Eisen Und Hammerwerk Gmbh nakup rabljenega (86.946)

Stanje: novo, skupna masa: 33.400 kg, lastna masa: 3.400 kg, največja dovoljena obremenitev: 30.000 kg, velikost pnevmatike: 559x300, Leto izdelave: 2025, TPW 30 VL - LK Turntable steering on front axle Trailing rear axle, fixed 6,000 mm length 2,200 mm width Hedpfxohbmu Is Ah Dsnu Towing bar with safety catch and height adjustment Tyres: 559x300 banded wheels with steel rims 5 lashing stops per longitudinal side for load securing Paint finish: RAL 5010 blue Transport deck: 40 mm recessed, bolted wooden floor #Heavy-duty transport #Intra-plant transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 to 100 tons #Heavy-duty transport platform carts #Platform heavy-duty trailers #All-wheel steering #Transport carts

Leto izdelave: 2018, Stanje: rabljeno, Sejalna naprava za presejanje lesnih sekancev Stanje: rabljeno Izvedba: polmobilna na prikolici (kmetijski promet) Kapaciteta sejanja: pribl. 20 - 25 m³/h Frakcije: 3 sestavljena iz: - Zalogovnik (prostornina pribl. 6 m³) z 2 lastnima iztisnima polžema (lastna izdelava) - Sejalni stroj tipa ASM-200 (3 frakcije) Kapaciteta sejanja: pribl. 20 - 25 m³/h Frakcije: 3 vključno z perforiranimi siti D = 40 mm + D = 5 mm - Prikolica / podvozje (opcijsko) - Električna instalacija Hnjdpfxsxmvras Ah Dju - Agregat Prodaja sejalne naprave po naročilu stranke. Lokacija naprave: 3185 Schmitten, Švica

Stanje: rabljeno, Leto izdelave: 1993, Well-maintained used CNC profile grinding machine from a screw factory. Hsdpfowt Uqdjx Ah Dsnu For further details, please get in touch.

Stanje: dober (rabljeno), Leto izdelave: 2009, Bürck + Lang talna žaga s samodejnim podajanjem, vpenjalna naprava za profil, stranske nastavitve širine reza, popolnoma delujoča. Hedpfx Aowb H T Tsh Dsnu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Capacity 1000 x 3.5 mm; light barrier, - electric foot switch - left side stop 600 mm, two support arms each 600 mm - centralized lubrication Hjdpfx Ahoxdv Uco Djnu - Ortlinghaus brake-clutch combination - switchable between upholding mode or tilting roller table.

Leto izdelave: 2025, Stanje: novo, Heavy-light separation, removal of lint, bristles, contaminants, etc. Classifier sizes: classifier width from 200 mm to 1800 mm. Hedpfx Ahschb Ruj Djnu Our standard classifiers: - Classification stages: 8 / 12 / 15 / 17 - Air velocity in the classifier: 2 to 20 m/s Upstream and downstream equipment available as required. Upon request, we offer planning, assembly, and commissioning. See example photos. We are the manufacturer of these zig-zag separator systems and produce them in various sizes and types. To provide you with an offer, we require the following information: 1. What type of material would you like to separate? 2. Particle size 3. Bulk density kg/l 4. We have a technical center in our facility where we can test your material.

Stanje: novo, Leto izdelave: 2025, TPW 30 AL - AS s pogonom na vsa kolesa, volanski kolesni zglob, obloge 559x300. Transportno dno iz douglasovega lesa, 40 mm. Hnodpfxohbmukj Ah Dju Dimenzije: Dolžina: 4000 mm Širina: 2000 mm Vlečna ojnica: 1600 mm s vlečnim ušesom 40 mm in varnostno zaščito s prilagoditvijo višine. Barva RAL 2000. #notranji transportni sistemi #težkotovorni priklopniki 6-100 ton #težkotovorni priklopniki od 3 do 100 ton #težkotovorne transportne platforme #platformni težkotovorni priklopniki #volansko krmiljenje vseh koles #transportni voziček

Stanje: novo, Trough Conveyor Belt | Troughed Belt Conveyor | Conveyor Belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/8 Belt width: 500 mm Hnedpfxsxk Tg Ne Ah Deu Axle distance (A-A): 8,000 mm Throughput capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Drum motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (32 mm) Machine weight: approx. 800 kg Machine color: RAL 6011 reseda green Suitable for, among others, the following bulk materials: Potatoes, wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cutoff pieces, and much more. Accessories (optional): Feed hopper (loading hopper), internal belt scraper, undercarriage, tow bar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt

Leto izdelave: 1992, Stanje: rabljeno, Plate heat exchanger for milk processing Hnsdpfeh Eulgex Ah Deu

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without the need for extensive programming expertise. Serial and article numbers can be automatically incremented by the software after a simple initial setup. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) directly from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking area size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Power supply 230V Hnjdow Et Ilepfx Ah Dou - Air cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: rabljeno, Leto izdelave: 1954, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 541000, skupna višina: 1.700 mm, skupna dolžina: 1.200 mm, skupna širina: 1.200 mm, skupna masa: 815 kg, dolžina mize: 700 mm, širina mize: 70 mm, premer diska: 150 mm, - Leto izdelave: 1954 - Popolnoma delujoč, priključen na elektriko, pripravljen za predstavitev - Brusilni koluti Ø150 mm - Prečni pomik 300 mm Hjdjxnimtopfx Ah Dsnu - Vzdolžni pomik 450 mm - Velikost mize 700 x 70 mm / nagibna - Brusilno vreteno nastavljivo v Z, X, Y - Dimenzije stroja 1700 x 1200 x 1200 mm - Teža 815 kg - Tovarniška št.: 541000 Dodatna oprema: - Nagibna delilna glava - Nagibni primež - Diamant za oblačenje 2x - Nosilci brusilnih kolutov - približno 15 diamantnih/borazonskih kolutov - različni brusilni koluti - Vpenjalne klešče Ø1 – Ø20 mm

Leto izdelave: 2025, Stanje: novo, Zaprtospreminjajoči vibracijski sejalniki z čiščenjem s tolkalnimi kroglicami in od zadaj preprosto zamenljivimi sejami. Primerni za sejanje vseh vrst praškastih, zrnastih in granulatnih materialov v suhem stanju. Velikosti: širine 500–1500 mm / dolžine 1200–2400 mm. Sejalne plasti: 2–4 plasti, zrnavost prosto izbirna 0,1–18 mm. Izdelujemo različne velikosti in tipe. Za pripravo ponudbe potrebujemo naslednje podatke: 1. Kateri material želite sejati? 2. Velikost zrn. 3. Nasipna gostota kg/l. Hnedschb Ryepfx Ah Deu

Stanje: novo, Leto izdelave: 2025, TPW 8000 AL - AS Industrial Heavy-Duty Transport Trailer Length: 6000 mm, Width: 2000 mm Hnedpfx Ajhbicwjh Deu Payload: 8000 kg All-wheel stub axle steering, 30 mm wooden transport floor, drawbar 1150 mm with 40 mm pin, bandage wheels 425x150, painted in RAL 2000. Double-acting wheel chock, 6 stop blocks per side for load securing.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, obratovalne ure: 110 h, The twin-screw laboratory extruder was located at a university and was used exclusively for instructional purposes. It has only 110 operating hours. Hnjdpfx Ahjxlpzfj Dou Machine Designation: Twin-Screw Laboratory Extruder Manufacturer: Leistritz Extrusionstechnik GmbH Model: MICRO 27 GL / 32D Year of Manufacture: 1997 Speed: 400 rpm Operating Voltage: Electrical connection values: 400V, 50Hz; Control voltage: 230V Operating Hours: 110 hrs Drive Motor: 8.4 kW, Input speed: 2200 rpm Dimensions: Extruder height: 1050 mm; Length: approx. 2500 mm; Width: approx. 800 mm; Height incl. control panel: approx. 1900 mm; Total weight of extruder: approx. 950 kg. Technical Documentation: Yes Remarks: Screw diameter: 27 mm; Screw length: 32 D; Screw flight depth: 4.3 mm; Screw rotation direction: co-rotating / counter-rotating; Screw speed range: 10 - 400 rpm; Total screw drive torque: 200 Nm; Maximum screw back pressure (continuous operation): 200 bar; Gear ratio: i = 5.38. Accessories: Dosing unit, die head / LSA tool, vacuum unit, temperature control unit, cooling belt (stainless steel design), strand dryer, granulator, downstream equipment, die head / LSA tool. Condition: Used, very good Price: On request

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) Hnodpev Sybysfx Ah Dou • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Leto izdelave: 2025, Stanje: novo, Zaprte prosto viseče krožne sito naprave z udarnim čiščenjem z žogicami in enostavno menjalnimi sito vložki na zadnji strani. Primerne za sejanje vseh praškastih, zrnastih in granuliranih materialov v suhem stanju. Velikosti: širina 500–1500 mm / dolžina 1200–2400 mm Sloji sita: 2 do 4 slojev, zrnatost < 18 mm - prosta izbira Proizvajamo različne velikosti / tipe. Za pripravo ponudbe potrebujemo naslednje podatke: 1. Kakšen material želite sejati? Hjdpfjbcngisx Ah Djnu 2. Velikost zrn 3. Nasipna masa kg/l

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 14 kg, skupna širina: 245 mm, skupna dolžina: 420 mm, skupna višina: 450 mm, vhodna napetost: 230 V, volumenski pretok: 420 m³/h, Oprema: šasija, Fume extraction unit with remote control and extraction hose Air inlet interface øm flange Max. power 300W Air velocity 24 m/s Filtration efficiency 0.3 µm / 99.97% Noise level Hnsdpounh Nmofx Ah Deu

Leto izdelave: 2025, Stanje: novo, Zaprte prosto nihajoče krožne sita s čiščenjem z gumijastimi kroglicami in enostavno zamenljivimi sitnimi vložki na zadnji strani. Primerne za presejanje vseh praškastih, zrnastih in granuliranih materialov v suhem stanju. Dimenzije: širina 500–1500 mm / dolžina 1200–2400 mm Sita: 2 do 4 sloji, velikost odprtine od 0,1 do 18 mm po izbiri. Proizvajamo različne velikosti oziroma tipe. Hsdpsbcnatofx Ah Djnu Za pripravo ponudbe potrebujemo naslednje podatke: 1. Kakšen material želite presejati? 2. Velikost zrna 3. Nasipna gostota v kg/l

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Semi-automatic Panel Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling system LOW 4322 is specifically designed for medium to high product volumes, meeting the increasing demands of modern production processes. PCBs of various materials are separated using dust- and stress-minimized sawing and routing technologies, ensuring maximum flexibility, precision, and throughput. Highly dynamic linear motor axes, cutting tools, and grippers meet the highest quality standards and guarantee the depaneling machine excellent durability and reliability. Made in Germany Semi-Automatic Depaneling – Tailored Solutions The LOW 4322 depaneling machine enables rapid product changeover while maintaining short separation and handling times. Loading of the PCB panel is done via a parallel shuttle, with positioning and clamping secured using pin clamping technology, and, if necessary, in combination with vacuum suction cups. This machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0–90°) • X-Y cross-stitch module utilizing linear motor technology with high-resolution measuring system • Dual loading module configured as a parallel shuttle, divided left and right with sliding doors • Steel welded frame with two service doors – left and right. Powder-coated RAL 9002 • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area: 420 x 330 mm • Automatic router bit length processing (only in combination with shaft separation module) • Remote maintenance/support via remote connection (TeamViewer) or customer-provided solution • Touch IPC with Windows 10 operating system • Laser axis measurement including protocol • Air ionization • Router bit breakage monitoring (shaft routers only) • Prepared for vacuum clamping technology • Powder-coated RAL 9002, ESD protective glass and sliding doors Hodpfjw Et H Ijx Ah Djnu An optional dust extraction unit can be offered as a retrofit solution. The high performance of the depaneler with standard saw or milling module, fully automatic router length processing, camera-based teach-in system, and two simple PCB fixtures can be further enhanced by numerous customer-specific adaptations and equipment options (e.g., camera vision system). Accurate laser axis measurement before commissioning is part of the customer service offered for all inline and stand-alone depaneling systems from Systemtechnik Hölzer.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. After prior setup, the software independently increments serial and article numbers. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a handheld scanner is also possible. A laptop including a mounting bracket with a Windows operating system is included as standard equipment. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Additional options, such as side-mounted supports for marking long components, are also available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10,640 nm • Marking field size: 220 x 220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (including activated carbon filter) • Optional: Supports for large workpieces (also on both sides) • Marking software EZCAD in German / English • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop including mounting bracket with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width: approx. 720 mm / Door height: 400 mm • Connection: 230V • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) Hjdpfx Aswkpyheh Djnu • Weight: approx. 160 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection Hedpfxounh Hrs Ah Donu • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. Hsdswkpx Rjpfx Ah Donu The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf • Aluminium profile frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LAS 23 mit integrierter Absaugung, The LAS 23 portable is a compact and mobile fiber laser designed for flexible direct marking of a wide range of workpieces directly at the site of use. Thanks to its wheeled base frame, the system can be deployed independently of location and can easily be moved to hard-to-reach or large-volume workpieces. This makes it particularly suitable for applications where a stationary laser cell is not practical. The modular design with custom-made attachments allows for quick, tool-free adaptation to different workpiece geometries. The quick-change system enables fast replacement of attachments – ideal for varying marking tasks in production and maintenance. The integrated laser software supports the creation of texts, numbering, 2D codes (e.g., DataMatrix, QR codes), and graphic elements (e.g., logos) through a user-friendly interface that requires no programming knowledge. Serial and part numbers can be automatically incremented. Additionally, there is the option to import variable data – such as drawing numbers or project designations – from external tables (e.g., CSV/Excel files) and automatically integrate them into the marking template. An optional hand scanner can be connected for fast data capture, reducing manual input and increasing process reliability. Made in Germany • Fiber laser 20W (optional 30W, 50W) • Laser class 1 • CE-compliant, according to EU directives • Wavelength 1064nm • Marking area 70x70mm (optional: 110x110mm) • Signal light for indicating operating status on the hand unit • Marking software EZCAD (other software options available) • 230V connection • Air-cooled Hjdpfx Ajvyc Rmeh Denu • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit: 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a wide range of marking tasks. The integrated fiber laser allows you to mark nearly all materials, such as steel, carbide, aluminum, and plastics. Hnsdpfx Aeu Smd Eoh Deu Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become essential in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (three-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (three-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction system (with activated carbon filter) • Pilot laser (simple preview and contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is designed for a wide range of marking applications. Thanks to its integrated fiber laser, you can mark nearly all materials, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, utilizing a laser for permanent marking has become indispensable. The powerful laser software enables easy creation of texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no advanced programming knowledge required. The software can automatically increment serial and article numbers as preset. In addition, it can import data (such as drawing numbers, project labels, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 Hnsdpfewlc Stsx Ah Dsu • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (larger sizes optional) • Signal lamp indicating operational status • Options: rotary axis (3-jaw chuck) • Options: extraction unit (including activated carbon filter) • Options: digital height measuring system • Options: autofocus system for automatic focus adjustment • EZCAD marking software in German/English (other software available on request) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC running Windows • Height-adjustable monitor and keyboard mount • Frame made of aluminum profiles • Air-cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg