Delovno Vreteno nakup rabljenega (3.056)

Stanje: dober (rabljeno), Swing diameter over bed: 380 mm Dsdpfxount Sts Ag Nswc Swing diameter over support: 250 mm Turning length: 600 mm Spindle speed: 90 - 1600 rpm Centre height: 200 mm Total power requirement: 4.2 kW Machine weight: approx. 1.3 t Space requirement: approx. 2.2 x 0.9 x 1.6 m

Stanje: rabljeno, skupna masa: 45.000 kg, največja dovoljena obremenitev: 36.300 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 03/2026, 24 months warranty from initial registration, hydraulically steered, NATO socket, central lubrication system, saddle height 1120 - 1300 mm, loading height 1340 - 1520 mm depending on saddle height, 10 t lashing rings in the outer frame spaced 1,200 mm, overlength sign, remote control, removable LED beacon, 220V socket, extension lights, 3-axle telescopic semi-trailer, extendable once up to 7,500 mm (in 500 mm steps), loading floor 28 mm hardwood, 10 t lashing rings in the outer frame (spacing 1,200 mm), stake pockets in the outer frame for stakes 81 x 51 mm, removable front wall made of steel, 1,800 mm high. Dsdpjmhd Rysfx Ag Nswc

Stanje: zelo dobro (rabljeno), Manufacturer: Indramat Spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Rated power (Pn): 19 kW Peak power (Pkb): 27 kW Nominal speed (nN): 700 rpm Dwodpjv U Ag Defx Ag Noc Maximum speed (nmax): 6000 rpm Condition: Used, fully functional 2 units available in stock.

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 32.920 kg, konfiguracija osi: 3 osi, prva registracija: 01/2025, Oprema: ABS, Kögel SF24 Planjava !!! KOT NOVO !!! 3 osi, zračno vzmetenje z eno dvižno osjo, škatla za palete, 8 kolov, žepi za kole, twist-locki za kontejnerje, 4 izvlečne opozorilne table s pozicijsko razsvetljavo, kolutne zavore, ABS. Dsdpfx Agjxdupro Nswc Nosilnost: 32.920 kg.

Stanje: novo, skupna masa: 39.000 kg, največja dovoljena obremenitev: 31.830 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, Leto izdelave: 2025, skupna širina: 2.550 mm, skupna višina: 2.970 mm, Oprema: ABS, Brand new Kässbohrer platform trailer Available immediately! * BPW axles * Disc brakes * Lift axle * Twistlocks for 1 x 40' container, 2 x 20' containers, 1 x 20' container centered * Heavy-duty lashing rings Dwsdpfxoqafz Ij Ag Njc * Perforated outer frame * 800 mm drop sides * Transport brackets for dropsides and stakes * Plug-in stakes with transport holder * Stake pockets in the floor * Stainless steel toolbox * Illuminated oversize warning boards * Rotating warning beacon Please feel free to contact us for further information.

Stanje: dober (rabljeno), WEILER LZ 330 / Iz izobraževalne ustanove - Premer struženja nad ležiščem: 330 mm - Premer struženja nad podporo: 165 mm - Dolžina struženja: 800 mm - Območje vrtljajev / menjalnik: 25–2800 min⁻¹ - Avtomatski vzdolžni in prečni pomiki - Prehod vretena: 38 mm - Trivečeljustna glava - Priprava za vpenjalne puše, vključno z 20 pušami - Držalo orodij Multifix, vklj. 3 vložki - Kopirna naprava - Različen pribor - Dokumentacija Dimenzije: Djdpfx Agjxf Uf Ns Nowc D x Š x V 1,8 x 0,7 x 1,6 m / Teža 750 kg Pridržujemo si pravico do napak ali tipkarskih napak

Stanje: dober (rabljeno), Vreteno / Spindle Dsdpfxjp I T Rqs Ag Nowc 3,5 - 16 - 10 kVA 2750 - 14660 - 23660 obr/min Ogled je možen po predhodnem dogovoru v mojem skladišču!

Stanje: novo, Leto izdelave: 2025, Swing diameter over bed 400 mm Swing diameter over cross-slide 246 mm Turning length 1250 mm Centre height 195 mm Spindle bore 54 mm Drive power 7.5 kW - New machine - - Handwheel on the left of the cross-slide with 3-axis digital readout FAGOR INNOVA 30iT and micrometer for bed Dwedpowp Tbgefx Ag Nsc * For more information about the precise standard configuration and available options, please visit our website or contact us directly *

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter 18 (16) mm Control system Siemens Spindle circle diameter 180 mm Maximum bar feed 80 mm Longitudinal slide travel 50 (63) mm Cross slide travel 20 (32) mm Spindle speed 800 – 8,000 rpm Main spindle drive power 11 kW Torque 18 Nm Space requirement approx. 6.0 x 1.5 x 2.2 m Machine weight approx. 5.5 t CNC bar automatic lathe SCHÜTTE – SG 18 Dwodpsvanqrsfx Ag Noc - CO2 fire extinguishing system Kraft&Bauer - Ruez scraper belt conveyor - IEMCA bar loader PRA 52 42 F - Tool package - Cam package - Various clamping devices

Stanje: novo, skupna masa: 48.000 kg, največja dovoljena obremenitev: 38.400 kg, konfiguracija osi: 3 osi, Oprema: ABS, Equipment Summary Loading Platform: - Loading platform in extendable design with pneumatically operated locking mechanism. - Loading area made of approx. 30 mm thick wooden planks. - 7 pairs of fold-out lashing rings (LC 5,000 daN). - 3 pairs of fold-out lashing rings (LC 10,000 daN). - Cut-outs in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN). Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t). Tyres: - Tyres: 385/65 R 22.5, brand of our choice. Dwodpfx Ajxl Nf Dsg Nec Axles: - BPW axles and suspension; all axles hydro-mechanically forced steered. - With disc brakes. - Technical axle load: 10,000 kg (ET 0). - Air suspension with lift/lower valve. Braking System: - WABCO braking system in accordance with EU regulations, with EBS-E (2S2M), no connecting lines to the tractor unit. Paintwork: - High-quality 2-component (2K) top coat, single-colour, RAL 3002 Carmine Red. Accessories: - Remote steering (front and rear) via cable remote control with push buttons, with axle tracking monitoring (without installation in tractor unit). - Electro-hydraulic unit (approx. ± 45kg). - 4 wheel chocks with holder on front bulkhead (approx. ± 5kg). - 2-inch king pin. - Yellow-red air couplings at the galvanised front connector bar. - Holder for one rotating beacon at the rear of the trailer. - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the platform (approx. ± 30kg). - 1 spare wheel carrier mounted under the loading platform on the right (without spare wheel). - Load gauge/axle load manometer including load chart. Including Special Accessories - Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high (approx. ± 35kg). - 6 pairs of WADER container locks in the loading surface for 1 x 20', 2 x 20', or 1 x 40' container; an additional locking position in the extension for a 45' container (approx. ± 90kg). - 4 pairs of crosswise stake pocket rails mounted in the loading platform for plug-in stanchions 100 x 50 mm (approx. ± 145kg). - Storage for up to 9 pairs of plug-in stanchions mounted inside on the front bulkhead (approx. ± 34kg). - Access ladder mounted left and right in direction of travel (approx. ± 24kg). - One INOX toolbox approx. 1,200x460x550 mm, front left under the platform (approx. ± 75kg). - One additional INOX toolbox, approx. 1,200x460x550 mm, under the platform, left side (approx. ± 75kg). - Loading platform with approx. 30 mm thick wooden floor, framed in omega profiles. - Lift axle on the front axle controlled by TEBS E. - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2. - 2 LED reversing lights mounted on the rear plate. - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (approx. ± 16kg). - HRM Metallisation (High Resistance Metallisation).

Stanje: rabljeno, prevoženi kilometri: 174.048 km, moč: 159 kW (216,18 KM), prva registracija: 12/1986, skupna masa: 24.000 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 3 osi, vrsta prenosa: mehanski, skupna širina: 2.500 mm, skupna višina: 3.650 mm, RUTHMANN aerial platform, Type: MTS 260, Year of manufacture: 1984, four-way hydraulic extendable and support outriggers, 3-stage hydraulically extendable, lifting height approx. 26.00 m, working height approx. 27.50 - 28.00 m, transport height (retracted) approx. 3.60 m, lateral outreach approx. 24.00 m, 360-degree rotation, platform load capacity 250 kg, emergency lowering system, double insulation up to max. 1,000 volts, auxiliary drive, differential lock, heated exterior mirrors, access window, roof hatch, static driver’s seat with height and tilt adjustment, middle seat, rotating beacon, battery disconnect switch, leaf spring suspension. Vehicle may be fitted with promotional decals and/or lettering. Dodsvnpl Tspfx Ag Nowc Our offer is generally without a new TÜV inspection. Should a new TÜV inspection be required, we are happy to provide you with an offer from our partner workshops! Vehicle may be fitted with promotional decals and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please do not hesitate to contact us!

Stanje: rabljeno, prevoženi kilometri: 135.000 km, moč: 130 kW (176,75 KM), prva registracija: 03/2015, skupna masa: 7.500 kg, vrsta goriva: dizel, barva: bela, Leto izdelave: 2015, Dvižna delovna ploščad Dodpjxlv Hhefx Ag Nswc 15 metrov delovne višine Comilev EN 150TPC

Stanje: dober (rabljeno), machine spindle, precision spindle, double grinding bench spindle, precision spindle for belt drive, belt-driven spindle, grinding spindle - Manufacturer: Voumard, grinding spindle, precision spindle - Model: C 40-9 D - Mount: M6 - Dimensions: Ø 90 x 335 mm - Transport box dimensions: 480/320/H225 mm Djdjwub Ifopfx Ag Njwc - Weight: 17.8 kg.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 82.000 km, moč: 110 kW (149,56 KM), prva registracija: 06/2011, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 2 osi, Leto izdelave: 2011, Oprema: žerjav, NISSAN CABSTAR 35q, letnik 2011, z le 82.000 km. Opremljen s PM dvigalom in daljinskim upravljalnikom. Vozilo v odličnem stanju – en lastnik. Dwodpexfkmpefx Ag Nsc

Stanje: rabljeno, prevoženi kilometri: 155.000 km, moč: 130 kW (176,75 KM), prva registracija: 02/2002, skupna masa: 10.500 kg, vrsta goriva: dizel, barva: modra, konfiguracija osi: 2 osi, vrsta prenosa: mehanski, emisijski razred: euro2, skupna širina: 2.550 mm, skupna višina: 3.560 mm, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, * Mercedes Benz 1018 pogon na vsa štiri kolesa 4x4 z delovno ploščadjo Wumag WH 170 H - * Dizelski motor - prostornina: 4.249 cm³ - 130 kW / 178 KM - Euro 2 - rdeča oznaka - * Nemško vozilo - nemška prometna dovoljenja - takoj na voljo - * Lastna masa: 9.160 kg - Dovoljena skupna masa: 10.500 kg - s klimatsko napravo - * Vozilo je takoj na voljo in pripravljeno za prevzem * Za ogled prosimo, da se dogovorite za termin - * Kontaktna oseba: gospod Andreas Vogel Dwsdpfjxglb Dox Ag Nec * Podatki na internetu so neobvezujoči opisi. * Ne predstavljajo zajamčenih lastnosti. * Prodajalec ne odgovarja za tipkarske napake ali napake pri prenosu podatkov. * Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: novo, skupna masa: 53.000 kg, največja dovoljena obremenitev: 45.115 kg, konfiguracija osi: 3 osi, Oprema: ABS, Further vehicles available at Excerpt from the equipment. Full equipment details on request. Dwodpfx Agjxl Nf Rs Nec Loading platform: Loading platform with approx. 30 mm thick hardwood floor. 8 pairs of fold-out lashing rings (LC 10,000 daN). Landing legs: JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Tyres: 385/65 R 22.5 – brand of our choice TPMS: TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the towing vehicle via the standardised EBS interface according to ISO 11992. The towing vehicle must be able to receive and display this data correctly. Axles and suspension: BPW axles, technical capacity 10,000 kg each. 1st and 3rd axle hydro-mechanically forced steered, mounted on turntable. 2nd axle fixed. Air suspension with raise/lower valve. Axle tools included. Braking system: Wabco brake system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting, ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connections compliant to: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa). Paintwork: Complete steel structure is automatically blast-cleaned with a shot-blasting system after welding. Additional blasting with corundum for optimal coating adhesion. Final painting with two coats of 2K topcoat, single colour in RAL 3002 Carmine red, in accordance with RAL system 841GL. Rear section metallised and painted RAL 9010 (Pure White). Wheel rims in silver. Metallic paint not possible. Paint system tested by salt spray test to ISO 9227-NSS. Cavities sealed with special wax. Accessories: - Loading platform with approx. 30 mm thick hardwood floor (± 270kg) - 2-inch king pin - One galvanised steel front wall (EN12642-XL), approx. 1,200 mm high - Yellow-red air couplings on the galvanised front connection rail - 4 wheel chocks with holders on the front wall (± 5kg) - Storage for approx. 1,000 mm stake posts in the rear centre beam - Bracket holders for warning signs with socket provided on the gooseneck and rear left/right - Yellow reflector tape to EU regulations on the sides and rear of the trailer - 10 pairs of stake pockets for approx. 100 x 50 mm stake posts in the outer frame (± 30kg) - European reflector plates (red-yellow) at the rear of the trailer - Bracket for beacon at the rear of the trailer - Splash guard at the rear of the trailer - Manual and documentation on USB stick - 80 km/h speed stickers rear and on both sides - Electro-hydraulic power pack (± 45kg) - 1 shunting coupling with reinforcement bolted to rear cross-member - Axle load gauge including load chart Central lubricating system BEKAMAX (Pico) with NLGI-2 multipurpose grease and removable protective cover for the pump (± 18kg) Remote steering from the front and rear with cable remote, operated via pushbuttons, with single-track control of the axles (without installation in the tractor unit) 7 pairs of galvanised stake posts approx. 100 x 50 mm, approx. 1,000 mm high (± 154kg) 4 pairs of crosswise stake pocket strips mounted on the loading platform for approx. 100 x 50 mm stake posts (± 145kg)

Stanje: rabljeno, prevoženi kilometri: 45.650 km, moč: 90 kW (122,37 KM), prva registracija: 04/2014, skupna masa: 3.500 kg, vrsta goriva: dizel, naslednji pregled (TÜV): 11/2025, vrsta prenosa: mehanski, Leto izdelave: 2014, skupna dolžina: 6.750 mm, skupna širina: 2.100 mm, skupna višina: 2.750 mm, število sedežev: 3, Oprema: ABS, centralno zaklepanje, 3.5 t truck-mounted aerial work platform Renault Maxity with Multitel 160 ALU DS - Self-propelled work machine Dedpfx Agev Rugno Nowc - Superstructure: Multitel 160 ALU DS - First registration: 03/2014 - Mileage: 45,650 km and 3,545 operating hours (according to odometer) - Max. working height: 16 m - Platform height: 14 m - Max. lateral outreach: 9.9 m - 2-stage telescopic boom with basket arm – aluminium construction - Powered by 4-cylinder diesel engine, 90 kW / 122 hp - Engine displacement: 3,600 cm³ - Manual 5-speed transmission - Single cab with 2 seats - Tyre size: 195/70 R 15C, tread depth 5–7 mm - Wheelbase: 3,450 mm - Drive configuration: 4x2 - Overall dimensions (L x W x H): 6,750 x 2,100 x 2,750 mm - Gross vehicle weight: 3,500 kg - Basket load capacity: 200 kg - Basket dimensions (L x W x H): 1,340 x 640 x 1,100 mm - Hydraulic 4-point outrigger system - Outrigger footprint (L x W): 3,450 x 2,100 mm - 230 V power supply in basket, rotating basket, basket and ground controls - ABS, PTO (power take-off), remote start/stop, beacon, spare wheel, power steering Further information and additional photos available on request. This description does not represent a binding offer and may contain errors; no guarantee on the accuracy of all details. Please also visit our homepage.

Stanje: rabljeno, Univerzalna izdolbna glava STANKO Vreteno orodje, vretenasta glava Orodni nosilec: SK 40 - M16 Sprejem nastavitvene puše: Ø 36 mm Obseg nastavitve: 17,5 mm Natančnost nastavitve: 0,01 mm Dwodpfx Agexciv Dj Nec Steblo orodja: Ø 18/22 mm Obdelovalni premer: ca. 10-45 mm - Adapter SK40 za nastavitveno pušo Ø 36 mm - Izdolbna glava z nastavkom puše Ø 36 mm Lastna teža: 5 kg zelo dobro stanje

Stanje: rabljeno, Leto izdelave: 2007, Premer struženja nad ležiščem 280 mm Premer struženja nad suportom 150 mm Dolžina struženja 500 mm Višina konic nad ležiščem 140 mm Razdalja med konicama 500 mm Širina ležišča 205 mm Vrtina vretena 40 mm Območje vrtljajev – brezstopenjsko 30 – 4.000 min⁻¹ 3-čeljustna glava, premer 160 mm Hitromenjalni nosilec MULTIFIX tip A Moč pogonskega motorja vretena 4,0 kW Vpenjalni stožec v konjički MK 3 Premer pinole 40 mm Dwsdpsxb Ednefx Ag Njc Hod pinole 85 mm Obratovalna napetost 400 V Skupna potrebna moč 7,5 kW Teža stroja cca. 800 kg Potrebni prostor cca. 1,80 x 0,95 x 1,55 m Stroj v odličnem stanju!!! - Tovarniška št.: CE.01 - 3-osni digitalni prikaz SIEMENS - Naprava za napenjalne tulec - Napenjalne tulce 1 – 24 mm - Hitri menjavalec orodij MULTIFIX - Različni nosilci orodja - Hitrovpenjalna vrtalna glava Ø 3 – 16 mm - Naprava za hlajenje

Stanje: skoraj kot novo (rabljeno), Spindle support bearing Manufacturer: Union Reach: 600 mm Spindle diameter: 130 mm Dedpedvvtlefx Ag Nswc

Stanje: zelo dobro (rabljeno), TOS-TRENCIN SV 18 RA – Soustruh s vodicím a tažným vřetenem K prodeji je soustruh s vodicím a tažným vřetenem výrobce TOS-TRENCIN, typ SV 18 RA. Stroj je ve vynikajícím stavu a pochází z vývojového oddělení VEB v Neubrandenburgu (nikdy nebyl používaný v sériové výrobě). ⸻ Technické údaje • Průměr otáčení nad ložem: 360 mm • Průměr otáčení nad suportem: 215 mm • Točná délka: 1 050 mm • Průměr otvoru vřetene: 40 mm • Vzdálenost mezi hroty: 900 mm • Rozsah otáček: 14–2 800 ot/min (21 stupňů) • Výška hrotu: 180 mm • Celkový příkon: 6,5 kW • Hmotnost stroje: cca 1,9 t • Potřebný prostor (D׊×V): cca 2,9 × 1,0 × 1,2 m ⸻ Stroj je ihned připravený k provozu. • Prohlídka možná kdykoliv • Nakládka a doprava bez problémů ⸻ Kontakt Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 Všechny ceny bez DPH, změny a omyly vyhrazeny. Djdpfsxk Tyiex Ag Newc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, vrsta prenosa: mehanski, Leto izdelave: 2025, Transporter-mounted Aerial Work Platform Multitel MZ 250 on IVECO Chassis Stock unit, year of manufacture 2025, as new condition Max. working height: 25.10 m Max. lateral outreach: 10.35 m (at 250 kg), 14.35 m (at 80 kg) Transport dimensions (L/W/H): 6.33 / 2.25 / 2.90 m Max. platform load: 250 kg Dwjdpfx Ajxhfwzsg Njc Unladen weight: 3,500 kg Chassis: IVECO 35S14H MY 2024 Year of manufacture 2025, EURO 6e, radio, M+S tyres Colour: white Features: - Articulated telescopic system with aluminium boom - Variable hydraulic outriggers - Fully proportional electrohydraulic controls - Platform dimensions: 1.40 x 0.70 x 1.10 m (250 kg) - Slewing range +/- 450° - Basket rotation +/- 90° - One-touch return to transport position (home function) - One-touch turret centering - One-touch automatic levelling - Articulating platform arm - Basket and ground controls - Emergency hand pump - 5 years’ telemetry Special features: 230V socket in the platform, rotating turret warning light, 200 mm aluminium side panel, outrigger pads Ex stock Langenhagen All information provided about the offered vehicle is subject to change and not guaranteed. Errors, omissions, and prior sale excepted. Lease offers available through partner firms.

Stanje: rabljeno, prevoženi kilometri: 93.062 km, moč: 90 kW (122,37 KM), prva registracija: 05/2014, skupna masa: 3.500 kg, vrsta goriva: dizel, naslednji pregled (TÜV): 05/2026, vrsta prenosa: mehanski, Leto izdelave: 2014, skupna dolžina: 6.950 mm, skupna širina: 2.250 mm, skupna višina: 2.950 mm, število sedežev: 3, Oprema: ABS, centralno zaklepanje, 3.5t Truck-Mounted Aerial Platform Nissan NT400 Cabstar with Palfinger P210BK Self-Propelled Work Machine * Superstructure - Palfinger P210BK Dwedpswqvdgofx Ag Nec * Chassis - Nissan Cabstar NT400 * First registered: 06/2014 * Mileage: 93,062 km (according to odometer) * Max. working height: 21 m * Platform height: 19 m * Max. lateral outreach: 13.3 m * 2-stage telescopic boom plus basket boom - aluminium construction * Driven by 4-cylinder diesel engine with 90 kW / 122 HP * Displacement: 2,488 cm³ * 5-speed manual transmission * Single cab with 3 seats * Tyres: 195/70 R 15C, tread depth 6–8 mm * Wheelbase: 2,900 mm * Drive layout: 4x2 * Overall dimensions (L x W x H): 6,950 x 2,250 x 2,950 mm * Gross vehicle weight: 3,500 kg * Basket load capacity: 230 kg * Basket dimensions (L x W x H): 1,400 x 650 x 1,100 mm * Hydraulic 4-point outriggers, variable * Outrigger dimensions (L): 4,000 mm, (W): 3,600 mm * Home function, automatic leveling * Basket boom: 1,900 mm * 230 V power supply in basket, rotating basket, basket and ground controls * ABS, PTO, remote start/stop, rotating beacon, spare wheel, power steering Further information and additional pictures are available on request. This description does not constitute a binding offer and may contain errors. No guarantee is given for the accuracy of all details. Please also visit our homepage.

Stanje: rabljeno, Attention -- deux modèles disponibles Modèle : 1FK6044-7AH71-1EG0 Modèle : 1FK7044-7AH71-1EG0 Vis à billes avec servomoteur SIEMENS Guidage linéaire avec servomoteur permanent SIEMENS Modèle : 1FK6044-7AH71-1EG0 Modèle : 1FK7044-7AH71-1EG0 Numéro d’identification : YF RN22 5076 01 001 Année de fabrication : 2003 Course de l’axe : 540 mm Longueur totale : 900 mm Diamètre de l’arbre : 40 mm Pas de vis : 40 mm Diamètre des billes : env. 6 mm - Unité compacte avec servomoteur et écrou à billes - Vis à billes guidée sans rotation, entraînement par l’écrou - Vis à billes Ø 40 mm (arbre creux, diamètre intérieur env. 22 mm) - Servomoteur permanent SIEMENS Modèle : 1FK6044-7AH71-1EG0 Dwjdogi E Hdopfx Ag Noc (Numéro de série : numéro d’identification YF RN22 5076 01 001) Dimensions totales (L x l x h) : 900 x 200 x 330 mm Poids : 30 kg Bon état Démontée d’une machine spéciale en parfait état de fonctionnement, testée avant démontage. 8 unités disponibles Le prix indiqué est pour 1 unité

Stanje: zelo dobro (rabljeno), High-frequency spindle Manufacturer: Precise Model: SC 60121 Speed: 7,500 – 30,000 rpm Frequency: 250–1000 Hz Voltage: 88–250 V Power: 13 kW Diameter: 120 mm Total length: 420 mm Weight: 22 kg Dwsdpfeu Numvsx Ag Njc