Donau nakup rabljenega (47)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZFM300H 76 2301, Stroj za rezkanje zobatih letev Klodpfoykpl Nsx Adkop

Stanje: rabljeno, Leto izdelave: 1968, Donau hitra radialna vrtalna stroj tip DR 32 Število obratov 60–1800 /min Izvleček 600 mm Osnovna plošča 100 x 1400 x 110 mm Naprava za rezanje navojev Kjdjx Hgkvopfx Adkelp Sistem za hlajenje Strojna svetilka Hitromenjalni nosilec z vložki Strojni primež

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Kodpfjirax Usx Adkolp -Weight: 1500 kg

Stanje: rabljeno, Leto izdelave: 1994, Rapid radial drilling machine Donau Danuflex145 Klodpfxewtq Dyo Adkep

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, krmilna napetost: 400 V, Ponujamo: Donau Alpha 30 Mk4 Letnik 2019 Obratov 60-3150 2150 KG Kledpfxoycvgwe Adkop

Stanje: rabljeno, Leto izdelave: 1991, Delovna miza 600mm x 1200mm Hod roke 600mm Vpenjanje orodja MK 3 Vrtalna zmogljivost 28mm v jeklu Naprava za rezanje navojev Hladilni sistem Dokumentacija Kedpfx Aoxpfglodkslp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts Kedpfxexn A Sps Adkelp – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1976, Work table: 500 mm x 1200 mm Arm travel: 600 mm Tool holder: Morse taper 4 (MT 4) Drilling capacity: 32 mm in steel Tapping device Coolant system Electrics: 24V control voltage Kodjwnn S Rjpfx Adkslp Two-channel emergency stop Safety guard at the drill Completely overhauled in 2025 12 months warranty New paint finish RAL 7035 / 7031

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 8.000 obr/min, Travelling column machine Completely overhauled in 2025 Worktable clamping surface mm 1500 x 1000 Table height mm 750 Number of T-slots 7 T-slot size DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top to spindle nose min/max mm 150 / 850 Main spindle drive for speed 8000 rpm Tool holder SK 40 AC motor, frequency controlled kW 26 at 44% duty cycle Speed range: rpm 15 – 8000 Torque Nm 245 Internal coolant supply (IKZ) Chip conveyor band filter system Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect linear measurement system Accuracy Positioning accuracy X, Y-axis over 1000 mm mm ± 0.0150 Repeatability X, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Kledpfxjw I Tm So Adkep Repeatability Z-axis mm ± 0.0075 24-position tool magazine, mounted on the left side of the machine - Tool stations 24 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 65039, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 8.000 obr/min, Travelling Column Machine Completely Overhauled in 2023 Work Table Clamping Surface mm 1500 x 1000 Table Height mm 750 Number of T-slots 6 T-slot size according to DIN 650 mm 18 Travelling Distances X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance Table Top – Spindle Nose min./max. mm 150 / 850 Main Spindle Drive for 8000 rpm AC Motor, frequency controlled kW 16 at 44% duty cycle Ksdpfjwv Nl Ujx Adkelp Speed Range: rpm 15 – 8000 Torque at 44% duty cycle Nm 104 Constant up to rpm 1500 Feed Drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid Traverse Speeds (X/Y/Z): m/min 30/30/20 Indirect linear measurement system Accuracy Positioning accuracy X, Y-axis over 1000 mm mm ± 0.0150 Repeatability X, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeatability Z-axis mm ± 0.0075 24-position Tool Magazine Mounted on the right of the travelling column - Tool stations 24 - Tool holder (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine Control: Heidenhain iTNC530 (optional 620)

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 8.000 obr/min, Work Table Clamping surface mm 3000 x 1000 Table height mm 750 Number of T-slots 6 T-slot size mm 18 Travel Paths X-axis mm 2900 Y-axis mm 1000 Z-axis mm 700 Distance table top - spindle nose min/max. mm 150 / 850 Main Spindle Drive for 8000 rpm AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: rpm 15 – 8000 Torque at 44% duty cycle Nm 96 Constant up to rpm 1500 Feed Drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect linear measuring system Accuracy Positioning accuracy X, Y axis over 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 Tool Magazine 2 x 24 stations Disc-type magazine - Tool stations 16 - Tool shank (DIN 69871 / 69872) SK 40 Kedpfsw E Ey Hjx Adkslp - Max. tool diameter mm 76 - Max. tool length mm 300 - Max. tool weight kg 8 Machine Control Heidenhain TNC 426 Splash Guard Enclosure Enclosure of the entire working area, designed as partial compartment protection in compliance with the applicable German accident prevention regulations (UVV) and European standard EN 12417, with manually operated work area door including electrical interlock. Machine door with polycarbonate glazing. 30 bar High-Pressure Coolant System (IKZ) For the use of tools with internal coolant supply, switchable to 19 liters/min at 30 bar or 19 liters/min at 15 bar. Complete with separately standing paper band filter. Internal cooling is also possible with air. Clean tank capacity l 500 Filtration grade µm 30 Filter capacity l/min. 120 Hinged Belt Chip Conveyor In place of the chip collection tray with integrated coolant tank, right-side discharge Discharge width approx. mm 300 Discharge height approx. mm 1050 including coolant system Tank capacity liters approx. 150 Conveying capacity l/min. 30 Pump output bar 2.0 Handheld Unit HR 410 HEIDENHAIN External control unit with built-in electronic handwheel, connected via cable to the machine, for manual axis movement, with emergency stop button Centralized Grease Lubrication System Documentation Operation and programming manual Hydraulic and pneumatic circuit diagrams Electrical wiring diagram Test protocol

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Kjdpemt Ed Rjfx Adkolp Drilling capacity 32mm in steel Tapping unit Coolant system Electrics 24V control voltage Emergency stop, dual-channel Safety guard at the drill Completely overhauled in 2025 12 months warranty New paint finish RAL 7035/7031

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PRJ062775, Machining Performance: Drilling capacity in solid St 60 / 40 mm Drilling capacity in solid GG 20 / 50 mm Thread cutting capacity St 60 / M 36 Thread cutting capacity GG 20 / M 42 WORKING AREA: Arm travel (Y-axis) 1,050 mm Column stroke (W-axis) 410 mm Quill stroke (Z-axis) 200 mm Distance spindle nose to tabletop drilling radius 80–690 mm Swivel angle (C-axis) 330 degrees Central clamping of arm and column MACHINE TABLE Clamping surface work table 1,800 x 600 mm With 4 T-slots as per DIN 650 in X-direction (width/spacing) 18 h9 / 125 mm Machine table height 900 mm CONTROL / OPERATION CNC control S-Box III Processor: 32-bit CPU Display: TFT flat screen, backlit and easily readable from all sides. 215 x 160 mm, Cartesian or polar. Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining operation, material-dependent cutting data recommendations Tool management: max. 500 tools Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking, and boring. Chip breaking / chip discharge: possible during drilling cycle Hole patterns: linear row, hole circle, matrix Basic software: Conversational programming, 38 zero points can be stored, rotation and mirroring, teach-in for X, Y, Z. Test graphics: graphical display of hole patterns Data interfaces: V.24 / RS-232-C USB: For reading/writing data with industrial-grade 256 MB memory MAIN SPINDLE DRIVE: Three-phase asynchronous motor, frequency controlled Drive power (100% duty cycle) 5.5 kW Torque (100% duty cycle) 250 Nm Constant from 15–200 rpm Stepless spindle speed range 12–2,800 rpm Tapered spindle: Tool mounting as per DIN 69871 SK40 with pull stud as per DIN 69872-19 AXIS DRIVES C / Y / Z / W axis: max. 0.35 / 0.35 / 2.90 / 2.40 kW Rapid traverse speed, stepless Ksdpfowmcatox Adkslp C-axis max. 4.5 rpm, Y / Z-axis max. 7.5 / 5.0 m/min W-axis max. 3.0 m/min Feed rate, stepless C / Y / Z / W axis: 5–2,000 mm/min Feed force (Z-axis) max. 12,000 N LUBRICATION Central manual lubrication MACHINE ENCLOSURE Protective fence system arranged to enclose the machine, with mesh grid External dimensions 6,000 x 6,000 mm (W x H; system element height approx. 2,000 mm) 1 access point (double-leaf door at the front of the machine, opening width approx. 2,000 mm) Door opened and closed manually. Safety door switch with magnetic lock. ELECTRICAL, PNEUMATIC, HYDRAULIC EQUIPMENT & INSTALLATION POWER Mains connection 400 / 50 Volt / Hz Control voltage 24 Volt Power consumption 13 kVA Protection 35 A Operating voltage: 3 x 400 Volt AC / N / PE +5% -10%. Neutral conductor loadable. Frequency: 50 Hz. PAINTWORK DD textured paint Machine upper section light grey RAL 7035 Machine lower section RAL 5023 TRANSPORT DIMENSIONS Width 1,900 mm Depth 2,565 mm Height 2,788 mm MACHINE WEIGHT Machine as a transport unit with standard table approx. 2,950 kg OPTIONS: Base plate with peripheral coolant channel. Clamping surface 1,000 x 1,400 mm. Height 100 mm with 4 T-slots Electronic probe, incl. SK 40 holder Pick-up tool magazine Programmable tool change for the rear work station. Magazine arrangement with 5 tool spaces including protective cover is mounted at the right-hand side of the machine Coolant device version A: Integrated in the machine base for machines not considering a base plate, consisting of: Coolant tank with a capacity of 35 l, complete coolant pump assembly, flow rate approx. 40 l/min at 0.4 bar.

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 Kledpet Hwwqsfx Adkep - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Klodpfxet Hxago Adkop Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: nepreverjeno (rabljeno), številka stroja/vozila: 6104, Funkcionalnost: nepreverjeno, širina mize: 600 mm, dolžina mize: 1.200 mm, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, največja hitrost vretena: 2.800 obr/min, višina mize: 820 mm, No Reserve Price – Guaranteed Sale to the Highest Bidder! By placing a bid, you commit to collecting the machine within the specified period: 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Machining Capabilities Drilling capacity (solid, St 60): Ø 40 mm Drilling capacity (solid, GG 22): Ø 50 mm Tapping capacity (St 60): M 36 Tapping capacity (GG 22): M 45 Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,200 mm x 600 mm Number of T-slots: 4 T-slots (DIN 650): 18 H7 T-slot spacing: 125 mm Distance spindle nose to table: 185 mm Distance spindle nose to base plate (min.): 985 mm Distance spindle nose to base plate (max.): 1,595 mm Drilling radius: 540 – 1,290 mm Swivel range: 330° Working table height: 820 mm Quill travel: 200 mm Column travel: 410 mm Table Table length: 1,200 mm Table height: 820 mm Table width: 600 mm Rapid Traverse X-axis (at drilling radius 1,000 mm): 5 m/min Y-axis: 4 m/min Spindle Speed: 15 – 2,800 rpm Feed (infinitely variable): 5 – 2,000 mm/min Accuracy as per manufacturer Positioning accuracy X/Y axis: ±0.075 mm Repeatability X/Y axis: ±0.015 mm Play across entire table area: 0.02 mm Positioning accuracy Z axis: ±0.085 mm Repeatability Z axis: ±0.03 mm Kodewvi I Nopfx Adkslp MACHINE DETAILS Overall height: 2,500 mm Overall width: 1,400 mm Overall length: 2,500 mm Total weight: 3,000 kg EQUIPMENT - Two-axis digital readout

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, CNC vrtalno-rezkalni center Donau DANUSYS 2910, letnik 2002, obnovljen Tehnični podatki: Krmiljenje Heidenhain iTNC 530 Pomiki osi X, Y in Z: 2900 / 1000 / 700 mm Rezkanje St 60: 300 cm³/min Klsdpowymtqjfx Adkep Vrtanje v poln material St. 60: ø 40 mm Rezanje navojev: M30 Podajalna hitrost osi X, Y in Z: 7 / 7 / 7 m/min Vreteno HSK 63, 15000 obr/min Hlajenje IKZ in AKZ Menjalec orodij z 32 mesti, razdeljeno na 2 x 16 kosov Obnovljeni deli: - Vreteno popolnoma obnovljeno in na novo navito s strani proizvajalca - Servisiran regulator vretena - Obnovljena napajalna enota Heidenhain - Preverjen glavni računalnik Heidenhain MC422 in krmilna enota CC422 - Zamenjani vozički in vodila osi y Dodatna oprema: Ročni obroč HR 410 Transporter ostružkov z integriranim rezervoarjem za hladilno tekočino Dokumentacija (navodila za uporabo, različni priročniki uporabljenih dokumentov, električna shema itd.) Prodaja iz zaloge; vmesna prodaja pridržana

Stanje: dober (rabljeno), DONAU DR 23 - Hitrotekoča radialna vrtalni stroj - Vrtalna zmogljivost / jeklo cca 28 mm - Doseg 700 mm - Morsejev stožec MK3 - Območje vrtljajev 70-1550 obr/min (menjalnik) - Avtomatski pomiki 0,075-0,3 mm - Naprava za rezanje navojev - Globina vrtanja cca 130 mm - Hidravlična pritrditev - Dokumentacija Dimenzije: DxŠxV 2x1,7x1,9 m / Teža 1900 kg Ksdpoxzqauefx Adkjlp Pridržujemo si pravico do napak in tipkarskih napak

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 133120, Offer 24506 Technical Data: - Drilling capacity in solid steel ST 60: 35 mm - Drilling capacity in cast iron GG 25: 42 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 36 - Spindle taper: MK 4 - Quill stroke: 170 mm - Spindle speed, stepless: 20 – 3200 rpm - Feed, stepless: 0.02 – 0.70 mm/rev - Drilling radius approx. min. / max.: 490 / 1240 mm - Swivel angle: 330° Ksdpfx Aowndydodkjlp - Table size: 1200 x 620 mm - Table height: 900 mm - Motorized height adjustment / Column travel: 450 mm - Hydraulic column and arm clamping - T-slots vertical on the left side of the machine - Coolant system - Drive: 400 V / 5.0 kW - Required space approx. (W x H x D): 1500 x 2600 x 1700–2500 mm - Weight approx.: 2100 kg

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Kljdpfx Asu Et Nbedkep Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 2355-2, Offer 24416 Technical Specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2500 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping Kljdpfxoufw S Re Adkep - Coolant system - T-slots vertical on the left side of the machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, proizvajalec krmilnikov: Heidenhain, TEHNIČNI PODATKI Pomik X: 2.900 mm Pomik Y: 1.000 mm Pomik Z: 700 mm Vpenjalo orodja: SK40 Kodpfx Adjxltfhjkolp Orodni položaji: 32 PODROBNOSTI O STROJU Proizvajalec krmiljenja: Heidenhain OPREMA Transporter za ostružke