22 000 kg Alimentation Raccordement électrique : 90 kVA Besoin en air comprimé : 5,5 kg/cm² Capacité du réservoir de liquide de coupe : 150 l

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FML14BE06, potovalna razdalja osi X: 850 mm, pomik osi Y: 530 mm, pomik po osi Z: 510 mm, obremenitev mize: 500 kg, največja hitrost vretena: 10.000 obr/min, Stroj je popolnoma neuporabljen! TEHNIČNE PODROBNOSTI Pomiki X-pomik: 850 mm Y-pomik: 530 mm Z-pomik: 510 mm Vreteno Največje število obratov: 10.000 rpm Najmanjše število obratov: 150 rpm Razdalja čelo vretena–miza: 150–660 mm Razdalja sredina vretena–stebro: 585 mm Premer vretena: 70 mm Miza Dimenzije mize: 1.000 × 510 mm Cjdpfx Afex Ar Ucjxsgn Število in velikost T-utorov: 5 × 18 mm Največja obremenitev mize: 500 kg Pomiki Hitri pomik X/Y/Z: 36 / 36 / 24 m/min Delovni pomik: 1–10 m/min Natančnost Pozicijska natančnost: 0,01 mm Ponavljajoča natančnost: 0,007 mm Izmenjevalec orodij Kapaciteta (roka): 24 orodij Vpenjalni sistem: BT40 Čas menjave (T-T): 2,0 s Vlečna palica: P40T-1 Največji premer orodja: 80 mm Največja dolžina orodja: 300 mm Največja teža orodja: 7 kg PODATKI O STROJU Dimenzije in teža Tloris (Š × D × V): 2.430 × 2.115 × 2.813 mm Teža stroja: 5.800 kg

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), Product number: 2859 Type: K64DC8Q-VA Serial number: 99099-1 Year of manufacture: 1999 Bowl capacity: 65 litres Knife speed: variable speeds Bowl speed: 2 speeds Steam: 1.5 Bar, 55 kg/h Vacuum pump: Elmo 2BV2071, 125 m³/h Power supply: 3 x 400V, 50Hz, 50kW Dimensions: 1750 x 1950 x 2000 mm Cgodpfx Afsq Dqgzoxon Weight: 1700 kg Equipped with ejector, water dosing system, and temperature indicator.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Tip: K324AC8VA Serijska številka: S8-00324-0256-18 Leto izdelave: 2018 Posoda: 325 litrov Hitrost noža: 6 brezstopenjsko programabilnih hitrosti Posoda: 2 hitrosti Mešanje: 2 obratne mešalne hitrosti Krmiljenje: Auto-Command 1500K Vakuumska črpalka: Elmo Rietschle L-BV5, 200 m3/h Stisnjen zrak: 6 - 10 Bar Voda: 4 - 6 Bar Moč: 3 x 400V, 50Hz, 157kW Dimenzije: 2600 x 3650 x 1700 mm Teža: 4300 kg Cedpfx Aox Eia Iefxjgn Vključuje izpraznilno in BW200 nakladalno napravo Z vodomerom

Stanje: pripravljen za uporabo (rabljen), Ciklon za prah, separator prahu, odsesovalec prahu, industrijski sesalec, Rabljeni stroj Proizvajalec: Piovan Tip: — Skupne dimenzije: Širina: 820 mm Globina: 600 mm Višina: 2300 mm Cjdpfexh Ammsx Afxjgn Podatki o vakuumski črpalki: Proizvajalec: Siemens Tip: ELMO-G 2BH1 Moč: 4 kW Prostornina posode za prah: Ø 470 x 340 mm

Leto izdelave: 2015, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Automated production plant for manufacturing pipe bends of SDR 11 and SDR 17 class. Patented bending system in which the pipe ends are inserted into the bending radius during the bending process. This reduces the reduction of the pipe’s outer wall during bending and accordingly lowers the costly need for additional material to compensate for wall thickness loss. Pipe bends can be produced with a final bend angle of 90°. Flexible adjustment of bending angle. Simultaneous heating of the bending preforms in a radiator field. Rotation of bending preforms during heating to achieve homogeneous heat distribution. Cgodpou Itlnsfx Afxjn Pipe ends are not heated, thus preserving their geometry. Therefore, the pipe bend can be further processed using conventional butt-welding techniques. Automatic transport of preforms from the buffer magazine up to the removal of finished pipe bends—adaptable according to customer requirements. Siemens PLC control system with touchscreen user interface.

Stanje: dober (rabljeno), Elmo Rietschle VC300 vakuumska črpalka Csdpfxjwmdahe Afxegn 3x oljno mazane rotacijske lopatične črpalke Elmo Rietschle, 5,5 kW, pretok 300 m³/h

Stanje: novo, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15VWL1032, The machine comes with tooling for producing electro couplings within the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Cedpfxsu Itk Rs Afxsgn The offer also includes original MSA drawings. The VWL 1200 is a vertical three-axis CNC-controlled machine designed for the manufacture of electrofusion fittings, suitable for processing medium-sized to large fittings or pipes. The machine is capable of producing fittings typically within the internal diameter range of 250 to 1400 mm (1400 mm SDR17). Optionally, a two-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling terminal holes during the external profiling cycle. The VWL 1200 employs special fixtures that are clamped onto an innovative component, integrated into the coupling design, providing a separate fusion zone in each half of the coupling. The wire laying process starts at one terminal at the end of the coupling. The wire is inserted at double the required pitch to the end of the fusion zone, after which the tool system rotates and then moves in the opposite direction at the intended pitch layout until it reaches the resting position at the other terminal. The process is completed in the second part of the coupling. The VWL 1200 system is designed to facilitate the loading and unloading of larger couplings (which may weigh up to approximately 300 kg even before wire insertion). The machine features a completely open top, which enables easy overhead loading using a gantry system. Alternatively, parts can be loaded via the exceptionally wide operator doors using suitable gripping and handling equipment.